Zy0n
27.08.05, 16:36
Hallo,
ich habe mir eine zweites Linux auf einer 2 HDD installiert. Nun habe ich das bopot Probem.
hier meien fdisk -l:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 2079 16699536 7 HPFS/NTFS
/dev/hda2 2080 9728 61440592+ f W95 Ext'd (LBA)
/dev/hda5 2080 9091 56323858+ 7 HPFS/NTFS
/dev/hda6 9092 9728 5116671 b W95 FAT32
Disk /dev/hdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 851 6835626 83 Linux
/dev/hdb2 852 19457 149452695 5 Extended
/dev/hdb5 852 1039 1510078+ 82 Linux swap / Solaris
/dev/hdb6 1040 19457 147942553+ 83 Linux
Disk /dev/sda: 122.9 GB, 122942324736 bytes
255 heads, 63 sectors/track, 14946 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 14759 118551636 83 Linux
/dev/sda2 14760 14946 1502077+ 5 Extended
/dev/sda5 14760 14946 1502046 82 Linux swap / Solaris
Und hier meien GUBE.conf
title Debian GNU/Linux, kernel 2.6.8-2-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.8-2-686 root=/dev/sda1 ro
initrd /boot/initrd.img-2.6.8-2-686
savedefault
boot
title Debian GNU/Linux, kernel 2.6.8-2-686 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.8-2-686 root=/dev/sda1 ro single
initrd /boot/initrd.img-2.6.8-2-686
savedefault
boot
title Debian SID GNU/Linux, kernel 2.6.12-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.12-1-686 root=/dev/hdb1 ro
initrd /boot/initrd.img-2.6.12-1-686
savedefault
boot
title windows
root (hd1,0)
makeactive
chainloader +1
map (hd0) (hd1)
map (hd1) (hd0)
Das : ""title Debian SID GNU/Linux, kernel 2.6.12-1-686"" Ist das neue. Das will aber nicht, bekomme immer den Fehler Image not found !
Jeamnd ne Idee?
Gruß
Zy0n
ich habe mir eine zweites Linux auf einer 2 HDD installiert. Nun habe ich das bopot Probem.
hier meien fdisk -l:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 2079 16699536 7 HPFS/NTFS
/dev/hda2 2080 9728 61440592+ f W95 Ext'd (LBA)
/dev/hda5 2080 9091 56323858+ 7 HPFS/NTFS
/dev/hda6 9092 9728 5116671 b W95 FAT32
Disk /dev/hdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 851 6835626 83 Linux
/dev/hdb2 852 19457 149452695 5 Extended
/dev/hdb5 852 1039 1510078+ 82 Linux swap / Solaris
/dev/hdb6 1040 19457 147942553+ 83 Linux
Disk /dev/sda: 122.9 GB, 122942324736 bytes
255 heads, 63 sectors/track, 14946 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 14759 118551636 83 Linux
/dev/sda2 14760 14946 1502077+ 5 Extended
/dev/sda5 14760 14946 1502046 82 Linux swap / Solaris
Und hier meien GUBE.conf
title Debian GNU/Linux, kernel 2.6.8-2-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.8-2-686 root=/dev/sda1 ro
initrd /boot/initrd.img-2.6.8-2-686
savedefault
boot
title Debian GNU/Linux, kernel 2.6.8-2-686 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.8-2-686 root=/dev/sda1 ro single
initrd /boot/initrd.img-2.6.8-2-686
savedefault
boot
title Debian SID GNU/Linux, kernel 2.6.12-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.12-1-686 root=/dev/hdb1 ro
initrd /boot/initrd.img-2.6.12-1-686
savedefault
boot
title windows
root (hd1,0)
makeactive
chainloader +1
map (hd0) (hd1)
map (hd1) (hd0)
Das : ""title Debian SID GNU/Linux, kernel 2.6.12-1-686"" Ist das neue. Das will aber nicht, bekomme immer den Fehler Image not found !
Jeamnd ne Idee?
Gruß
Zy0n