PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Mail-Server (Postfix und Cyurs) E-Mail nicht abrufbar



triptrop
14.12.05, 11:22
Hallo :)

Ich habe einen Mail-Server mit:

- Suse 9,2
- Postfix
- Cyrus

nach tagelangem durchforsten von verschiedenen HowTo's installiert. :ugly:

Nun habe ich auf einem Client-Notebook Outlook mit den Daten des Servers eingerichtet und eine E-Mail an mich selbst geschrieben. Die E-Mail geht ohne Fehlermeldung raus :)

Wenn ich aber dann auf E-Mail-Abrufen klicke, ruft er zwar ohne Fehlermeldung ab, aber ich erhalte die E-Mail nicht :(

Ich habe einfach keine Idee mehr, was es sein könnte...

Vielen Dank schonmal für die Hilfe



Hier die Logdateien für Cyrus: und Postfix:



Dec 14 10:51:42 mail-server master[4352]: SLPderegister [service:imap://mail-server.:143]
Dec 14 10:51:42 mail-server master[4352]: SLPderegister [service:pop3://mail-server.:110]
Dec 14 10:51:42 mail-server master[4352]: SLPderegister [service:sieve://mail-server.:2000]
Dec 14 10:51:42 mail-server master[4352]: exiting on SIGTERM/SIGINT
Dec 14 10:51:58 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 10:52:43 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 10:54:36 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 10:55:24 mail-server master[4397]: setrlimit: Unable to set file descriptors limit to -1: Operation not permitted
Dec 14 10:55:24 mail-server master[4397]: retrying with 1024 (current max)
Dec 14 10:55:24 mail-server master[4397]: process started
Dec 14 10:55:24 mail-server master[4398]: about to exec /usr/lib/cyrus/bin/ctl_cyrusdb
Dec 14 10:55:24 mail-server ctl_cyrusdb[4398]: recovering cyrus databases
Dec 14 10:55:24 mail-server ctl_cyrusdb[4398]: skiplist: recovered /var/lib/imap/mailboxes.db (2 records, 424 bytes) in 0 seconds
Dec 14 10:55:24 mail-server ctl_cyrusdb[4398]: skiplist: recovered /var/lib/imap/annotations.db (0 records, 144 bytes) in 0 seconds
Dec 14 10:55:24 mail-server ctl_cyrusdb[4398]: done recovering cyrus databases
Dec 14 10:55:24 mail-server master[4399]: about to exec /usr/lib/cyrus/bin/idled
Dec 14 10:55:24 mail-server master[4397]: SLPRegister [service:imap://mail-server.:143]
Dec 14 10:55:24 mail-server master[4397]: Error registering service with slp -20
Dec 14 10:55:24 mail-server master[4397]: SLPRegister [service:pop3://mail-server.:110]
Dec 14 10:55:24 mail-server master[4397]: Error registering service with slp -20
Dec 14 10:55:24 mail-server master[4397]: SLPRegister [service:sieve://mail-server.:2000]
Dec 14 10:55:24 mail-server master[4397]: Error registering service with slp -20
Dec 14 10:55:24 mail-server master[4397]: ready for work
Dec 14 10:55:24 mail-server master[4401]: about to exec /usr/lib/cyrus/bin/ctl_cyrusdb
Dec 14 10:55:24 mail-server ctl_cyrusdb[4401]: checkpointing cyrus databases
Dec 14 10:55:24 mail-server ctl_cyrusdb[4401]: archiving database file: /var/lib/imap/annotations.db
Dec 14 10:55:24 mail-server ctl_cyrusdb[4401]: archiving log file: /var/lib/imap/db/log.0000000001
Dec 14 10:55:24 mail-server ctl_cyrusdb[4401]: archiving database file: /var/lib/imap/mailboxes.db
Dec 14 10:55:24 mail-server ctl_cyrusdb[4401]: archiving log file: /var/lib/imap/db/log.0000000001
Dec 14 10:55:24 mail-server ctl_cyrusdb[4401]: done checkpointing cyrus databases
Dec 14 10:55:24 mail-server master[4397]: process 4401 exited, status 0
Dec 14 10:55:37 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 10:55:47 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 10:57:32 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 10:57:34 mail-server master[4404]: about to exec /usr/lib/cyrus/bin/pop3d
Dec 14 10:57:34 mail-server pop3[4404]: executed
Dec 14 10:57:34 mail-server pop3[4404]: accepted connection
Dec 14 10:57:34 mail-server pop3[4404]: login: [172.16.201.216] rplan plaintext User logged in
Dec 14 10:58:34 mail-server master[4397]: process 4404 exited, status 0
Dec 14 10:59:01 mail-server /usr/sbin/cron[4413]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Dec 14 10:59:43 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 11:00:50 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 11:01:42 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received






