PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Problem beim aufsetzen eines Webservers



raptor.666
30.06.05, 11:35
Hallo zusammen

Ich habe ein kleines/großes Problem mit meinem Webserver.
Ich möchte einen Webserver fürs Intranet aufsetzen.
Den Virtuellen Server habe ich über das Tool webmin für Linux eingerichtet.
Der Apache Server läuft. Wenn ich nun auf den virtuellen Server zugereifen möchten,
welcher erstmal zu testezwecken "linux" heißt, bekomme ich immer nur die Seite vom
Apache Server zurück, jedoch nicht die Seite, die ich haben will.
Hat jemand von euch ne Idee was ich noch einstellen muss.



MFG Raptor.666

marce
30.06.05, 12:16
die _richtige_ Konfiguration?

ein paar mehr Infos wäre nicht schlecht...


(httpd.conf ist ein guter Ansatz, was Du genau wie haben willst ein anderer)

raptor.666
30.06.05, 12:25
hi


Hier ist erstmla meine httpd.conf:




### Main Configuration Section
### You really shouldn't change these settings unless you're a guru
###
ServerType standalone
ServerRoot /etc/httpd
#ServerName localhost
#LockFile /etc/httpd/httpd.lock
PidFile /var/run/httpd.pid
ScoreBoardFile /etc/httpd/httpd.scoreboard
ErrorLog logs/error_log
LogLevel warn
ResourceConfig /dev/null
AccessConfig /dev/null
DocumentRoot /var/www/html


### Dynamic Shared Object (DSO) Support
###
###
#LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule env_module modules/mod_env.so
LoadModule config_log_module modules/mod_log_config.so
LoadModule agent_log_module modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module modules/mod_status.so
LoadModule info_module modules/mod_info.so
LoadModule includes_module modules/mod_include.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule asis_module modules/mod_asis.so
LoadModule imap_module modules/mod_imap.so
LoadModule action_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule proxy_module modules/libproxy.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule anon_auth_module modules/mod_auth_anon.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
#LoadModule db_auth_module modules/mod_auth_db.so
LoadModule digest_module modules/mod_digest.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule example_module modules/mod_example.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
<IfDefine HAVE_SSL>
LoadModule ssl_module extramodules/libssl.so
</IfDefine>
<IfDefine HAVE_SXNET>
LoadModule sxnet_module extramodules/mod_sxnet.so
</IfDefine>
LoadModule vhost_alias_module modules/mod_vhost_alias.so

# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_proxy.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
#AddModule mod_auth_dbm.c
#AddModule mod_auth_db.c
AddModule mod_digest.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
<IfDefine HAVE_SSL>
AddModule mod_ssl.c
</IfDefine>
<IfDefine HAVE_SXNET>
AddModule mod_sxnet.c
</IfDefine>
AddModule mod_vhost_alias.c

###
### Global Configuration
###
# We now support multiple apache configurations on the same server. In
# common.conf, we put all directives that are common to all implementations
# (httpd, httpd-perl, etc.)
Include conf/commonhttpd.conf


###
### IP Address/Port and Proxied configuration section
###
# The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
# are using a proxy or accelerator, like the Apache-SGI or khttpd, so that
# the fast web server serves static content while Apache handles the
# cgi or php files

#BindAddress *
<IfDefine APACHEPROXIED>
Port 8080
Listen 8080
</IfDefine>
<IfDefine !APACHEPROXIED>
Port 80
Listen 80
</IfDefine>

# Likewise, we can set apache as the server by default and send perl
# requests via ProxyPass to apache-mod_perl. It increases performance
# since the perl interpreter is only used for perl and the standard apache
# does all the html and image files, with a smaller footprint.
#
# If you install apache and apache-mod_perl, this is the default config.
# If you don't want two web servers to use perl, uninstall apache, and
# apache-mod_perl will not be proxied.

<IfDefine PERLPROXIED>
RewriteEngine on
RewriteRule ^proxy:.* - [F]
RewriteRule ^(.*\/perl\/.*)$ http://%{HTTP_HOST}:8200$1 [P]
RewriteRule ^(.*\/cgi-perl\/.*)$ http://%{HTTP_HOST}:8200$1 [P]
</IfDefine>

###
### Log configuration Section
###

#Single logfile with access, agent and referer information
#This is the default, if vlogs are not defined for the main server
CustomLog logs/access_log combined env=!VLOG
#If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG


###
### Virtual Hosts
###
# We include different templates for Virtual Hosting. Have a look in the
# vhosts directory and modify to suit your needs.
Include conf/vhosts/Vhosts.conf
#Include conf/vhosts/DynamicVhosts.conf
#Include conf/vhosts/VirtualHomePages.conf


###
### Performance settings Section
###
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#
MinSpareServers 4
MaxSpareServers 10

#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#
StartServers 4

#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 500

Include conf/ssl/mod_ssl.conf
Include conf/ssl/ssl.default-vhost.conf

<VirtualHost *:*>
DocumentRoot /home/mario/apache/webroot
ServerName linux
<Directory "/home/mario/apache/webroot">
allow from all
Options +Indexes
</Directory>
</VirtualHost>


Ich bearbeite die Einstellungen nur mit dem WEbmin Tool.
Ich habe es gestern schonmal zum laufen gehabt, habe dann aber irgend ne Einstellung geändert, und danach ging gar nix mehr. NUn hab ich alles neu aufgesetzt und versuche den Webserver zum laufen zu bekommen, was mir aber net wirklich gelingt. Die Testseite vom Apachen ruft er ja auf, nur leider net das was ich haben will :(

MFG Raptor.666

Tomek
30.06.05, 12:55
Vorab: Lies bitte, wie man hier richtig postet (http://www.linuxforen.de/forums/showthread.php?t=164474) und passe deinen Beitrag entsprechend an. Danke.

Hast du auch schon mal in den Server und Client HowTos (http://www.linuxforen.de/forums/showthread.php?t=169531) geguckt und auch die Apache Dokumentation (http://httpd.apache.org/docs-2.0/) gelesen? Wenn nicht, dann bitte nachholen.

Blackcollar
30.06.05, 21:38
Passe deinen Post mal an...

Ansonsten... wo liegt denn deine Datei ??


DocumentRoot1 /var/www/html

oder

DocumentRoot2 /home/mario/apache/webroot

?