Hotspott
21.02.04, 03:04
Hi!
Ich benutzte Debian/testing und versuche nun schon ein paar Std verzweifelt apt-proxy zum
laufen zu bekommen.
Ich bekomme immer wieder
connect (111 Connection refused)
Hab auch in der faq gelesen, dass das an der hosts.deny bzw. hosts.allow liegen koennte.
Glaub ich bei mir allerdings nicht. Hab sowohl mit den beiden Datein leer probiert, als auch
ALL: ALL in hosts.allow und noch einige Kombinationene durchgespielt. Weiss nicht ob man
die Datein neu laden muss. Hab einfach init 1 und dann normal startup gemacht bzw. init 6
Ich glaube gerade deswegen, dass es nicht daran liegt, weil selbst wenn ich auf dem Rechner
auf dem apt-proxy laufen soll diesen in die apt/soure.list eintrage den fehler bekomme.
Und auf sich selbst sollte er ja wohl zugreifen koennen.
nmap listet fuer den port 9999 nix.
Was mich auch stutzig macht: Ich habe gelesen, dass apt-proxy nicht von root ausgefuehrt werden
sollte, aber das verzeichniss /var/cache/apt-proxy gehoert nur root und andere duerfen nur lesend
darauf zugreifen.
Hier haenge ich noch mal meine apt-proxy.conf an. Hab wirklich keine Ahnung was ich verbock
und schmeiss hier vor Wut schon Zeugs durch die Gegend :)
# Configuration for apt-proxy
# Change this path if you do not want to keep your cache under var
APT_PROXY_CACHE=/var/cache/apt-proxy
### Rsync Backends
# Three or more fields each:
# 1) URL prefix
# 2) Dir to put files in (remember the trailing /!)
# 3...) http/ftp/rsync backends to replace it with (remember the trailing /!)
# You can specify multiple backends like this example:
#add_backend /debian/ \
# $APT_PROXY_CACHE/debian/ \
# http://SERVERONE/debian/ \
# http://SERVERTWO/debian/ \
# HINT: Any request matching none of these is not served, making
# partial caching easy.
#
# You can also specify a different backend for control files
# by prefixing with a '+'. This is particularly useful for
# using rsync for Packages and http/ftp for .deb/.tar.gzs
#
# This is a shell script and the backslashes at the end of
# the line denote that the line continues on the next line,
# so do not try to comment out one line without moving it!
#
# The 'deb' lines are examples that you can place in clients'
# sources.list that correspond to the apt-proxy backends.
# Debian main
#deb http://APTPROXY:9999/debian stable main contrib non-free
#deb http://APTPROXY:9999/debian woody main contrib non-free
#deb http://APTPROXY:9999/debian sarge main contrib non-free
#deb http://APTPROXY:9999/debian sid main contrib non-free
#deb http://APTPROXY:9999/debian project/experimental/main/binary-$(ARCH)/
add_backend /debian/ \
$APT_PROXY_CACHE/debian/ \
http://ftp.de.debian.org/debian/ \
http://ftp.uk.debian.org/debian/ \
http://ftp.us.debian.org/debian/ \
+ftp.us.debian.org::debian/
# Debian non-US
#deb http://APTPROXY:9999/non-US stable/non-US main contrib non-free
#deb http://APTPROXY:9999/non-US woody/non-US main contrib non-free
#deb http://APTPROXY:9999/non-US sarge/non-US main contrib non-free
#deb http://APTPROXY:9999/non-US sid/non-US main contrib non-free
add_backend /non-US/ \
$APT_PROXY_CACHE/non-US/ \
http://ftp.de.debian.org/debian-non-US/ \
http://ftp.uk.debian.org/debian-non-US/ \
http://non-us.debian.org/ \
+ftp.de.debian.org::debian-non-US/
# Debian security
#deb http://APTPROXY:9999/security stable/updates main contrib non-free
#deb http://APTPROXY:9999/security woody/updates main contrib non-free
#deb http://APTPROXY:9999/security sarge/updates main contrib non-free
add_backend /security/ \
$APT_PROXY_CACHE/security/ \
http://security.debian.org/
# Here are some more examples:
#
#Emdebian project
# add_backend /emdebian/ \
# $APT_PROXY_CACHE/emdebian/ \
# http://emdebian.sourceforge.net/emdebian/
#
#Blackdown jave
# add_backend /blackdown/ \
# $APT_PROXY_CACHE/blackdown/ \
# http://ftp.gwdg.de/pub/languages/java/linux/debian/
#
#apt-proxy repository
# see: http://apt-proxy.sourceforge.net/apt-proxy/README
# add_backend /apt-proxy/ \
# $APT_PROXY_CACHE/apt-proxy/ \
# http://apt-proxy.sourceforge.net/apt-proxy/
#
# openoffice.org packages
#deb http://APTPROXY:9999/openoffice unstable main contrib
#add_backend /openoffice/ $APT_PROXY_CACHE/openoffice/ http://openoffice.vpn-junkies.de/openoffice/
