Archiv verlassen und diese Seite im Standarddesign anzeigen : Ac97 Controller Probleme
HI!
Ich wollte mit ALSA die Treiber für meine Soundkarte installieren... dies habe ich schon einige Male gemacht und hatte nie ein Problem... nun schon -.-
Ich habe im Kernel den betreffenden Treiber kompiliert und beim Systemstart geladen:
rc-update show
alsasound | boot
Dabei sind noch folgende Fehler gekommen:
ug 11 18:24:40 tux-server modprobe: WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/
snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Aug 11 18:24:40 tux-server modprobe: FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/snd-
pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Aug 11 18:24:43 tux-server modprobe: WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/
snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Aug 11 18:24:43 tux-server modprobe: FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/snd-
pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
und dmesg:
shell>grep audio | dmesg
snd_seq_oss: Unknown symbol snd_unregister_oss_device
snd_seq_oss: Unknown symbol snd_register_oss_device
snd_seq_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
snd_seq_oss: Unknown symbol snd_unregister_oss_device
snd_seq_oss: Unknown symbol snd_register_oss_device
snd_seq_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
Hardwareerkennung:
lspci | grep audio
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Diese Treiber stehen in der /etc/modules.autoload/kernel-2.6
snd-via82xx
snd-mpu401-uart
snd-seq-midi
snd-rawmidi
snd-ac97-codec
snd-intel8x0
Kann mir da jemand weiterhelfen?
gruss
gEry
p.s ich benutze gentoo^^ und habe alsa als module im kernel...
benutze mal nen frischen neuen kernel.
Ich tippe eher mal darauf das einige Module nicht gesetzt sind.
Wie sieht das bei dir aus?
grep -i oss /usr/src/linux-`uname -r`/.config
# CONFIG_CHR_DEV_OSST is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SOUND_OSS=m
MyD : wohl wenig krass, net? :P
undefined:
grep -i oss /usr/src/linux-`uname -r`/.config
# CONFIG_CHR_DEV_OSST is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
Sieht doch korrekt aus oder?
Das macht doch module-update aus, oder nicht?
Eigentlich schon, kann aber auch an einem falschen Modul Parameter in der modprobe.conf liegen Zeige mal deine Konfigurations Abschnitte.
Hi!
Hier:
less /etc/modprobe.conf | grep snd
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
alias snd-card-0 snd-via82xx
alias sound-slot-0 snd-via82xx
So richtig, oder benötigst du noch andere angaben daraus?
Also das ist reichlich wenig und vor allem unvollständig.
Gibt es bei dir die /etc/modprobe.d/sound ?
Hmm nein, ich habe schon gar kein /etc/modprobe.d !
Was ich aber habe ist: /etc/modules.d/alsa:
Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $
# ALSA portion
# OSS/Free portion
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9a ---
alias snd-card-0 snd-via82xx
alias sound-slot-0 snd-via82xx
# --- END: Generated by ALSACONF, do not edit. ---
Naja... die aliases sind ja schon bekannt...
Also doppelte Einträge dürfen schon mal nicht sein.
Ich würde empfehlen das ganze von Hand zu Editieren.
Welche Karte ?
Hmm na ja... würde ich jetzt eher als letzte option in betracht ziehen...
lspci | grep audio
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Ansonsten probier doch einfach folgendes in die /etc/modules.d/alsa einzutragen (danach natürlich update-modules ausführen)
alias snd-card-0 snd-emu10k1
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
(snd-emu10k1 ist durch dein Modul zu ersetzen :-) )
Wenn das nicht hilft, scheint irgendwas mit der OSS Emulation schiefzulaufen.
Habe ich gemacht, hier:
bash-2.05b# nano -w /etc/modules.d/alsa
bash-2.05b# alsamixer
alsamixer: function snd_ctl_open failed for default: No such file or directory
Darauf hin:
find /lib/modules/<kernel version>/ -type f -iname '*.o' -or -iname '*.ko'
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/snd-mixer-oss.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/snd-pcm-oss.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/seq/oss/snd-seq-oss.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/seq/snd-seq-device.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/seq/snd-seq-midi-event.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/seq/snd-seq-midi.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/seq/snd-seq.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/snd-page-alloc.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/snd-pcm.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/snd-rawmidi.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/snd-timer.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/core/snd.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/pci/snd-intel8x0.ko
/lib/modules/2.6.11-hardened-r15/kernel/sound/soundcore.ko
/lib/modules/2.6.11-hardened-r15/video/fglrx.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/snd-page-alloc.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/snd-pcm.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/snd-rawmidi.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/snd-rtctimer.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/snd-timer.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/snd.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/seq/snd-seq-device.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/seq/snd-seq-midi-event.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/seq/snd-seq-midi.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/acore/seq/snd-seq.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/drivers/mpu401/snd-mpu401-uart.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/pci/snd-via82xx.ko
/lib/modules/2.6.11-hardened-r15/alsa-driver/pci/ac97/snd-ac97-codec.ko
Also ich habs nochmal mit alsaconf getestet, der Output:
Running modules-update...
Loading driver...
* Loading ALSA modules...
* Loading: snd-card-0...
FATAL: Module snd_viaxx not found. [ !! ]
* Loading: snd-seq-oss...
FATAL: Error inserting snd_seq_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/seq/oss/snd-seq-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-pcm-oss...
WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/snd-pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-mixer-oss...
FATAL: Error inserting snd_mixer_oss (/lib/modules/2.6.11-hardened-r15/kernel/sound/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* ERROR: Failed to load necessary drivers [ ok ]
* Restoring Mixer Levels... [ ok ]
Setting default volumes...
================================================== =============================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!
bash-2.05b#
Da stimmt immer was noch nicht... aber kA was... ich habe die ALSA Sachen im Kernel als Module compilert... ist doch gut so, oder? Oder muss ich die gleich fix hineinbacken, mit * ? Ich habe irgendwie das gefühl, dass im kernel nicht alles drin ist, was sein sollte... aber ich finde nix... -.-
gruss
gEry
Also dieses update-modules oder was immer es auch sein mag bringt anscheinent nicht viel.
Mach mal bitte ein
cat `find /proc/asound -type f` > /tmp/sound.log
Und hänge das File bitte hier einmal an.
Bei deiner Momentanen module Config fehlen schon mal einige Einträge ;)
Hi!
