sleon
26.12.03, 20:46
ich habe eine dlink karte und 2.4.23 kernel in meinem rechner.
Ab und zu bekomme ich folgende fehlermeldung:
Dec 26 19:45:49 turbotux kernel: eth0: Too much work at interrupt, status=0x00000001.
Dann geht kein netzwerk mehr, obwohl physische verbindung besteht.
Hier sind daten des systems:
root@turbotux:/var/log# uname -a
Linux turbotux 2.4.23 #13 Thu Dec 25 16:44:35 CET 2003 i586 GNU/Linux
root@turbotux:/var/log# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 3).
Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 1).
Bus 0, device 7, function 1:
IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] (rev 0).
Master Capable. Latency=32.
I/O at 0xf000 [0xf00f].
Bus 0, device 15, function 0:
VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 0).
IRQ 11.
Non-prefetchable 32 bit memory at 0xe0000000 [0xe07fffff].
Bus 0, device 16, function 0:
Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 3).
IRQ 9.
Master Capable. Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0x6100 [0x6107].
I/O at 0x6200 [0x6203].
I/O at 0x6300 [0x6307].
I/O at 0x6400 [0x6403].
I/O at 0x6500 [0x65ff].
Bus 0, device 17, function 0:
Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 67).
IRQ 5.
Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0x6600 [0x66ff].
Non-prefetchable 32 bit memory at 0xe0800000 [0xe08000ff].
root@turbotux:/var/log# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(set)
0300-030f : 3c509
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
6100-6107 : Triones Technologies, Inc. HPT366/368/370/370A/372
6200-6203 : Triones Technologies, Inc. HPT366/368/370/370A/372
6300-6307 : Triones Technologies, Inc. HPT366/368/370/370A/372
6400-6403 : Triones Technologies, Inc. HPT366/368/370/370A/372
6500-65ff : Triones Technologies, Inc. HPT366/368/370/370A/372
6600-66ff : VIA Technologies, Inc. VT6102 [Rhine-II]
6600-66ff : via-rhine
f000-f00f : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
f000-f007 : ide0
f008-f00f : ide1
root@turbotux:/var/log# cat /proc/interrupts
CPU0
0: 252913 XT-PIC timer
1: 72 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 16485 XT-PIC eth0
8: 4 XT-PIC rtc
9: 4135 XT-PIC hpt37x2
10: 5676 XT-PIC eth1
14: 10593 XT-PIC ide0
NMI: 0
ERR: 0
Ab und zu bekomme ich folgende fehlermeldung:
Dec 26 19:45:49 turbotux kernel: eth0: Too much work at interrupt, status=0x00000001.
Dann geht kein netzwerk mehr, obwohl physische verbindung besteht.
Hier sind daten des systems:
root@turbotux:/var/log# uname -a
Linux turbotux 2.4.23 #13 Thu Dec 25 16:44:35 CET 2003 i586 GNU/Linux
root@turbotux:/var/log# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 3).
Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 1).
Bus 0, device 7, function 1:
IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] (rev 0).
Master Capable. Latency=32.
I/O at 0xf000 [0xf00f].
Bus 0, device 15, function 0:
VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 0).
IRQ 11.
Non-prefetchable 32 bit memory at 0xe0000000 [0xe07fffff].
Bus 0, device 16, function 0:
Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 3).
IRQ 9.
Master Capable. Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0x6100 [0x6107].
I/O at 0x6200 [0x6203].
I/O at 0x6300 [0x6307].
I/O at 0x6400 [0x6403].
I/O at 0x6500 [0x65ff].
Bus 0, device 17, function 0:
Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 67).
IRQ 5.
Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0x6600 [0x66ff].
Non-prefetchable 32 bit memory at 0xe0800000 [0xe08000ff].
root@turbotux:/var/log# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(set)
0300-030f : 3c509
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
6100-6107 : Triones Technologies, Inc. HPT366/368/370/370A/372
6200-6203 : Triones Technologies, Inc. HPT366/368/370/370A/372
6300-6307 : Triones Technologies, Inc. HPT366/368/370/370A/372
6400-6403 : Triones Technologies, Inc. HPT366/368/370/370A/372
6500-65ff : Triones Technologies, Inc. HPT366/368/370/370A/372
6600-66ff : VIA Technologies, Inc. VT6102 [Rhine-II]
6600-66ff : via-rhine
f000-f00f : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
f000-f007 : ide0
f008-f00f : ide1
root@turbotux:/var/log# cat /proc/interrupts
CPU0
0: 252913 XT-PIC timer
1: 72 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 16485 XT-PIC eth0
8: 4 XT-PIC rtc
9: 4135 XT-PIC hpt37x2
10: 5676 XT-PIC eth1
14: 10593 XT-PIC ide0
NMI: 0
ERR: 0