Läuft WPA schon mit Intel IPW2200???

[dhchris]

Hi zusammen,

wollte mal fragen ob jemand ne Anleitung oder ein HowTo hat wie ich die
WPA Verschlüsselung unter Linux/Debian hinbekomme.

Da ich n neues Laptop hab und dort paralell Windows noch her läuft,
dieses aber andauernd bei WEP-Verschlüsselung meine Verbindung kappt,
würd ich gerne auf WPA umstellen.

Leider waren keine aussagekräftigen Threats für mich zu finden.

Wäre nett wenn Ihr mir n paar Tips geben könntet.

Ansonsten rennt die IPW2200 ganz gut :)

Gruß
Chris

[munkmill]

Ja, läuft. Das Zauberwort ist "wpa_supplicant". Such mal bei Google nach

wpa_supplicant AND ipw2200

Jan

[dhchris]

so jetzt hab ich ein Problem mit der Ausgabe von wpa_supplicant:

schleppi:/home/chris# wpa_supplicant -i eth1 -c /etc/wpa_supplicant.conf -D ipw -w -dd
Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'ipw' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=2
Line: 15 - start of a new network block
ssid - hexdump_ascii(len=14):
54 75 78 48 6f 6d 65 4e 65 74 77 6f 72 6b TuxHomeNetwork
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x2
pairwise: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=13): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 22: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Priority group 0
id=0 ssid='TuxHomeNetwork'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_init is called
SIOCGIWRANGE: WE(compiled)=19 WE(source)=16 enc_capa=0x0
capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:13:ce:6d:40:89
wpa_driver_ipw_set_wpa: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_countermeasures: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_drop_unencrypted: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'TuxHomeNetwork'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_ipw_set_auth_alg: auth_alg=0x1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
WPA: Failed to parse WPA IE from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 14 pairwise 8 key_mgmt 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_ipw_set_drop_unencrypted: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
State: SCANNING -> ASSOCIATING
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b1a len=23
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_set_wpa: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_drop_unencrypted: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_countermeasures: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
No keys have been configured - skip key clearing
Cancelling scan request
schleppi:/home/chris#

meine config lautet:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0

eapol_version=1
ap_scan=2
fast_reauth=1

### Associate with any open access point
### Scans/ESSID changes can be done with wpa_cli
network={
ssid="WlanHome"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
psk="1234567890000"


hab keine Ahnung was ich damit anfangen soll...

[munkmill]

Welche Version des ipw2200-Treibers hast Du denn? Versuch es mal mit der letzten Version (1.0.8 glaub ich). Du benötigst dann aber auch ne neue Firmware.

[dhchris]

hab ich beide ganz neu installiert... liefen auch mit WEP