Bergtürke
11.05.05, 11:21
Servus Leute,
ich habe folgendes Problem. Immer wenn ich meinen Proxy Server herunterfahre bekomme ich folgende Fehlermeldung:
"unregister_netdevice: waiting for br0 to become free usage cout =1"
Sonst funktioniert die Schnittstelle einwandfrei!
Keine Ahnung woran das liegen koennte? Arbeite schon seit zwei Tagen an dem Problem. Komme einfach nicht weiter.
Ich habe folgende Konfiguration:
br0 Link encap:Ethernet HWaddr 00:00:21:D7:2E:32
inet addr:192.168.2.250 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::200:21ff:fed7:2e32/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1300 errors:0 dropped:0 overruns:0 frame:0
TX packets:1111 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:152296 (148.7 KiB) TX bytes:114729 (112.0 KiB)
eth0 Link encap:Ethernet HWaddr 00:10:5A:16:F4:A7
inet6 addr: fe80::210:5aff:fe16:f4a7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1302 errors:0 dropped:0 overruns:0 frame:0
TX packets:1115 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:170668 (166.6 KiB) TX bytes:115947 (113.2 KiB)
Interrupt:5 Base address:0xec40
eth1 Link encap:Ethernet HWaddr 00:00:21:D7:2E:32
inet6 addr: fe80::200:21ff:fed7:2e32/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:78 dropped:0 overruns:0 carrier:156
collisions:1326 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:6214 (6.0 KiB)
Interrupt:10 Base address:0xeca0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interface Configuration: /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
#mapping hotplug
# script grep
# map eth0
auto br0
iface br0 inet static
address 192.168.2.250
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
bridge_ports eth1 eth0
bridge_stp off
bridge_fd 2
bridge_maxwait 0
# pre-up ifconfig eth0 down
# pre-up ifconfig eth1 down
pre-up brctl addbr br0
pre-up brctl addif br0 eth0
pre-up brctl addif br0 eth1
pre-up ifconfig eth0 up
pre-up ifconfig eth1 up
post-down ifconfig eth0 down
post-down ifconfig eth1 down
post-down brctl delif br0 eth0
post-down brctl delif br0 eth1
post-down ifconfig br0 down
# post-down brctl delbr br0
Habe die neueste Ubuntu Server Version. Waere super, falls mir irgendjemand weiterhelfen koennte oder wenigstens einen Anhaltspunkt geben koennte woran es liegen kann.
ich habe folgendes Problem. Immer wenn ich meinen Proxy Server herunterfahre bekomme ich folgende Fehlermeldung:
"unregister_netdevice: waiting for br0 to become free usage cout =1"
Sonst funktioniert die Schnittstelle einwandfrei!
Keine Ahnung woran das liegen koennte? Arbeite schon seit zwei Tagen an dem Problem. Komme einfach nicht weiter.
Ich habe folgende Konfiguration:
br0 Link encap:Ethernet HWaddr 00:00:21:D7:2E:32
inet addr:192.168.2.250 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::200:21ff:fed7:2e32/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1300 errors:0 dropped:0 overruns:0 frame:0
TX packets:1111 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:152296 (148.7 KiB) TX bytes:114729 (112.0 KiB)
eth0 Link encap:Ethernet HWaddr 00:10:5A:16:F4:A7
inet6 addr: fe80::210:5aff:fe16:f4a7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1302 errors:0 dropped:0 overruns:0 frame:0
TX packets:1115 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:170668 (166.6 KiB) TX bytes:115947 (113.2 KiB)
Interrupt:5 Base address:0xec40
eth1 Link encap:Ethernet HWaddr 00:00:21:D7:2E:32
inet6 addr: fe80::200:21ff:fed7:2e32/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:78 dropped:0 overruns:0 carrier:156
collisions:1326 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:6214 (6.0 KiB)
Interrupt:10 Base address:0xeca0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interface Configuration: /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
#mapping hotplug
# script grep
# map eth0
auto br0
iface br0 inet static
address 192.168.2.250
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
bridge_ports eth1 eth0
bridge_stp off
bridge_fd 2
bridge_maxwait 0
# pre-up ifconfig eth0 down
# pre-up ifconfig eth1 down
pre-up brctl addbr br0
pre-up brctl addif br0 eth0
pre-up brctl addif br0 eth1
pre-up ifconfig eth0 up
pre-up ifconfig eth1 up
post-down ifconfig eth0 down
post-down ifconfig eth1 down
post-down brctl delif br0 eth0
post-down brctl delif br0 eth1
post-down ifconfig br0 down
# post-down brctl delbr br0
Habe die neueste Ubuntu Server Version. Waere super, falls mir irgendjemand weiterhelfen koennte oder wenigstens einen Anhaltspunkt geben koennte woran es liegen kann.