djaliced
14.11.04, 13:06
Hallo Linuxerianer/innen,
wie im Titel schon beschrieben hab ich folgendes Problem.
Und zwar bin ich im besitzt eines Acer Extensa 3000 serie (3001wlmi) Laptop und versuche meinen Kartenleser zu installieren. (sd/mmc)
Ich weiß nicht ob es ein SCSI; USB oderr sonst irrgent einer ist.
Ich hab schon seit 2 Tagen gegoogelt aber keine passende lösung gefunden. Das einziege was ich noch dazu sagen kann das das Teil von Texas Instrument ist.
Ich hab hier mal die ausgabe von ?lspci? und ?dmesg? eingefügt...
Ach ja, ich benutze Suse 9.2. Falls ihr noch irrgent welche Angaben braucht sagt einfach bescheit....
gruß Olly
"lspci":
system-x-lap:~ # lspci
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 855GME GMCH Host-to-AGP Bridge (Virtual PCI-to-PCI) (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
0000:02:06.0 CardBus bridge: Texas Instruments: Unknown device 8031
0000:02:06.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032
0000:02:06.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033
"und hier dmesg":
system-x-lap:~ # dmesg
Linux version 2.6.8-24-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Oct 6 09:16:23 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
BIOS-e820: 000000001fee0000 - 000000001feec000 (ACPI data)
BIOS-e820: 000000001feec000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
503MB vmalloc/ioremap area available.
0MB HIGHMEM available.
510MB LOWMEM available.
On node 0 totalpages: 130784
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126688 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 ACER ) @ 0x000f62c0
ACPI: RSDT (v001 ACER Kestrel 0x20020707 LTP 0x00000000) @ 0x1fee6235
ACPI: FADT (v001 ACER Kestrel 0x20020707 PTL 0x00000050) @ 0x1feebf2c
ACPI: HPET (v001 ACER Kestrel 0x20020707 PTL 0x00000000) @ 0x1feebfa0
ACPI: BOOT (v001 ACER Kestrel 0x20020707 LTP 0x00000001) @ 0x1feebfd8
ACPI: DSDT (v001 ACER Kestrel 0x20020707 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda4 vga=0x317 selinux=0 resume=/dev/hda2 desktop elevator=as splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1498.718 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513356k/523136k available (2074k kernel code, 9156k reserved, 782k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2973.69 BogoMIPS (lpj=1486848)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 1133k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
ACPI: Embedded Controller [EC0] (gpe 29)
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:06.2[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:06.3[A] -> GSI 10 (level, low) -> IRQ 10
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1100435111.909:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:56e3
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35007 bytes,<6>...found (1024x768, 21643 bytes, v3).
Console: switching to colour frame buffer device 127x43
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 6 (level, low) -> IRQ 6
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS424040M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI DVDRW SDW-042, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> 4 multi-buttons, i.e. besides standard buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda2
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
GLAN MPCI T394 MDM0 USB1 USB2 USB3
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 24763 to 25343
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 4081 and revoked 110/124 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
EXT3 FS on hda4, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
subfs 0.9
evdev_connect: evdev cded0640 handle cded065c name event0
evdev_connect: evdev dfec4a40 handle dfec4a5c name event1
evdev_connect: evdev dfec4940 handle dfec495c name event2
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 6, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 6, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 6, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: over-current change on port 2
usb 2-1: new full speed USB device using address 2
hdc: ATAPI 47X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hw_random: RNG not detected
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem e083e000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.8-24-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-1: USB disconnect, address 2
ehci_hcd 0000:00:1d.7: fatal error
ehci_hcd 0000:00:1d.7: HC died; cleaning up
usb 2-1: new full speed USB device using address 3
Adding 1052248k swap on /dev/hda2. Priority:42 extents:1
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
b44.c:v0.94 (May 4, 2004)
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 6 (level, low) -> IRQ 6
eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:47:89:8e
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855GM Chipset.