Hier ist das File... aber ehrlich gesagt, kann ich mit den Infos nicht viel anfangen...
gruss
gEry
Bei dir stimmt im Moment gar nichts. :rolleyes:
Also: Deine Kernel Module Verzeichnis Struktur lässt darauf schliessen das du einmal den Kernel und Alsa Kernel Extra Installiert hast.
Ich Tippe daher mal darauf das Mappen nicht stimmen.
Wenn du ein depmod ausführst, werden alle Module aufgelistet?
depmod -av | grep snd
Wer lesen kann ist klar im Vorteil (auch wer alles hinschreibt was er hinschreiben wollte 8) )
$EDITOR /etc/modules.d/alsa
update-modules
/etc/init.d/alsasound restart
(letzte Zeile hatte ich vergessen dazuzuschreiben...)
lg, Helmut
HI undefined, der output im anhang..
@ henni:
Wer lesen kann ist klar im Vorteil
--> Was hätte ich noch lesen/interpretieren sollen?
Ich habe die /etc/modprobe.d/alsa mit deinen angaben editiert, update-module gemacht und restart, hier der ouput (wie eh und je):
bash-2.05b# /etc/init.d/alsasound restart
* WARNING: you are stopping a boot service.
* Storing ALSA Mixer Levels...
/usr/sbin/alsactl: save_state:1163: No soundcards found... [ !! ]
* Unloading ALSA...
ALSA lib seq_hw.c:455:(snd_seq_hw_open) open /dev/snd/seq failed: No such file o
r directory
can't open sequencer [ ok ]
* Unloading ALSA modules... [ ok ]
* Loading ALSA modules...
* Loading: snd-card-0...
FATAL: Module snd_viaxx not found. [ !! ]
* Loading: snd-seq-oss...
FATAL: Error inserting snd_seq_oss (/lib/modules/2.6.11-hardened-r15/kernel/soun d/core/seq/oss/snd-seq-oss.ko): Unknown symbol in module, or unknown parameter ( see dmesg) [ !! ]
* Loading: snd-pcm-oss...
WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.11-hardened-r15/kernel/ sound/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.11-hardened-r15/kernel/soun d/core/oss/snd-pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-mixer-oss...
FATAL: Error inserting snd_mixer_oss (/lib/modules/2.6.11-hardened-r15/kernel/so und/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter ( see dmesg) [ !! ]
* ERROR: Failed to load necessary drivers [ ok ]
* Restoring Mixer Levels... [ ok ]
bash-2.05b#
gruss
gEry
War ein kleines mißverständnis:
BTW: scheinbar trägt alsaconf oder du (so ganz blicke ich da nicht mehr durch) das falsche snd modul ein:
FATAL: Module snd_viaxx not found. [ !! ]
richtig müsste es aber snd_via82xx heissen:
/lib/modules/2.6.11-hardened-r15/alsa-driver/pci/snd-via82xx.ko
Hmm ja... also in /etc/modules.d/alsa steht:
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9a ---
alias snd-card-0 snd-via82xx
alias sound-slot-0 snd-via82xx
# --- END: Generated by ALSACONF, do not edit. ---
und ich lade das modul ja beim start... in /etc/modules.autoload.d/kernel-2.6...
Also ich denke effektiv, dass irgendwelche Links auf die Module net stimmen, aber wie die anpassen, und wo überall :confused:
Mal davon abgesehen das du wirklich ein ziemliches durcheinander im Modules Verzeichnis hast darf dies aber kein Grund sein weil die Module mit depmod angezeigt werden.
Wenn modinfo snd-via82xx eine fehlerfreie Ausgabe ergibt.
Kannst du mal von Hand laden.
modprobe -v snd-via82xx index=0 ac97_quirk=1
PS: Bisher hast du keine Info über die Karte mitgeteilt, onBoard ja/nein Name der Karte oder mainboard währe Interessant ;)
Hi!
Hier,was ich gemacht habe:
bash-2.05b# modinfo snd-via82xx
author: Jaroslav Kysela <perex@suse.cz>
description: VIA VT82xx audio
license: GPL
parmtype: index:array of int
parm: index:Index value for VIA 82xx bridge.
parmtype: id:array of charp
parm: id:ID string for VIA 82xx bridge.
parmtype: enable:array of bool
parm: enable:Enable audio part of VIA 82xx bridge.
parmtype: mpu_port:array of long
parm: mpu_port:MPU-401 port. (VT82C686x only)
parmtype: ac97_clock:array of int
parm: ac97_clock:AC'97 codec clock (default 48000Hz).
parmtype: ac97_quirk:array of charp
parm: ac97_quirk:AC'97 workaround for strange hardware.
parmtype: dxs_support:array of int
parm: dxs_support:Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA, 5 = enable any sample rate)
vermagic: 2.6.11-hardened-r15 SMP preempt PENTIUM4 4KSTACKS gcc-3.3
depends: snd-ac97-codec,snd-pcm,snd-page-alloc,snd-mpu401-uart,snd,snd
alias: pci:v00001106d00003058sv*sd*bc*sc*i*
alias: pci:v00001106d00003059sv*sd*bc*sc*i*
bash-2.05b# modprobe -v snd-via82xx index=0 ac97_quirk=1
insmod /lib/modules/2.6.11-hardened-r15/alsa-driver/acore/snd-rawmidi.ko
insmod /lib/modules/2.6.11-hardened-r15/alsa-driver/drivers/mpu401/snd-mpu401-uart.ko
insmod /lib/modules/2.6.11-hardened-r15/alsa-driver/pci/ac97/snd-ac97-codec.ko
insmod /lib/modules/2.6.11-hardened-r15/alsa-driver/pci/snd-via82xx.ko index=0 ac97_quirk=1
bash-2.05b# alsamixer
alsamixer: function snd_ctl_open failed for default: No such file or directory
bash-2.05b#
Das Treiber laden hat geklappt, aber der rest wieder mal nicht... wegen dem durcheinander... das hat gentoo selbstständig gemacht... habe alles mit autoconfig versucht... -.-
Hier hw infos:
bash-2.05b# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8374 P4X400 Host Controller/AGP Bridge (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
Mainboard ist ASUS Shuttle.
Sind deine Devices vorhanden?
ls -l /dev/dsp* /dev/snd*
Wenn nicht siehe
/usr/src/linux-`uname -r`/Documentation/devices.txt und man mknod
Hi undefined!