Dec 14 10:50:44 mail-server postfix/postfix-script: starting the Postfix mail system
Dec 14 10:50:44 mail-server postfix/master[4323]: daemon started -- version 2.1.5
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: mynetworks ~? debug_peer_list
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: mynetworks ~? fast_flush_domains
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: mynetworks ~? mynetworks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: relay_domains ~? debug_peer_list
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: relay_domains ~? fast_flush_domains
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: relay_domains ~? mynetworks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: relay_domains ~? permit_mx_backup_networks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: relay_domains ~? qmqpd_authorized_clients
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: relay_domains ~? relay_domains
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: permit_mx_backup_networks ~? debug_peer_list
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: permit_mx_backup_networks ~? fast_flush_domains
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: permit_mx_backup_networks ~? mynetworks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: permit_mx_backup_networks ~? permit_mx_backup_networks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: connect to subsystem private/proxymap
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr request = open
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr table = unix:passwd.byname
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr flags = 64
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/proxymap socket: wanted attribute: status
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: status
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: 0
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/proxymap socket: wanted attribute: flags
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: flags
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: 80
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/proxymap socket: wanted attribute: (list terminator)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: (end)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: dict_proxy_open: connect to map=unix:passwd.byname status=0 server_flags=0120
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: dict_open: proxy:unix:passwd.byname
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: dict_open: hash:/etc/aliases
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: dict_open: hash:/etc/postfix/canonical
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: dict_open: hash:/etc/postfix/virtual
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: smtpd_access_maps ~? debug_peer_list
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: smtpd_access_maps ~? fast_flush_domains
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: smtpd_access_maps ~? mynetworks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: smtpd_access_maps ~? permit_mx_backup_networks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: smtpd_access_maps ~? qmqpd_authorized_clients
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: smtpd_access_maps ~? relay_domains
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: smtpd_access_maps ~? smtpd_access_maps
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: dict_open: hash:/etc/postfix/access
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: fast_flush_domains ~? debug_peer_list
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_string: fast_flush_domains ~? fast_flush_domains
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_create: 0x80a9188 18000
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_stop: 0x80a9188
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_start: 0x80a9188
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: connection established
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: master_notify: status 0
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: name_mask: resource
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: name_mask: software
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: connect from unknown[172.16.201.216]
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_list_match: unknown: no match
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_list_match: 172.16.201.216: no match
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_list_match: unknown: no match
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_list_match: 172.16.201.216: no match
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: > unknown[172.16.201.216]: 220 mail-server.meinedomain.de ESMTP Postfix
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_pat: 0x80a9188
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: < unknown[172.16.201.216]: HELO paltz
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: > unknown[172.16.201.216]: 250 mail-server.meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_pat: 0x80a9188
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: < unknown[172.16.201.216]: MAIL FROM: <meine_email@meinedomain.de>
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: extract_addr: input: <meine_email@meinedomain.de>
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: smtpd_check_addr: addr=meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: connect to subsystem private/rewrite
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr request = rewrite
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr rule = canonicalize
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr address = meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: address
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: address
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: (end)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: rewrite_clnt: canonicalize: meine_email@meinedomain.de -> meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr request = resolve
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr address = meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: transport
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: transport
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: smtp
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: nexthop
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: nexthop
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: recipient
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: recipient
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: flags
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: flags
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: 4096
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: (end)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: resolve_clnt: `meine_email@meinedomain.de' -> transp=`smtp' host=`meinedomain.de' rcpt=`meine_email@meinedomain.de' flags= class=default
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: ctable_locate: install entry key meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: extract_addr: result: meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: fsspace: .: block size 4096, blocks free 18144182
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: smtpd_check_size: blocks 4096 avail 18144182 min_free 0 msg_size_limit 16777216
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: > unknown[172.16.201.216]: 250 Ok
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_pat: 0x80a9188
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: < unknown[172.16.201.216]: RCPT TO: <meine_email@meinedomain.de>
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: extract_addr: input: <meine_email@meinedomain.de>
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: smtpd_check_addr: addr=meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: ctable_locate: leave existing entry key meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: extract_addr: result: meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr request = rewrite
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr rule = canonicalize
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr address = postmaster
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: address
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: address
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: postmaster@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: (end)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: rewrite_clnt: canonicalize: postmaster -> postmaster@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: >>> START Sender address RESTRICTIONS <<<
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: generic_checks: name=hash:/etc/postfix/access
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: check_mail_access: meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: ctable_locate: leave existing entry key meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: check_access: meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: check_domain_access: meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: check_access: meine_email@
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: generic_checks: name=check_sender_access status=0
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: >>> END Sender address RESTRICTIONS <<<
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: >>> START Recipient address RESTRICTIONS <<<
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: generic_checks: name=permit_mynetworks
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: permit_mynetworks: unknown 172.16.201.216
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_hostname: unknown ~? 172.16.0.0/16
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: match_hostaddr: 172.16.201.216 ~? 172.16.0.0/16
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: generic_checks: name=permit_mynetworks status=1
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: >>> CHECKING RECIPIENT MAPS <<<
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: ctable_locate: leave existing entry key meine_email@meinedomain.de
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: recipient_canonical_maps: meine_email@meinedomain.de: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: recipient_canonical_maps: meine_email: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: recipient_canonical_maps: @meinedomain.de: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: mail_addr_find: meine_email@meinedomain.de -> (not found)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: canonical_maps: meine_email@meinedomain.de: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: canonical_maps: meine_email: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: canonical_maps: @meinedomain.de: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: mail_addr_find: meine_email@meinedomain.de -> (not found)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: virtual_alias_maps: meine_email@meinedomain.de: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: virtual_alias_maps: meine_email: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: maps_find: virtual_alias_maps: @meinedomain.de: not found
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: mail_addr_find: meine_email@meinedomain.de -> (not found)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: connect to subsystem public/cleanup
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: public/cleanup socket: wanted attribute: queue_id
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: queue_id
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: 9E2FC33892
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: public/cleanup socket: wanted attribute: (list terminator)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: (end)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: send attr flags = 50
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: 9E2FC33892: client=unknown[172.16.201.216]
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: > unknown[172.16.201.216]: 250 Ok
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_pat: 0x80a9188
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: < unknown[172.16.201.216]: DATA
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: > unknown[172.16.201.216]: 354 End data with <CR><LF>.<CR><LF>
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: public/cleanup socket: wanted attribute: status
Dec 14 10:58:06 mail-server postfix/cleanup[4408]: 9E2FC33892: message-id=<000001c60094$496ce170$d8c910ac@paltz>
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: status
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: 0
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: public/cleanup socket: wanted attribute: reason
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: reason
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute value: (end)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: public/cleanup socket: wanted attribute: (list terminator)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: input attribute name: (end)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: > unknown[172.16.201.216]: 250 Ok: queued as 9E2FC33892
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_pat: 0x80a9188
Dec 14 10:58:06 mail-server postfix/qmgr[4334]: 9E2FC33892: from=<meine_email@meinedomain.de>, size=639, nrcpt=1 (queue active)
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: < unknown[172.16.201.216]: QUIT
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: > unknown[172.16.201.216]: 221 Bye
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: disconnect from unknown[172.16.201.216]
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: master_notify: status 1
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: connection closed
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_stop: 0x80a9188
Dec 14 10:58:06 mail-server postfix/smtpd[4405]: watchdog_start: 0x80a9188
Dec 14 10:58:08 mail-server postfix/smtp[4409]: 9E2FC33892: to=<meine_email@meinedomain.de>, relay=none, delay=2, status=bounced ([meinedomain.de]: Name or service not known)
Dec 14 10:58:08 mail-server postfix/cleanup[4408]: 9569F33897: message-id=<20051214095808.9569F33897@mail-server.meinedomain.de>
Dec 14 10:58:08 mail-server postfix/qmgr[4334]: 9569F33897: from=<>, size=2329, nrcpt=1 (queue active)
Dec 14 10:58:08 mail-server postfix/qmgr[4334]: 9E2FC33892: removed
Dec 14 10:58:10 mail-server postfix/smtp[4409]: 9569F33897: to=<meine_email@meinedomain.de>, relay=none, delay=2, status=bounced ([meinedomain.de]: Name or service not known)
Dec 14 10:58:10 mail-server postfix/qmgr[4334]: 9569F33897: removed
Dec 14 10:59:46 mail-server postfix/smtpd[4405]: proxymap stream disconnect
Dec 14 10:59:46 mail-server postfix/smtpd[4405]: rewrite stream disconnect
Dec 14 10:59:46 mail-server postfix/smtpd[4405]: idle timeout -- exiting

Terran Marine
14.12.05, 11:30
Hi,

nurmal zum postfix :

Die Mail wird nicht angenommen, weil der Empfänger nicht bekannt ist.

