PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Cups, Suse 9.0, Epson EPL 5900L



Multe
09.07.04, 13:03
Hallo,

ich bin am verzweifeln, ich hab mich an das Howto auf www.linuxprinting.org für meinen Drucker gehalten.
Allerdings will mein Drucker nicht drucken (Testseite), anderes hab ich noch nicht probiert.
Drucker hängt per USB dran, wird auch laut /var/log/messages erkannt:

Jul 9 11:26:07 Multes-Knecht kernel: hub.c: new USB device 00:02.1-1.1, assigned address 4
Jul 9 11:26:07 Multes-Knecht kernel: usb.c: USB device 4 (vend/prod 0x4b8/0x5) is not claimed by any active driver.
Jul 9 11:26:10 Multes-Knecht kernel: usb.c: registered new driver usblp
Jul 9 11:26:10 Multes-Knecht kernel: printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
Jul 9 11:26:10 Multes-Knecht kernel: printer.c: v0.11: USB Printer Device Class driver
Jul 9 11:26:10 Multes-Knecht insmod: Using /lib/modules/2.4.21-99-athlon/kernel/drivers/usb/printer.o
Jul 9 11:26:10 Multes-Knecht insmod: Symbol version prefix ''
'

Ausgabe von Cups Errorlog (debuglevel):



E [09/Jul/2004:12:34:14 +0200] Scheduler shutting down due to SIGTERM.
I [09/Jul/2004:12:34:14 +0200] Listening to 0:631
D [09/Jul/2004:12:34:14 +0200] AddLocation: added location 'CUPS_INTERNAL_BROWSE_ACL'
D [09/Jul/2004:12:34:14 +0200] AllowHost: CUPS_INTERNAL_BROWSE_ACL allow @LOCAL
D [09/Jul/2004:12:34:14 +0200] DenyIP: CUPS_INTERNAL_BROWSE_ACL deny 00000000/00000000
D [09/Jul/2004:12:34:14 +0200] AddLocation: added location '/'
D [09/Jul/2004:12:34:14 +0200] DenyIP: / deny 00000000/00000000
D [09/Jul/2004:12:34:14 +0200] AllowIP: / allow 7f000001/ffffffff
D [09/Jul/2004:12:34:14 +0200] AllowIP: / allow 7f000002/ffffffff
D [09/Jul/2004:12:34:14 +0200] AllowHost: / allow @LOCAL
D [09/Jul/2004:12:34:14 +0200] AddLocation: added location '/admin'
D [09/Jul/2004:12:34:14 +0200] DenyIP: /admin deny 00000000/00000000
D [09/Jul/2004:12:34:14 +0200] AllowIP: /admin allow 7f000001/ffffffff
I [09/Jul/2004:12:34:14 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [09/Jul/2004:12:34:14 +0200] Configured for up to 100 clients.
I [09/Jul/2004:12:34:14 +0200] Allowing up to 100 client connections per host.
I [09/Jul/2004:12:34:14 +0200] Full reload is required.
D [09/Jul/2004:12:34:14 +0200] LoadAllPrinters: Loading printer Epson_EPL_5900L...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "ipp"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "lpd"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "smb"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb://EPSON/EPL-5900L"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp1"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp2"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp3"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp4"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp5"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp6"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp7"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp8"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp9"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp10"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp11"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp12"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp13"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp14"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "usb:/dev/usb/lp15"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "http"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "pipe"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "scsi"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "canon:/dev/lp0"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "epson:/dev/lp0"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "parallel:/dev/lp0"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS4?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS5?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS6?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS7?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS8?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS9?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS10?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS11?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS12?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS13?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS14?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS15?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS16?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS17?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS18?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS19?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS20?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS21?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS22?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "serial:/dev/ttyS23?baud=115200"...
D [09/Jul/2004:12:34:14 +0200] LoadDevices: Added device "socket"...
I [09/Jul/2004:12:34:14 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3173 PPDs...