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: AGP aperture is 256M @ 0xe0000000
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:02:06.0 (0104 -> 0106)
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:02:06.0 [1025:0064]
Yenta: ISA IRQ mask 0x08b8, PCI irq 10
Socket status: 30000006
spurious 8259A interrupt: IRQ7.
ieee80211_crypt: unsupported module, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: unsupported module, tainting kernel.
ipw2200: unsupported module, tainting kernel.
ipw2200: Intel(R) PRO/Wireless 2200 Network Driver, 0.8
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10
eth1: Setting MAC to 00:0e:35:4a:f7:2a
ipw2200: Calibration
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.7
usbcore: registered new driver hci_usb
Bluetooth: L2CAP ver 2.4
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.0
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:02:06.2[A] -> GSI 10 (level, low) -> IRQ 10
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00001e275b]
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: excluding 0x808-0x80f
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f6a0(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4087 buckets, 32696 max) - 336 bytes per conntrack
ip6_conntrack version 0.1 (4087 buckets, 32696 max) - 208 bytes per conntrack
ieee80211_crypt_wep: unsupported module, tainting kernel.
ieee80211_crypt: registered algorithm 'WEP'
smbfs: unsupported module, tainting kernel.
Disabled Privacy Extensions on device dc998c00(sit0)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49867 usecs
intel8x0: clocking to 48000
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
eth1: no IPv6 routers present
ACPI: Thermal Zone [THRM] (57 C)
Invalid control/status registers
speedstep-centrino: no table support for CPU model "Intel(R) Pentium(R) M processor 1.50GHz":
speedstep-centrino: try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled
powernow: This module only works with AMD K7 CPUs
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 1500 MHz, 24000 mW, 10 uS
cpufreq: P1: 1200 MHz, 20000 mW, 10 uS
cpufreq: P2: 1000 MHz, 18000 mW, 10 uS
cpufreq: P3: 800 MHz, 16000 mW, 10 uS
cpufreq: P4: 600 MHz, 12000 mW, 10 uS
Non-volatile memory driver v1.2
lp: driver loaded but no devices found
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
thinkpad: unsupported module, tainting kernel.
thinkpad: I have registered to handle major: 10 minor: 170.
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
evdev_connect: evdev cdfe7e80 handle cdfe7e9c name event3
Hier noch Technische-Daten zum Nodebook:
Prozessortyp Intel® Pentium M Prozessor 715
Prozessortechnologie Intel® Centrino? Mobiltechnologie
Taktfrequenz 1,5 GHz
FSB 400 MHz
L2 Cache 2048 KB
Displaygröße 15,4''
Auflösung intern 1280 x 800 Pixel (WXGA)
Auflösung extern 2048 x 1536 Pixel
Arbeitsspeicher 512 MB
Speicherart PC 2700 DDR-SDRAM
Speichertakt 333 MHz
Speichererweiterung max. 2048 MB
Festplattengröße 40 GB
Festplatten- geschwindigkeit 4200 U/Min
Grafikchip ATI® Mobility Radeon 9700
Grafikspeicher 64 MB DDR Video-RAM
DVD +/-R/RW Brenner ja (QSI-SDW-042)
Lesegeschwindigkeit 24 x 8x (CD/DVD)
Schreibgeschwindigkeit CD 16x 10x (CDR/CDRW)
Schreibgeschwindigkeit DVD 2,4x 2,4x 2x 2x (DVD+R/+RW/-R/-RW)
Soundchip AC 97
USB-Schnittstelle 3x 2.0
Firewire-Schnittstelle ja
Modemanschluss RJ-11 ja
Netzwerkanschluss RJ-45 ja
Kartenleser MMC, SD-Karte, Memory Stick
PC Card Slot 1x PCMCIA Typ II
Infrarot-Schnittstelle ja
VGA-Ausgang ja
TV-Ausgang S-Video
Wireless LAN 802.11g, bis zu 54 MBit/s
wie im Titel schon beschrieben hab ich folgendes Problem.
