JPMonti
14.12.03, 22:06
der sound von mpegs beinhaltet ein starkes schlieren, hört sich ganz so an, als wenn neben meinem ohr ein rinnsaal fliessen würde. dabei ist das nur ein nebenprodukt; der eigentliche sound ist voll da, nur halt mit diesem dummen schlieren dabei. bei divx oder so tritt das phänomen nicht auf.
kennt sich da jemand aus, obs an den einstellungen des sound servers liegt (ich nutze arts), oder ob der mplayer einen falschen treiber benutzt?
MPlayer 1.0pre3-3.3.1 (C) 2000-2003 MPlayer Team
CPU: Advanced Micro Devices Duron Spitfire 808.1 MHz (Family: 6, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx
Reading config file /usr/local/etc/mplayer/mplayer.conf: Datei oder Verzeichnis nicht gefunden
Reading config file /home/Pussykiller/.mplayer/config
[cfg] read config file: /home/Pussykiller/.mplayer/gui.conf
Reading config file /home/Pussykiller/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /home/Pussykiller/.mplayer/codecs.conf: Can't open '/home/Pussykiller/.mplayer/codecs.conf': Datei oder Verzeichnis nicht gefunden
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': Datei oder Verzeichnis nicht gefunden
Using built-in default codecs.conf.
font: can't open file: /home/Pussykiller/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Failed to open /dev/rtc: Das Gerät oder die Ressource ist belegt (mplayer should be setuid root or /dev/rtc should be readable by the user.)
Using usleep() timing
Can't open input config file /home/Pussykiller/.mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Can't open input config file /usr/local/etc/mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Falling back on default (hardcoded) input config
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: Verbindungsaufbau abgelehnt
Failed to open LIRC support.
You will not be able to use your remote control.
SKIN dir 1: '/home/Pussykiller/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
Playing /daten/Loges/movies/axe.mpeg.
LMLM4 Stream Format not found
MPEG-PS file format detected.
VIDEO: MPEG1 176x144 (aspect 8) 25,000 fps 253,6 kbps (31,7 kbyte/s)
================================================== ========================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 4000->176400 (32,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
================================================== ========================
Xv: could not grab port 78
================================================== ========================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 176 x 144 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
================================================== ========================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 176 x 144 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
VO: [xv] 176x144 => 192x144 Planar YV12
A: 6,6 V: 6,6 A-V: 0,005 ct: 0,079 156/156 3% 2% 0,6% 0 0 0%
Exiting... (Quit)
kennt sich da jemand aus, obs an den einstellungen des sound servers liegt (ich nutze arts), oder ob der mplayer einen falschen treiber benutzt?
MPlayer 1.0pre3-3.3.1 (C) 2000-2003 MPlayer Team
CPU: Advanced Micro Devices Duron Spitfire 808.1 MHz (Family: 6, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx
Reading config file /usr/local/etc/mplayer/mplayer.conf: Datei oder Verzeichnis nicht gefunden
Reading config file /home/Pussykiller/.mplayer/config
[cfg] read config file: /home/Pussykiller/.mplayer/gui.conf
Reading config file /home/Pussykiller/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /home/Pussykiller/.mplayer/codecs.conf: Can't open '/home/Pussykiller/.mplayer/codecs.conf': Datei oder Verzeichnis nicht gefunden
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': Datei oder Verzeichnis nicht gefunden
Using built-in default codecs.conf.
font: can't open file: /home/Pussykiller/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Failed to open /dev/rtc: Das Gerät oder die Ressource ist belegt (mplayer should be setuid root or /dev/rtc should be readable by the user.)
Using usleep() timing
Can't open input config file /home/Pussykiller/.mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Can't open input config file /usr/local/etc/mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Falling back on default (hardcoded) input config
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: Verbindungsaufbau abgelehnt
Failed to open LIRC support.
You will not be able to use your remote control.
SKIN dir 1: '/home/Pussykiller/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
Playing /daten/Loges/movies/axe.mpeg.
LMLM4 Stream Format not found
MPEG-PS file format detected.
VIDEO: MPEG1 176x144 (aspect 8) 25,000 fps 253,6 kbps (31,7 kbyte/s)
================================================== ========================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 4000->176400 (32,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
================================================== ========================
Xv: could not grab port 78
================================================== ========================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 176 x 144 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
================================================== ========================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 176 x 144 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
VO: [xv] 176x144 => 192x144 Planar YV12
A: 6,6 V: 6,6 A-V: 0,005 ct: 0,079 156/156 3% 2% 0,6% 0 0 0%
Exiting... (Quit)