I [09/Jul/2004:12:34:15 +0200] LoadPPDs: No new or changed PPDs...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Scanning /var/spool/cups...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Loading attributes for job 3...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Loading attributes for job 4...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Loading attributes for job 5...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Loading attributes for job 6...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Loading attributes for job 7...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Loading attributes for job 8...
D [09/Jul/2004:12:34:15 +0200] LoadAllJobs: Loading attributes for job 9...
I [09/Jul/2004:12:34:15 +0200] Full reload complete.
D [09/Jul/2004:12:34:15 +0200] StartListening: NumListeners=1
D [09/Jul/2004:12:34:15 +0200] StartListening: address=00000000 port=631
D [09/Jul/2004:12:34:15 +0200] ResumeListening: setting input bits...
D [09/Jul/2004:12:34:17 +0200] AcceptClient() 5 from localhost:631.
D [09/Jul/2004:12:34:17 +0200] ReadClient() 5 GET /printers HTTP/1.1
D [09/Jul/2004:12:34:17 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 4104
I [09/Jul/2004:12:34:17 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=4104)
D [09/Jul/2004:12:34:17 +0200] SendCommand() 5 file=7
D [09/Jul/2004:12:34:17 +0200] AcceptClient() 8 from localhost:631.
D [09/Jul/2004:12:34:18 +0200] ReadClient() 8 POST / HTTP/1.1
D [09/Jul/2004:12:34:18 +0200] ProcessIPPRequest: 8 status_code=0
D [09/Jul/2004:12:34:18 +0200] ReadClient() 8 POST / HTTP/1.1
D [09/Jul/2004:12:34:18 +0200] ProcessIPPRequest: 8 status_code=1
D [09/Jul/2004:12:34:18 +0200] CloseClient() 8
D [09/Jul/2004:12:34:22 +0200] ReadClient() 5 GET /printers/Epson_EPL_5900L?op=print-test-page HTTP/1.1
D [09/Jul/2004:12:34:22 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 4106
I [09/Jul/2004:12:34:22 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=4106)
D [09/Jul/2004:12:34:22 +0200] SendCommand() 5 file=8
D [09/Jul/2004:12:34:22 +0200] AcceptClient() 7 from localhost:631.
D [09/Jul/2004:12:34:22 +0200] ReadClient() 7 POST /printers/Epson_EPL_5900L HTTP/1.1
D [09/Jul/2004:12:34:22 +0200] print_job: request file type is application/postscript.
D [09/Jul/2004:12:34:22 +0200] check_quotas: requesting-user-name = 'root'
D [09/Jul/2004:12:34:22 +0200] print_job: requesting-user-name = 'root'
D [09/Jul/2004:12:34:22 +0200] Adding default job-sheets values "none,none"...
I [09/Jul/2004:12:34:22 +0200] Adding start banner page "none" to job 10.
I [09/Jul/2004:12:34:22 +0200] Adding end banner page "none" to job 10.
I [09/Jul/2004:12:34:22 +0200] Job 10 queued on 'Epson_EPL_5900L' by 'root'.
D [09/Jul/2004:12:34:22 +0200] Job 10 hold_until = 0
D [09/Jul/2004:12:34:22 +0200] StartJob(10, 0x80977b8)
D [09/Jul/2004:12:34:22 +0200] StartJob() id = 10, file = 0/1
D [09/Jul/2004:12:34:22 +0200] job-sheets=none,none
D [09/Jul/2004:12:34:22 +0200] banner_page = 0
D [09/Jul/2004:12:34:22 +0200] StartJob: argv = "Epson_EPL_5900L","10","root","Test Page","1","","/var/spool/cups/d00010-001"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[2]="USER=root"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[3]="CHARSET=iso-8859-1"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[4]="LANG=en"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[5]=""
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[6]="PPD=/etc/cups/ppd/Epson_EPL_5900L.ppd"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[7]="CUPS_SERVERROOT=/etc/cups"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[8]="RIP_MAX_CACHE=8m"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[9]="TMPDIR=/var/spool/cups/tmp"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[10]="CONTENT_TYPE=application/postscript"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[11]="DEVICE_URI=usb://EPSON/EPL-5900L"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[12]="PRINTER=Epson_EPL_5900L"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[13]="CUPS_DATADIR=/usr/share/cups"
D [09/Jul/2004:12:34:22 +0200] StartJob: envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [09/Jul/2004:12:34:22 +0200] StartJob: statusfds = [ 9 10 ]
D [09/Jul/2004:12:34:22 +0200] StartJob: filterfds[1] = [ 11 -1 ]
D [09/Jul/2004:12:34:22 +0200] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [09/Jul/2004:12:34:22 +0200] StartJob: filterfds[0] = [ 12 13 ]
D [09/Jul/2004:12:34:22 +0200] start_process("/usr/lib/cups/filter/pstops", 0xbffef9d0, 0xbffeed40, 11, 13, 10)
I [09/Jul/2004:12:34:22 +0200] Started filter /usr/lib/cups/filter/pstops (PID 4107) for job 10.
