midi_
11.04.05, 17:58
Hallo
Ich hab ne Saitek Docking Station, die u.a. nen Seriellen Port hat, den ich gerne ansprechen möchte. Erkennen tut er so ziemlich alles, nur aus minicom an /dev/usb/tts/0 ist absolut nichts rauszubekommen. Hab nen gentoo-linux mit 2.6.11.5 kernel
Hat jemand ne Idee, was da noch schief läuft ??
# lsusb
Bus 005 Device 015: ID 067b:0000 Prolific Technology, Inc. PL2301 USB-USB BridgeBus 005 Device 014: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 005 Device 013: ID 0d3d:0001 Tangtop Technology Co., Ltd
Bus 005 Device 012: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port
Bus 005 Device 011: ID 05e3:0604 Genesys Logic, Inc.
Bus 005 Device 010: ID 1631:6200
Bus 005 Device 009: ID 0409:0058 NEC Corp. USB2.0 Hub Controller
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
dmesg
usb 5-5: new high speed USB device using ehci_hcd and address 9
hub 5-5:1.0: USB hub found
hub 5-5:1.0: 4 ports detected
usb 5-5.1: new high speed USB device using ehci_hcd and address 10
usb 5-5.2: new full speed USB device using ehci_hcd and address 11
hub 5-5.2:1.0: USB hub found
hub 5-5.2:1.0: 4 ports detected
usb 5-5.2.1: new full speed USB device using ehci_hcd and address 12
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 12 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
usb 5-5.2.2: new low speed USB device using ehci_hcd and address 13
input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.7-5.2.2
input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.7-5.2.2
usb 5-5.2.3: new full speed USB device using ehci_hcd and address 14
pl2303 5-5.2.3:1.0: PL-2303 converter detected
usb 5-5.2.3: PL-2303 converter now attached to ttyUSB0
usb 5-5.2.4: new full speed USB device using ehci_hcd and address 15
# tail /var/log/kernel/current
Apr 11 18:34:15 [kernel] hub 5-5.2:1.0: USB hub found
Apr 11 18:34:15 [kernel] hub 5-5.2:1.0: 4 ports detected
Apr 11 18:34:15 [kernel] usb 5-5.2.1: new full speed USB device using ehci_hcd and address 12
Apr 11 18:34:16 [kernel] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 12 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
Apr 11 18:34:16 [kernel] usb 5-5.2.2: new low speed USB device using ehci_hcd and address 13
Apr 11 18:34:16 [kernel] input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.7-5.2.2
Apr 11 18:34:16 [kernel] input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.7-5.2.2
Apr 11 18:34:16 [kernel] usb 5-5.2.3: new full speed USB device using ehci_hcd and address 14
Apr 11 18:34:17 [kernel] pl2303 5-5.2.3:1.0: PL-2303 converter detected
Apr 11 18:34:17 [kernel] usb 5-5.2.4: new full speed USB device using ehci_hcd and address 15
# ll /dev/usb/tts/
insgesamt 0
crw-rw---- 1 root usb 188, 0 1. Jan 1970 0
Ich hab ne Saitek Docking Station, die u.a. nen Seriellen Port hat, den ich gerne ansprechen möchte. Erkennen tut er so ziemlich alles, nur aus minicom an /dev/usb/tts/0 ist absolut nichts rauszubekommen. Hab nen gentoo-linux mit 2.6.11.5 kernel
Hat jemand ne Idee, was da noch schief läuft ??
# lsusb
Bus 005 Device 015: ID 067b:0000 Prolific Technology, Inc. PL2301 USB-USB BridgeBus 005 Device 014: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 005 Device 013: ID 0d3d:0001 Tangtop Technology Co., Ltd
Bus 005 Device 012: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port
Bus 005 Device 011: ID 05e3:0604 Genesys Logic, Inc.
Bus 005 Device 010: ID 1631:6200
Bus 005 Device 009: ID 0409:0058 NEC Corp. USB2.0 Hub Controller
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
dmesg
usb 5-5: new high speed USB device using ehci_hcd and address 9
hub 5-5:1.0: USB hub found
hub 5-5:1.0: 4 ports detected
usb 5-5.1: new high speed USB device using ehci_hcd and address 10
usb 5-5.2: new full speed USB device using ehci_hcd and address 11
hub 5-5.2:1.0: USB hub found
hub 5-5.2:1.0: 4 ports detected
usb 5-5.2.1: new full speed USB device using ehci_hcd and address 12
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 12 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
usb 5-5.2.2: new low speed USB device using ehci_hcd and address 13
input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.7-5.2.2
input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.7-5.2.2
usb 5-5.2.3: new full speed USB device using ehci_hcd and address 14
pl2303 5-5.2.3:1.0: PL-2303 converter detected
usb 5-5.2.3: PL-2303 converter now attached to ttyUSB0
usb 5-5.2.4: new full speed USB device using ehci_hcd and address 15
# tail /var/log/kernel/current
Apr 11 18:34:15 [kernel] hub 5-5.2:1.0: USB hub found
Apr 11 18:34:15 [kernel] hub 5-5.2:1.0: 4 ports detected
Apr 11 18:34:15 [kernel] usb 5-5.2.1: new full speed USB device using ehci_hcd and address 12
Apr 11 18:34:16 [kernel] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 12 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
Apr 11 18:34:16 [kernel] usb 5-5.2.2: new low speed USB device using ehci_hcd and address 13
Apr 11 18:34:16 [kernel] input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.7-5.2.2
Apr 11 18:34:16 [kernel] input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.7-5.2.2
Apr 11 18:34:16 [kernel] usb 5-5.2.3: new full speed USB device using ehci_hcd and address 14
Apr 11 18:34:17 [kernel] pl2303 5-5.2.3:1.0: PL-2303 converter detected
Apr 11 18:34:17 [kernel] usb 5-5.2.4: new full speed USB device using ehci_hcd and address 15
# ll /dev/usb/tts/
insgesamt 0
crw-rw---- 1 root usb 188, 0 1. Jan 1970 0