# KDE3
# deb http://APTPROXY:9999/kde3 /
#add_backend /kde3/ $APT_PROXY_CACHE/kde/ http://kde3.geniussystems.net/debian/
# people.debian.org
#deb http://shawnaptproxy:8000/debian-people/~njordan kde3.0/
#add_backend /debian-people/ $APT_PROXY_CACHE/people/ http://people.debian.org/
# Chain several apt-proxies together by forwarding all requests to another
# apt-proxy.
#for I in debian non-US security openoffice ; do
# add_backend /$I/ \
# $APT_PROXY_CACHE/$I/ \
# http://OTHERHOST:9999/$I/
#done
############################## OTHER VARS ##################################
# Automatically delete old debs when we download a newer one
# after this many days of the older not being accessed.
# Comment out to avoid, set to 0 for `instantly' (not recommended;
# sometimes the new versions are broken
CLEANUP_DAYS=14
# Once every n days, look through tree to erase any debs which
# haven't been accessed in that long (eg. obsolete, rarely used, etc).
# Comment out to disable.
# CLEAN_SWEEP=60
# Maximum number of versions of each package to keep in cache
# directory. Version purging is carried out immediately after a new
# version is downloaded.
# Comment out to disable.
MAX_VERSIONS=2
# Maximum frequency of Packages/etc. updates from back end (minutes)
# Keep high to speed things up.
BACKEND_FREQ=240
# Number of seconds for rsync to wait before timing out.
RSYNC_TIMEOUT=30
# Number of seconds for wget to wait to connect before timing out.
WGET_TIMEOUT=30
# Uncomment to change the path to wget, or add extra options. For
# example, if you are behind a firewall that does not allow active
# FTP, use WGET="wget --passive-ftp"
#WGET=wget
# Uncomment to change the path to rsync or add extra options.
#RSYNC=rsync
# Uncomment to keep stats of successful backend transfers in the log.
#KEEP_STATS=1
# Uncomment this for debugging messages
#DEBUG=true
# HTTP/FTP proxy: apt-proxy uses wget to retreive files. Wget uses
# the http_proxy and ftp_proxy environment variables, which can be set
# like this:
#export http_proxy=http://proxy:8080/
#export ftp_proxy=http://proxy:8080/
Ich benutzte Debian/testing und versuche nun schon ein paar Std verzweifelt apt-proxy zum
laufen zu bekommen.
Ich bekomme immer wieder
connect (111 Connection refused)
Hab auch in der faq gelesen, dass das an der hosts.deny bzw. hosts.allow liegen koennte.
Glaub ich bei mir allerdings nicht. Hab sowohl mit den beiden Datein leer probiert, als auch
ALL: ALL in hosts.allow und noch einige Kombinationene durchgespielt. Weiss nicht ob man
die Datein neu laden muss. Hab einfach init 1 und dann normal startup gemacht bzw. init 6
Ich glaube gerade deswegen, dass es nicht daran liegt, weil selbst wenn ich auf dem Rechner
auf dem apt-proxy laufen soll diesen in die apt/soure.list eintrage den fehler bekomme.
Und auf sich selbst sollte er ja wohl zugreifen koennen.
nmap listet fuer den port 9999 nix.
Was mich auch stutzig macht: Ich habe gelesen, dass apt-proxy nicht von root ausgefuehrt werden
sollte, aber das verzeichniss /var/cache/apt-proxy gehoert nur root und andere duerfen nur lesend
darauf zugreifen.
Hier haenge ich noch mal meine apt-proxy.conf an. Hab wirklich keine Ahnung was ich verbock
und schmeiss hier vor Wut schon Zeugs durch die Gegend :)