Hehe ja die gibts:
bash-2.05b# ls -l /dev/dsp* /dev/snd*
crw------- 1 root root 14, 3 Nov 22 2004 /dev/dsp
crw------- 1 root root 14, 19 Nov 22 2004 /dev/dsp1
crw------- 1 root root 14, 35 Nov 22 2004 /dev/dsp2
crw------- 1 root root 14, 51 Nov 22 2004 /dev/dsp3
crw------- 1 root root 14, 6 Nov 22 2004 /dev/sndstat
Kann ich nicht irgendwie alle aliases und Links löschen und reseten und dannach nochmals von vorne beginnen? (mit: http://www.gentoo.org/doc/en/alsa-guide.xml) ich begreiffs net, an diesem Rechner habe ich das schon 5 mal gemacht und hatte bisher nie Probleme!
Nein sie sind nicht da ;)
Es fehlt das Verzeichnis "snd" mit allen midi,pcm,seq und timer Devices ;)
Also ich würde sagen - einen Neuen Kernel backen und diesmal ohne alsa extra zu Installieren, alsa ist seit Kernel 2.6 ohnehin im Kernel enthalten.
hmm, aber ich habe ja alsa nicht extra installiert!?
habs gleich mit dem USE flag mitgenommen und installiert! jetzt sind es einfach module und nicht fest drin, aber das lässt sich ja einfach wieder ändern..
Wenn ich den Code von undefined eingebe
Erscheint bei mir das
/lib/modules/2.6.13-15-default/kernel/sound/acore/snd-pcm.ko needs "snd_info_register": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko
/lib/modules/2.6.13-15-default/kernel/sound/acore/snd-pcm.ko needs "snd_info_create_module_entry": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko
/lib/modules/2.6.13-15-default/kernel/sound/acore/seq/oss/snd-seq-oss.ko needs "snd_info_create_module_entry": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko
/lib/modules/2.6.13-15-default/kernel/sound/acore/seq/oss/snd-seq-oss.ko needs "snd_seq_delete_kernel_client": /lib/modules/2.6.13-15-default/kernel/sound/acore/seq/snd-seq.ko
/lib/modules/2.6.13-15-default/kernel/sound/acore/seq/oss/snd-seq-oss.ko needs "snd_seq_autoload_lock": /lib/modules/2.6.13-15-default/kernel/sound/acore/seq/snd-seq-device.ko
/lib/modules/2.6.13-15-default/kernel/sound/acore/seq/oss/snd-seq-oss.ko needs "snd_seq_kernel_client_dispatch": /lib/modules/2.6.13-15-default/kernel/sound/acore/seq/snd-seq.ko
/lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_info_create_card_entry": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko
/lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_info_unregister": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko
über modprobe snd_intel8x0 kommt
WARNING: Error inserting snd (/lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.13-15-default/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.13-15-default/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.13-15-default/kernel/sound/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg)
über den Befehl dmesg kommt:
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196592
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 192496 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6d80
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff7500
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: local apic disabled
Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)
Built 1 zonelists
Kernel command line: root=/dev/sda3 vga=0x317 selinux=0 resume=/dev/sda2 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1492.170 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773584k/786368k available (2028k kernel code, 12104k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2987.67 BogoMIPS (lpj=5975342)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) XP 1800+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1751k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0820)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: nForce2 C1 Halt Disconnect fixup
Boot video device is 0000:03:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1150634517.908:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd0000000, mapped to 0xf0880000, using 6144k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:d390
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
Console: switching to colour frame buffer device 127x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
NFORCE2: IDE controller at PCI slot 0000:00:09.0
ACPI-0212: *** Warning: Device is not power manageable
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
hdb: WDC WD1600JB-00DUA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: max request size: 1024KiB
hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2
Probing IDE interface ide1...
hdc: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
libata version 1.12 loaded.
sata_sil version 0.9
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
ata1: SATA max UDMA/100 cmd 0xF0828080 ctl 0xF082808A bmdma 0xF0828000 irq 11
ata2: SATA max UDMA/100 cmd 0xF08280C0 ctl 0xF08280CA bmdma 0xF0828008 irq 11
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 390721968 sectors: lba48
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
Vendor: ATA Model: WDC WD2000JD-00G Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ACPI: CPU0 (power states: C1[C1])
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attempting manual resume
swsusp: Suspend partition has wrong signature?
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
NTFS driver 2.1.23 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs error (device hdb1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (6143 buckets, 49144 max) - 248 bytes per conntrack
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Adding 9237364k swap on /dev/sda2. Priority:-1 extents:1
lp0: using parport0 (interrupt-driven).
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
usbcore: registered new driver usbfs
usbcore: registered new driver hub
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 5, io mem 0xe4086000
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 11, io mem 0xe4081000
snd_page_alloc: module not supported by Novell, setting U taint flag.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 5, io mem 0xe4082000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
snd: module not supported by Novell, setting U taint flag.
snd: Unknown symbol unregister_sound_special
snd: Unknown symbol register_sound_special_device
snd: Unknown symbol sound_class
snd_timer: module not supported by Novell, setting U taint flag.
snd_timer: Unknown symbol snd_info_register
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_compat_kzalloc
snd_timer: Unknown symbol snd_iprintf
snd_timer: Unknown symbol snd_ecards_limit
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: Unknown symbol snd_unregister_device
snd_timer: Unknown symbol snd_device_new
snd_timer: Unknown symbol snd_info_unregister
snd_timer: Unknown symbol snd_register_device
snd_pcm: module not supported by Novell, setting U taint flag.
snd_pcm: Unknown symbol snd_info_register
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_info_get_str
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: Unknown symbol snd_compat_kzalloc
snd_pcm: Unknown symbol snd_iprintf
snd_pcm: Unknown symbol snd_major
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_lookup_minor_data
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_power_wait
snd_pcm: Unknown symbol snd_device_free
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_info_unregister
snd_pcm: Unknown symbol snd_device_register
snd_pcm: Unknown symbol snd_register_device
snd_pcm: Unknown symbol snd_info_get_line
snd_ac97_bus: module not supported by Novell, setting U taint flag.
ieee1394: Initialized config rom entry `ip1394'
snd_ac97_codec: module not supported by Novell, setting U taint flag.