Und zwar bin ich im besitzt eines Acer Extensa 3000 serie (3001wlmi) Laptop und versuche meinen Kartenleser zu installieren. (sd/mmc)
Ich weiß nicht ob es ein SCSI; USB oderr sonst irrgent einer ist.
Ich hab schon seit 2 Tagen gegoogelt aber keine passende lösung gefunden. Das einziege was ich noch dazu sagen kann das das Teil von Texas Instrument ist.
Ich hab hier mal die ausgabe von ?lspci? und ?dmesg? eingefügt...
Ach ja, ich benutze Suse 9.2. Falls ihr noch irrgent welche Angaben braucht sagt einfach bescheit....
gruß Olly
"lspci":
system-x-lap:~ # lspci
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 855GME GMCH Host-to-AGP Bridge (Virtual PCI-to-PCI) (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
0000:02:06.0 CardBus bridge: Texas Instruments: Unknown device 8031
0000:02:06.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032
0000:02:06.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033
"und hier dmesg":
system-x-lap:~ # dmesg
Linux version 2.6.8-24-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Oct 6 09:16:23 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
BIOS-e820: 000000001fee0000 - 000000001feec000 (ACPI data)
BIOS-e820: 000000001feec000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
503MB vmalloc/ioremap area available.
0MB HIGHMEM available.
510MB LOWMEM available.
On node 0 totalpages: 130784
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126688 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 ACER ) @ 0x000f62c0
ACPI: RSDT (v001 ACER Kestrel 0x20020707 LTP 0x00000000) @ 0x1fee6235
ACPI: FADT (v001 ACER Kestrel 0x20020707 PTL 0x00000050) @ 0x1feebf2c
ACPI: HPET (v001 ACER Kestrel 0x20020707 PTL 0x00000000) @ 0x1feebfa0
ACPI: BOOT (v001 ACER Kestrel 0x20020707 LTP 0x00000001) @ 0x1feebfd8
ACPI: DSDT (v001 ACER Kestrel 0x20020707 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda4 vga=0x317 selinux=0 resume=/dev/hda2 desktop elevator=as splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1498.718 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513356k/523136k available (2074k kernel code, 9156k reserved, 782k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2973.69 BogoMIPS (lpj=1486848)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 1133k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
ACPI: Embedded Controller [EC0] (gpe 29)
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:06.2[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:06.3[A] -> GSI 10 (level, low) -> IRQ 10
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1100435111.909:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:56e3
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35007 bytes,<6>...found (1024x768, 21643 bytes, v3).
Console: switching to colour frame buffer device 127x43
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 6 (level, low) -> IRQ 6
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS424040M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI DVDRW SDW-042, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> 4 multi-buttons, i.e. besides standard buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda2
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
GLAN MPCI T394 MDM0 USB1 USB2 USB3
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 24763 to 25343
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 4081 and revoked 110/124 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
EXT3 FS on hda4, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
subfs 0.9
evdev_connect: evdev cded0640 handle cded065c name event0
evdev_connect: evdev dfec4a40 handle dfec4a5c name event1
evdev_connect: evdev dfec4940 handle dfec495c name event2
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 6, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 6, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 6, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: over-current change on port 2
usb 2-1: new full speed USB device using address 2
hdc: ATAPI 47X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hw_random: RNG not detected
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem e083e000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.8-24-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-1: USB disconnect, address 2
ehci_hcd 0000:00:1d.7: fatal error
ehci_hcd 0000:00:1d.7: HC died; cleaning up
usb 2-1: new full speed USB device using address 3
Adding 1052248k swap on /dev/hda2. Priority:42 extents:1
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
b44.c:v0.94 (May 4, 2004)
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 6 (level, low) -> IRQ 6
eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:47:89:8e
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855GM Chipset.
