Alsa mit Kernel 2.6.8 und AudigyLS

[Sensenmann]

Heja,

ich habe ein paar Probleme mit ALSA... naja. Ich beschreibe erstmal die Schritte, die ich bis jetzt unternommen habe, dann kommen wir zum Zwichenstand.

Ich habe ein Gentoo 1.4.16 System mit 2.6.8-rc1 Kernel. Eine audigyLS und eine deaktivierte (Bios) Via-Soundkarte.

Als erstes habe ich den Kernel mit den Also Modulen integriert kopmpiliert, dann laut Anleitung emerge alsa-driver (utils...) gemacht. Dies funktionierte erstmal nicht, da die AudigyLS nicht richtig integriert war und da ich das am Anfang nicht wußte, kompilierte ich den Kernel und den "Emerge alsa-driver" in verschiedene Kombinationen aus.
Nun, ich bin auf folgenden Stand im Moment:
Kernel 2.6.8-rc1 kompiliert mit Soundunterstützung, ABER alsa nicht darin als Modul oder direkt integriert. Ich bin nun hingegangen und habe die 1.0.7rc1 von der Homepage geladen und dann nach der mitgelieferten FAQ/INSTALL Datei installiert.
Mit:


./configure --with-isapnp=no --with-sequencer=yes (extra ohne den Treiber zu spezialisieren, da es mit nicht funktionierte)
make
make install
./snddevices
modprobe snd-audigyls

Soweit funktionierte alles ok, bis auf den Modprobe, denn jetzt bekomme ich folgende Ausgabe:



modprobe snd-audigyls
WARNING: Error inserting snd (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd.ko): Input/output error
WARNING: Error inserting snd_timer (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_audigyls (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/emu10k1/snd-audigyls.ko): Unknown symbol in module, or unknown parameter (see dmesg)


Was nun?
Also ich weiß imo nicht mehr weiter, vielleicht betrachte ich es auch nicht weit genug. Gebt mir bitte mal ein paar Tipps.

Mfg
Sensen

[DerLipper[TuX]]

Hast du alle soundkarten treiber bei alsa gebaut? Hast du im Kernel Sound-Unterstützung angewählt?

[Sensenmann]

Ja, ich habe absichtlich alle Treiber bei Alsa gebaut

<*> Sound card support

Aktiviert, aber nicht den Alsa Teil

[mrsuicide]

1. Option: configure-Option --disable-verbose-printk verwenden
2. Villeicht hast du im Kernel auch noch ALSA drin. Hau alles ALSA aus dem Kernel raus...

[Sensenmann]

./configure --with-isapnp=no --with-sequencer=yes --disable-verbose-printk
...
make
...
make install
...
./snddevices
...
modprobe snd-audigyls
WARNING: Error inserting snd (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd.ko): Input/output error
WARNING: Error inserting snd_timer (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_audigyls (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/emu10k1/snd-audigyls.ko): Unknown symbol in module, or unknown parameter (see dmesg)


Im kernel ist nichts drinne vom alsa kernel

mfg
Sensen

[frankpr]

Die alsa Unterstützung muß nicht aus dem Kernel entfernt werden, auch wenn die Treiber noch einmal separat installiert werden. Habe ich noch nie gemacht und alles läuft hervorragend.
Da ich eine Audigy2 habe, frage ich mich, wieso Du ein anderes Modul als snd-emu10k1 nutzen willst. Meines Wissens (gut, man kann nicht alles wissen) ist der emu10k1 Treiber für alle SB Live! und Audigy(2) Karten zuständig.
Versuche mal alsaconf und entferne danach alle alten Einträge aus /etc/modprobe.conf und /etc/modules.d/alsa, die etwas mit Soundkarten zu tun haben.

MfG

[mrsuicide]

Ok, ok... poste doch mal die dmesg wenn es schon in der Fehlermeldung druafhinweist!