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_compat_kzalloc
snd_ac97_codec: Unknown symbol snd_iprintf
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_unregister
snd_intel8x0: module not supported by Novell, setting U taint flag.
snd_intel8x0: Unknown symbol snd_ac97_pcm_close
snd_intel8x0: Unknown symbol snd_ac97_resume
snd_intel8x0: Unknown symbol snd_pcm_new
snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates
snd_intel8x0: Unknown symbol snd_card_register
snd_intel8x0: Unknown symbol snd_card_free
snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_intel8x0: Unknown symbol snd_card_proc_new
snd_intel8x0: Unknown symbol snd_ac97_pcm_open
snd_intel8x0: Unknown symbol snd_ac97_set_rate
snd_intel8x0: Unknown symbol snd_ac97_update_bits
snd_intel8x0: Unknown symbol snd_ac97_mixer
snd_intel8x0: Unknown symbol snd_ac97_bus
snd_intel8x0: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules
snd_intel8x0: Unknown symbol snd_compat_kzalloc
snd_intel8x0: Unknown symbol snd_card_new
snd_intel8x0: Unknown symbol snd_ac97_suspend
snd_intel8x0: Unknown symbol snd_iprintf
snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages
snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl
snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages
snd_intel8x0: Unknown symbol snd_pcm_set_ops
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list
snd_intel8x0: Unknown symbol snd_device_new
snd_intel8x0: Unknown symbol snd_ac97_get_short_name
snd_intel8x0: Unknown symbol snd_pcm_suspend_all
snd_intel8x0: Unknown symbol snd_ac97_pcm_assign
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits
snd_intel8x0: Unknown symbol snd_pcm_period_elapsed
snd_intel8x0: Unknown symbol snd_ac97_tune_hardware
Linux video capture interface: v1.00
ivtv_tveeprom: module not supported by Novell, setting U taint flag.
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LFIR] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e4084000-e40847ff] Max Packet=[2048]
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 5
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [L3CM] -> GSI 5 (level, low) -> IRQ 5
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 11, latency: 32, mmio: 0xdc000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
tveeprom: Hauppauge: model = 44804, rev = C129, serial# = 3908411
tveeprom: tuner = Temic 4006FH5 (idx = 29, type = 14)
tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
tveeprom: audio_processor = None (type = 0)
tveeprom: Hauppauge: model = 44804, rev = C129, serial# = 3908411
tveeprom: tuner = Temic 4006FH5 (idx = 29, type = 14)
tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
tveeprom: audio_processor = None (type = 0)
bttv0: using tuner=14
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
usb 2-2: new low speed USB device using ohci_hcd and address 2
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425, pic16c54 (PV951),ta8874z
bttv0: i2c: checking for TDA9887 @ 0x86... not found
: chip found @ 0xc2 (bt878 #0 [sw])
tuner 2-0061: type set to 14 (Temic PAL_BG (4006FH5))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:01:08.1[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
bt878(0): Bt878 (rev 17) at 01:08.1, irq: 11, latency: 32, memory: 0xdc001000
usb 2-3: new full speed USB device using ohci_hcd and address 3
pwc: module not supported by Novell, setting U taint flag.
pwc Philips webcam module version 9.0.2-unofficial loaded.
pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc Logitech QuickCam 4000 Pro USB webcam detected.
pwc Registered as /dev/video1.
usbcore: registered new driver Philips webcam
usbcore: registered new driver hiddev
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
bootsplash: status on console 0 changed to on
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
eth0: no link during initialization.
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [L3CM] -> GSI 5 (level, low) -> IRQ 5
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 not a capable Intel processor
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
powernow-k8: Processor cpuid 681 not supported
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
eth1: no IPv6 routers present
pwc Failed to set LED on/off time.
pwc type = 740
pwc type = 740
pwc set_video_mode(176x144 @ 10, palette 15).
pwc decode_size = 1.
pwc Using alternate setting 1.
bootsplash: status on console 0 changed to on
pwc type = 740
pwc type = 740
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc Using alternate setting 1.
snd: module not supported by Novell, setting U taint flag.
snd: Unknown symbol unregister_sound_special
snd: Unknown symbol register_sound_special_device
snd: Unknown symbol sound_class
snd_timer: module not supported by Novell, setting U taint flag.
snd_timer: Unknown symbol snd_info_register
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_compat_kzalloc
snd_timer: Unknown symbol snd_iprintf
snd_timer: Unknown symbol snd_ecards_limit
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: Unknown symbol snd_unregister_device
snd_timer: Unknown symbol snd_device_new
snd_timer: Unknown symbol snd_info_unregister
snd_timer: Unknown symbol snd_register_device
snd_pcm: module not supported by Novell, setting U taint flag.
snd_pcm: Unknown symbol snd_info_register
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_info_get_str
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: Unknown symbol snd_compat_kzalloc
snd_pcm: Unknown symbol snd_iprintf
snd_pcm: Unknown symbol snd_major
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_lookup_minor_data
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_power_wait
snd_pcm: Unknown symbol snd_device_free
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_info_unregister
snd_pcm: Unknown symbol snd_device_register
snd_pcm: Unknown symbol snd_register_device
snd_pcm: Unknown symbol snd_info_get_line
snd_ac97_codec: module not supported by Novell, setting U taint flag.
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_compat_kzalloc
snd_ac97_codec: Unknown symbol snd_iprintf
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_unregister
snd_intel8x0: module not supported by Novell, setting U taint flag.
snd_intel8x0: Unknown symbol snd_ac97_pcm_close
snd_intel8x0: Unknown symbol snd_ac97_resume
snd_intel8x0: Unknown symbol snd_pcm_new
snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates
snd_intel8x0: Unknown symbol snd_card_register
snd_intel8x0: Unknown symbol snd_card_free
snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_intel8x0: Unknown symbol snd_card_proc_new
snd_intel8x0: Unknown symbol snd_ac97_pcm_open
snd_intel8x0: Unknown symbol snd_ac97_set_rate
snd_intel8x0: Unknown symbol snd_ac97_update_bits
snd_intel8x0: Unknown symbol snd_ac97_mixer
snd_intel8x0: Unknown symbol snd_ac97_bus
snd_intel8x0: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules
snd_intel8x0: Unknown symbol snd_compat_kzalloc
snd_intel8x0: Unknown symbol snd_card_new
snd_intel8x0: Unknown symbol snd_ac97_suspend
snd_intel8x0: Unknown symbol snd_iprintf
snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages
snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl
snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages
snd_intel8x0: Unknown symbol snd_pcm_set_ops
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list
snd_intel8x0: Unknown symbol snd_device_new
snd_intel8x0: Unknown symbol snd_ac97_get_short_name
snd_intel8x0: Unknown symbol snd_pcm_suspend_all
snd_intel8x0: Unknown symbol snd_ac97_pcm_assign
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits
snd_intel8x0: Unknown symbol snd_pcm_period_elapsed
snd_intel8x0: Unknown symbol snd_ac97_tune_hardware
snd: module not supported by Novell, setting U taint flag.
