PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : vsftpd hängt beim einloggen



dumpfbacke
10.06.04, 08:43
Morgaaannn,

Ich habe ein Problem mit meinem FTP Server in der Firma. Von einem Tag auf den Anderen kann ich mich nicht mehr einloggen. Der FTP ist ein öffentlicher im Firmennetz. Es kann jeder rauf. Das Komische ist das alle Windows Rechner rauf kommen aber ich mit Fedora Core 2 nicht.

Hier die Log Datei von IglooFTP:


LOCAL INF : Connecting to 192.168.21.4 (192.168.21.4) on Port 21. Try #1 ... LOCAL INF :
Connected to FTP server. Waiting for welcome message ...
HOST RPL : 220 (vsFTPd 1.2.0) LOCAL CMD : USER anonymous HOST
RPL : 331 Please specify the password. LOCAL CMD : PASS xxxxxxxxxxxxxxxxxxxxxxxx
LOCAL INF : Login successful. LOCAL CMD : SYST HOST RPL : 215 UNIX
Type: L8 LOCAL INF : Setting host type to UNIX LOCAL CMD : REST 100
HOST RPL : 350 Restart position accepted (100). LOCAL CMD : REST 0
HOST RPL : 350 Restart position accepted (0). LOCAL CMD : PWD
HOST RPL : 257 "/" LOCAL CMD :
PASV HOST RPL : 227 Entering Passive Mode (192,168,21,4,156,71)
LOCAL DBG : Unable to connect to data socket Keine Route zum Zielrechner
LOCAL CMD : TYPE A HOST RPL : 200 Switching to ASCII mode.
LOCAL CMD : LIST -a LOCAL DBG :
TIMEOUT (socket read). LOCAL DBG : Unable to get host reply.
LOCAL DBG : LIST command failed.
LOCAL DBG : Lost connexion to 192.168.21.4 LOCAL INF : Disconnected. --- LOG CLOSED.

Und die vsftpd.conf :


# Example config file /etc/vsftpd.conf #
# The default compiled in settings are very paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable. #
# Allow anonymous FTP? anonymous_enable=YES #
# Uncomment this to allow local users to log in. local_enable=YES #
# Uncomment this to enable any form of FTP write command. write_enable=YES #
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's) local_umask=022 anon_umask=022 #
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user. anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES anon_other_write_enable=YES
#
#Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
#Activate logging of uploads/downloads. xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below. #xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format #xferlog_std_format=YES
#
# You may change the default value for timing out an idle session. #idle_session_timeout=600
#
# You may change the default value for timing out a data connection. #data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in # ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway.. ascii_upload_enable=YES ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
#You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
#You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES pam_service_name=vsftpd userlist_enable=YES #enable for standalone mode listen=YES tcp_wrappers=YES

Hat einer eine Idee an was das liegen könnte :(

MFG.

Edit:

Da die Logs schlecht zu erkennen sind hier mal ein auszug der besser zu Lesen ist:

Switching to ASCII mode. LOCAL CMD : LIST -a LOCAL DBG : TIMEOUT (socket read). LOCAL DBG : Unable to get host reply. LOCAL DBG : LIST command failed.

Er hängt also immer sobald er den Innhalt anzeigen will. Der Login klappt ohne Probleme.

MFG.

Harry
10.06.04, 08:56
Hi,

hast Du es schonmal mit einem anderen FTP-Client versucht?

PS: Die Angaben im Log- und Conf-File kann man so nicht wirklich gut debuggen; da fehlen die Zeilenumbrüche zur Lesbarkeit.

Harry

dumpfbacke
10.06.04, 09:04
Ich habe jetzt mal alle zeilenumbrüche reingemacht.

Wenn ich mich über die Konsole einlogge funzt dat auch nicht:


ftp> open 192.168.21.4
Connected to 192.168.21.4 (192.168.21.4). 220 (vsFTPd 1.2.0)
Name (192.168.21.4:root): anonymous
331 Please specify the password.
Password: 230 Login successful.
Remote system type is UNIX. Using binary mode to transfer files.
ftp> cd pub 250 Directory successfully changed.
ftp> dir 227 Entering Passive Mode (192,168,21,4,78,89)
ftp: connect: No route to host
ftp>

Also auch hier funktioniert das einloggen aber beim aufruf des Inhaltest kommt der Fehler.

MFG.

Jinto
10.06.04, 09:10
schalte deinen Paketfilter ab bzw. konfigurier ihn um.

dumpfbacke
10.06.04, 09:14
Die Firewall habe ich eben mal komplett ausgeschaltet aber es ist immer noch das selbe :(

MFG.

Harry
10.06.04, 09:28
Tja - ich hätte nun auch darauf getippt, dass Du beim Versuch, den Datenkanal aufzubauen, ein REJECT bekommst - also Paketfilter.

Harry

iceface
10.06.04, 09:34
Zu dem Problem ist das Netz voll mit Firewall und NAT Lösungen.

Wenn das bei Dir nicht hilft - vielleicht hat der Server ein Problem.

Evtl. mal neu starten.

dumpfbacke
10.06.04, 09:45
Ich habe den Server jetzt neu gestartet und siehe da es funktioniert wieder :eek:

Ich dachte eigentlich es heißt nur bei Windof jeder Boot tut gut.

Vielen Dank an alle die geholfen haben :)

MFG.

iceface
10.06.04, 09:47
Neustarten behebt aber das eigentliche Problem nicht!

Vielleicht den Server mal updaten?

dumpfbacke
10.06.04, 10:01
Ja das dachte ich mir auch. Bin gerade dabei ihn upzudaten :)

MFG.