farion
10.07.05, 01:29
Hallo
Also ich habe ein recht frisches Ubuntu und einen Canoni850 an einem Printerport hängen.
Bisher (unter Debian) kann ich ihn ganz leicht mit Turboprint einrichten und mit lp@192.168.0.1 drucken - das geht jetzt nicht mehr.
Laut Turboprint sendet er zwar alles, kurz bevor er jedoch fertig ist bleibt der drucker stehen und der auftrag verleibt in der Warteschlange.(das bemerken auch die KDE bzw. Gnome-Programme )
In /var/cups/error_log steht:
PID 11390 stopped with status 1!
Wenn ich das debugging anmache steht folgendes (ich habe nur das gepostet, was mir wichtig erschien)
D [10/Jul/2005:03:15:10 +0200] [Job 10] Connected on ports 515 (local 1023)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command 02 lp
D [10/Jul/2005:03:15:10 +0200] [Job 10] Sending command string (4 bytes)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] Reading command status...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command returning 0
D [10/Jul/2005:03:15:10 +0200] [Job 10] Control file is:
D [10/Jul/2005:03:15:10 +0200] [Job 10] Hfarion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Proot
D [10/Jul/2005:03:15:10 +0200] [Job 10] Jtp12843_1_tmp
D [10/Jul/2005:03:15:10 +0200] [Job 10] ldfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] UdfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Ntp12843_1_tmp
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command 02 72 cfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Sending command string (17 bytes)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] Reading command status...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command returning 0
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command 03 1124096 dfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Sending command string (22 bytes)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] Reading command status...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command returning -1
E [10/Jul/2005:03:15:10 +0200] PID 16789 stopped with status 1!
D [10/Jul/2005:03:15:10 +0200] UpdateJob: job 10, file 0 is complete.
D [10/Jul/2005:03:15:10 +0200] StopJob: id = 10, force = 0
I [10/Jul/2005:03:15:10 +0200] Saving printers.conf...
D [10/Jul/2005:03:15:10 +0200] StopJob: printer state is 5
D [10/Jul/2005:03:15:13 +0200] AcceptClient: 5 from localhost:631.
D [10/Jul/2005:03:15:13 +0200] ReadClient: 5 POST / HTTP/1.1
D [10/Jul/2005:03:15:13 +0200] ProcessIPPRequest: 5 status_code=1
D [10/Jul/2005:03:15:13 +0200] ReadClient: 5 POST / HTTP/1.1
D [10/Jul/2005:03:15:13 +0200] ProcessIPPRequest: 5 status_code=1
D [10/Jul/2005:03:15:13 +0200] AcceptClient: 7 from localhost:631.
D [10/Jul/2005:03:15:13 +0200] CloseClient: 5
Ich habe auch schon die CUPS-Pakete von Debian ausprobiert, damit habe ich denselben Fehler.
Ich hoffe, das reicht für eine Diagnose, wenn ich noch mehr Angaben machen soll, fragt einfach danach.
Gruss Farion
Also ich habe ein recht frisches Ubuntu und einen Canoni850 an einem Printerport hängen.
Bisher (unter Debian) kann ich ihn ganz leicht mit Turboprint einrichten und mit lp@192.168.0.1 drucken - das geht jetzt nicht mehr.
Laut Turboprint sendet er zwar alles, kurz bevor er jedoch fertig ist bleibt der drucker stehen und der auftrag verleibt in der Warteschlange.(das bemerken auch die KDE bzw. Gnome-Programme )
In /var/cups/error_log steht:
PID 11390 stopped with status 1!
Wenn ich das debugging anmache steht folgendes (ich habe nur das gepostet, was mir wichtig erschien)
D [10/Jul/2005:03:15:10 +0200] [Job 10] Connected on ports 515 (local 1023)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command 02 lp
D [10/Jul/2005:03:15:10 +0200] [Job 10] Sending command string (4 bytes)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] Reading command status...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command returning 0
D [10/Jul/2005:03:15:10 +0200] [Job 10] Control file is:
D [10/Jul/2005:03:15:10 +0200] [Job 10] Hfarion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Proot
D [10/Jul/2005:03:15:10 +0200] [Job 10] Jtp12843_1_tmp
D [10/Jul/2005:03:15:10 +0200] [Job 10] ldfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] UdfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Ntp12843_1_tmp
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command 02 72 cfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Sending command string (17 bytes)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] Reading command status...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command returning 0
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command 03 1124096 dfA789farion
D [10/Jul/2005:03:15:10 +0200] [Job 10] Sending command string (22 bytes)...
D [10/Jul/2005:03:15:10 +0200] [Job 10] Reading command status...
D [10/Jul/2005:03:15:10 +0200] [Job 10] lpd_command returning -1
E [10/Jul/2005:03:15:10 +0200] PID 16789 stopped with status 1!
D [10/Jul/2005:03:15:10 +0200] UpdateJob: job 10, file 0 is complete.
D [10/Jul/2005:03:15:10 +0200] StopJob: id = 10, force = 0
I [10/Jul/2005:03:15:10 +0200] Saving printers.conf...
D [10/Jul/2005:03:15:10 +0200] StopJob: printer state is 5
D [10/Jul/2005:03:15:13 +0200] AcceptClient: 5 from localhost:631.
D [10/Jul/2005:03:15:13 +0200] ReadClient: 5 POST / HTTP/1.1
D [10/Jul/2005:03:15:13 +0200] ProcessIPPRequest: 5 status_code=1
D [10/Jul/2005:03:15:13 +0200] ReadClient: 5 POST / HTTP/1.1
D [10/Jul/2005:03:15:13 +0200] ProcessIPPRequest: 5 status_code=1
D [10/Jul/2005:03:15:13 +0200] AcceptClient: 7 from localhost:631.
D [10/Jul/2005:03:15:13 +0200] CloseClient: 5
Ich habe auch schon die CUPS-Pakete von Debian ausprobiert, damit habe ich denselben Fehler.
Ich hoffe, das reicht für eine Diagnose, wenn ich noch mehr Angaben machen soll, fragt einfach danach.
Gruss Farion