snd: Unknown symbol unregister_sound_special
snd: Unknown symbol register_sound_special_device
snd: Unknown symbol sound_class
snd_mixer_oss: module not supported by Novell, setting U taint flag.
snd_mixer_oss: Unknown symbol snd_info_register
snd_mixer_oss: Unknown symbol snd_info_free_entry
snd_mixer_oss: Unknown symbol snd_info_get_str
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_ctl_find_id
snd_mixer_oss: Unknown symbol snd_verbose_printk
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_card_file_add
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_compat_kzalloc
snd_mixer_oss: Unknown symbol snd_iprintf
snd_mixer_oss: Unknown symbol snd_cards
snd_mixer_oss: Unknown symbol snd_ctl_notify
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_lookup_oss_minor_data
snd_mixer_oss: Unknown symbol snd_info_create_card_entry
snd_mixer_oss: Unknown symbol snd_card_file_remove
snd_mixer_oss: Unknown symbol snd_info_unregister
snd_mixer_oss: Unknown symbol snd_ctl_find_numid
snd_mixer_oss: Unknown symbol snd_info_get_line
snd: module not supported by Novell, setting U taint flag.
snd: Unknown symbol unregister_sound_special
snd: Unknown symbol register_sound_special_device
snd: Unknown symbol sound_class
snd_timer: module not supported by Novell, setting U taint flag.
snd_timer: Unknown symbol snd_info_register
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_compat_kzalloc
snd_timer: Unknown symbol snd_iprintf
snd_timer: Unknown symbol snd_ecards_limit
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: Unknown symbol snd_unregister_device
snd_timer: Unknown symbol snd_device_new
snd_timer: Unknown symbol snd_info_unregister
snd_timer: Unknown symbol snd_register_device
snd_pcm: module not supported by Novell, setting U taint flag.
snd_pcm: Unknown symbol snd_info_register
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_info_get_str
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: Unknown symbol snd_compat_kzalloc
snd_pcm: Unknown symbol snd_iprintf
snd_pcm: Unknown symbol snd_major
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_lookup_minor_data
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_power_wait
snd_pcm: Unknown symbol snd_device_free
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_info_unregister
snd_pcm: Unknown symbol snd_device_register
snd_pcm: Unknown symbol snd_register_device
snd_pcm: Unknown symbol snd_info_get_line
snd_ac97_codec: module not supported by Novell, setting U taint flag.
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_compat_kzalloc
snd_ac97_codec: Unknown symbol snd_iprintf
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_unregister
snd_intel8x0: module not supported by Novell, setting U taint flag.
snd_intel8x0: Unknown symbol snd_ac97_pcm_close
snd_intel8x0: Unknown symbol snd_ac97_resume
snd_intel8x0: Unknown symbol snd_pcm_new
snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates
snd_intel8x0: Unknown symbol snd_card_register
snd_intel8x0: Unknown symbol snd_card_free
snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_intel8x0: Unknown symbol snd_card_proc_new
snd_intel8x0: Unknown symbol snd_ac97_pcm_open
snd_intel8x0: Unknown symbol snd_ac97_set_rate
snd_intel8x0: Unknown symbol snd_ac97_update_bits
snd_intel8x0: Unknown symbol snd_ac97_mixer
snd_intel8x0: Unknown symbol snd_ac97_bus
snd_intel8x0: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules
snd_intel8x0: Unknown symbol snd_compat_kzalloc
snd_intel8x0: Unknown symbol snd_card_new
snd_intel8x0: Unknown symbol snd_ac97_suspend
snd_intel8x0: Unknown symbol snd_iprintf
snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages
snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl
snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages
snd_intel8x0: Unknown symbol snd_pcm_set_ops
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list
snd_intel8x0: Unknown symbol snd_device_new
snd_intel8x0: Unknown symbol snd_ac97_get_short_name
snd_intel8x0: Unknown symbol snd_pcm_suspend_all
snd_intel8x0: Unknown symbol snd_ac97_pcm_assign
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits
snd_intel8x0: Unknown symbol snd_pcm_period_elapsed
snd_intel8x0: Unknown symbol snd_ac97_tune_hardware
snd: module not supported by Novell, setting U taint flag.
snd: Unknown symbol unregister_sound_special
snd: Unknown symbol register_sound_special_device
snd: Unknown symbol sound_class
snd_timer: module not supported by Novell, setting U taint flag.
snd_timer: Unknown symbol snd_info_register
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_compat_kzalloc
snd_timer: Unknown symbol snd_iprintf
snd_timer: Unknown symbol snd_ecards_limit
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: Unknown symbol snd_unregister_device
snd_timer: Unknown symbol snd_device_new
snd_timer: Unknown symbol snd_info_unregister
snd_timer: Unknown symbol snd_register_device
snd_pcm: module not supported by Novell, setting U taint flag.
snd_pcm: Unknown symbol snd_info_register
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_info_get_str
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: Unknown symbol snd_compat_kzalloc
snd_pcm: Unknown symbol snd_iprintf
snd_pcm: Unknown symbol snd_major
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_lookup_minor_data
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_power_wait
snd_pcm: Unknown symbol snd_device_free
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_info_unregister
snd_pcm: Unknown symbol snd_device_register
snd_pcm: Unknown symbol snd_register_device
snd_pcm: Unknown symbol snd_info_get_line
snd_ac97_codec: module not supported by Novell, setting U taint flag.