Kannst du mal die realen Absender und Empfänger eintragen, ist sonst so schwierig die Übersicht zu behalten.

Grüße
Terran

triptrop
14.12.05, 12:03
Hallo Terran...das ging ja schnell...prima :)

Hier die Logs mit:

Absender:. rplan@meine-domain.de
Empfänger:. dcrplan@meine-domain.de



Dec 14 11:56:32 mail-server postfix/postfix-script: starting the Postfix mail system
Dec 14 11:56:32 mail-server postfix/master[4733]: daemon started -- version 2.1.5
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: mynetworks ~? debug_peer_list
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: mynetworks ~? fast_flush_domains
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: mynetworks ~? mynetworks
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: relay_domains ~? debug_peer_list
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: relay_domains ~? fast_flush_domains
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: relay_domains ~? mynetworks
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: relay_domains ~? permit_mx_backup_networks
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: relay_domains ~? qmqpd_authorized_clients
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: relay_domains ~? relay_domains
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: permit_mx_backup_networks ~? debug_peer_list
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: permit_mx_backup_networks ~? fast_flush_domains
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: permit_mx_backup_networks ~? mynetworks
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: permit_mx_backup_networks ~? permit_mx_backup_networks
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: connect to subsystem private/proxymap
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: send attr request = open
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: send attr table = unix:passwd.byname
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: send attr flags = 64
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: private/proxymap socket: wanted attribute: status
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: input attribute name: status
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: input attribute value: 0
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: private/proxymap socket: wanted attribute: flags
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: input attribute name: flags
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: input attribute value: 80
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: private/proxymap socket: wanted attribute: (list terminator)
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: dict_proxy_open: connect to map=unix:passwd.byname status=0 server_flags=0120
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: dict_open: proxy:unix:passwd.byname
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: dict_open: hash:/etc/aliases
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: dict_open: hash:/etc/postfix/canonical
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: dict_open: hash:/etc/postfix/virtual
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: smtpd_access_maps ~? debug_peer_list
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: smtpd_access_maps ~? fast_flush_domains
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: smtpd_access_maps ~? mynetworks
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: smtpd_access_maps ~? permit_mx_backup_networks
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: smtpd_access_maps ~? qmqpd_authorized_clients
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: smtpd_access_maps ~? relay_domains
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: smtpd_access_maps ~? smtpd_access_maps
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: dict_open: hash:/etc/postfix/access
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: fast_flush_domains ~? debug_peer_list
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_string: fast_flush_domains ~? fast_flush_domains
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: watchdog_create: 0x80a9188 18000
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: watchdog_stop: 0x80a9188
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: watchdog_start: 0x80a9188
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: connection established
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: master_notify: status 0
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: name_mask: resource
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: name_mask: software
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: connect from unknown[172.16.201.216]
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_list_match: unknown: no match
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_list_match: 172.16.201.216: no match
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_list_match: unknown: no match
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: match_list_match: 172.16.201.216: no match
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: > unknown[172.16.201.216]: 220 mail-server.meine_domain.de ESMTP Postfix
Dec 14 11:58:09 mail-server postfix/smtpd[4756]: watchdog_pat: 0x80a9188
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: < unknown[172.16.201.216]: HELO paltz
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: > unknown[172.16.201.216]: 250 mail-server.meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: watchdog_pat: 0x80a9188
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: < unknown[172.16.201.216]: MAIL FROM: <rplan@meine_domain.de>
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: extract_addr: input: <rplan@meine_domain.de>
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: smtpd_check_addr: addr=rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: connect to subsystem private/rewrite
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr request = rewrite
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr rule = canonicalize
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr address = rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: address
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: address
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: rewrite_clnt: canonicalize: rplan@meine_domain.de -> rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr request = resolve
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr address = rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: transport
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: transport
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: smtp
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: nexthop
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: nexthop
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: recipient
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: recipient
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: flags
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: flags
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: 4096
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: resolve_clnt: `rplan@meine_domain.de' -> transp=`smtp' host=`meine_domain.de' rcpt=`rplan@meine_domain.de' flags= class=default
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: ctable_locate: install entry key rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: extract_addr: result: rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: fsspace: .: block size 4096, blocks free 18145266
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: smtpd_check_size: blocks 4096 avail 18145266 min_free 0 msg_size_limit 16777216
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: > unknown[172.16.201.216]: 250 Ok
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: watchdog_pat: 0x80a9188
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: < unknown[172.16.201.216]: RCPT TO: <dcrplan@meine_domain.de>
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: extract_addr: input: <dcrplan@meine_domain.de>
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: smtpd_check_addr: addr=dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr request = rewrite
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr rule = canonicalize
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr address = dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: address
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: address
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: rewrite_clnt: canonicalize: dcrplan@meine_domain.de -> dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr request = resolve
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr address = dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: transport
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: transport
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: smtp
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: nexthop
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: nexthop
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: recipient
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: recipient
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: flags
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: flags
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: 4096
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: resolve_clnt: `dcrplan@meine_domain.de' -> transp=`smtp' host=`meine_domain.de' rcpt=`dcrplan@meine_domain.de' flags= class=default
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: ctable_locate: install entry key dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: extract_addr: result: dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr request = rewrite
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr rule = canonicalize
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr address = postmaster
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: address
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: address
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: postmaster@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: private/rewrite socket: wanted attribute: (list terminator)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: rewrite_clnt: canonicalize: postmaster -> postmaster@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: >>> START Sender address RESTRICTIONS <<<
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: generic_checks: name=hash:/etc/postfix/access
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: check_mail_access: rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: ctable_locate: move existing entry key rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: check_access: rplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: check_domain_access: meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: check_access: rplan@
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: generic_checks: name=check_sender_access status=0
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: >>> END Sender address RESTRICTIONS <<<
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: >>> START Recipient address RESTRICTIONS <<<
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: generic_checks: name=permit_mynetworks
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: permit_mynetworks: unknown 172.16.201.216
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: match_hostname: unknown ~? 172.16.0.0/16
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: match_hostaddr: 172.16.201.216 ~? 172.16.0.0/16
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: generic_checks: name=permit_mynetworks status=1
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: >>> CHECKING RECIPIENT MAPS <<<
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: ctable_locate: move existing entry key dcrplan@meine_domain.de
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: recipient_canonical_maps: dcrplan@meine_domain.de: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: recipient_canonical_maps: dcrplan: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: recipient_canonical_maps: @meine_domain.de: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: mail_addr_find: dcrplan@meine_domain.de -> (not found)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: canonical_maps: dcrplan@meine_domain.de: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: canonical_maps: dcrplan: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: canonical_maps: @meine_domain.de: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: mail_addr_find: dcrplan@meine_domain.de -> (not found)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: virtual_alias_maps: dcrplan@meine_domain.de: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: virtual_alias_maps: dcrplan: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: maps_find: virtual_alias_maps: @meine_domain.de: not found
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: mail_addr_find: dcrplan@meine_domain.de -> (not found)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: connect to subsystem public/cleanup
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: public/cleanup socket: wanted attribute: queue_id
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: queue_id
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: 0D2F23384D
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: public/cleanup socket: wanted attribute: (list terminator)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: send attr flags = 50
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: 0D2F23384D: client=unknown[172.16.201.216]
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: > unknown[172.16.201.216]: 250 Ok
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: watchdog_pat: 0x80a9188
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: < unknown[172.16.201.216]: DATA
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: > unknown[172.16.201.216]: 354 End data with <CR><LF>.<CR><LF>
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: public/cleanup socket: wanted attribute: status
Dec 14 11:58:10 mail-server postfix/cleanup[4759]: 0D2F23384D: message-id=<IEEEIFBOIGAKPPKGPJKNGEAGCAAA.rplan@meine_domain.de>
Dec 14 11:58:10 mail-server postfix/qmgr[4744]: 0D2F23384D: from=<rplan@meine_domain.de>, size=661, nrcpt=1 (queue active)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: status
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: 0
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: public/cleanup socket: wanted attribute: reason
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: reason
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute value: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: public/cleanup socket: wanted attribute: (list terminator)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: input attribute name: (end)
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: > unknown[172.16.201.216]: 250 Ok: queued as 0D2F23384D
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: watchdog_pat: 0x80a9188
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: < unknown[172.16.201.216]: QUIT
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: > unknown[172.16.201.216]: 221 Bye
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: disconnect from unknown[172.16.201.216]
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: master_notify: status 1
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: connection closed
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: watchdog_stop: 0x80a9188
Dec 14 11:58:10 mail-server postfix/smtpd[4756]: watchdog_start: 0x80a9188
Dec 14 11:58:11 mail-server postfix/smtp[4760]: 0D2F23384D: to=<dcrplan@meine_domain.de>, relay=none, delay=1, status=bounced ([meine_domain.de]: Name or service not known)
Dec 14 11:58:11 mail-server postfix/cleanup[4759]: 371B533858: message-id=<20051214105811.371B533858@mail-server.meine_domain.de>
Dec 14 11:58:11 mail-server postfix/qmgr[4744]: 371B533858: from=<>, size=2355, nrcpt=1 (queue active)
Dec 14 11:58:11 mail-server postfix/qmgr[4744]: 0D2F23384D: removed
Dec 14 11:58:11 mail-server postfix/smtp[4760]: 371B533858: to=<rplan@meine_domain.de>, relay=none, delay=0, status=bounced ([meine_domain.de]: Name or service not known)
Dec 14 11:58:11 mail-server postfix/qmgr[4744]: 371B533858: removed




