hoagie
27.03.04, 12:58
hallo liebe linuxforer
ich hab hier da so ein problem mit meinem bild.
also ich hab einen xga 15zoll bildschirm und eine
gforce 5600 FX go. ich habe den 2.6.4er selber
compilt und die .run von nvidia.com ausgeführt.
bei allem kamen keine fehler. wenn ich jetzt X starte
klappt auch alles wunderbar. nur ab und zu kommt
so eine komische störung. da kommt dann für eine
millisekunde irgendwie so eine art schnee. halt ein
frame was irgendwie kaput iss. sonst kommen keine
fehler. das problem tritt alleine auf ohne dass ich was
mache aber am häufigsten wenn ich über einen
button oder über einen link fahre. bei google finde
ich keine lösung für mein problem.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 31-60
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
das ist mein xf86config. an der hardware kann es ausserdem nicht liegen,
weil in windows klappts ;)
hat jemand von euch eine idee wie ich mein problem gelöst bekomme?
ich hab hier da so ein problem mit meinem bild.
also ich hab einen xga 15zoll bildschirm und eine
gforce 5600 FX go. ich habe den 2.6.4er selber
compilt und die .run von nvidia.com ausgeführt.
bei allem kamen keine fehler. wenn ich jetzt X starte
klappt auch alles wunderbar. nur ab und zu kommt
so eine komische störung. da kommt dann für eine
millisekunde irgendwie so eine art schnee. halt ein
frame was irgendwie kaput iss. sonst kommen keine
fehler. das problem tritt alleine auf ohne dass ich was
mache aber am häufigsten wenn ich über einen
button oder über einen link fahre. bei google finde
ich keine lösung für mein problem.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 31-60
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
das ist mein xf86config. an der hardware kann es ausserdem nicht liegen,
weil in windows klappts ;)
hat jemand von euch eine idee wie ich mein problem gelöst bekomme?