PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Probleme mit "Wine, Suse9.3, Ati 9700"



celine
05.06.05, 15:29
ich würde gerne wissen ob es jemand gibt der suse9.3 sowie wine in Verbindung mit einer ati9700pro zum laufen bekommen hat.
ich benutze die fglrx treiber vom suse ftp diese sind einwandfrei installiert.
leider stürzt mir beim start von wine immer der rechner ab (blacksreen)
was kann das sein ?

Catonga
05.06.05, 17:11
ich würde gerne wissen ob es jemand gibt der suse9.3 sowie wine in Verbindung mit einer ati9700pro zum laufen bekommen hat.
ich benutze die fglrx treiber vom suse ftp diese sind einwandfrei installiert.
leider stürzt mir beim start von wine immer der rechner ab (blacksreen)
was kann das sein ?

Ein kleiner Tipp:

Starte Wine mal mit folgendem Befehl:

wine PROGRAMMNAME.EXE >& log.txt

Wenn du jetzt rebooten solltest, dann sollte die Fehlerausgabe von Wine in der Datei log.txt stehen. PROGRAMMNAME.EXE solltest du natürlich durch deine EXE Datei von dem Programm das du starten willst ersetzen.

Die log.exe Datei kannst du dann hier posten.


Ansonsten sind noch folgende Log Dateien interessant:

/var/log/Xorg.0.log bzw. Xorg.1.log (da ja der Rechner neu gebootet wurde)
/var/log/messages
/var/log/syslog
/var/log/debug

Die solltest du dir auch mal anschauen ob da etwas brauchbares drinsteht.
Bei der Grafik könnte vor allem Xorg.* interessant sein.

celine
05.06.05, 19:35
hier meine log.txt

err:module:import_dll Library MFC42.DLL (which is needed by L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE") not found
err:module:LdrInitializeThunk Main exe initialization for L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE" failed, status c0000135

meine /var/log/messages macht mich leider auch nicht schlauer :(

Fatty
05.06.05, 19:48
Hast du auch mal versucht den X-Server mit CTRL+ALT+BACKSPACE neuzustarten oder auf eine Konsole zu wechseln? Wenn der Bildschirm schwarz bleibt heißt das noch lange nicht, dass der Rechner abgestürzt ist!

Wenn dich die Ausgabe von /var/log/messages nicht schlauer macht könntest du die Ausgabe trotzdem mal hier posten, damit wir uns unser eigenes Urteil darüber bilden können.

Hast du auch mal versucht ein anderes Programm zu starten? Vielleicht ist ja genau DAS EINE gar nicht lauffähig.

BTW: Welche Wine-Version verwendest du überhaupt? Hast du die selber kompiliert oder ein Paket installiert?

celine
05.06.05, 20:42
Hast du auch mal versucht den X-Server mit CTRL+ALT+BACKSPACE neuzustarten oder auf eine Konsole zu wechseln? Wenn der Bildschirm schwarz bleibt heißt das noch lange nicht, dass der Rechner abgestürzt ist!


ja habe ich aber ohne erfolg....