Dec 14 11:55:41 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 11:56:22 mail-server master[4674]: setrlimit: Unable to set file descriptors limit to -1: Operation not permitted
Dec 14 11:56:22 mail-server master[4674]: retrying with 1024 (current max)
Dec 14 11:56:22 mail-server master[4674]: process started
Dec 14 11:56:22 mail-server master[4675]: about to exec /usr/lib/cyrus/bin/ctl_cyrusdb
Dec 14 11:56:22 mail-server ctl_cyrusdb[4675]: recovering cyrus databases
Dec 14 11:56:22 mail-server ctl_cyrusdb[4675]: skiplist: recovered /var/lib/imap/mailboxes.db (2 records, 424 bytes) in 0 seconds
Dec 14 11:56:22 mail-server ctl_cyrusdb[4675]: skiplist: recovered /var/lib/imap/annotations.db (0 records, 144 bytes) in 0 seconds
Dec 14 11:56:22 mail-server ctl_cyrusdb[4675]: done recovering cyrus databases
Dec 14 11:56:22 mail-server master[4676]: about to exec /usr/lib/cyrus/bin/idled
Dec 14 11:56:22 mail-server master[4674]: SLPRegister [service:imap://mail-server.:143]
Dec 14 11:56:22 mail-server master[4674]: Error registering service with slp -20
Dec 14 11:56:22 mail-server master[4674]: SLPRegister [service:pop3://mail-server.:110]
Dec 14 11:56:22 mail-server master[4674]: Error registering service with slp -20
Dec 14 11:56:22 mail-server master[4674]: SLPRegister [service:sieve://mail-server.:2000]
Dec 14 11:56:22 mail-server master[4674]: Error registering service with slp -20
Dec 14 11:56:22 mail-server master[4674]: ready for work
Dec 14 11:56:22 mail-server master[4678]: about to exec /usr/lib/cyrus/bin/ctl_cyrusdb
Dec 14 11:56:22 mail-server ctl_cyrusdb[4678]: checkpointing cyrus databases
Dec 14 11:56:22 mail-server ctl_cyrusdb[4678]: archiving database file: /var/lib/imap/annotations.db
Dec 14 11:56:22 mail-server ctl_cyrusdb[4678]: archiving log file: /var/lib/imap/db/log.0000000001
Dec 14 11:56:22 mail-server ctl_cyrusdb[4678]: archiving database file: /var/lib/imap/mailboxes.db
Dec 14 11:56:22 mail-server ctl_cyrusdb[4678]: archiving log file: /var/lib/imap/db/log.0000000001
Dec 14 11:56:22 mail-server ctl_cyrusdb[4678]: done checkpointing cyrus databases
Dec 14 11:56:22 mail-server master[4674]: process 4678 exited, status 0
Dec 14 11:56:51 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 11:56:58 mail-server master[4753]: about to exec /usr/lib/cyrus/bin/imapd
Dec 14 11:56:58 mail-server imap[4753]: executed
Dec 14 11:56:58 mail-server imap[4753]: accepted connection
Dec 14 11:56:58 mail-server imap[4753]: login: [172.16.201.216] rplan plaintext User logged in
Dec 14 11:57:02 mail-server imap[4753]: skiplist: recovered /var/lib/imap/user/r/rplan.seen (0 records, 144 bytes) in 0 seconds
Dec 14 11:57:02 mail-server imap[4753]: seen_db: user rplan opened /var/lib/imap/user/r/rplan.seen
Dec 14 11:57:02 mail-server imap[4753]: open: user rplan opened INBOX
Dec 14 11:57:03 mail-server master[4754]: about to exec /usr/lib/cyrus/bin/imapd
Dec 14 11:57:03 mail-server imap[4754]: executed
Dec 14 11:57:03 mail-server imap[4754]: accepted connection
Dec 14 11:57:03 mail-server imap[4754]: login: [172.16.201.216] rplan plaintext User logged in
Dec 14 11:57:09 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 11:58:06 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received
Dec 14 11:58:54 mail-server master[4674]: process 4754 exited, status 0
Dec 14 11:59:01 mail-server /usr/sbin/cron[4765]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Dec 14 12:00:01 mail-server /usr/sbin/cron[4769]: (root) CMD ( /usr/sbin/awstats-update)
Dec 14 12:00:09 mail-server kernel: drivers/usb/input/hid-core.c: input irq status -84 received

