wingman
19.11.04, 20:06
Hallo
Ich will Half Life 2 Gamen. Das ich das Gamen kann muss ich auf das CD Rom mit Cedega zugreifen können.
Das istr meine Cedega Config
Code:
[Drive N]
"Type" = "cdrom"
"Path" = "/mnt/dvd"
"Label" = "/mnt/dvd"
"FS" = "win95"
"Device" = "/dev/hdc"
Meine fstab
Code:
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext2 noauto,noatime 1 2
/dev/hda3 / ext3 noatime 0 1
/dev/hda2 none swap sw 0 0
/dev/hdb1 /2 ext3 noatime 0 1
/dev/cdroms/cdrom0 /mnt/cdrom auto noauto 0 0
/dev/hdc /mnt/dvd auto noauto 0 0
/dev/fd0 /mnt/floppy auto noauto 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:
none /dev/shm tmpfs defaults 0
Es greift einfach nicht auf das Cdrom drauf
Gruss Dave
Ich will Half Life 2 Gamen. Das ich das Gamen kann muss ich auf das CD Rom mit Cedega zugreifen können.
Das istr meine Cedega Config
Code:
[Drive N]
"Type" = "cdrom"
"Path" = "/mnt/dvd"
"Label" = "/mnt/dvd"
"FS" = "win95"
"Device" = "/dev/hdc"
Meine fstab
Code:
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext2 noauto,noatime 1 2
/dev/hda3 / ext3 noatime 0 1
/dev/hda2 none swap sw 0 0
/dev/hdb1 /2 ext3 noatime 0 1
/dev/cdroms/cdrom0 /mnt/cdrom auto noauto 0 0
/dev/hdc /mnt/dvd auto noauto 0 0
/dev/fd0 /mnt/floppy auto noauto 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:
none /dev/shm tmpfs defaults 0
Es greift einfach nicht auf das Cdrom drauf
Gruss Dave