[Sensenmann]

*g*
in der dmsg steht nix drin o_O (leer)

@frankpr
Es werden die Karten, die du ansprichst, alle vom emu10k1 Treiber unterstützt AUSSER der AudigyLS und noch irgendeiner DELL Karte. Warum? Weil diese Karten einen anderen Chipsatz haben und auch keinen Hardwaremixer

von http://alsa.opensrc.org/index.php?page=audigyls



The driver for the Audigy LS is now included in alsa-driver 1.0.6a.
Download it from: http://www.alsa-project.org/
To build it, use:
./configure --with-cards=audigyls

The kernel module that is used is called "snd-audigyls"

WARNING: The Audigy LS is a very basic sound card. It has no hardware mixer, no DSP, and no interpolators.
(Well not totally true, but I have only just received the Datasheets under NDA, so how was I supposed to know before! I will be implementing support for some extra features now that I know about them, when I get a moment. For example: The sound card does in fact have interpolators.)

audigyls_capture -- Audigy LS Capture controls
audigyls_playback -- Audigy LS Playback controls

Development of the Audigy LS driver is done with a Model:SB0310.
We understand that an Audigy LS exists with Model:SB0312, and we would like to know what the differences are.
"lspci -vn" will help us.

More information regarding the Audigy LS driver that might be interesting to developers is available from:
http://www.alsa-project.org/~james/alsa-driver/

A good creative sound card identification list is here: http://us.creative.com/support/identifyproduct/

ALSA Mailing list discussion
http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg12892.html

This driver will be officially merged into ALSA 1.0.6 release.
Update: [ALSA 1.0.6a changelog].


Mfg
Sensen

[frankpr]

Aha, wie ich schon geschrieben habe, man kann nicht alles wissen.
Hast Du mal alsaconf ausgeführt?

MfG

[Sensenmann]

also alsaconf läuft ohne Fehler durch, aber nach einem neustart geht es immer noch nicht



odprobe snd-audigyls
WARNING: Error inserting snd (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd.ko): Input/output error
WARNING: Error inserting snd_timer (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (seedmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_audigyls (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/emu10k1/snd-audigyls.ko): Unknown symbol in module, or unknown parameter (see dmesg)




amixer
amixer: Mixer attach default error: No such file or directory


mfg
Sensen

[mrsuicide]

odprobe snd-audigyls
WARNING: Error inserting snd (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd.ko): Input/output error
WARNING: Error inserting snd_timer (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (seedmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_audigyls (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/emu10k1/snd-audigyls.ko): Unknown symbol in module, or unknown parameter (see dmesg)



*g*
in der dmsg steht nix drin o_O (leer)


Glaub ich nicht...bääh! :rolleyes:

Und führ noch mal ./snddevices im alsa-driver-Verzeichnis aus. Das erstellt alle /dev-Nodes.

edit:
Und hilf den Entwicklern mal mit "lspci -vn".

[Sensenmann]

also besser, ich hab keine dmsg, aber ich schneide dir mal die betreffenden Zeilen aus der messages raus:



Oct 2 09:07:17 sensenmann Linux version 2.6.8-gentoo-r3 (root@sensenmann) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #3 SMP Sat Sep 25 14:26:45 CEST 2004
Oct 2 09:07:17 sensenmann BIOS-provided physical RAM map:
Oct 2 09:07:17 sensenmann BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 2 09:07:17 sensenmann BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 2 09:07:17 sensenmann BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
Oct 2 09:07:17 sensenmann BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 2 09:07:17 sensenmann BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
Oct 2 09:07:17 sensenmann BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
Oct 2 09:07:17 sensenmann BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
Oct 2 09:07:17 sensenmann BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 2 09:07:17 sensenmann BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 2 09:07:17 sensenmann BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Oct 2 09:07:17 sensenmann 767MB LOWMEM available.
Oct 2 09:07:17 sensenmann found SMP MP-table at 000fb940
Oct 2 09:07:17 sensenmann On node 0 totalpages: 196592
Oct 2 09:07:17 sensenmann DMA zone: 4096 pages, LIFO batch:1
Oct 2 09:07:17 sensenmann Normal zone: 192496 pages, LIFO batch:16
Oct 2 09:07:17 sensenmann HighMem zone: 0 pages, LIFO batch:1
Oct 2 09:07:17 sensenmann DMI 2.3 present.
Oct 2 09:07:17 sensenmann ACPI: RSDP (v000 AMI ) @ 0x000fa8f0
Oct 2 09:07:17 sensenmann ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x2fff0000
Oct 2 09:07:17 sensenmann ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x2fff0030
Oct 2 09:07:17 sensenmann ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x2fff00c0
Oct 2 09:07:17 sensenmann ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
Oct 2 09:07:17 sensenmann ACPI: PM-Timer IO Port: 0x808
Oct 2 09:07:17 sensenmann ACPI: Local APIC address 0xfee00000
Oct 2 09:07:17 sensenmann ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Oct 2 09:07:17 sensenmann Processor #0 6:6 APIC version 16
Oct 2 09:07:17 sensenmann ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 2 09:07:17 sensenmann IOAPIC[0]: Assigned apic_id 2
Oct 2 09:07:17 sensenmann IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Oct 2 09:07:17 sensenmann ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 2 09:07:17 sensenmann ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 2 09:07:17 sensenmann ACPI: IRQ0 used by override.
Oct 2 09:07:17 sensenmann ACPI: IRQ2 used by override.
Oct 2 09:07:17 sensenmann ACPI: IRQ9 used by override.
Oct 2 09:07:17 sensenmann Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 2 09:07:17 sensenmann Using ACPI (MADT) for SMP configuration information
Oct 2 09:07:17 sensenmann Built 1 zonelists
Oct 2 09:07:17 sensenmann Kernel command line: root=/dev/hdb3
Oct 2 09:07:17 sensenmann Initializing CPU#0
Oct 2 09:07:17 sensenmann CPU 0 irqstacks, hard=c0577000 soft=c056f000
Oct 2 09:07:17 sensenmann PID hash table entries: 4096 (order 12: 32768 bytes)
Oct 2 09:07:17 sensenmann Detected 1533.900 MHz processor.
Oct 2 09:07:17 sensenmann Using pmtmr for high-res timesource
Oct 2 09:07:17 sensenmann Console: colour VGA+ 80x25
Oct 2 09:07:17 sensenmann Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 2 09:07:17 sensenmann Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 2 09:07:17 sensenmann Memory: 773432k/786368k available (3134k kernel code, 12188k reserved, 1178k data, 200k init, 0k highmem)
Oct 2 09:07:17 sensenmann Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 2 09:07:17 sensenmann Calibrating delay loop... 3039.23 BogoMIPS
Oct 2 09:07:17 sensenmann Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 2 09:07:17 sensenmann CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
Oct 2 09:07:17 sensenmann CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
