mactini
11.02.04, 14:46
System RedHat 7.3:
Gerät boot. Anfang Ende Blöcke Id Dateisystemtyp
/dev/hdc1 1 963 7735266 fd Linux raid autodetect
/dev/hdc2 964 1027 514080 fd Linux raid autodetect
Festplatte /dev/hda: 255 Köpfe, 63 Sektoren, 1027 Zylinder
Einheiten: Zylinder mit 16065 * 512 Bytes
Gerät boot. Anfang Ende Blöcke Id Dateisystemtyp
/dev/hda1 * 1 963 7735266 83 Linux
/dev/hda2 964 1027 514080 82 Linux Swap
Habe nu eine 2 platte eingebaut und möchte ein Raid 1 aufsetzen um Ausfall zu sichern (DNS/ Proxy).
Wie muss die raidtab aussehen.
hda soll nach hdc gespiegelt werden.
ich glaube mein raid set ist nicht richtig
(/etc/mdstat)
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 hdc2[1] hdc1[0]
513984 blocks [2/2] [UU]
Was wird denn hier gespiegelt
unused devices: <none>
Gerät boot. Anfang Ende Blöcke Id Dateisystemtyp
/dev/hdc1 1 963 7735266 fd Linux raid autodetect
/dev/hdc2 964 1027 514080 fd Linux raid autodetect
Festplatte /dev/hda: 255 Köpfe, 63 Sektoren, 1027 Zylinder
Einheiten: Zylinder mit 16065 * 512 Bytes
Gerät boot. Anfang Ende Blöcke Id Dateisystemtyp
/dev/hda1 * 1 963 7735266 83 Linux
/dev/hda2 964 1027 514080 82 Linux Swap
Habe nu eine 2 platte eingebaut und möchte ein Raid 1 aufsetzen um Ausfall zu sichern (DNS/ Proxy).
Wie muss die raidtab aussehen.
hda soll nach hdc gespiegelt werden.
ich glaube mein raid set ist nicht richtig
(/etc/mdstat)
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 hdc2[1] hdc1[0]
513984 blocks [2/2] [UU]
Was wird denn hier gespiegelt
unused devices: <none>