Shutdown
13.05.04, 16:05
Hi,
ich benutze seit kurzem X.org und habe es nicht geschafft, mein Mausrad zum Funktionieren zu bewegen.
Mit XF86 habe ich es allerdings auch nicht geschafft.
In meiner Config habe ich allerdings auch 2 Stellen mit Mauseinträgen gefunden; einmal die hier:
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# Option "Protocol" "Logitech"
# The mouse device. The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
und die hier am Schluss:
Section "InputDevice"
Identifier "Keyboard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Driver "keyboard"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse"
Option "Device" "/dev/usbmouse"
Option "Name" "Autodetection"
Option "Protocol" "Auto"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Hat jemand eine Idee was ich da machen soll? Einen der Einträge löschen? Und wie kriege ich mein Mausrad zum Laufen?
Danke schonmal,
Shutdown
ich benutze seit kurzem X.org und habe es nicht geschafft, mein Mausrad zum Funktionieren zu bewegen.
Mit XF86 habe ich es allerdings auch nicht geschafft.
In meiner Config habe ich allerdings auch 2 Stellen mit Mauseinträgen gefunden; einmal die hier:
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# Option "Protocol" "Logitech"
# The mouse device. The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
und die hier am Schluss:
Section "InputDevice"
Identifier "Keyboard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Driver "keyboard"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse"
Option "Device" "/dev/usbmouse"
Option "Name" "Autodetection"
Option "Protocol" "Auto"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Hat jemand eine Idee was ich da machen soll? Einen der Einträge löschen? Und wie kriege ich mein Mausrad zum Laufen?
Danke schonmal,
Shutdown