Archiv verlassen und diese Seite im Standarddesign anzeigen : hotmail Nachrichten auf Mozilla??
Hi @ all
Vor euch steht ein vollkommener Anfaeger....
So....Mails bekomme ich schon auf meine normale Adresse, aber wie bringe ich meinen HOtmail Account auch auf Mozilla damit ich diese Mails auch direkt abfragen kann?
Vielen Dank Im vorraus!
P.S Habe was von Postman oder gotmail gehoert aber da ich erst seit 2 tagen Linux habe und ueberhaupt nicht damit umgehen kann weiss ich auch nicht wie ich sowas installiere. Please help!! :confused:
woody_goothrie
03.08.04, 02:06
Du kannst Hotmail nur im Browser abfragen, da die imho kein POP3 unterstützen.
Alternativ gehts evtl., wenn Du per Wine IE mit Outlook oder Outlook Express zum Laufen bekommst, damit kannst Du Hotmail-Konten per HTTP abfragen, in anderen Mailclients kenne ich das nicht.
Tipp: Geh von Hotmail weg, wenn Du von Windows weg willst. Gibt genug bessere Mail-Dienste, auf die Du mit jedem Mailclient zugreifen kannst. ;)
king_of_R&R
03.08.04, 12:21
IMHO gibt es irgendwelche kleinen Progrämmchen, die diese http-mails auch abfragen können (extra für hotmail)..
solltest mal bei freshmeat danach suchen.
Gruß
king_of_r&r
@woody_goothrie: welche andere mailclients z.B?
@king_of_R&R: ja aber diese Programme muss ichja installieren aber das beherrsche ich noch nicht auf Linux oder geht es wir bei Windows einfach klick und es wird automatisch gemacht????
@woody_goothrie: welche andere mailclients z.B?
Er sprach von Maildiensten, wie z.B. web.de, gmx.de usw.
@king_of_R&R: ja aber diese Programme muss ichja installieren aber das beherrsche ich noch nicht auf Linux oder geht es wir bei Windows einfach klick und es wird automatisch gemacht????
http://www.debiananwenderhandbuch.de/ (Nein, es ist nicht einfach ein Klick wie unter Windows)
Grüße
Bjoern
Die LÖSUNG:
hotwayd:
http://hotwayd.sourceforge.net/manhotwayd/
War bei meiner Disrti (Mandrake Cooker) sogar als rpm dabei !!
Und genau das ist auch mein Problem.
Also ich habe evolution + hotwayd. Allerdings weiß ich nicht, wie ich hotwayd konfigurieren muss, bzw, was ich bei evolution unter "konto einrichten" so alles eingeben muss.
Googlen brachte mich nicht weiter, vielleicht weiß einer von euch weiter.
So sieht die hotwayd config gerade aus:
service hotwayd
{
disable = no
type = unlisted
socket_type = stream
protocol = tcp
wait = no
user = nobody
groups = yes
server = /usr/sbin/hotwayd
# server_args = -p http://proxy:8080
port = 110
bind = 127.0.0.1
}
Und bei Evolution hab ich unter: Abrufen von e-Mails
Server-Typ = POP
Rechner = ?? weiß nich, was hier rein muss
Benutzername = eben meinen hotmail Benutzer namen
Kann mir jemand helfen??
king_of_R&R
03.08.04, 16:08
gibts bei mdk etwas zum einstellen von netzwerkdiensten?
Von Hand soll man es so machen (steht in der man unten bei configuration):
Ansonsten weiß ich nicht, ob inetd bei dir ständig läuft.. aber naja,
vielleicht solltest du das hier mal in die /etc/services einfügen:
hotway 110/tcp # pop3/httpmail gateway
und in die /etc/inetd.conf
hotway stream tcp nowait root /usr/sbin/tcpd /usr/local/bin/hotwayd
und als pop-server bei evolution gibst du 127.0.0.1:110 ein....
als user und pw solltest du das von deinem hotmail-konto nehmen.
Gruß
king_of_r&r
ich benutze aber offensichtlich xinetd, deshalb geht das irgendwie anders. In der Readme steh auch wie, aber ich versteh's nich so ganz :confused:
das hier ist die readme.
Adding hotwayd to the xinetd configuration files
------------------------------------------------
1. Next step is to add the following to your xinetd configuration.
Either copy the following to /etc/xinetd.conf or to a file
called hotwayd in your /etc/xinetd.d directory (this depends on
the way your distributino handles the xinetd setup files)
service hotwayd
{
disable = no
type = unlisted
socket_type = stream
protocol = tcp
wait = no
user = nobody
groups = yes
#server = /usr/local/sbin/hotwayd (use this for source install)
server = /usr/sbin/hotwayd
#server_args = -p http://proxy:8080 -u proxy_user -q proxy_password
port = 110
}
Note 1: If you prefer to have hotwayd listen on a different port
then replace the 110 with whichever port you would like to use.
Note 2: The directory where hotwayd was installed may be
different (e.g. /usr/local/sbin/hotwayd) in which case you will
need to specify the correct directory for the "server" option.
Note 3: For those who security is of a major concern, it may be
better to create a specific hotwayd account and use "user =
hotwayd". Refer to your xinetd instructions for further
information.
Note 4: If you have a proxy server that you must use to access
the internet then you must enter it in the server_args field and
remove the # symbol at the front. The username and password
fields are optional. If you don't use a proxy server then simply
leave the # in front of server_args and hotwayd will connect
directly to the internet. If you enter a username and password
you may want to remove world readable flags.
2. Now you need to tell xinetd to reload the configuration file
If you have the killall program, issue the following command:
$ killall -HUP xinetd
Otherwise you need to get the PID number of the running xinetd
process. This can be done on linux by issuing the following
command:
$ ps -eo "%p %c" | grep xinetd
If it doesn't report any process xinetd then you need to start
up xinetd. Optimally it should be started during bootup in your
rc.d scripts. Refer to your operating system notes for further
details.
Now that you have the PID number, you need to load in the new
configuration file. This is done by issuing the following
command:
$ kill -HUP pidnumber
3. Check your security settings
You need to ensure that connections to the pop3 server are not
blocked. To do this add the following line to your
/etc/hosts.allow file
hotwayd : 127.0.0.1
(or if you are setting up hotwayd to run on another computer
than your mail client, replace 127.0.0.1 with the address of the
computer which you will use your mail client from). 127.0.0.1
always refers to your computer.
You should now be able to telnet into your hotwayd service. Type
the command
telnet addr port_number
e.g. telnet 127.0.0.1 110 if you setup hotwayd on your own
machine using port 110. If you can't connect then go back and
review your steps. You can also check if anything is listening
on the port using the command netstat. An example is:
$ netstat -lp
You should see in the column "Local Address" either *:pop3 or
*:port_number if you used a different port to 110 (standard for
pop3). The program name should show "xxxx/xinetd". If you don't
see this when you run netstat then there is a problem with your
xinetd setup.
4. Setup your favourite mail client to use your newly installed
server.
You should give the POP-3 server address as either "127.0.0.1",
"localhost.localdomain" or the name of your machine. The port
number depends on what you entered in the /etc/services
file. Use the username (with @hotmail.com, @lycos.co.uk or
@msn.com for the latest version of hotwayd) and password that
you normally use when accessing your email via the respective
web interface.
5. Done! Now enjoy your newly installed POP3-HTTPMail gateway!
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.