tim
16.07.04, 19:10
Hi zusammen
Ich hab ne Frage zu meinem dhcpd server.
Wenn ich ihn versuche zu starten "/usr/sbin/dhcpd start"
kommt folgendes:
Internet Software Consortium DHCP Server 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
No subnet declaration for start (0.0.0.0).
Please write a subnet declaration in your dhcpd.conf file for the
network segment to which interface start is attached.
exiting.
Meine dhcpd.conf:
option domain-name "olymp.local";
option domain-name-servers 194.120.12.245;
option subnet-mask 255.255.255.0;
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.100 192.168.0.200;
option broadcast-address 192.168.0.255;
option routers 192.168.0.1;
}
host zeus {
hardware ethernet xx:30:xx:9B:xx:36;
fixed-address 192.168.0.101;
option host-name "zeus";
}
Die Config File in /etc/init.d ist auch auf das richtige Interface gestellt "eth0"
Gibt es da noch mehr was man beachten muß ?
Hab hier in anderen Beiträgen nix gefunden was ich nicht schon eh gemacht hatte.
Naja für ne Idee wäre ich super dankbar :)
Danke schonmal
Timmi
Ich hab ne Frage zu meinem dhcpd server.
Wenn ich ihn versuche zu starten "/usr/sbin/dhcpd start"
kommt folgendes:
Internet Software Consortium DHCP Server 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
No subnet declaration for start (0.0.0.0).
Please write a subnet declaration in your dhcpd.conf file for the
network segment to which interface start is attached.
exiting.
Meine dhcpd.conf:
option domain-name "olymp.local";
option domain-name-servers 194.120.12.245;
option subnet-mask 255.255.255.0;
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.100 192.168.0.200;
option broadcast-address 192.168.0.255;
option routers 192.168.0.1;
}
host zeus {
hardware ethernet xx:30:xx:9B:xx:36;
fixed-address 192.168.0.101;
option host-name "zeus";
}
Die Config File in /etc/init.d ist auch auf das richtige Interface gestellt "eth0"
Gibt es da noch mehr was man beachten muß ?
Hab hier in anderen Beiträgen nix gefunden was ich nicht schon eh gemacht hatte.
Naja für ne Idee wäre ich super dankbar :)
Danke schonmal
Timmi