D [09/Jul/2004:12:34:22 +0200] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [09/Jul/2004:12:34:22 +0200] StartJob: filterfds[1] = [ 11 14 ]
D [09/Jul/2004:12:34:22 +0200] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffef9d0, 0xbffeed40, 12, 14, 10)
I [09/Jul/2004:12:34:22 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 4108) for job 10.
D [09/Jul/2004:12:34:22 +0200] StartJob: backend = "/usr/lib/cups/backend/usb"
D [09/Jul/2004:12:34:22 +0200] StartJob: filterfds[0] = [ -1 12 ]
D [09/Jul/2004:12:34:22 +0200] start_process("/usr/lib/cups/backend/usb", 0xbffef9d0, 0xbffeed40, 11, 12, 10)
I [09/Jul/2004:12:34:22 +0200] Started backend /usr/lib/cups/backend/usb (PID 4109) for job 10.
D [09/Jul/2004:12:34:22 +0200] ProcessIPPRequest: 7 status_code=0
D [09/Jul/2004:12:34:22 +0200] [Job 10] Page = 595x842; 12,12 to 583,830
D [09/Jul/2004:12:34:22 +0200] [Job 10] slowcollate=0, slowduplex=0, sloworder=0
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%BoundingBox: 0 0 612 792
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%Pages: 1
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%LanguageLevel: 1
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%DocumentData: Clean7Bit
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%DocumentSuppliedResources: procset testprint/1.0
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%Creator: Michael Sweet, Easy Software Products
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%CreationDate: May 11, 1999
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%Title: Test Page
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%EndComments
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%BeginProlog
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%BeginResource procset testprint 1.1 0
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%EndResource
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%EndProlog
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%Page: 1 1
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%Page: 1 1
D [09/Jul/2004:12:34:22 +0200] [Job 10] pw = 571.0, pl = 818.0
D [09/Jul/2004:12:34:22 +0200] [Job 10] PageLeft = 12.0, PageRight = 583.0
D [09/Jul/2004:12:34:22 +0200] [Job 10] PageTop = 830.0, PageBottom = 12.0
D [09/Jul/2004:12:34:22 +0200] [Job 10] PageWidth = 595.0, PageLength = 842.0
D [09/Jul/2004:12:34:22 +0200] CloseClient() 7
D [09/Jul/2004:12:34:22 +0200] [Job 10] LPGETSTATUS returned a port status of 18...
W [09/Jul/2004:12:34:22 +0200] [Job 10] Media tray empty!
D [09/Jul/2004:12:34:22 +0200] [Job 10] foomatic-rip version $Revision: 3.43.2.5 $ running...
D [09/Jul/2004:12:34:22 +0200] [Job 10] Parsing PPD file ...