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_compat_kzalloc
snd_ac97_codec: Unknown symbol snd_iprintf
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_unregister
snd_intel8x0: module not supported by Novell, setting U taint flag.
snd_intel8x0: Unknown symbol snd_ac97_pcm_close
snd_intel8x0: Unknown symbol snd_ac97_resume
snd_intel8x0: Unknown symbol snd_pcm_new
snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates
snd_intel8x0: Unknown symbol snd_card_register
snd_intel8x0: Unknown symbol snd_card_free
snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_intel8x0: Unknown symbol snd_card_proc_new
snd_intel8x0: Unknown symbol snd_ac97_pcm_open
snd_intel8x0: Unknown symbol snd_ac97_set_rate
snd_intel8x0: Unknown symbol snd_ac97_update_bits
snd_intel8x0: Unknown symbol snd_ac97_mixer
snd_intel8x0: Unknown symbol snd_ac97_bus
snd_intel8x0: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules
snd_intel8x0: Unknown symbol snd_compat_kzalloc
snd_intel8x0: Unknown symbol snd_card_new
snd_intel8x0: Unknown symbol snd_ac97_suspend
snd_intel8x0: Unknown symbol snd_iprintf
snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages
snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl
snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages
snd_intel8x0: Unknown symbol snd_pcm_set_ops
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list
snd_intel8x0: Unknown symbol snd_device_new
snd_intel8x0: Unknown symbol snd_ac97_get_short_name
snd_intel8x0: Unknown symbol snd_pcm_suspend_all
snd_intel8x0: Unknown symbol snd_ac97_pcm_assign
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer
snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits
snd_intel8x0: Unknown symbol snd_pcm_period_elapsed
snd_intel8x0: Unknown symbol snd_ac97_tune_hardware
über alsamixer
alsamixer: function snd_ctl_open failed for default: No such device
alsaconfig hab ich schon mehrfach probiert und angeschaut was ich noch verändern könnte damit das funktioniert
mfg florian
Hallo ich habe auch ein derartiges Problem habe mit alsaconf und make menuconfig mehrfach Verschiedene einstellungen ausprobiert Wenn ich den Alsamixer öffnen möchte erscheint:
alsamixer: function snd_ctl_open failed for default: No such device über dmsg erscheint:
snd: module not supported by Novell, setting U taint flag. snd: Unknown symbol unregister_sound_special snd: Unknown symbol register_sound_special_device snd: Unknown symbol sound_class snd_timer: module not supported by Novell, setting U taint flag. snd_timer: Unknown symbol snd_info_register snd_timer: Unknown symbol snd_info_create_module_entry snd_timer: Unknown symbol snd_info_free_entry snd_timer: Unknown symbol snd_verbose_printk snd_timer: Unknown symbol snd_compat_kzalloc snd_timer: Unknown symbol snd_iprintf snd_timer: Unknown symbol snd_ecards_limit snd_timer: Unknown symbol snd_oss_info_register snd_timer: Unknown symbol snd_unregister_device snd_timer: Unknown symbol snd_device_new snd_timer: Unknown symbol snd_info_unregister snd_timer: Unknown symbol snd_register_device snd_pcm: module not supported by Novell, setting U taint flag. snd_pcm: Unknown symbol snd_info_register snd_pcm: Unknown symbol snd_info_create_module_entry snd_pcm: Unknown symbol snd_timer_notify snd_pcm: Unknown symbol snd_timer_interrupt snd_pcm: Unknown symbol snd_info_free_entry snd_pcm: Unknown symbol snd_info_get_str snd_pcm: Unknown symbol snd_verbose_printk snd_pcm: Unknown symbol snd_ctl_register_ioctl snd_pcm: Unknown symbol snd_card_file_add snd_pcm: Unknown symbol snd_compat_kzalloc snd_pcm: Unknown symbol snd_iprintf snd_pcm: Unknown symbol snd_major snd_pcm: Unknown symbol snd_unregister_device snd_pcm: Unknown symbol snd_timer_new snd_pcm: Unknown symbol snd_device_new snd_pcm: Unknown symbol snd_ctl_unregister_ioctl snd_pcm: Unknown symbol snd_lookup_minor_data snd_pcm: Unknown symbol snd_info_create_card_entry snd_pcm: Unknown symbol snd_power_wait snd_pcm: Unknown symbol snd_device_free snd_pcm: Unknown symbol snd_card_file_remove snd_pcm: Unknown symbol snd_info_unregister snd_pcm: Unknown symbol snd_device_register snd_pcm: Unknown symbol snd_register_device snd_pcm: Unknown symbol snd_info_get_line snd_ac97_codec: module not supported by Novell, setting U taint flag. snd_ac97_codec: Unknown symbol snd_info_register snd_ac97_codec: Unknown symbol snd_ctl_add snd_ac97_codec: Unknown symbol snd_info_free_entry snd_ac97_codec: Unknown symbol snd_interval_refine snd_ac97_codec: Unknown symbol snd_ctl_find_id snd_ac97_codec: Unknown symbol snd_verbose_printk snd_ac97_codec: Unknown symbol snd_ctl_new1 snd_ac97_codec: Unknown symbol snd_ctl_remove_id snd_ac97_codec: Unknown symbol snd_component_add snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add snd_ac97_codec: Unknown symbol snd_compat_kzalloc snd_ac97_codec: Unknown symbol snd_iprintf snd_ac97_codec: Unknown symbol snd_device_new snd_ac97_codec: Unknown symbol snd_info_create_card_entry snd_ac97_codec: Unknown symbol snd_info_unregister snd_intel8x0: module not supported by Novell, setting U taint flag. snd_intel8x0: Unknown symbol snd_ac97_pcm_close snd_intel8x0: Unknown symbol snd_ac97_resume snd_intel8x0: Unknown symbol snd_pcm_new snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates snd_intel8x0: Unknown symbol snd_card_register snd_intel8x0: Unknown symbol snd_card_free snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all snd_intel8x0: Unknown symbol snd_card_proc_new snd_intel8x0: Unknown symbol snd_ac97_pcm_open snd_intel8x0: Unknown symbol snd_ac97_set_rate snd_intel8x0: Unknown symbol snd_ac97_update_bits snd_intel8x0: Unknown symbol snd_ac97_mixer snd_intel8x0: Unknown symbol snd_ac97_bus snd_intel8x0: Unknown symbol snd_verbose_printk snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules snd_intel8x0: Unknown symbol snd_compat_kzalloc snd_intel8x0: Unknown symbol snd_card_new snd_intel8x0: Unknown symbol snd_ac97_suspend snd_intel8x0: Unknown symbol snd_iprintf snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages snd_intel8x0: