Archiv verlassen und diese Seite im Standarddesign anzeigen : Läuft WPA schon mit Intel IPW2200???
Hi zusammen,
wollte mal fragen ob jemand ne Anleitung oder ein HowTo hat wie ich die
WPA Verschlüsselung unter Linux/Debian hinbekomme.
Da ich n neues Laptop hab und dort paralell Windows noch her läuft,
dieses aber andauernd bei WEP-Verschlüsselung meine Verbindung kappt,
würd ich gerne auf WPA umstellen.
Leider waren keine aussagekräftigen Threats für mich zu finden.
Wäre nett wenn Ihr mir n paar Tips geben könntet.
Ansonsten rennt die IPW2200 ganz gut :)
Gruß
Chris
Ja, läuft. Das Zauberwort ist "wpa_supplicant". Such mal bei Google nach
wpa_supplicant AND ipw2200
Jan
so jetzt hab ich ein Problem mit der Ausgabe von wpa_supplicant:
schleppi:/home/chris# wpa_supplicant -i eth1 -c /etc/wpa_supplicant.conf -D ipw -w -dd
Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'ipw' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=2
Line: 15 - start of a new network block
ssid - hexdump_ascii(len=14):
54 75 78 48 6f 6d 65 4e 65 74 77 6f 72 6b TuxHomeNetwork
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x2
pairwise: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=13): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 22: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Priority group 0
id=0 ssid='TuxHomeNetwork'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_init is called
SIOCGIWRANGE: WE(compiled)=19 WE(source)=16 enc_capa=0x0
capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:13:ce:6d:40:89
wpa_driver_ipw_set_wpa: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_countermeasures: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_drop_unencrypted: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'TuxHomeNetwork'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_ipw_set_auth_alg: auth_alg=0x1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
WPA: Failed to parse WPA IE from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 14 pairwise 8 key_mgmt 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_ipw_set_drop_unencrypted: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
State: SCANNING -> ASSOCIATING
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b1a len=23
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_set_wpa: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_drop_unencrypted: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_countermeasures: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
No keys have been configured - skip key clearing
Cancelling scan request
schleppi:/home/chris#
meine config lautet:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=2
fast_reauth=1
### Associate with any open access point
### Scans/ESSID changes can be done with wpa_cli
network={
ssid="WlanHome"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
psk="1234567890000"
hab keine Ahnung was ich damit anfangen soll...
Welche Version des ipw2200-Treibers hast Du denn? Versuch es mal mit der letzten Version (1.0.8 glaub ich). Du benötigst dann aber auch ne neue Firmware.
hab ich beide ganz neu installiert... liefen auch mit WEP
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.