D [09/Jul/2004:12:34:22 +0200] [Job 10] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option ColorSpace
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option Resolution
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option PageSize
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option PageRegion
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option ImageableArea
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option PaperDimension
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option PrintoutMode
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option FlowControl
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option Density
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option TonerSave
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option Dpi
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option Ritech
D [09/Jul/2004:12:34:22 +0200] [Job 10] Added option Font
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] Parameter Summary
D [09/Jul/2004:12:34:22 +0200] [Job 10] -----------------
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] Spooler: cups
D [09/Jul/2004:12:34:22 +0200] [Job 10] Printer: Epson_EPL_5900L
D [09/Jul/2004:12:34:22 +0200] [Job 10] PPD file: /etc/cups/ppd/Epson_EPL_5900L.ppd
D [09/Jul/2004:12:34:22 +0200] [Job 10] Printer model: Epson EPL-5900L Foomatic/epl5900l MULTE(recommended)
D [09/Jul/2004:12:34:22 +0200] [Job 10] Job title: Test Page
D [09/Jul/2004:12:34:22 +0200] [Job 10] File(s) to be printed:
D [09/Jul/2004:12:34:22 +0200] [Job 10] <STDIN>
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] ================================================
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] File: <STDIN>
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] ================================================
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] Reading PostScript input ...
D [09/Jul/2004:12:34:22 +0200] [Job 10] --> This document is DSC-conforming!
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] -----------
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginProlog
D [09/Jul/2004:12:34:22 +0200] [Job 10] 0 %%EOF
D [09/Jul/2004:12:34:22 +0200] [Job 10] Saw EOF!
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%EndProlog
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] -----------
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginSetup
D [09/Jul/2004:12:34:22 +0200] [Job 10] Inserting PostScript code for CUPS' page accounting
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginFeature: *PrintoutMode Normal
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: PrintoutMode=Normal --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: PrintoutMode=Normal --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginFeature: *PageSize A4
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: PageSize=A4 --> Option will be set by PostScript interpreter
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginFeature: *FlowControl Off
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: FlowControl=Off --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %% FoomaticRIPOptionSetting: FlowControl=Off
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: FlowControl=Off --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginFeature: *Dpi FromPrintoutMode
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: Dpi=FromPrintoutMode --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %% FoomaticRIPOptionSetting: Dpi=@PrintoutMode
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: Dpi=FromPrintoutMode --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginFeature: *Density 3
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: Density=3 --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %% FoomaticRIPOptionSetting: Density=3
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: Density=3 --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginFeature: *Ritech FromPrintoutMode
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: Ritech=FromPrintoutMode --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %% FoomaticRIPOptionSetting: Ritech=@PrintoutMode
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: Ritech=FromPrintoutMode --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%BeginFeature: *TonerSave FromPrintoutMode
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: TonerSave=FromPrintoutMode --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %% FoomaticRIPOptionSetting: TonerSave=@PrintoutMode
D [09/Jul/2004:12:34:22 +0200] [Job 10] Option: TonerSave=FromPrintoutMode --> Setting option
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found: %%EndSetup
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] -----------
D [09/Jul/2004:12:34:22 +0200] [Job 10] New page: 1 1
D [09/Jul/2004:12:34:22 +0200] [Job 10] Inserting option code into "PageSetup" section.
D [09/Jul/2004:12:34:22 +0200] [Job 10] No page header or page header not DSC-conforming
D [09/Jul/2004:12:34:22 +0200] [Job 10] Stopping search for page header options
D [09/Jul/2004:12:34:22 +0200] [Job 10] Found:
D [09/Jul/2004:12:34:22 +0200] [Job 10] pageHeight sub % Move down...
D [09/Jul/2004:12:34:22 +0200] [Job 10] --> Output goes directly to the renderer now.