Oct 2 09:07:17 sensenmann CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 2 09:07:17 sensenmann CPU: L2 Cache: 256K (64 bytes/line)
Oct 2 09:07:17 sensenmann CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Oct 2 09:07:17 sensenmann Intel machine check architecture supported.
Oct 2 09:07:17 sensenmann Intel machine check reporting enabled on CPU#0.
Oct 2 09:07:17 sensenmann Enabling fast FPU save and restore... done.
Oct 2 09:07:17 sensenmann Enabling unmasked SIMD FPU exception support... done.
Oct 2 09:07:17 sensenmann Checking 'hlt' instruction... OK.
Oct 2 09:07:17 sensenmann CPU0: AMD Athlon(tm) XP 1800+ stepping 02
Oct 2 09:07:17 sensenmann per-CPU timeslice cutoff: 731.39 usecs.
Oct 2 09:07:17 sensenmann task migration cache decay timeout: 1 msecs.
Oct 2 09:07:17 sensenmann enabled ExtINT on CPU#0
Oct 2 09:07:17 sensenmann ESR value before enabling vector: 00000080
Oct 2 09:07:17 sensenmann ESR value after enabling vector: 00000000
Oct 2 09:07:17 sensenmann Total of 1 processors activated (3039.23 BogoMIPS).
Oct 2 09:07:17 sensenmann ENABLING IO-APIC IRQs
Oct 2 09:07:17 sensenmann init IO_APIC IRQs
Oct 2 09:07:17 sensenmann IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Oct 2 09:07:17 sensenmann ..TIMER: vector=0x31 pin1=2 pin2=-1
Oct 2 09:07:17 sensenmann Using local APIC timer interrupts.
Oct 2 09:07:17 sensenmann calibrating APIC timer ...
Oct 2 09:07:17 sensenmann ..... CPU clock speed is 1533.0229 MHz.
Oct 2 09:07:17 sensenmann ..... host bus clock speed is 266.0648 MHz.
Oct 2 09:07:17 sensenmann Brought up 1 CPUs
Oct 2 09:07:17 sensenmann CPU0: online
Oct 2 09:07:17 sensenmann domain 0: span 01
Oct 2 09:07:17 sensenmann groups: 01
Oct 2 09:07:17 sensenmann domain 1: span 01
Oct 2 09:07:17 sensenmann groups: 01
Oct 2 09:07:17 sensenmann NET: Registered protocol family 16
Oct 2 09:07:17 sensenmann PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
Oct 2 09:07:17 sensenmann PCI: Using configuration type 1
Oct 2 09:07:17 sensenmann mtrr: v2.0 (20020519)
Oct 2 09:07:17 sensenmann ACPI: Subsystem revision 20040326
Oct 2 09:07:17 sensenmann ACPI: Interpreter enabled
Oct 2 09:07:17 sensenmann ACPI: Using IOAPIC for interrupt routing
Oct 2 09:07:17 sensenmann ACPI: PCI Root Bridge [PCI0] (00:00)
Oct 2 09:07:17 sensenmann PCI: Probing PCI hardware (bus 00)
Oct 2 09:07:17 sensenmann ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 2 09:07:17 sensenmann ACPI: Power Resource [URP1] (off)
Oct 2 09:07:17 sensenmann ACPI: Power Resource [URP2] (off)
Oct 2 09:07:17 sensenmann ACPI: Power Resource [FDDP] (off)
Oct 2 09:07:17 sensenmann ACPI: Power Resource [LPTP] (off)
Oct 2 09:07:17 sensenmann ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Oct 2 09:07:17 sensenmann ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 2 09:07:17 sensenmann ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 2 09:07:17 sensenmann ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 2 09:07:17 sensenmann SCSI subsystem initialized
Oct 2 09:07:17 sensenmann usbcore: registered new driver usbfs
Oct 2 09:07:17 sensenmann usbcore: registered new driver hub
Oct 2 09:07:17 sensenmann PCI: Using ACPI for IRQ routing
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 2 09:07:17 sensenmann number of MP IRQ sources: 15.
Oct 2 09:07:17 sensenmann number of IO-APIC #2 registers: 24.
Oct 2 09:07:17 sensenmann testing the IO APIC.......................
Oct 2 09:07:17 sensenmann IO APIC #2......
Oct 2 09:07:17 sensenmann .... register #00: 02000000
Oct 2 09:07:17 sensenmann ....... : physical APIC id: 02
Oct 2 09:07:17 sensenmann ....... : Delivery Type: 0
Oct 2 09:07:17 sensenmann ....... : LTS : 0
Oct 2 09:07:17 sensenmann .... register #01: 00178003
Oct 2 09:07:17 sensenmann ....... : max redirection entries: 0017
Oct 2 09:07:17 sensenmann ....... : PRQ implemented: 1
Oct 2 09:07:17 sensenmann ....... : IO APIC version: 0003
Oct 2 09:07:17 sensenmann .... IRQ redirection table:
Oct 2 09:07:17 sensenmann NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Oct 2 09:07:17 sensenmann 00 000 00 1 0 0 0 0 0 0 00
Oct 2 09:07:17 sensenmann 01 001 01 0 0 0 0 0 1 1 39
Oct 2 09:07:17 sensenmann 02 001 01 0 0 0 0 0 1 1 31
Oct 2 09:07:17 sensenmann 03 001 01 0 0 0 0 0 1 1 41
Oct 2 09:07:17 sensenmann 04 001 01 0 0 0 0 0 1 1 49
Oct 2 09:07:17 sensenmann 05 001 01 0 0 0 0 0 1 1 51
Oct 2 09:07:17 sensenmann 06 001 01 0 0 0 0 0 1 1 59
Oct 2 09:07:17 sensenmann 07 001 01 0 0 0 0 0 1 1 61
Oct 2 09:07:17 sensenmann 08 001 01 0 0 0 0 0 1 1 69
Oct 2 09:07:17 sensenmann 09 001 01 0 1 0 1 0 1 1 71
Oct 2 09:07:17 sensenmann 0a 001 01 0 0 0 0 0 1 1 79
Oct 2 09:07:17 sensenmann 0b 001 01 0 0 0 0 0 1 1 81
Oct 2 09:07:17 sensenmann 0c 001 01 0 0 0 0 0 1 1 89
Oct 2 09:07:17 sensenmann 0d 001 01 0 0 0 0 0 1 1 91
Oct 2 09:07:17 sensenmann 0e 001 01 0 0 0 0 0 1 1 99
Oct 2 09:07:17 sensenmann 0f 001 01 0 0 0 0 0 1 1 A1
Oct 2 09:07:17 sensenmann 10 001 01 1 1 0 1 0 1 1 C1
Oct 2 09:07:17 sensenmann 11 001 01 1 1 0 1 0 1 1 B1
Oct 2 09:07:17 sensenmann 12 001 01 1 1 0 1 0 1 1 A9
Oct 2 09:07:17 sensenmann 13 000 00 1 0 0 0 0 0 0 00
Oct 2 09:07:17 sensenmann 14 000 00 1 0 0 0 0 0 0 00
Oct 2 09:07:17 sensenmann 15 001 01 1 1 0 1 0 1 1 B9
Oct 2 09:07:17 sensenmann 16 000 00 1 0 0 0 0 0 0 00
Oct 2 09:07:17 sensenmann 17 000 00 1 0 0 0 0 0 0 00
Oct 2 09:07:17 sensenmann IRQ to pin mappings:
Oct 2 09:07:17 sensenmann IRQ0 -> 0:2
Oct 2 09:07:17 sensenmann IRQ1 -> 0:1
Oct 2 09:07:17 sensenmann IRQ3 -> 0:3
Oct 2 09:07:17 sensenmann IRQ4 -> 0:4
Oct 2 09:07:17 sensenmann IRQ5 -> 0:5
Oct 2 09:07:17 sensenmann IRQ6 -> 0:6
Oct 2 09:07:17 sensenmann IRQ7 -> 0:7
Oct 2 09:07:17 sensenmann IRQ8 -> 0:8
Oct 2 09:07:17 sensenmann IRQ9 -> 0:9
Oct 2 09:07:17 sensenmann IRQ10 -> 0:10
Oct 2 09:07:17 sensenmann IRQ11 -> 0:11
Oct 2 09:07:17 sensenmann IRQ12 -> 0:12
Oct 2 09:07:17 sensenmann IRQ13 -> 0:13
Oct 2 09:07:17 sensenmann IRQ14 -> 0:14
Oct 2 09:07:17 sensenmann IRQ15 -> 0:15
Oct 2 09:07:17 sensenmann IRQ16 -> 0:16
Oct 2 09:07:17 sensenmann IRQ17 -> 0:17
Oct 2 09:07:17 sensenmann IRQ18 -> 0:18
Oct 2 09:07:17 sensenmann IRQ21 -> 0:21
Oct 2 09:07:17 sensenmann .................................... done.
Oct 2 09:07:17 sensenmann Machine check exception polling timer started.
Oct 2 09:07:17 sensenmann audit: initializing netlink socket (disabled)
Oct 2 09:07:17 sensenmann audit(1096708014.4294966650:0): initialized
Oct 2 09:07:17 sensenmann devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Oct 2 09:07:17 sensenmann devfs: boot_options: 0x1
Oct 2 09:07:17 sensenmann Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 2 09:07:17 sensenmann NTFS driver 2.1.15 [Flags: R/W].
Oct 2 09:07:17 sensenmann udf: registering filesystem
Oct 2 09:07:17 sensenmann Initializing Cryptographic API
Oct 2 09:07:17 sensenmann PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
Oct 2 09:07:17 sensenmann ACPI: Power Button (FF) [PWRF]
Oct 2 09:07:17 sensenmann ACPI: Sleep Button (CM) [SLPB]
Oct 2 09:07:17 sensenmann ACPI: Processor [CPU1] (supports C1, 16 throttling states)
Oct 2 09:07:17 sensenmann mice: PS/2 mouse device common for all mice
Oct 2 09:07:17 sensenmann input: PC Speaker
Oct 2 09:07:17 sensenmann serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 2 09:07:17 sensenmann serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 2 09:07:17 sensenmann input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 2 09:07:17 sensenmann lp: driver loaded but no devices found
Oct 2 09:07:17 sensenmann Linux agpgart interface v0.100 (c) Dave Jones
Oct 2 09:07:17 sensenmann Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Oct 2 09:07:17 sensenmann ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 2 09:07:17 sensenmann ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 2 09:07:17 sensenmann parport0: PC-style at 0x378 [PCSPP]
Oct 2 09:07:17 sensenmann lp0: using parport0 (polling).
