mnt
08.03.04, 19:44
hi
ich habe meine wlankarte in den Ad-Hoc modus geschalten und versucht ein netzwerk aufzubauen
es hat aber nicht funktioniert! habe danach neugestartet und wollte die karte wieder mit wlcardconfig in den Managed modus
schalten... die karte wurde danach aber nicht mehr gefunden! auch nicht nach dem mehrmaligen ein und ausschieben der karte.
das licht an der pcmcia karte leuchtet zwar immer aber finden kann man sie nicht!
ausgabe von "ifconfig eth1 up":
SIOCSIFFLAGS: Eingabe-/Ausgabefehler
ausgabe von "iwconfig":
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11-DS ESSID:"" Nickname:"MNT"
Mode:Ad-Hoc Bit Rate:11Mb/s Tx-Power=15 dBm
RTS thr:off
Encryption key:off
habe danach versucht kismet zu starten und es kam folgende meldung:
kismet
Server options: none
Client options: none
Entering monitor mode...
Setting interface from //etc/kismet/kismet.conf capinterface
Setting card type from //etc/kismet/kismet.conf cardtype
Enabling monitor mode for an orinoco card on eth1 channel 6
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
SIOCSIFFLAGS: Eingabe-/Ausgabefehler
Starting channel hopper...
Starting server...
Hopping 3 channels per second (333333 microseconds per channel)
kismet_hopper - Channel hopping (United States) on interface eth1 as a orinoco card.
NOTICE: Suid priv-dropping disabled. This may not be secure.
Using pcap to capture packets from eth1
FATAL: bind: Network is down
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Starting UI...
FATAL: Could not connect to localhost:2501.
Killing server...
/usr/bin/kismet: line 73: kill: (961) - Kein passender Prozess gefunden
Terminating...
Shutting down kismet_hopper...
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Detected killfile /tmp/kismet_hopper.control
kismet_hopper shutting down.
Leaving monitor mode...
Setting interface from //etc/kismet/kismet.conf capinterface
Setting card type from //etc/kismet/kismet.conf cardtype
Disabling monitor mode for an orinoco card on eth1
Interface doesn't accept private ioctl...
monitor (8BE8): Device or resource busy
SIOCSIFFLAGS: Eingabe-/Ausgabefehler
You will likely need to restart your PCMCIA services to reconfigure your card
for the correct channel and SSID.
Done.
was ist mein problem und was kann ich tun damit meine karte wieder funktioniert?????
bitte helft mir!
ich habe meine wlankarte in den Ad-Hoc modus geschalten und versucht ein netzwerk aufzubauen
es hat aber nicht funktioniert! habe danach neugestartet und wollte die karte wieder mit wlcardconfig in den Managed modus
schalten... die karte wurde danach aber nicht mehr gefunden! auch nicht nach dem mehrmaligen ein und ausschieben der karte.
das licht an der pcmcia karte leuchtet zwar immer aber finden kann man sie nicht!
ausgabe von "ifconfig eth1 up":
SIOCSIFFLAGS: Eingabe-/Ausgabefehler
ausgabe von "iwconfig":
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11-DS ESSID:"" Nickname:"MNT"
Mode:Ad-Hoc Bit Rate:11Mb/s Tx-Power=15 dBm
RTS thr:off
Encryption key:off
habe danach versucht kismet zu starten und es kam folgende meldung:
kismet
Server options: none
Client options: none
Entering monitor mode...
Setting interface from //etc/kismet/kismet.conf capinterface
Setting card type from //etc/kismet/kismet.conf cardtype
Enabling monitor mode for an orinoco card on eth1 channel 6
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
SIOCSIFFLAGS: Eingabe-/Ausgabefehler
Starting channel hopper...
Starting server...
Hopping 3 channels per second (333333 microseconds per channel)
kismet_hopper - Channel hopping (United States) on interface eth1 as a orinoco card.
NOTICE: Suid priv-dropping disabled. This may not be secure.
Using pcap to capture packets from eth1
FATAL: bind: Network is down
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Starting UI...
FATAL: Could not connect to localhost:2501.
Killing server...
/usr/bin/kismet: line 73: kill: (961) - Kein passender Prozess gefunden
Terminating...
Shutting down kismet_hopper...
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Interface doesn't accept private ioctl...
monitor (8BE8): Input/output error
Detected killfile /tmp/kismet_hopper.control
kismet_hopper shutting down.
Leaving monitor mode...
Setting interface from //etc/kismet/kismet.conf capinterface
Setting card type from //etc/kismet/kismet.conf cardtype
Disabling monitor mode for an orinoco card on eth1
Interface doesn't accept private ioctl...
monitor (8BE8): Device or resource busy
SIOCSIFFLAGS: Eingabe-/Ausgabefehler
You will likely need to restart your PCMCIA services to reconfigure your card
for the correct channel and SSID.
Done.
was ist mein problem und was kann ich tun damit meine karte wieder funktioniert?????
bitte helft mir!