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: AGP aperture is 256M @ 0xe0000000
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:02:06.0 (0104 -> 0106)
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:02:06.0 [1025:0064]
Yenta: ISA IRQ mask 0x08b8, PCI irq 10
Socket status: 30000006
spurious 8259A interrupt: IRQ7.
ieee80211_crypt: unsupported module, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: unsupported module, tainting kernel.
ipw2200: unsupported module, tainting kernel.
ipw2200: Intel(R) PRO/Wireless 2200 Network Driver, 0.8
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10
eth1: Setting MAC to 00:0e:35:4a:f7:2a
ipw2200: Calibration
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.7
usbcore: registered new driver hci_usb
Bluetooth: L2CAP ver 2.4
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.0
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:02:06.2[A] -> GSI 10 (level, low) -> IRQ 10
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00001e275b]
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: excluding 0x808-0x80f
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f6a0(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4087 buckets, 32696 max) - 336 bytes per conntrack
ip6_conntrack version 0.1 (4087 buckets, 32696 max) - 208 bytes per conntrack
ieee80211_crypt_wep: unsupported module, tainting kernel.
ieee80211_crypt: registered algorithm 'WEP'
smbfs: unsupported module, tainting kernel.
Disabled Privacy Extensions on device dc998c00(sit0)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49867 usecs
intel8x0: clocking to 48000
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
eth1: no IPv6 routers present
ACPI: Thermal Zone [THRM] (57 C)
Invalid control/status registers
speedstep-centrino: no table support for CPU model "Intel(R) Pentium(R) M processor 1.50GHz":
speedstep-centrino: try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled
powernow: This module only works with AMD K7 CPUs
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 1500 MHz, 24000 mW, 10 uS
cpufreq: P1: 1200 MHz, 20000 mW, 10 uS
cpufreq: P2: 1000 MHz, 18000 mW, 10 uS
cpufreq: P3: 800 MHz, 16000 mW, 10 uS
cpufreq: P4: 600 MHz, 12000 mW, 10 uS
Non-volatile memory driver v1.2
lp: driver loaded but no devices found
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
thinkpad: unsupported module, tainting kernel.
thinkpad: I have registered to handle major: 10 minor: 170.
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
ipw2200: TODO: Roaming
evdev_connect: evdev cdfe7e80 handle cdfe7e9c name event3
Hier noch Technische-Daten zum Nodebook:
Prozessortyp Intel® Pentium M Prozessor 715
Prozessortechnologie Intel® Centrino? Mobiltechnologie
Taktfrequenz 1,5 GHz
FSB 400 MHz
L2 Cache 2048 KB
Displaygröße 15,4''
Auflösung intern 1280 x 800 Pixel (WXGA)
Auflösung extern 2048 x 1536 Pixel
Arbeitsspeicher 512 MB
Speicherart PC 2700 DDR-SDRAM
Speichertakt 333 MHz
Speichererweiterung max. 2048 MB
Festplattengröße 40 GB
Festplatten- geschwindigkeit 4200 U/Min
Grafikchip ATI® Mobility Radeon 9700
Grafikspeicher 64 MB DDR Video-RAM
DVD +/-R/RW Brenner ja (QSI-SDW-042)
Lesegeschwindigkeit 24 x 8x (CD/DVD)
Schreibgeschwindigkeit CD 16x 10x (CDR/CDRW)
Schreibgeschwindigkeit DVD 2,4x 2,4x 2x 2x (DVD+R/+RW/-R/-RW)
Soundchip AC 97
USB-Schnittstelle 3x 2.0
Firewire-Schnittstelle ja
Modemanschluss RJ-11 ja
Netzwerkanschluss RJ-45 ja
Kartenleser MMC, SD-Karte, Memory Stick
PC Card Slot 1x PCMCIA Typ II
Infrarot-Schnittstelle ja
VGA-Ausgang ja
TV-Ausgang S-Video
Wireless LAN 802.11g, bis zu 54 MBit/s