Oct 2 09:07:17 sensenmann RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 2 09:07:17 sensenmann loop: loaded (max 8 devices)
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
Oct 2 09:07:17 sensenmann 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Oct 2 09:07:17 sensenmann 0000:00:07.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xe800. Vers LK1.1.19
Oct 2 09:07:17 sensenmann eth0: Dropping NETIF_F_SG since no checksum feature.
Oct 2 09:07:17 sensenmann PPP generic driver version 2.4.2
Oct 2 09:07:17 sensenmann Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 2 09:07:17 sensenmann ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 2 09:07:17 sensenmann hda: IC35L040AVVA07-0, ATA DISK drive
Oct 2 09:07:17 sensenmann hdb: SAMSUNG SV6004H, ATA DISK drive
Oct 2 09:07:17 sensenmann hdc: HL-DT-ST DVDRAM GMA-4020B, ATAPI CD/DVD-ROM drive
Oct 2 09:07:17 sensenmann hdd: WDC WD307AA-00BAA0, ATA DISK drive
Oct 2 09:07:17 sensenmann Using anticipatory io scheduler
Oct 2 09:07:17 sensenmann ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 2 09:07:17 sensenmann ide1 at 0x170-0x177,0x376 on irq 15
Oct 2 09:07:17 sensenmann hda: max request size: 128KiB
Oct 2 09:07:17 sensenmann hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63
Oct 2 09:07:17 sensenmann /dev/ide/host0/bus0/target0/lun0: p1
Oct 2 09:07:17 sensenmann hdb: max request size: 128KiB
Oct 2 09:07:17 sensenmann hdb: 117306000 sectors (60060 MB) w/468KiB Cache, CHS=65535/16/63
Oct 2 09:07:17 sensenmann /dev/ide/host0/bus0/target1/lun0: p1 p2 p3
Oct 2 09:07:17 sensenmann hdd: max request size: 128KiB
Oct 2 09:07:17 sensenmann hdd: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=59598/16/63
Oct 2 09:07:17 sensenmann /dev/ide/host1/bus0/target1/lun0: p1 < p5 >
Oct 2 09:07:17 sensenmann hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 1312kB Cache
Oct 2 09:07:17 sensenmann Uniform CD-ROM driver Revision: 3.20
Oct 2 09:07:17 sensenmann libata version 1.02 loaded.
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
Oct 2 09:07:17 sensenmann ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
Oct 2 09:07:17 sensenmann ehci_hcd 0000:00:10.3: irq 21, pci mem f080bf00
Oct 2 09:07:17 sensenmann ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
Oct 2 09:07:17 sensenmann ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Oct 2 09:07:17 sensenmann hub 1-0:1.0: USB hub found
Oct 2 09:07:17 sensenmann hub 1-0:1.0: 4 ports detected
Oct 2 09:07:17 sensenmann USB Universal Host Controller Interface driver v2.2
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
Oct 2 09:07:17 sensenmann uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Oct 2 09:07:17 sensenmann uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00
Oct 2 09:07:17 sensenmann uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Oct 2 09:07:17 sensenmann hub 2-0:1.0: USB hub found
Oct 2 09:07:17 sensenmann hub 2-0:1.0: 2 ports detected
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
Oct 2 09:07:17 sensenmann uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Oct 2 09:07:17 sensenmann uhci_hcd 0000:00:10.1: irq 21, io base 0000e000
Oct 2 09:07:17 sensenmann uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Oct 2 09:07:17 sensenmann hub 3-0:1.0: USB hub found
Oct 2 09:07:17 sensenmann hub 3-0:1.0: 2 ports detected
Oct 2 09:07:17 sensenmann usbcore: registered new driver usblp
Oct 2 09:07:17 sensenmann drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Oct 2 09:07:17 sensenmann Initializing USB Mass Storage driver...
Oct 2 09:07:17 sensenmann usbcore: registered new driver usb-storage
Oct 2 09:07:17 sensenmann USB Mass Storage support registered.
Oct 2 09:07:17 sensenmann usbcore: registered new driver usbhid
Oct 2 09:07:17 sensenmann drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Oct 2 09:07:17 sensenmann Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