Unknown symbol snd_pcm_set_ops snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list snd_intel8x0: Unknown symbol snd_device_new snd_intel8x0: Unknown symbol snd_ac97_get_short_name snd_intel8x0: Unknown symbol snd_pcm_suspend_all snd_intel8x0: Unknown symbol snd_ac97_pcm_assign snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits snd_intel8x0: Unknown symbol snd_pcm_period_elapsed snd_intel8x0: Unknown symbol snd_ac97_tune_hardware snd: module not supported by Novell, setting U taint flag. snd: Unknown symbol unregister_sound_special snd: Unknown symbol register_sound_special_device snd: Unknown symbol sound_class snd_mixer_oss: module not supported by Novell, setting U taint flag. snd_mixer_oss: Unknown symbol snd_info_register snd_mixer_oss: Unknown symbol snd_info_free_entry snd_mixer_oss: Unknown symbol snd_info_get_str snd_mixer_oss: Unknown symbol snd_unregister_oss_device snd_mixer_oss: Unknown symbol snd_ctl_find_id snd_mixer_oss: Unknown symbol snd_verbose_printk snd_mixer_oss: Unknown symbol snd_register_oss_device snd_mixer_oss: Unknown symbol snd_card_file_add snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback snd_mixer_oss: Unknown symbol snd_compat_kzalloc snd_mixer_oss: Unknown symbol snd_iprintf snd_mixer_oss: Unknown symbol snd_cards snd_mixer_oss: Unknown symbol snd_ctl_notify snd_mixer_oss: Unknown symbol snd_oss_info_register snd_mixer_oss: Unknown symbol snd_lookup_oss_minor_data snd_mixer_oss: Unknown symbol snd_info_create_card_entry snd_mixer_oss: Unknown symbol snd_card_file_remove snd_mixer_oss: Unknown symbol snd_info_unregister snd_mixer_oss: Unknown symbol snd_ctl_find_numid snd_mixer_oss: Unknown symbol snd_info_get_line snd: module not supported by Novell, setting U taint flag. snd: Unknown symbol unregister_sound_special snd: Unknown symbol register_sound_special_device snd: Unknown symbol sound_class snd_timer: module not supported by Novell, setting U taint flag. snd_timer: Unknown symbol snd_info_register snd_timer: Unknown symbol snd_info_create_module_entry snd_timer: Unknown symbol snd_info_free_entry snd_timer: Unknown symbol snd_verbose_printk snd_timer: Unknown symbol snd_compat_kzalloc snd_timer: Unknown symbol snd_iprintf snd_timer: Unknown symbol snd_ecards_limit snd_timer: Unknown symbol snd_oss_info_register snd_timer: Unknown symbol snd_unregister_device snd_timer: Unknown symbol snd_device_new snd_timer: Unknown symbol snd_info_unregister snd_timer: Unknown symbol snd_register_device snd_pcm: module not supported by Novell, setting U taint flag. snd_pcm: Unknown symbol snd_info_register snd_pcm: Unknown symbol snd_info_create_module_entry snd_pcm: Unknown symbol snd_timer_notify snd_pcm: Unknown symbol snd_timer_interrupt snd_pcm: Unknown symbol snd_info_free_entry snd_pcm: Unknown symbol snd_info_get_str snd_pcm: Unknown symbol snd_verbose_printk snd_pcm: Unknown symbol snd_ctl_register_ioctl snd_pcm: Unknown symbol snd_card_file_add snd_pcm: Unknown symbol snd_compat_kzalloc snd_pcm: Unknown symbol snd_iprintf snd_pcm: Unknown symbol snd_major snd_pcm: Unknown symbol snd_unregister_device snd_pcm: Unknown symbol snd_timer_new snd_pcm: Unknown symbol snd_device_new snd_pcm: Unknown symbol snd_ctl_unregister_ioctl snd_pcm: Unknown symbol snd_lookup_minor_data snd_pcm: Unknown symbol snd_info_create_card_entry snd_pcm: Unknown symbol snd_power_wait snd_pcm: Unknown symbol snd_device_free snd_pcm: Unknown symbol snd_card_file_remove snd_pcm: Unknown symbol snd_info_unregister snd_pcm: Unknown symbol snd_device_register snd_pcm: Unknown symbol snd_register_device snd_pcm: Unknown symbol snd_info_get_line snd_ac97_codec: module not supported by Novell, setting U taint flag. snd_ac97_codec: Unknown symbol snd_info_register snd_ac97_codec: Unknown symbol snd_ctl_add snd_ac97_codec: Unknown symbol snd_info_free_entry snd_ac97_codec: Unknown symbol snd_interval_refine snd_ac97_codec: Unknown symbol snd_ctl_find_id snd_ac97_codec: Unknown symbol snd_verbose_printk snd_ac97_codec: Unknown symbol snd_ctl_new1 snd_ac97_codec: Unknown symbol snd_ctl_remove_id snd_ac97_codec: Unknown symbol snd_component_add snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add snd_ac97_codec: Unknown symbol snd_compat_kzalloc snd_ac97_codec: Unknown symbol snd_iprintf snd_ac97_codec: Unknown symbol snd_device_new snd_ac97_codec: Unknown symbol snd_info_create_card_entry snd_ac97_codec: Unknown symbol snd_info_unregister snd_intel8x0: module not supported by Novell, setting U taint flag. snd_intel8x0: Unknown symbol snd_ac97_pcm_close snd_intel8x0: Unknown symbol snd_ac97_resume snd_intel8x0: Unknown symbol snd_pcm_new snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates snd_intel8x0: Unknown symbol snd_card_register snd_intel8x0: Unknown symbol snd_card_free snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all snd_intel8x0: Unknown symbol snd_card_proc_new snd_intel8x0: Unknown symbol snd_ac97_pcm_open snd_intel8x0: Unknown symbol snd_ac97_set_rate snd_intel8x0: Unknown symbol snd_ac97_update_bits snd_intel8x0: Unknown symbol snd_ac97_mixer snd_intel8x0: Unknown symbol snd_ac97_bus snd_intel8x0: Unknown symbol snd_verbose_printk snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules snd_intel8x0: Unknown symbol snd_compat_kzalloc snd_intel8x0: Unknown symbol snd_card_new snd_intel8x0: Unknown symbol snd_ac97_suspend snd_intel8x0: Unknown symbol snd_iprintf snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages snd_intel8x0: Unknown symbol snd_pcm_set_ops snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list snd_intel8x0: Unknown symbol snd_device_new snd_intel8x0: Unknown symbol snd_ac97_get_short_name snd_intel8x0: Unknown symbol snd_pcm_suspend_all snd_intel8x0: Unknown symbol snd_ac97_pcm_assign snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits snd_intel8x0: Unknown symbol snd_pcm_period_elapsed snd_intel8x0: Unknown symbol snd_ac97_tune_hardware snd: module not supported by Novell, setting U taint flag. snd: Unknown symbol unregister_sound_special snd: Unknown