USB Anschlüsse funktionieren nicht

[immerda2004]

hallo zusammen, bin neuer Linux Anwender und habe 9.2 prof. installiert.
Jetzt werden alle USB Anschlüße nicht erkannt, kann weder drucken noch mit USB Stick arbeiten.
Zahle dem ,der mir wirkliche Hilfe bietet Geld für seine Hilfe, schickt mir eine Mail. Ich komme einfach nicht weiter und ich möchte es eigentlich nicht deinstallieren. Deshalb bitte meldet euch

[psy]

immer ruhig, du bekommst hier auch ohne zahlen von geld hilfe ;)

was sagt denn dmesg nach dem einstecken eines usb-gerätes, poste mal die bildschirmausgabe.

[immerda2004]

immer ruhig, du bekommst hier auch ohne zahlen von geld hilfe ;)

was sagt denn dmesg nach dem einstecken eines usb-gerätes, poste mal die bildschirmausgabe.
also, danke erst einmal, aber nach dsmg steht dort sehr viel, was genau mußt du wissen ?

[psy]

poste alles ;)

[immerda2004]

poste alles ;)
entschuldige, bitte wie geht das ?

[immerda2004]

entschuldige, bitte wie geht das ?
Linux version 2.6.8-24.10-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Dec 22 11:54:27 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
501MB vmalloc/ioremap area available.
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AWARD ) @ 0x000f7370
ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6900
ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 desktop elevator=as splash=0
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2606.571 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513996k/524224k available (2076k kernel code, 9584k reserved, 780k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5160.96 BogoMIPS (lpj=2580480)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1171k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *13
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1105109152.638:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 6144k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:5500
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35007 bytes,<6>...found (1024x768, 21643 bytes, v3).
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Using anticipatory io scheduler
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: ST340014A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-105, ATAPI CD/DVD-ROM drive
hdd: SONY DVD-ROM DDU1612, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdb: max request size: 1024KiB
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 < hdb5 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
alps.c: E6 report: 46 03 c8
input: PS2++ Logitech Wheel Mouse on isa0060/serio1
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda1
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M PS2K
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 1028120k swap on /dev/hda1. Priority:42 extents:1
reiserfs: enabling write barrier flush mode
usbcore: registered new driver usbfs
usbcore: registered new driver hub
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xbc00, IRQ 5, 00:10:dc:ee:c9:02.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
subfs 0.9
evdev_connect: evdev cdffc280 handle cdffc29c name event0
evdev_connect: evdev cdffc180 handle cdffc19c name event1
evdev_connect: evdev cdffde80 handle cdffde9c name event2
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 3 (level, low) -> IRQ 3
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3] MMIO=[e8120000-e81207ff] MaxPacket=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc001b9b61]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xd0000000
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 9, pci mem e105c000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb1: SerialNumber: 0000:00:03.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: irq 3, pci mem e1062000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb2: SerialNumber: 0000:00:03.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: irq 10, pci mem e1074000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb3: SerialNumber: 0000:00:03.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using address 2
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: irq 11, pci mem e1076000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.8-24.10-default ehci_hcd
usb usb4: SerialNumber: 0000:00:03.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-1: device descriptor read/all, error -110
ohci_hcd 0000:00:03.1: wakeup
usb 2-1: new full speed USB device using address 4
usb 2-1: Product: Medion Flash XL V2.7D
usb 2-1: Manufacturer: MEDION
usb 2-1: SerialNumber: 2002-78
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f760(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 336 bytes per conntrack
ip6_conntrack version 0.1 (4095 buckets, 32760 max) - 208 bytes per conntrack
hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Medion Model: Flash XL CF Rev: 2.7D
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Vendor: Medion Model: Flash XL MS Rev: 2.7D
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Attached scsi generic sg1 at scsi0, channel 0, id 0, lun 1, type 0
Vendor: Medion Model: Flash XL MMC/SD Rev: 2.7D
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
Attached scsi generic sg2 at scsi0, channel 0, id 0, lun 2, type 0
Vendor: Medion Model: Flash XL SM Rev: 2.7D
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3, type 0
USB Mass Storage device found at 4
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 17
Disabled Privacy Extensions on device de74c400(sit0)
eth0: Media Link On 100mbps full-duplex
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
eth0: no IPv6 routers present
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 9 (level, low) -> IRQ 9
intel8x0_measure_ac97_clock: measured 49685 usecs
intel8x0: clocking to 48000
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [FUTS]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (33 C)
powernow: This module only works with AMD K7 CPUs
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.12 loaded
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 5, latency: 32, mmio: 0xe8127000
saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
saa7134[0]: board init: gpio is 0
saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0]
tda9887: Ignoring new-style parameters in presence of obsolete ones
tda9885/6/7: chip found @ 0x86
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64654 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKFIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64655 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKPSH FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64656 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKPSH FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64657 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKPSH FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64658 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKPSH FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64660 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKPSH FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64661 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKPSH FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.11 DST=216.239.59.99 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=64662 DF PROTO=TCP SPT=1037 DPT=80 WINDOW=11200 RES=0x00 ACKPSH FIN URGP=0

[psy]

1. öffne eine konsole
2. geh in dein home-verzeichnis
3. gib folgendes ein

dmesg &> dmesg.txt

in deinem home-verzeichnis gibt es jetzt eine datei mit dem namen "dmesg.txt", diese hängst du einfach als anhang hier rein.

edit: oder so...

ciao
psy

[psy]

usb 2-1: new full speed USB device using address 4
usb 2-1: Product: Medion Flash XL V2.7D
usb 2-1: Manufacturer: MEDION
usb 2-1: SerialNumber: 2002-78

drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0


sieht doch soweit gut aus...
ich hab leider keine ahnung, ob dieses medion-gerät unterstützt wird und ob es treiber dafür gibt, aber such einfach mal bei www.google.de, was deinen usb-stick angeht, diesen musst du nach dem einstecken erst noch mounten.

man mount
in der konsole eingeben, dort ist alles weitere beschrieben.