Oct 2 09:07:17 sensenmann ALSA device list:
Oct 2 09:07:17 sensenmann #0: Virtual MIDI Card 1
Oct 2 09:07:17 sensenmann oprofile: using NMI interrupt.
Oct 2 09:07:17 sensenmann NET: Registered protocol family 2
Oct 2 09:07:17 sensenmann IP: routing cache hash table of 8192 buckets, 64Kbytes
Oct 2 09:07:17 sensenmann TCP: Hash tables configured (established 262144 bind 65536)
Oct 2 09:07:17 sensenmann ip_conntrack version 2.1 (6143 buckets, 49144 max) - 300 bytes per conntrack
Oct 2 09:07:17 sensenmann ip_tables: (C) 2000-2002 Netfilter core team
Oct 2 09:07:17 sensenmann ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
Oct 2 09:07:17 sensenmann arp_tables: (C) 2002 David S. Miller
Oct 2 09:07:17 sensenmann NET: Registered protocol family 1
Oct 2 09:07:17 sensenmann NET: Registered protocol family 17
Oct 2 09:07:17 sensenmann ACPI: (supports S0 S1 S4 S5)
Oct 2 09:07:17 sensenmann kjournald starting. Commit interval 5 seconds
Oct 2 09:07:17 sensenmann EXT3-fs: mounted filesystem with ordered data mode.
Oct 2 09:07:17 sensenmann VFS: Mounted root (ext3 filesystem) readonly.
Oct 2 09:07:17 sensenmann Mounted devfs on /dev
Oct 2 09:07:17 sensenmann Freeing unused kernel memory: 200k freed
Oct 2 09:07:17 sensenmann usb 2-1: new full speed USB device using address 2
Oct 2 09:07:17 sensenmann hub 2-1:1.0: USB hub found
Oct 2 09:07:17 sensenmann hub 2-1:1.0: 4 ports detected
Oct 2 09:07:17 sensenmann usb 2-1.4: new low speed USB device using address 3
Oct 2 09:07:17 sensenmann input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1.4
Oct 2 09:07:17 sensenmann Adding 506036k swap on /dev/hdb2. Priority:-1 extents:1
Oct 2 09:07:17 sensenmann EXT3 FS on hdb3, internal journal
Oct 2 09:07:17 sensenmann nvidia: module license 'NVIDIA' taints kernel.
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 2 09:07:17 sensenmann NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004
Oct 2 09:07:17 sensenmann NTFS-fs warning (device hda1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
Oct 2 09:07:17 sensenmann NTFS volume version 3.1.
Oct 2 09:07:17 sensenmann unable to register native major device number 116
Oct 2 09:07:17 sensenmann modprobe: WARNING: Error inserting snd (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd.ko): Input/output error
Oct 2 09:07:17 sensenmann snd_timer: Unknown symbol snd_compat_kcalloc
Oct 2 09:07:17 sensenmann modprobe: WARNING: Error inserting snd_timer (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Oct 2 09:07:17 sensenmann snd_pcm: Unknown symbol snd_compat_kcalloc
Oct 2 09:07:17 sensenmann modprobe: WARNING: Error inserting snd_pcm (/lib/modules/2.6.8-gentoo-r3/kernel/sound/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Oct 2 09:07:17 sensenmann snd_ac97_codec: Unknown symbol snd_compat_kcalloc
Oct 2 09:07:17 sensenmann modprobe: WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Oct 2 09:07:17 sensenmann snd_audigyls: Unknown symbol snd_compat_kcalloc
Oct 2 09:07:17 sensenmann snd_audigyls: Unknown symbol snd_ac97_mixer
Oct 2 09:07:17 sensenmann snd_audigyls: Unknown symbol snd_ac97_bus
Oct 2 09:07:17 sensenmann modprobe: FATAL: Error inserting snd_audigyls (/lib/modules/2.6.8-gentoo-r3/kernel/sound/pci/emu10k1/snd-audigyls.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Oct 2 09:07:17 sensenmann VP_IDE: IDE controller at PCI slot 0000:00:11.1
Oct 2 09:07:17 sensenmann ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
Oct 2 09:07:17 sensenmann VP_IDE: chipset revision 6
Oct 2 09:07:17 sensenmann VP_IDE: not 100% native mode: will probe irqs later
Oct 2 09:07:17 sensenmann VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Oct 2 09:07:17 sensenmann VP_IDE: port 0x01f0 already claimed by ide0
Oct 2 09:07:17 sensenmann VP_IDE: port 0x0170 already claimed by ide1
Oct 2 09:07:17 sensenmann VP_IDE: neither IDE port enabled (BIOS)
Oct 2 09:07:19 sensenmann cron[6418]: (CRON) STARTUP (fork ok)