Terran Marine
14.12.05, 15:33
Hi,

hab mich geirrt, denke ich. Kannst du nochmal die main.cf und master.cf posten, liegt afaik doch nicht am unbekannten User.

Grüße
Terran

triptrop
14.12.05, 16:12
Hallo Terran,

hier die main.cf und die master.cf



#
# -----------------------------------------------------------------------
# NOTE: Many parameters have already been added to the end of this file
# by SuSEconfig.postfix. So take care that you don't uncomment
# and set a parameter without checking whether it has been added
# to the end of this file.
# -----------------------------------------------------------------------
#
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
#
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
#myhostname = mail-server.meine_domain-it.de - meine_domain-Konfig. am Ende


# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain = domain.tld
mydomain = meine_domain-it.de

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
#myorigin = $mydomain
myorigin = $mydomain



# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# meine_domain-Konfig. am Ende der Datei

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain


# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# s that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# meine_domain-Konfig am Ende


# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination
relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# meine_domain-Konfig am Ende der Seite

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
# meine_domain-Konfig am Ende der Seite

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local

# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5

# If you don't have X installed on the Postfix machine, try:
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = maildrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = /usr/share/doc/packages/postfix/html

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/packages/postfix/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/packages/postfix/README_FILES
biff = no
mail_spool_directory = /var/mail
# mail_spool_directory = /var/spool/imap/user
canonical_maps = hash:/etc/postfix/canonical
virtual_maps = hash:/etc/postfix/virtual
relocated_maps = hash:/etc/postfix/relocated
transport_maps = hash:/etc/postfix/transport
sender_canonical_maps = hash:/etc/postfix/sender_canonical
masquerade_exceptions = root
masquerade_classes = envelope_sender, header_sender, header_recipient
myhostname = mail-server.meine_domain-it.de
program_directory = /usr/lib/postfix
# inet_interfaces = 127.0.0.1 ::1
inet_interfaces = all
masquerade_domains =
mydestination = $myhostname, localhost.$mydomain
mynetworks = 172.16.0.0/16, 127.0.0.0/8, 130.10.0.0/16
defer_transports =
# disable_dns_lookups = no
disable_dns_lookups = yes
relayhost =
mailbox_command =
#mailbox_transport = cyrus
mailbox_transport = lmtp:unix:var/spool/postfix/public/lmtp
# Alternativ:. mailbox_transport = lmtp:unix:var/lib/imap/socket/lmtp
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_client_restrictions =
smtpd_helo_required = no
smtpd_helo_restrictions =
strict_rfc821_envelopes = no
smtpd_recipient_restrictions = permit_mynetworks,check_relay_domains,reject_unaut h_destination
# ============================
# SASL Konfiguration
#Wieder ein Workaround für ältere Clients und Outlook
broken_sasl_auth_clients = yes
smtp_sasl_auth_enable = no
smtpd_sasl_auth_enable = no
smtpd_use_tls = no
smtp_use_tls = no
# smtpd_sasl_local_domain = $myhostname
# smtpd_sasl_security_options = noanonymous
# smtpd_sasl_exceptions_networks = 172.16.0.0/16
# smtpd_client_restrictions = permit_sasl_authenticated
# Ende der SASL Konfiguration
# ===========================
# alias_maps = hash:/etc/aliases
alias_maps = hash:/etc/aliases
# mailbox_size_limit = 2147483648
mailbox_size_limit = 2147483648
# message_size_limit = 10240000
message_size_limit = 16777216





#
# Postfix master process configuration file. Each logical line
# describes how a Postfix daemon program should be run.
#
# A logical line starts with non-whitespace, non-comment text.
# Empty lines and whitespace-only lines are ignored, as are comment
# lines whose first non-whitespace character is a `#'.
# A line that starts with whitespace continues a logical line.
#
# The fields that make up each line are described below. A "-" field
# value requests that a default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field). With INET transports, a service is specified as
# host:port. The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server: localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service. Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file). Only the
# pipe, virtual and local delivery daemons require privileges.
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The proxymap server can run chrooted, but doing so defeats most of
# the purpose of having that service in the first place.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used. Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the daemon_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# General main.cf options can be overridden for specific services.
# To override one or more main.cf options, specify them as arguments
# below, preceding each option by "-o". There must be no whitespace
# in the option itself (separate multiple values for an option by
# commas).
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ================================================== ========================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ================================================== ========================
smtp inet n - n - - smtpd -v
#smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - n - - smtpd
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes -o smtpd_etrn_restrictions=reject
#628 inet n - n - - qmqpd
pickup fifo n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
#tlsmgr fifo - - n 300 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - n - - smtp
relay unix - - n - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - n - - showq
error unix - - n - - error
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
#localhost:10025 inet n - n - - smtpd -o content_filter=
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
cyrus unix - n n - - pipe
user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
procmail unix - n n - - pipe
flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}

Terran Marine
14.12.05, 16:58
Dec 14 11:58:11 mail-server postfix/smtp[4760]: 0D2F23384D: to=<dcrplan@meine_domain.de>, relay=none, delay=1, status=bounced ([meine_domain.de]: Name or service not known)


Das dürfte die maßgebliche Zeile sein.

Hast du vielleicht in irgendeiner map-Datei (transport oder so), die Domain bzw. eine Zuweisung der gleichen definiert ?

Normalerweise sollte er die Mail ja per lmtp an cyrus weiterliefern, aber das tut er definitiv nicht.

triptrop
14.12.05, 17:07
Ich habe die Transport -Datei nicht angerührt.

