MarioR
07.01.05, 18:03
Hallo,
System: Trustix Linux 2.2
DHCP Server: 3.0.1
ich habe folgende Einstellungen in der /etc/dhcpd.conf
default-lease-time 600;
max-lease-time 600;
ddns-update-style none;
option domain-name "dududa.de";
option domain-name-servers 192.168.0.1, 212.237.149.225, 217.237.151.97;
option broadcast-address 192.168.0.255;
option routers 192.168.0.254;
option subnet-mask 255.255.255.0;
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.100 192.168.0.200;
}
wenn ich den server mit "dhcp start" starten will kommt folgende Ausgabe:
Internet Systems Consortium DHCP Server V3.0.1
Copyright 2004 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Wrote 0 leases to leases file.
No subnet declaration for start (0.0.0.0).
** Ignoring requests on start. If this is not what
you want, please write a subnet declaration
in your dhcpd.conf file for the network segment
to which interface start is attached. **
Not configured to listen on any interfaces!
If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.
If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.
Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.
exiting.
Was ist an der dhcpd.conf falsch ???
oder woran könnte es denn dann liegen ?
Gruß Mario
System: Trustix Linux 2.2
DHCP Server: 3.0.1
ich habe folgende Einstellungen in der /etc/dhcpd.conf
default-lease-time 600;
max-lease-time 600;
ddns-update-style none;
option domain-name "dududa.de";
option domain-name-servers 192.168.0.1, 212.237.149.225, 217.237.151.97;
option broadcast-address 192.168.0.255;
option routers 192.168.0.254;
option subnet-mask 255.255.255.0;
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.100 192.168.0.200;
}
wenn ich den server mit "dhcp start" starten will kommt folgende Ausgabe:
Internet Systems Consortium DHCP Server V3.0.1
Copyright 2004 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Wrote 0 leases to leases file.
No subnet declaration for start (0.0.0.0).
** Ignoring requests on start. If this is not what
you want, please write a subnet declaration
in your dhcpd.conf file for the network segment
to which interface start is attached. **
Not configured to listen on any interfaces!
If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.
If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.
Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.
exiting.
Was ist an der dhcpd.conf falsch ???
oder woran könnte es denn dann liegen ?
Gruß Mario