lspci -vn
0000:00:00.0 Class 0600: 1106:3099
Subsystem: 1106:0000
Flags: bus master, 66Mhz, medium devsel, latency 0
Memory at e0000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2

0000:00:01.0 Class 0604: 1106:b099
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: bdc00000-ddcfffff
Capabilities: [80] Power Management version 2

0000:00:07.0 Class 0200: 10b7:9050
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at e800 [size=dfff0000]
Expansion ROM at 00010000 [disabled]

0000:00:0a.0 Class 0401: 1102:0007
Subsystem: 1102:1002
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at e400
Capabilities: [dc] Power Management version 2

0000:00:0a.1 Class 0980: 1102:7005
Subsystem: 1102:1002
Flags: bus master, medium devsel, latency 32
I/O ports at ec00
Capabilities: [dc] Power Management version 2

0000:00:10.0 Class 0c03: 1106:3038 (rev 80)
Subsystem: 1106:3038
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.1 Class 0c03: 1106:3038 (rev 80)
Subsystem: 1106:3038
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.3 Class 0c03: 1106:3104 (rev 82) (prog-if 20)
Subsystem: 1106:3104
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at dffeff00 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 2

0000:00:11.0 Class 0601: 1106:3177
Subsystem: 1106:0000
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

0000:00:11.1 Class 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: 1106:0571
Flags: bus master, medium devsel, latency 32, IRQ 255
I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2

0000:01:00.0 Class 0300: 10de:0312 (rev a1)
Subsystem: 1462:9123
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16
Memory at de000000 (32-bit, non-prefetchable) [size=dfee0000]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at 00020000 [disabled]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0


gruß
Sensenmann

[mrsuicide]

Probier mal:
rmmod snd-page-alloc und dann insmod snd-page-alloc

[Sensenmann]

insmod snd-page-alloc
insmod: can't read 'snd-page-alloc': No such file or directory

[Sensenmann]

was bedeutet denn dieses "input-output error" ?