Ich poste nochmal die restlichen Logs.
Vielleicht fällt dir ja noch etwas ein....ich muss das Ding zum laufen bekommen :eek:

imapd.conf



configdirectory: /var/lib/imap
partition-default: /var/spool/imap
sievedir: /var/lib/sieve
admins: cyrus root postfix
allowanonymouslogin: no
autocreatequota: 10000
reject8bit: no
quotawarn: 90
timeout: 30
poptimeout: 10
dracinterval: 0
drachost: localhost
sasl_pwcheck_method: auxprop
lmtp_overquota_perm_failure: no
lmtpsocket: /var/spool/postfix/public/lmtp
#
# if you want TLS, you have to generate certificates and keys
#
#tls_cert_file: /usr/ssl/certs/cert.pem
#tls_key_file: /usr/ssl/certs/skey.pem
#tls_ca_file: /usr/ssl/CA/CAcert.pem
#tls_ca_path: /usr/ssl/CA




cyrus.conf



# standard standalone server implementation

START {
# do not delete this entry!
recover cmd="ctl_cyrusdb -r"

# this is only necessary if using idled for IMAP IDLE
idled cmd="idled"
}

# UNIX sockets start with a slash and are put into /var/lib/imap/socket
SERVICES {
# add or remove based on preferences
imap cmd="imapd" listen="imap" prefork=0
# imaps cmd="imapd -s" listen="imaps" prefork=0
pop3 cmd="pop3d" listen="pop3" prefork=0
# pop3s cmd="pop3d -s" listen="pop3s" prefork=0
sieve cmd="timsieved" listen="sieve" prefork=0

# at least one LMTP is required for delivery
# lmtp cmd="lmtpd" listen="lmtp" prefork=0
lmtpunix cmd="lmtpd" listen="/var/spool/postfix/public/lmtp" prefork=1
# Alternativ:.lmtpunix cmd="lmtpd" listen="/var/lib/imap/socket/lmtp" prefork=0

# this is only necessary if using notifications
# notify cmd="notifyd" listen="/var/lib/imap/socket/notify" proto="udp" prefork=1
}

EVENTS {
# this is required
checkpoint cmd="ctl_cyrusdb -c" period=30

# this is only necessary if using duplicate delivery suppression
delprune cmd="cyr_expire -E 3" at=0400

# this is only necessary if caching TLS sessions
tlsprune cmd="tls_prune" at=0400

# Uncomment the next entry, if you want to automatically remove
# old messages of EVERY user.
# This example calls ipurge every 60 minutes and ipurge will delete
# ALL messages older then 30 days.
# enter 'man 8 ipurge' for more details

# cleanup cmd="ipurge -d 30 -f" period=60
}

Terran Marine
15.12.05, 01:10
An cyrus liegt es nicht, postfix gibt die Mails NICHT an cyrus weiter.

Klappt denn die Namensauflösung auf dem Mailserver, besonders die Auflösung des (eigenen) Domainsnamens an den die Mail gesendet wird.

Trag auch nochmal die Empfängerdomain in mydestination ein.

Grüße
Terran

triptrop
15.12.05, 08:09
Hallo Terran,

ich in der main.cf jetzt den folgenden Eintrag:



mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain


Wenn ich auf dem Mail-Server einen:

ping mail-server

mache, wird dieser erreicht und auch die IP mit angegeben.

Auf dem Windows-Client habe ich in der Hosts-Datei den Server eingetragen und wenn ich einen Ping auf diesen mache, wird er ebenfalls aufgelöst.
Wenn ich unter Outlook die Mail versende, meldet sich Outlook auch bei Postfix an und versendet.
Ich habe schonmal an den lmtp-Socket gedacht, aber nachdem ich soviele Internetseiten durchgestöbert habe, ist mir nichts aufgefallen :(

Was kann ich noch tun ????

Fly
15.12.05, 08:59
Versuch mal ein myhostname Eintrag in der main.cf. Gib aber genau den Namen ein, was hostname --fqdn sagt. Domainname stimmt mit mydomain überein?

triptrop
15.12.05, 10:07
Die Einträge von myhostname und mydomain habe ich überprüft. Diese stimmen.

Ich habe jetzt mal eine E-Mail direkt auf dem Server versendet um eine evtl Fehlerquelle von Outlook her auszuschließen:

Nach dem versenden steht folgendes in der Logdatei.

echo foo | usr/sbin/sendmail -f root root



Dec 15 09:48:38 mail-server postfix/pickup[8961]: 2FB863389C: uid=0 from=<root>
Dec 15 09:48:38 mail-server postfix/cleanup[9000]: 2FB863389C: message-id=<20051215084838.2FB863389C@mail-server.fft-it.de>
Dec 15 09:48:38 mail-server postfix/qmgr[8962]: 2FB863389C: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 09:48:38 mail-server postfix/lmtp[9004]: 2FB863389C: to=<testuser@fft-it.de>, orig_to=<root>, relay=none, delay=0, status=deferred (connect to var/spool/postfix/public/lmtp[var/spool/postfix/public/lmtp]: No such file or directory)
Dec 15 09:48:51 mail-server postfix/pickup[8961]: 56686338A6: uid=0 from=<root>
Dec 15 09:48:51 mail-server postfix/cleanup[9000]: 56686338A6: message-id=<20051215084851.56686338A6@mail-server.fft-it.de>
Dec 15 09:48:51 mail-server postfix/qmgr[8962]: 56686338A6: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 09:48:51 mail-server postfix/lmtp[9004]: 56686338A6: to=<testuser@fft-it.de>, orig_to=<root>, relay=none, delay=0, status=deferred (connect to var/spool/postfix/public/lmtp[var/spool/postfix/public/lmtp]: No such file or directory)
Dec 15 09:49:01 mail-server postfix/pickup[8961]: E650D338A9: uid=0 from=<root>
Dec 15 09:49:01 mail-server postfix/cleanup[9000]: E650D338A9: message-id=<20051215084901.E650D338A9@mail-server.fft-it.de>
Dec 15 09:49:01 mail-server postfix/qmgr[8962]: E650D338A9: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 09:49:01 mail-server postfix/lmtp[9004]: E650D338A9: to=<testuser@fft-it.de>, orig_to=<root>, relay=none, delay=0, status=deferred (connect to var/spool/postfix/public/lmtp[var/spool/postfix/public/lmtp]: No such file or directory)
Dec 15 09:49:16 mail-server postfix/pickup[8961]: D4900338AD: uid=0 from=<root>
Dec 15 09:49:16 mail-server postfix/cleanup[9000]: D4900338AD: message-id=<20051215084916.D4900338AD@mail-server.fft-it.de>
Dec 15 09:49:16 mail-server postfix/qmgr[8962]: D4900338AD: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 09:49:16 mail-server postfix/lmtp[9004]: D4900338AD: to=<testuser@fft-it.de>, orig_to=<root>, relay=none, delay=0, status=deferred (connect to var/spool/postfix/public/lmtp[var/spool/postfix/public/lmtp]: No such file or directory)


In meiner "smtpd_sender_restrictions = hash:/etc/postfix/access" steht:.