hier ein teil meiner messages



Jun 5 19:20:49 linux gconfd (mathias-7146): Beende
Jun 5 19:20:49 linux init: Switching to runlevel: 6
Jun 5 19:20:56 linux kernel: bootsplash: status on console 0 changed to on
Jun 5 19:20:56 linux kernel: bootsplash: status on console 0 changed to on
Jun 5 19:20:56 linux kernel: bootsplash: status on console 0 changed to on
Jun 5 19:20:58 linux sshd[6666]: Received signal 15; terminating.
Jun 5 19:20:58 linux smpppd[6641]: terminating on signal 15
Jun 5 19:20:58 linux kernel: Kernel logging (proc) stopped.
Jun 5 19:20:58 linux kernel: Kernel log daemon terminating.
Jun 5 19:20:59 linux syslog-ng[3761]: syslog-ng version 1.6.5 going down
Jun 5 19:22:04 linux syslog-ng[2750]: syslog-ng version 1.6.5 starting
Jun 5 19:22:04 linux /etc/hotplug.d/pci/50-pci.hotplug[2835]: /sbin/hwup: line 77: ICH: command not found
Jun 5 19:22:08 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jun 5 19:22:08 linux syslog-ng[2750]: Changing permissions on special file /dev/xconsole
Jun 5 19:22:08 linux syslog-ng[2750]: Changing permissions on special file /dev/tty10
Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 12
Jun 5 19:22:08 linux kernel: PCI: setting IRQ 12 as level-triggered
Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 12 (level, low) -> IRQ 12
Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
Jun 5 19:22:08 linux kernel: intel8x0_measure_ac97_clock: measured 59751 usecs
Jun 5 19:22:08 linux kernel: intel8x0: clocking to 48000
Jun 5 19:22:08 linux kernel: Capability LSM initialized
Jun 5 19:22:08 linux kernel: ieee1394: Initialized config rom entry `ip1394'
Jun 5 19:22:08 linux kernel: ieee1394: raw1394: /dev/raw1394 device initialized
Jun 5 19:22:08 linux kernel: parport: PnPBIOS parport detected.
Jun 5 19:22:08 linux kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jun 5 19:22:08 linux kernel: lp0: using parport0 (interrupt-driven).
Jun 5 19:22:08 linux kernel: video1394: Installed video1394 module
Jun 5 19:22:08 linux kernel: bootsplash: status on console 0 changed to on
Jun 5 19:22:08 linux kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
Jun 5 19:22:08 linux kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
Jun 5 19:22:08 linux kernel: usbcore: registered new driver usbfs
Jun 5 19:22:08 linux kernel: usbcore: registered new driver hub
Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
Jun 5 19:22:08 linux kernel: PCI: setting IRQ 5 as level-triggered
Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 5 (level, low) -> IRQ 5
Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: irq 5, pci mem 0xe6000000
Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
Jun 5 19:22:08 linux kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: park 0
Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Jun 5 19:22:08 linux kernel: hub 1-0:1.0: USB hub found
Jun 5 19:22:08 linux kernel: hub 1-0:1.0: 6 ports detected
Jun 5 19:22:08 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jun 5 19:22:08 linux kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 10
Jun 5 19:22:08 linux kernel: PCI: setting IRQ 10 as level-triggered
Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: irq 10, pci mem 0xe6004000
Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2


Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: irq 10, pci mem 0xe6004000
Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Jun 5 19:22:08 linux kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31.
Jun 5 19:22:08 linux kernel: hub 2-0:1.0: USB hub found
Jun 5 19:22:08 linux kernel: hub 2-0:1.0: 3 ports detected
Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
Jun 5 19:22:08 linux kernel: PCI: setting IRQ 11 as level-triggered
Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11
Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.1: irq 11, pci mem 0xe6005000
Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
Jun 5 19:22:08 linux kernel: hub 1-0:1.0: over-current change on port 1
Jun 5 19:22:08 linux kernel: hub 3-0:1.0: USB hub found
Jun 5 19:22:08 linux kernel: hub 3-0:1.0: 3 ports detected
Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
Jun 5 19:22:08 linux kernel: eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0
Jun 5 19:22:08 linux kernel: agpgart: Detected NVIDIA nForce2 chipset
Jun 5 19:22:08 linux kernel: agpgart: Maximum main memory to use for agp memory: 690M
Jun 5 19:22:08 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Jun 5 19:22:08 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Jun 5 19:22:08 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Jun 5 19:22:10 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Jun 5 19:22:12 linux mDNSResponder: Unable to parse DNS server list. Unicast DNS-SD unavailable
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4637]: new block device /block/ram1
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4649]: new block device /block/ram0
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4682]: new block device /block/ram9
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4698]: new block device /block/ram10
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4742]: new block device /block/ram5
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4724]: new block device /block/ram12
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4714]: new block device /block/ram11
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4800]: new block device /block/ram7
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4679]: new block device /block/ram4
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4732]: new block device /block/ram13
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4836]: new block device /block/loop2
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4852]: new block device /block/loop3
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4661]: new block device /block/ram2
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4899]: new block device /block/ram14
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4924]: new block device /block/ram8
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4940]: new block device /block/ram15
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4956]: new block device /block/loop0
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4970]: new block device /block/ram6
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4970]: message send failed: Resource temporarily unavailable
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4984]: new block device /block/loop7
Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4984]: message send failed: Resource temporarily unavailable
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4671]: new block device /block/ram3
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4888]: new block device /block/loop6
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4888]: message send failed: Resource temporarily unavailable
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4879]: new block device /block/loop5
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4879]: message send failed: Resource temporarily unavailable
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: new block device /block/loop4
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: message send failed: Resource temporarily unavaila


Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: new block device /block/loop4
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: message send failed: Resource temporarily unavailable
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[5079]: new block device /block/loop1
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[5079]: message send failed: Resource temporarily unavailable
Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[5267]: new block device /block/fd0
Jun 5 19:22:13 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Jun 5 19:22:14 linux /etc/hotplug.d/block/50-hwscan.hotplug[5602]: new block device /block/hdc
Jun 5 19:22:15 linux /etc/hotplug.d/block/50-hwscan.hotplug[5642]: new block device /block/hdd
Jun 5 19:22:15 linux /etc/hotplug.d/block/50-hwscan.hotplug[5639]: new block device /block/hda
Jun 5 19:22:16 linux kernel: cdrom: open failed.
Jun 5 19:22:16 linux kernel: cdrom: open failed.
Jun 5 19:22:16 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Jun 5 19:22:16 linux kernel: hub 1-0:1.0: over-current change on port 2
Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[5962]: new block device /block/hda/hda4
Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[5975]: new block device /block/hda/hda5
Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[5988]: new block device /block/hda/hda6
Jun 5 19:22:18 linux kernel: SCSI subsystem initialized
Jun 5 19:22:18 linux kernel: st: Version 20041025, fixed bufsize 32768, s/g segs 256
Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[6087]: new block device /block/hda/hda3
Jun 5 19:22:19 linux /etc/hotplug.d/block/50-hwscan.hotplug[6116]: new block device /block/hda/hda2
Jun 5 19:22:19 linux /etc/hotplug.d/block/50-hwscan.hotplug[6103]: new block device /block/hda/hda1
Jun 5 19:22:20 linux kernel: NET: Registered protocol family 10
Jun 5 19:22:20 linux kernel: Disabled Privacy Extensions on device c033d600(lo)
Jun 5 19:22:20 linux kernel: IPv6 over IPv4 tunneling driver
Jun 5 19:22:20 linux kernel: Disabled Privacy Extensions on device ee8c3800(sit0)
Jun 5 19:22:20 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jun 5 19:22:21 linux hp: unable to open /var/run/hpiod.port: No such file or directory
Jun 5 19:22:23 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jun 5 19:22:23 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
Jun 5 19:22:23 linux /usr/sbin/cron[6419]: (CRON) STARTUP (V5.0)
Jun 5 19:22:24 linux kernel: Non-volatile memory driver v1.2
Jun 5 19:22:24 linux kernel: end_request: I/O error, dev fd0, sector 0
Jun 5 19:22:24 linux kernel: end_request: I/O error, dev fd0, sector 0
Jun 5 19:22:25 linux kernel: fglrx: no version for "struct_module" found: kernel tainted.
Jun 5 19:22:25 linux kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jun 5 19:22:25 linux kernel: [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
Jun 5 19:22:25 linux kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
Jun 5 19:22:25 linux kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 10 (level, low) -> IRQ 10
Jun 5 19:22:25 linux kernel: [fglrx] module loaded - fglrx 8.12.10 [Apr 4 2005] on minor 0
Jun 5 19:22:25 linux kernel: mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
Jun 5 19:22:25 linux kernel: [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
Jun 5 19:22:25 linux kernel: [fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
Jun 5 19:22:25 linux kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jun 5 19:22:25 linux kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jun 5 19:22:25 linux kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
Jun 5 19:22:25 linux kernel: [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
Jun 5 19:22:25 linux kernel: [fglrx] free AGP = 54800384
Jun 5 19:22:25 linux kernel: [fglrx] max AGP = 54800384
Jun 5 19:22:25 linux kernel: [fglrx] free LFB = 116387840
Jun 5 19:22:25 linux kernel: [fglrx] max LFB = 116387840
Jun 5 19:22:25 linux kernel: [fglrx] free Inv = 0
Jun 5 19:22:25 linux kernel: [fglrx] max Inv = 0
Jun 5 19:22:25 linux kernel: [fglrx] total Inv = 0
Jun 5 19:22:25 linux kernel: [fglrx] total TIM = 0




