dmesg
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (p
rerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003feea000 (ACPI data)
BIOS-e820: 000000003feea000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 261856
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32480 pages, LIFO batch:15
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6bd0
ACPI: RSDT (v001 PTLTD Wistron 0x06040000 LTP 0x00000000) @ 0x3fee39c9
ACPI: FADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fee9e88
ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fee9efc
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fee9fd8
ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fee9f9c
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20030224) @ 0x3fee48c1
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20030224) @ 0x3fee422f
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x3fee3dea
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x3fee3c0c
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x3fee3a11
ACPI: DSDT (v001 INTEL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: local apic disabled
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda8 vga=0x314 selinux=0 resume=/dev/sda7 spl
ash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1729.419 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032336k/1047424k available (2028k kernel code, 14124k reserved, 700k da
ta, 204k init, 129920k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3463.44 BogoMIPS (lpj=6926886)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180
00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 0
0000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 0000000
0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1729k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0c00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd78e, last bus=8
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Embedded Controller [EC0] (gpe 23)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c0100000-c01fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: c4000000-c7ffffff
PREFETCH window: d8000000-dbffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00005000-00005fff
IO window: 00006000-00006fff
PREFETCH window: 40000000-41ffffff
MEM window: 46000000-47ffffff
PCI: Bus 11, cardbus bridge: 0000:06:09.1
IO window: 00007000-00007fff
IO window: 00008000-00008fff
PREFETCH window: 42000000-43ffffff
MEM window: 48000000-49ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: c8000000-c80fffff
PREFETCH window: 40000000-44ffffff
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ
10
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ
11
ACPI: PCI Interrupt 0000:06:09.1[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ
11
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1138122834.024:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ
10
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 1638
4k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:ae4a
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 byt
es,<6>...found (800x600, 8809 bytes, v3).
Console: switching to colour frame buffer device 99x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 controller has invalid data port 0x0; using default 0x60
PNP: PS/2 controller has invalid command port 0x0; using default 0x64
PNP: PS/2 controller doesn't have KBD irq; using default 0x1
PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
LID0 SLPB AZAL RP01 RP02 RP03 RP04 LANB MODM
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 204k freed
SCSI subsystem initialized
libata version 1.12 loaded.
input: AT Translated Set 2 keyboard on isa0060/serio0
ahci version 1.01
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ
11
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ahci: probe of 0000:00:1f.2 failed with error -12
ata_piix version 1.04
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14
ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6023 85:3c69 86:3d01 87:6003 88:203f
ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: SAMSUNG HM100JC Rev: YN10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
SCSI device sda: drive cache: write back
sda:<6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x280b1, caps: 0xb04713/0x600
40d
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Vendor: MATSHITA Model: DVD-RAM UJ-841S Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 05
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
ACPI: Thermal Zone [TZS0] (33 C)
ACPI: Thermal Zone [TZS1] (24 C)
Attempting manual resume
swsusp: Suspend partition has wrong signature?
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 1052216k swap on /dev/sda7. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NTFS driver 2.1.23 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8183 buckets, 65464 max) - 248 bytes per conntrack
pnp: Device 00:06 activated.
parport: PnPBIOS parport detected.
pnp: Device 00:06 disabled.
lp: driver loaded but no devices found
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ
10
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001860
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hw_random: RNG not detected
usb 2-2: new low speed USB device using uhci_hcd and address 2
ieee80211_crypt: module not supported by Novell, setting U taint flag.
ieee80211_crypt: registered algorithm 'NULL'
usb 3-2: new full speed USB device using uhci_hcd and address 2
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0004000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ
11
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xf8d90000, 00:0a:e4:ae:60:de, IRQ 11
usb 2-2: USB disconnect, address 2
ieee80211: module not supported by Novell, setting U taint flag.
ieee80211: 802.11 data/management/control stack, 1.0.3
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ
11
Yenta: CardBus bridge found at 0000:06:09.0 [17c0:3007]
usb 3-2: USB disconnect, address 2
ieee1394: Initialized config rom entry `ip1394'
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000820
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
ACPI: PCI Interrupt 0000:06:09.1[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ
11
Yenta: CardBus bridge found at 0000:06:09.1 [17c0:3007]
ipw2200: module not supported by Novell, setting U taint flag.
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:06:09.2[C] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ
11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c8007800-c8007fff] Max
Packet=[2048]
usb 2-2: new low speed USB device using uhci_hcd and address 3
Linux video capture interface: v1.00
bootsplash: status on console 0 changed to on
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
lirc_dev: module not supported by Novell, setting U taint flag.
lirc_dev: IR Remote Control driver registered, at major 60
lirc_atiusb: module not supported by Novell, setting U taint flag.
lirc_atiusb: USB remote driver for LIRC v0.4
lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
usb 3-2: new full speed USB device using uhci_hcd and address 3
saa7130/34: v4l2 driver version 0.2.14 loaded
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ
11
saa7134[0]: found at 0000:07:00.0, rev: 1, irq: 11, latency: 0, mmio: 0x46000000
PCI: Setting latency timer of device 0000:07:00.0 to 64
saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
saa7134[0]: board init: gpio is 0
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_atiusb[3]: X10 WTI RF receiver on usb2:3
usbcore: registered new driver lirc_atiusb
saa7134[0]: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b
saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
saa7134[0] Board has DVB-T
saa7134[0] Tuner type is 63
ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a004c411039]
usb 4-1: new full speed USB device using uhci_hcd and address 2
: chip found @ 0xc2 (saa7134[0])
tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
usbcore: registered new driver ati_remote
drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Cont
rol v. 2.2.1
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xa00-0xaff: clean.
tda9885/6/7: chip found @ 0x86
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
NET: Registered protocol family 17
eth1: no IPv6 routers present
ACPI: AC Adapter [ADP1] (on-line)
hda_codec: num_steps = 0 for NID=0x8
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
bootsplash: status on console 0 changed to on
bootsplash: status on console 0 changed to on
hda_codec: num_steps = 0 for NID=0xb
hda_codec: num_steps = 0 for NID=0xb
ieee80211_crypt_tkip: module not supported by Novell, setting U taint flag.
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt_ccmp: module not supported by Novell, setting U taint flag.
ieee80211_crypt: registered algorithm 'CCMP'
r8169: eth0: link up
eth0: no IPv6 routers present
r8169: eth0: link up
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=10 7 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=10 7 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=10 7 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
eth1: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=10 7 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=10 7 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=10 7 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
hda_codec: num_steps = 0 for NID=0xb