# Konfig:
# ====

localhost RELAY

Der Rest ist auskommentiert

Terran Marine
15.12.05, 10:30
Das sieht schon besser aus,

postfix will weitergeben, aber die lmtp-Pipe von cyrus ist nicht da, bzw. eventuell unter anderen Dateinamen eingerichtet.

Grüße
Terran

triptrop
15.12.05, 10:36
Wie und wo kann ich das überprüfen ?:confused:

Terran Marine
15.12.05, 11:21
Prüfe ob die Datei existiert, und ob beide Dienste auf die richtige Datei verweisen.

postfix kann auch im chroot laufen, dann ist das unterhalb des chroot.

Grüße
Terran

knight14th
15.12.05, 11:42
Ich hatte ähnliche Probleme. Grund war das Problem mit der Reverse-Auflösung des Domainnamen lokal. Abhilfe war das Aufsetzen eines lokalen DNS mittels DNSMasq (hier einfach die lokalen Hosts in die /etc/hosts eintragen reicht schon). Dann ging alles problemlos.

triptrop
15.12.05, 11:49
Der Inhalt von "/var/spool/postfix/public" sieht so aus:



drwx--x--- 2 postfix maildrop 192 Dec 15 09:43 .
drwxr-xr-x 16 root root 384 Nov 30 11:57 ..
srw-rw-rw- 1 postfix postfix 0 Dec 15 09:43 cleanup
srw-rw-rw- 1 postfix postfix 0 Dec 15 09:43 flush
srwxrwxrwx 1 root root 0 Dec 14 15:00 lmtp
prw--w--w- 1 postfix postfix 0 Dec 15 11:40 pickup
prw--w--w- 1 postfix postfix 0 Dec 15 11:38 qmgr
srw-rw-rw- 1 postfix postfix 0 Dec 15 09:43 showq




Prüfe ob die Datei existiert, und ob beide Dienste auf die richtige Datei verweisen.

postfix kann auch im chroot laufen, dann ist das unterhalb des chroot.


Wie soll ich überprüfen ob die Dienste auf die richtige Datei verweisen ?

Postfix läuft bei mir nicht im chroot-Modus:;;



# ================================================== ========================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ================================================== ========================
smtp inet n - n - - smtpd -v
#smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - n - - smtpd
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes -o smtpd_etrn_restrictions=reject
#628 inet n - n - - qmqpd
pickup fifo n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
#tlsmgr fifo - - n 300 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - n - - smtp
relay unix - - n - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - n - - showq
error unix - - n - - error
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
#localhost:10025 inet n - n - - smtpd -o content_filter=
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
cyrus unix - n n - - pipe
user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
procmail unix - n n - - pipe
flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}

triptrop
15.12.05, 12:36
@ALL: Nachtrag siehe unten


@q22knight14th



127.0.0.1 localhost
172.16.2.2 mail-server.xxx-it.de mail-server


Wenn ich in der main.cf "mailbox_transport = cyrus" umstelle

siehe:



mailbox_transport = cyrus
#mailbox_transport = lmtp:unix:var/spool/postfix/public/lmtp
# Alternativ:. mailbox_transport = lmtp:unix:var/lib/imap/socket/lmtp


dann kommt das raus:


Dec 15 12:26:13 mail-server postfix/qmgr[10111]: 24F61338B9: from=<rplan@fft-it.de>, size=291, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/qmgr[10111]: 2FB863389C: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/qmgr[10111]: 481C5338BE: from=<rplan@fft-it.de>, size=291, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/qmgr[10111]: 537F933880: from=<rplan@fft-it.de>, size=666, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/qmgr[10111]: 56686338A6: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/qmgr[10111]: 61A38338B1: from=<rplan@fft-it.de>, size=291, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/qmgr[10111]: D4900338AD: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/qmgr[10111]: E650D338A9: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 12:26:13 mail-server postfix/pipe[10118]: 24F61338B9: to=<dcrplan@fft-it.de>, orig_to=<dcrplan>, relay=cyrus, delay=459, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
Dec 15 12:26:13 mail-server postfix/pipe[10126]: 481C5338BE: to=<dcrplan@fft-it.de>, orig_to=<dcrplan>, relay=cyrus, delay=298, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
Dec 15 12:26:13 mail-server postfix/pipe[10122]: 2FB863389C: to=<testuser@fft-it.de>, orig_to=<root>, relay=cyrus, delay=9455, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
Dec 15 12:26:13 mail-server postfix/pipe[10130]: 537F933880: to=<rplan@fft-it.de>, relay=cyrus, delay=15967, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
Dec 15 12:26:13 mail-server postfix/pipe[10132]: 56686338A6: to=<testuser@fft-it.de>, orig_to=<root>, relay=cyrus, delay=9442, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
Dec 15 12:26:13 mail-server postfix/pipe[10126]: D4900338AD: to=<testuser@fft-it.de>, orig_to=<root>, relay=cyrus, delay=9417, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
Dec 15 12:26:13 mail-server postfix/pipe[10118]: 61A38338B1: to=<dcrplan@fft-it.de>, orig_to=<dcrplan>, relay=cyrus, delay=8189, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
Dec 15 12:26:13 mail-server postfix/pipe[10122]: E650D338A9: to=<testuser@fft-it.de>, orig_to=<root>, relay=cyrus, delay=9432, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Bad file descriptor_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )

soenke
15.12.05, 13:54
Moin,

als sendmail Benutzer habe ich zwar wenig bis gar keine Ahnung von Postfix, aber nach Betrachtung dieser Zeile:



Dec 15 09:49:16 mail-server postfix/lmtp[9004]: D4900338AD: to=<testuser@fft-it.de>, orig_to=<root>, relay=none, delay=0, status=deferred (connect to var/spool/postfix/public/lmtp[var/spool/postfix/public/lmtp]: No such file or directory)


kam ich auf den Gedanken, dass evtl. bei der Konfiguration ein '/' davor fehlt.