Jun 5 19:22:25 linux kernel: [fglrx] total Inv = 0
Jun 5 19:22:25 linux kernel: [fglrx] total TIM = 0
Jun 5 19:22:25 linux kernel: [fglrx] total FB = 0
Jun 5 19:22:25 linux kernel: [fglrx] total AGP = 16384
Jun 5 19:22:25 linux ifup: No configuration found for sit0
Jun 5 19:22:26 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jun 5 19:22:26 linux kernel: bootsplash: status on console 0 changed to on
Jun 5 19:22:27 linux smpppd[6583]: smpppd version 1.58 started
Jun 5 19:22:27 linux sshd[6652]: Server listening on :: port 22.
Jun 5 19:22:27 linux kernel: ACPI: Power Button (FF) [PWRF]
Jun 5 19:22:27 linux kernel: ACPI: Fan [FAN] (on)
Jun 5 19:22:28 linux kernel: ACPI: Thermal Zone [THRM] (46 C)
Jun 5 19:22:28 linux kdm: :0[6302]: pam_unix2: session started for user mathias, service xdm-np
Jun 5 19:22:28 linux kernel: powernow-k8: Processor cpuid 6a0 not supported
Jun 5 19:22:28 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
Jun 5 19:22:28 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
Jun 5 19:22:28 linux kernel: bootsplash: status on console 0 changed to on
Jun 5 19:22:29 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jun 5 19:22:29 linux kernel: hub 1-0:1.0: over-current change on port 3
Jun 5 19:22:29 linux kernel: hub 1-0:1.0: over-current change on port 4
Jun 5 19:22:30 linux kernel: eth0: no IPv6 routers present
Jun 5 19:22:32 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
Jun 5 19:22:35 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
Jun 5 19:22:38 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
Jun 5 19:22:41 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
Jun 5 19:22:41 linux kernel: hub 1-0:1.0: over-current change on port 5
Jun 5 19:22:44 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jun 5 19:22:47 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jun 5 19:22:49 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jun 5 19:22:52 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jun 5 19:22:52 linux kernel: hub 1-0:1.0: over-current change on port 6
Jun 5 19:22:55 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jun 5 19:22:58 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jun 5 19:23:01 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jun 5 19:23:04 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jun 5 19:23:04 linux kernel: usbcore: registered new driver usbserial_generic
Jun 5 19:23:04 linux kernel: ohci_hcd 0000:00:02.1: wakeup
Jun 5 19:23:04 linux kernel: usbcore: registered new driver usbserial
Jun 5 19:23:04 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Jun 5 19:23:04 linux kernel: usb 3-1: new low speed USB device using ohci_hcd and address 2
Jun 5 19:23:07 linux kernel: usbcore: registered new driver hiddev
Jun 5 19:23:07 linux kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1
Jun 5 19:23:07 linux kernel: usbcore: registered new driver usbhid
Jun 5 19:23:07 linux kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Jun 5 19:23:14 linux kernel: subfs 0.9
Jun 5 19:23:14 linux hal-subfs-mount[7099]: registered at resmgrd and called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec /dev/fd0 "/media/floppy"
Jun 5 19:23:14 linux kernel: end_request: I/O error, dev fd0, sector 0
Jun 5 19:23:24 linux gconfd (mathias-7137): (Version 2.10.0) wird gestartet, Prozesskennung 7137, Benutzer »mathias«
Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readwrite:/home/mathias/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst



Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readwrite:/home/mathias/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Jun 5 19:23:59 linux pppd[7148]: Plugin rp-pppoe.so loaded.
Jun 5 19:23:59 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Jun 5 19:23:59 linux kernel: PPP generic driver version 2.4.2
Jun 5 19:23:59 linux pppd[7148]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3
Jun 5 19:23:59 linux pppd[7148]: Plugin passwordfd.so loaded.
Jun 5 19:23:59 linux kernel: NET: Registered protocol family 17
Jun 5 19:23:59 linux pppd[7148]: pppd 2.4.3 started by root, uid 0
Jun 5 19:24:00 linux pppd[7148]: PPP session is 31540
Jun 5 19:24:00 linux kernel: NET: Registered protocol family 24
Jun 5 19:24:00 linux pppd[7148]: Renamed interface ppp0 to dsl0
Jun 5 19:24:00 linux pppd[7148]: Using interface dsl0
Jun 5 19:24:00 linux pppd[7148]: Connect: dsl0 <--> eth0
Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MTU to 1500
Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MRU to 1500
Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MTU to 1500
Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MRU to 1500
Jun 5 19:24:01 linux pppd[7148]: PAP authentication succeeded
Jun 5 19:24:01 linux pppd[7148]: peer from calling number 00:09:B6:8F:0B:1B authorized
Jun 5 19:24:01 linux pppd[7148]: local IP address 213.54.207.42
Jun 5 19:24:01 linux pppd[7148]: remote IP address 62.26.136.17
Jun 5 19:24:01 linux pppd[7148]: primary DNS address 195.247.247.195
Jun 5 19:24:01 linux pppd[7148]: secondary DNS address 62.27.27.62
Jun 5 19:24:02 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Jun 5 19:24:02 linux ip-up: /sbin/modify_resolvconf: line 245: /etc/init.d/lwresd: No such file or directory
Jun 5 19:24:02 linux ip-up:
Jun 5 19:24:02 linux pppd[7148]: Script /etc/ppp/ip-up finished (pid 7178), status = 0x0
Jun 5 19:24:07 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Jun 5 19:24:15 linux hal.hotplug[7240]: timout(10000 ms) waiting for /class/net/ppp0
Jun 5 19:30:04 linux su: (to root) mathias on /dev/pts/1
Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
Jun 5 19:33:46 linux submountd: mount failure, No such device or address
Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
Jun 5 19:33:46 linux kernel: subfs: unsuccessful attempt to mount media (256)
Jun 5 19:42:39 linux su: (to root) mathias on /dev/pts/2

[/SIZE]

Catonga
05.06.05, 22:17
hier meine log.txt

err:module:import_dll Library MFC42.DLL (which is needed by L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE") not found
err:module:LdrInitializeThunk Main exe initialization for L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE" failed, status c0000135

meine /var/log/messages macht mich leider auch nicht schlauer :(


Du benötigst die MFC42.DLL Datei der Microsoft Foundation Classes.
Installier die am besten in dein drive_c/windows/system/ Verzeichnis und versuche danach
das Programm noch einmal zu starten.
Eventuell benötigst du auch einen Registry Eintrag in der ~/.wine/system.reg Datei für diese DLL, genaugenommen ab etwa diesem Abschnitt:
[Software\\Microsoft\\Windows\\CurrentVersion\\Shar edDLLs]


Im schlechtesten Fall kommt jetzt eine ganz andere Fehlermeldung, die könntest du dann ebenfalls posten.

tschloss
05.06.05, 23:04
Ich habe mir den neusten Treiber von ATI runtergeladen. Seither geht´s. (Ich hab ne 9800SE/256)

celine
05.06.05, 23:17
Ich habe mir den neusten Treiber von ATI runtergeladen. Seither geht´s. (Ich hab ne 9800SE/256)

mit wine oder nur mit linux games?

nachdem ich die dll ins system kopiert habe ist wie erwartet eine neuer fehler aufgetreten.
hier meine log.txt:

fixme:richedit:RichEditANSIWndProc WM_SETFONT: stub

tschloss
06.06.05, 09:04
mit wine oder nur mit linux games?

nachdem ich die dll ins system kopiert habe ist wie erwartet eine neuer fehler aufgetreten.
hier meine log.txt:

fixme:richedit:RichEditANSIWndProc WM_SETFONT: stub

Wine verwende ich nicht.

celine
06.06.05, 10:17
Wine verwende ich nicht.


nur darum geht es meine thema heist "Probleme mit "Wine, Suse9.3, ATI9700"

so funktioniert meine grafi auch!

Fatty
11.06.05, 02:05
Vielleicht solltest du mal Wine updaten und wie oben schon erwähnt die MFC42.dll nachinstallieren.

Ohne mehr Infos können wir dir leider auch nicht weiterhelfen!

sojourner
27.06.05, 11:16
Also ich habe das gleiche Problem. Eine Lösung habe ich auch nicht, aber mit folgendem "Trick" kann ich leben:

Wenn der Bildschirm nach dem Start von WINE schwarz wird, schalte ich mit <Strg>+<Alt>+<F10> auf eine andere Konsole und dann mit <Strg>+<Alt>+<F7> wieder zurück auf KDE. nach einer Gedenksekunde kommt dann das Bild wieder mit der aufgerufenenen Windows Software.

Vielleicht hilft's!