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] Starting renderer
D [09/Jul/2004:12:34:22 +0200] [Job 10] JCL: <job data>
D [09/Jul/2004:12:34:22 +0200] [Job 10]
D [09/Jul/2004:12:34:22 +0200] [Job 10] renderer PID kid4=4111
D [09/Jul/2004:12:34:22 +0200] [Job 10] renderer command: gs -q -dBATCH -dSAFER -dNOPAUSE -sProcessColorModel=DeviceGray -dBitsPerSample=1 -sDEVICE=ijs -sIjsServer=ijs_server_epsonepl -dIjsUseOutputFD -sDeviceManufacturer=Epson -sDeviceModel=EPL5900L -sIjsParams="EplFlowControl=off,EplDpi=600,EplDensity=3,EplRite ch=on,EplTonerSave=off," -sOutputFile=- -
D [09/Jul/2004:12:34:22 +0200] [Job 10] foomatic-gswrapper: gs '-dBATCH' '-dSAFER' '-dNOPAUSE' '-sProcessColorModel=DeviceGray' '-dBitsPerSample=1' '-sDEVICE=ijs' '-sIjsServer=ijs_server_epsonepl' '-dIjsUseOutputFD' '-sDeviceManufacturer=Epson' '-sDeviceModel=EPL5900L' '-sIjsParams=EplFlowControl=off,EplDpi=600,EplDensit y=3,EplRitech=on,EplTonerSave=off,' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
D [09/Jul/2004:12:34:23 +0200] [Job 10] ESP Ghostscript 7.07 (2003-07-12)
D [09/Jul/2004:12:34:23 +0200] [Job 10] Copyright 2003 artofcode LLC and Easy Software Products, all rights reserved.
D [09/Jul/2004:12:34:23 +0200] [Job 10] This software comes with NO WARRANTY: see the file COPYING for details.
D [09/Jul/2004:12:34:23 +0200] [Job 10] sh: line 1: ijs_server_epsonepl: command not found
D [09/Jul/2004:12:34:23 +0200] [Job 10] ESP Ghostscript 7.07.1: Can't start ijs server "ijs_server_epsonepl"
D [09/Jul/2004:12:34:23 +0200] [Job 10] **** Unable to open the initial device, quitting.
D [09/Jul/2004:12:34:23 +0200] [Job 10] renderer return value: 1
D [09/Jul/2004:12:34:23 +0200] [Job 10] renderer received signal: 1
D [09/Jul/2004:12:34:23 +0200] [Job 10] tail process done writing data to STDOUT
D [09/Jul/2004:12:34:23 +0200] [Job 10] KID4 finished
D [09/Jul/2004:12:34:23 +0200] [Job 10] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jul/2004:12:34:23 +0200] [Job 10] Possible error on renderer command line or PostScript error. Check options.
D [09/Jul/2004:12:34:23 +0200] [Job 10]
D [09/Jul/2004:12:34:23 +0200] [Job 10] Closing renderer
D [09/Jul/2004:12:34:23 +0200] [Job 10] KID4 exited with status 0
D [09/Jul/2004:12:34:23 +0200] [Job 10] KID3 exited with status 3
D [09/Jul/2004:12:34:23 +0200] [Job 10] Renderer exit stat: 3
D [09/Jul/2004:12:34:23 +0200] [Job 10] Renderer process finished
D [09/Jul/2004:12:34:23 +0200] [Job 10] Killing process 4110 (KID3)
D [09/Jul/2004:12:34:23 +0200] [Job 10] Process dying with "Error closing renderer", exit stat: 3
D [09/Jul/2004:12:34:23 +0200] [Job 10] Error closing renderer
E [09/Jul/2004:12:34:23 +0200] PID 4108 stopped with status 3!
D [09/Jul/2004:12:34:23 +0200] UpdateJob: job 10, file 0 is complete.
D [09/Jul/2004:12:34:23 +0200] CancelJob: id = 10
D [09/Jul/2004:12:34:23 +0200] StopJob: id = 10, force = 0
D [09/Jul/2004:12:34:23 +0200] StopJob: printer state is 3
D [09/Jul/2004:12:39:23 +0200] Closing client 5 after 300 seconds of inactivity...
D [09/Jul/2004:12:39:23 +0200] CloseClient() 5



Ich habe leider im Forum oder bei Google nicht das passende gefunden.

Gruß Malte[QUOTE]

`kk
09.07.04, 16:29
Hast du ohci bzw. uhci im Kernel bzw geladen? oO