Also:



mailbox_transport = lmtp:unix:/var/spool/postfix/public/lmtp


Viele Grüße
Sönke

triptrop
15.12.05, 14:25
Ich habe den "'/" davor gemacht und erhalte nun beim Versenden diese Meldung:




Dec 15 14:20:51 mail-server postfix/pickup[10953]: 5350B338B8: uid=0 from=<root>
Dec 15 14:20:51 mail-server postfix/cleanup[10996]: 5350B338B8: message-id=<20051215132051.5350B338B8@mail-server.fft-it.de>
Dec 15 14:20:51 mail-server postfix/qmgr[10954]: 5350B338B8: from=<root@fft-it.de>, size=290, nrcpt=1 (queue active)
Dec 15 14:20:51 mail-server postfix/lmtp[10999]: 5350B338B8: to=<testuser@fft-it.de>, orig_to=<root>, relay=/var/spool/postfix/public/lmtp[/var/spool/postfix/public/lmtp], delay=0, status=bounced (host /var/spool/postfix/public/lmtp[/var/spool/postfix/public/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))
Dec 15 14:20:51 mail-server postfix/cleanup[10996]: 5DF0D338B9: message-id=<20051215132051.5DF0D338B9@mail-server.fft-it.de>
Dec 15 14:20:51 mail-server postfix/qmgr[10954]: 5DF0D338B9: from=<>, size=2503, nrcpt=1 (queue active)
Dec 15 14:20:51 mail-server postfix/qmgr[10954]: 5350B338B8: removed
Dec 15 14:20:51 mail-server postfix/lmtp[10999]: 5DF0D338B9: to=<testuser@fft-it.de>, orig_to=<root@fft-it.de>, relay=/var/spool/postfix/public/lmtp[/var/spool/postfix/public/lmtp], delay=0, status=bounced (host /var/spool/postfix/public/lmtp[/var/spool/postfix/public/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))
Dec 15 14:20:51 mail-server postfix/qmgr[10954]: 5DF0D338B9: removed

Terran Marine
15.12.05, 16:38
Stück für Stück näherst du dich dem Problem.

postfix kann wohl jetzt auf den lmtp zugreifen, cyrus nimmt aber nicht an, ist der User angelegt ?

Hast du dich denn im Vorfeld mit dem Thema beschäftigt, klingt doch alles stark nach try&error und da du ja meinst, der Server MUß laufen, ist vielleicht ein Buch dazu nicht verkehrt (oder prof. Hilfe)

Grüße
Terran

triptrop
15.12.05, 17:17
Ich habe die main.cf folgender Maßen geändert:



mailbox_command = /usr/lib/cyrus/bin/deliver -m $MAILBOX -a $USER $USER
local_transport = lmtp


Jetzt erhalte ich diese Meldung:


Dec 15 17:08:58 mail-server postfix/pickup[12370]: 34C4C338B9: uid=0 from=<rplan>
Dec 15 17:08:58 mail-server postfix/cleanup[12408]: 34C4C338B9: message-id=<20051215160858.34C4C338B9@mail-server.meine_domain-it.de>
Dec 15 17:08:58 mail-server postfix/qmgr[12371]: 34C4C338B9: from=<rplan@meine_domain-it.de>, size=291, nrcpt=1 (queue active)
Dec 15 17:08:58 mail-server postfix/lmtp[12410]: 34C4C338B9: to=<dcrplan@meine_domain-it.de>, orig_to=<dcrplan>, relay=none, delay=0, status=bounced (meine_domain-it.de: host not found)
Dec 15 17:08:58 mail-server postfix/cleanup[12408]: 4F602338BD: message-id=<20051215160858.4F602338BD@mail-server.meine_domain-it.de>
Dec 15 17:08:58 mail-server postfix/qmgr[12371]: 4F602338BD: from=<>, size=2022, nrcpt=1 (queue active)
Dec 15 17:08:58 mail-server postfix/qmgr[12371]: 34C4C338B9: removed
Dec 15 17:08:58 mail-server postfix/lmtp[12410]: 4F602338BD: to=<rplan@meine_domain-it.de>, relay=none, delay=0, status=bounced (meine_domain-it.de: host not found)
Dec 15 17:08:58 mail-server postfix/qmgr[12371]: 4F602338BD: removed



Ich habe die User cyradm angelegt !


Ich habe vor zwei Wochen mit dem Projekt angefangen und jede Menge HowTos gelesen...leider gibt unter den Distributionen unterschiede und selbst man nur die HowTos von einer Distribution liest, gibt es in der Versionen unterschiede.

Ich muss dazu sagen, mit Linux habe bisher (fast) nicht gearbeitet...ist also auch neu für mich.
Ein Buch habe ich mir auch gekauft:
"Postfix - Ralf Hildebrandt vom dpunkt Verlag"

Das Problem ist, dass ich den Server in 2 Wochen laufen muss...wenn es für mich wär, dann würde ich mir auch die Zeit nehmen, das ganze Buch von A-Z zu lesen...leider muss ich den Server auf der Arbeit einrichten und hier interessiert es nicht, ob ich jemals einen E-Mail-Server eingerichtet habe oder von Linux noch wenig Kenntnisse vorhanden sind :( :mad:

Deshalb bin ich ja auch froh, dass ich hier so schnell Hilfe bekomme....und du kannst mir glauben...ich schwitze ;)
Also bitte weiterhelfen.... :)

Terran Marine
16.12.05, 10:53
Ich habe die main.cf folgender Maßen geändert:



mailbox_command = /usr/lib/cyrus/bin/deliver -m $MAILBOX -a $USER $USER
local_transport = lmtp



Die Übergabe an cyrus ist ja gelaufen, das war schon in Ordnung so.

Nur innerhalb von cyrus hat er den User nicht gekannt, kenne mich mit cyrus auch nicht so aus, setze privat eher auf courier, der ist imho dreimal leichter zu konfigurieren und setzt auf das einfache Maildir System.

Grüße
Terran

triptrop
19.12.05, 07:51
Es läuft :) :) :) :)

Es lag an der Authentifikation von SASL.
Ich habe zwar mit cyradm die Benutzer angelegt, aber nicht für SASL.

Vielen Dank für die Unterstützung und die Hilfe :)

tschloss
19.12.05, 08:24
Prima.
Noch ein Tipp: Unter SUSE protokolliert Postfix in einen separaten Mail-Log, den du auch hier gepostet hattest.
Cyrus dagegen protokolliert standardmäßig nach messages.
Dort war die Fehlermeldung der SASL Auth sicher dringestanden.

Ja ja ich weiß: Schlaubergerei im Nachhinein wird gern genommen. Aber fürs nächste mal.

Grüße
Thomas