symbol register_sound_special_device snd: Unknown symbol sound_class snd_timer: module not supported by Novell, setting U taint flag. snd_timer: Unknown symbol snd_info_register snd_timer: Unknown symbol snd_info_create_module_entry snd_timer: Unknown symbol snd_info_free_entry snd_timer: Unknown symbol snd_verbose_printk snd_timer: Unknown symbol snd_compat_kzalloc snd_timer: Unknown symbol snd_iprintf snd_timer: Unknown symbol snd_ecards_limit snd_timer: Unknown symbol snd_oss_info_register snd_timer: Unknown symbol snd_unregister_device snd_timer: Unknown symbol snd_device_new snd_timer: Unknown symbol snd_info_unregister snd_timer: Unknown symbol snd_register_device snd_pcm: module not supported by Novell, setting U taint flag. snd_pcm: Unknown symbol snd_info_register snd_pcm: Unknown symbol snd_info_create_module_entry snd_pcm: Unknown symbol snd_timer_notify snd_pcm: Unknown symbol snd_timer_interrupt snd_pcm: Unknown symbol snd_info_free_entry snd_pcm: Unknown symbol snd_info_get_str snd_pcm: Unknown symbol snd_verbose_printk snd_pcm: Unknown symbol snd_ctl_register_ioctl snd_pcm: Unknown symbol snd_card_file_add snd_pcm: Unknown symbol snd_compat_kzalloc snd_pcm: Unknown symbol snd_iprintf snd_pcm: Unknown symbol snd_major snd_pcm: Unknown symbol snd_unregister_device snd_pcm: Unknown symbol snd_timer_new snd_pcm: Unknown symbol snd_device_new snd_pcm: Unknown symbol snd_ctl_unregister_ioctl snd_pcm: Unknown symbol snd_lookup_minor_data snd_pcm: Unknown symbol snd_info_create_card_entry snd_pcm: Unknown symbol snd_power_wait snd_pcm: Unknown symbol snd_device_free snd_pcm: Unknown symbol snd_card_file_remove snd_pcm: Unknown symbol snd_info_unregister snd_pcm: Unknown symbol snd_device_register snd_pcm: Unknown symbol snd_register_device snd_pcm: Unknown symbol snd_info_get_line snd_ac97_codec: module not supported by Novell, setting U taint flag. snd_ac97_codec: Unknown symbol snd_info_register snd_ac97_codec: Unknown symbol snd_ctl_add snd_ac97_codec: Unknown symbol snd_info_free_entry snd_ac97_codec: Unknown symbol snd_interval_refine snd_ac97_codec: Unknown symbol snd_ctl_find_id snd_ac97_codec: Unknown symbol snd_verbose_printk snd_ac97_codec: Unknown symbol snd_ctl_new1 snd_ac97_codec: Unknown symbol snd_ctl_remove_id snd_ac97_codec: Unknown symbol snd_component_add snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add snd_ac97_codec: Unknown symbol snd_compat_kzalloc snd_ac97_codec: Unknown symbol snd_iprintf snd_ac97_codec: Unknown symbol snd_device_new snd_ac97_codec: Unknown symbol snd_info_create_card_entry snd_ac97_codec: Unknown symbol snd_info_unregister snd_intel8x0: module not supported by Novell, setting U taint flag. snd_intel8x0: Unknown symbol snd_ac97_pcm_close snd_intel8x0: Unknown symbol snd_ac97_resume snd_intel8x0: Unknown symbol snd_pcm_new snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates snd_intel8x0: Unknown symbol snd_card_register snd_intel8x0: Unknown symbol snd_card_free snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all snd_intel8x0: Unknown symbol snd_card_proc_new snd_intel8x0: Unknown symbol snd_ac97_pcm_open snd_intel8x0: Unknown symbol snd_ac97_set_rate snd_intel8x0: Unknown symbol snd_ac97_update_bits snd_intel8x0: Unknown symbol snd_ac97_mixer snd_intel8x0: Unknown symbol snd_ac97_bus snd_intel8x0: Unknown symbol snd_verbose_printk snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules snd_intel8x0: Unknown symbol snd_compat_kzalloc snd_intel8x0: Unknown symbol snd_card_new snd_intel8x0: Unknown symbol snd_ac97_suspend snd_intel8x0: Unknown symbol snd_iprintf snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages snd_intel8x0: Unknown symbol snd_pcm_set_ops snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list snd_intel8x0: Unknown symbol snd_device_new snd_intel8x0: Unknown symbol snd_ac97_get_short_name snd_intel8x0: Unknown symbol snd_pcm_suspend_all snd_intel8x0: Unknown symbol snd_ac97_pcm_assign snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits snd_intel8x0: Unknown symbol snd_pcm_period_elapsed snd_intel8x0: Unknown symbol snd_ac97_tune_hardware über modprobe snd_intel8x0:
WARNING: Error inserting snd (/lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_timer (/lib/modules/2.6.13-15-default/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_pcm (/lib/modules/2.6.13-15-default/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.13-15-default/kernel/sound/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg) und über depmod -av | grep snd bekomme ich:
d_info_register": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_ctl_add": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_info_free_entry": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_interval_refine": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd-pcm.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_ctl_find_id": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_verbose_printk": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_ctl_new1": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_ctl_remove_id": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_component_add": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_pcm_hw_rule_add": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd-pcm.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_compat_kzalloc": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_iprintf": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "ac97_bus_type": /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-bus.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_device_new": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_info_create_card_entry": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko /lib/modules/2.6.13-15-default/kernel/sound/pci/ac97/snd-ac97-codec.ko needs "snd_info_unregister": /lib/modules/2.6.13-15-default/kernel/sound/acore/snd.ko liste habe ich gekürzt wegen der Zeichenbegrenzung was kann ich denn da tun?? mfg florian
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.