PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Digitale Tonausgabe funktioniert nicht



Zierroff
29.09.05, 19:36
Hallo erst mal vieleicht könnt ihr mir helfen

Erstmal
ich benutze kanotix(debian artig)
habe alsa als treiber und er sagt es is
Chip:Realtek ALC650E (onboard)

So nun zu meinem problem:
Zur Zeit ist meine soundkarte über den kopfhörer ausgang an meiner anlage angeshlossen damit kann ich aber kein Dts,Dolby,Ac3.
Also habe ich mir ein koax kabel geholt und angesteckt.

Ich nehme tv sendungen über eine digitale sat anlage mit kaffeine auf.
Man kann bei kaffeine einstellen, dass er Ac3 (dolby digital) aufnimmt.
Wenn ich aber mit kaffeine aber fernsehe oder dvd anschaue kommt kein ton über das koax kabel.Muss ich noch etwas bei alsa/kaffeine einstellen.
Ich will also bei Dvd/Dvb das digitale signal an meinen reciver übertragen.
Bei meiner windoof partition hab ich es einmal mit einer dvd ausprobiert und es hat funktioniert.
Trozdem mal diese ausgabe


zierroff@Rasselkiste:~$ lsmod
Module Size Used by
snd_seq_dummy 2692 0
snd_seq_oss 28160 0
snd_seq_midi 6688 0
snd_seq_midi_event 5760 2 snd_seq_oss,snd_seq_midi
snd_seq 43664 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
lp 9672 0
snd_intel8x0 28096 4
snd_ac97_codec 86396 1 snd_intel8x0
snd_ac97_bus 2048 1 snd_ac97_codec
snd_pcm_oss 46752 0
snd_mixer_oss 15488 1 snd_pcm_oss
snd_pcm 73864 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 19332 3 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_intel8x0,snd_pcm
snd_mpu401 5064 0
snd_mpu401_uart 5376 1 snd_mpu401
snd_rawmidi 18848 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 6796 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd _rawmidi
snd 43012 18 snd_seq_oss,snd_seq,snd_intel8x0,snd_ac97_codec,sn d_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu4 01,snd_mpu401_uart,snd_rawmidi,snd_seq_device
ns558 4484 0
gameport 10888 2 ns558
parport_pc 35396 1
parport 29256 2 lp,parport_pc
8250_pnp 8192 0
sis_agp 6020 1
b2c2_flexcop_pci 6040 0
b2c2_flexcop 22540 1 b2c2_flexcop_pci
joydev 7872 0
mt352 5764 1 b2c2_flexcop
bcm3510 9476 1 b2c2_flexcop
nxt2002 7812 1 b2c2_flexcop
dvb_ttusb_budget 28188 0
cx22700 4996 1 dvb_ttusb_budget
budget_av 12288 0
tda10021 5636 1 budget_av
budget 8704 0
s5h1420 7812 1 budget
dvb_ttpci 85436 0
l64781 6148 2 budget,dvb_ttpci
tda8083 5252 3 dvb_ttusb_budget,budget,dvb_ttpci
stv0297 6912 2 b2c2_flexcop,dvb_ttpci
sp8870 6412 1 dvb_ttpci
saa7146_vv 43392 2 budget_av,dvb_ttpci
mt312 7044 1 b2c2_flexcop
cx24110 6788 0
ves1820 5124 3 dvb_ttusb_budget,budget,dvb_ttpci
ves1x93 5892 2 budget,dvb_ttpci
autofs4 14468 1
cryptoloop 3072 0
aes_i586 38784 0
af_packet 16136 2
agpgart 27336 1 sis_agp
pcspkr 3288 0
budget_ci 10240 5
tda1004x 12676 3 dvb_ttusb_budget,budget_av,budget_ci
budget_core 6788 3 budget_av,budget,budget_ci
dvb_core 71592 7 b2c2_flexcop,dvb_ttusb_budget,budget_av,budget,dvb _ttpci,budget_ci,budget_core
saa7146 14216 6 budget_av,budget,dvb_ttpci,saa7146_vv,budget_ci,bu dget_core
ttpci_eeprom 2304 2 dvb_ttpci,budget_core
stv0299 9864 6 b2c2_flexcop,dvb_ttusb_budget,budget_av,budget,dvb _ttpci,budget_ci
tda9887 11792 0
tuner 33704 0
saa7134 103508 0
soundcore 6880 2 snd,saa7134
video_buf 16772 2 saa7146_vv,saa7134
v4l2_common 4736 2 saa7146_vv,saa7134
v4l1_compat 12932 2 saa7146_vv,saa7134
ir_common 6916 1 saa7134
videodev 7040 2 saa7146_vv,saa7134
sis900 17664 0
mii 4608 1 sis900
i2c_sis96x 4612 0
st 35232 0
8250 17956 1 8250_pnp
serial_core 17152 1 8250
tsdev 5952 0
usbhid 41056 0
usb_storage 66496 0
ehci_hcd 29192 0
ohci_hcd 18180 0
uhci_hcd 29072 0
usbcore 98556 7 dvb_ttusb_budget,usbhid,usb_storage,ehci_hcd,ohci_ hcd,uhci_hcd
pcmcia 29728 0
yenta_socket 21004 0
rsrc_nonstatic 10880 1 yenta_socket
pcmcia_core 33552 3 pcmcia,yenta_socket,rsrc_nonstatic
video 14212 0
thermal 10760 0
processor 18492 1 thermal
fan 3332 0
container 3200 0
button 5008 0
battery 7684 0
ac 3460 0
ntfs 177680 1
evdev 7168 0
psmouse 29444 0
zierroff@Rasselkiste:~$

sainty0009
16.03.07, 10:27
Wo stellst du denn bei Kaffeine ein, das er AC3 aufnimmt?
Bei funzt das nur, wenn ich manuell die Tonspur AC3 wähle und dann sofort aufnehmen wähle. Bei zeitgesteuerten Aufnahmen will es einfach nicht klappen!