# Configuration for apt-proxy
# Change this path if you do not want to keep your cache under var
APT_PROXY_CACHE=/var/cache/apt-proxy
### Rsync Backends
# Three or more fields each:
# 1) URL prefix
# 2) Dir to put files in (remember the trailing /!)
# 3...) http/ftp/rsync backends to replace it with (remember the trailing /!)
# You can specify multiple backends like this example:
#add_backend /debian/ \
# $APT_PROXY_CACHE/debian/ \
# http://SERVERONE/debian/ \
# http://SERVERTWO/debian/ \
# HINT: Any request matching none of these is not served, making
# partial caching easy.
#
# You can also specify a different backend for control files
# by prefixing with a '+'. This is particularly useful for
# using rsync for Packages and http/ftp for .deb/.tar.gzs
#
# This is a shell script and the backslashes at the end of
# the line denote that the line continues on the next line,
# so do not try to comment out one line without moving it!
#
# The 'deb' lines are examples that you can place in clients'
# sources.list that correspond to the apt-proxy backends.
# Debian main
#deb http://APTPROXY:9999/debian stable main contrib non-free
#deb http://APTPROXY:9999/debian woody main contrib non-free
#deb http://APTPROXY:9999/debian sarge main contrib non-free
#deb http://APTPROXY:9999/debian sid main contrib non-free
#deb http://APTPROXY:9999/debian project/experimental/main/binary-$(ARCH)/
add_backend /debian/ \
$APT_PROXY_CACHE/debian/ \
http://ftp.de.debian.org/debian/ \
http://ftp.uk.debian.org/debian/ \
http://ftp.us.debian.org/debian/ \
+ftp.us.debian.org::debian/
# Debian non-US
#deb http://APTPROXY:9999/non-US stable/non-US main contrib non-free
#deb http://APTPROXY:9999/non-US woody/non-US main contrib non-free
#deb http://APTPROXY:9999/non-US sarge/non-US main contrib non-free
#deb http://APTPROXY:9999/non-US sid/non-US main contrib non-free
add_backend /non-US/ \
$APT_PROXY_CACHE/non-US/ \
http://ftp.de.debian.org/debian-non-US/ \
http://ftp.uk.debian.org/debian-non-US/ \
http://non-us.debian.org/ \
+ftp.de.debian.org::debian-non-US/
# Debian security
#deb http://APTPROXY:9999/security stable/updates main contrib non-free
#deb http://APTPROXY:9999/security woody/updates main contrib non-free
#deb http://APTPROXY:9999/security sarge/updates main contrib non-free
add_backend /security/ \
$APT_PROXY_CACHE/security/ \
http://security.debian.org/
# Here are some more examples:
#
#Emdebian project
# add_backend /emdebian/ \
# $APT_PROXY_CACHE/emdebian/ \
# http://emdebian.sourceforge.net/emdebian/
#
#Blackdown jave
# add_backend /blackdown/ \
# $APT_PROXY_CACHE/blackdown/ \
# http://ftp.gwdg.de/pub/languages/java/linux/debian/
#
#apt-proxy repository
# see: http://apt-proxy.sourceforge.net/apt-proxy/README
# add_backend /apt-proxy/ \
# $APT_PROXY_CACHE/apt-proxy/ \
# http://apt-proxy.sourceforge.net/apt-proxy/
#
# openoffice.org packages
#deb http://APTPROXY:9999/openoffice unstable main contrib
#add_backend /openoffice/ $APT_PROXY_CACHE/openoffice/ http://openoffice.vpn-junkies.de/openoffice/
# KDE3
# deb http://APTPROXY:9999/kde3 /
#add_backend /kde3/ $APT_PROXY_CACHE/kde/ http://kde3.geniussystems.net/debian/
# people.debian.org
#deb http://shawnaptproxy:8000/debian-people/~njordan kde3.0/
#add_backend /debian-people/ $APT_PROXY_CACHE/people/ http://people.debian.org/
# Chain several apt-proxies together by forwarding all requests to another
# apt-proxy.
#for I in debian non-US security openoffice ; do
# add_backend /$I/ \
# $APT_PROXY_CACHE/$I/ \
# http://OTHERHOST:9999/$I/
#done
############################## OTHER VARS ##################################
# Automatically delete old debs when we download a newer one
# after this many days of the older not being accessed.
# Comment out to avoid, set to 0 for `instantly' (not recommended;
# sometimes the new versions are broken
CLEANUP_DAYS=14
# Once every n days, look through tree to erase any debs which
# haven't been accessed in that long (eg. obsolete, rarely used, etc).
# Comment out to disable.
# CLEAN_SWEEP=60
# Maximum number of versions of each package to keep in cache
# directory. Version purging is carried out immediately after a new
# version is downloaded.
# Comment out to disable.
MAX_VERSIONS=2
# Maximum frequency of Packages/etc. updates from back end (minutes)
# Keep high to speed things up.
BACKEND_FREQ=240
# Number of seconds for rsync to wait before timing out.
RSYNC_TIMEOUT=30
# Number of seconds for wget to wait to connect before timing out.
WGET_TIMEOUT=30
# Uncomment to change the path to wget, or add extra options. For
# example, if you are behind a firewall that does not allow active
# FTP, use WGET="wget --passive-ftp"
#WGET=wget
# Uncomment to change the path to rsync or add extra options.
#RSYNC=rsync
# Uncomment to keep stats of successful backend transfers in the log.
#KEEP_STATS=1
# Uncomment this for debugging messages
#DEBUG=true
# HTTP/FTP proxy: apt-proxy uses wget to retreive files. Wget uses
# the http_proxy and ftp_proxy environment variables, which can be set
# like this:
#export http_proxy=http://proxy:8080/
#export ftp_proxy=http://proxy:8080/