zippelmann
29.11.03, 13:24
Ich versuche einen Kernel für mein Toshiba Satellite 2060CDS zu kompilieren. Wenn ich Knoppix starte, habe ich keine probs, d.h. die Hardware scheint linux fähig zu sein.
Es tritt immer der folgende Fehler auf, wenn ich den Kernel mit grub boote:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCi: No IRQ known for Interrupt pin A of device 00:13.0. Please try using pci=biosirq
PCi: No IRQ known for Interrupt pin A of device 00:13.1. Please try using pci=biosirq
Intel PCIC probe: not found.
Den Vorschlag in der Fehlermeldung habe ich ausprobiert, sowohl in der grub.conf, als auch im Kernel in dem ich pci auf [BIOS] gesetzt habe. Leider brachte das keinen Erfolg.
Nach einigen Forschungen habe ich herausgefunden, was in meinem Notebook steckt:
Model: Satellite 2060
HDD_Int: Toshiba
Sound: ESS ES 1978
VGA: S3 ViRGE/MX
CPU: AMD K6-2 366
RAM: SDRAM 66
Modem: Lucent DSP1646(Mars2)
USB: NEC OHCI
CD_Int: Toshiba
PCMCIA: Toshiba ToPIC97 (Intel 82365 comp)
APM: V1.2
Mouse: PS2
ACPI: V1.0
Chipset: Toshiba
FloppyDisk_Int: intern
Also habe ich nachgeguckt, ob ich denn auch den Intel 82365 angeschmissen hab, leider war der auch schon drin.
Vielleicht hilft ja meine Kernel config weiter:
CONFIG_X86=y
CONFIG_UID16=y
# Code maturity level options
CONFIG_EXPERIMENTAL=y
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
# Processor type and features
CONFIG_MK6=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_HAS_TSC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_MCE=y
CONFIG_TOSHIBA=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y
# General setup
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
CONFIG_PCI_BIOS=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
# PCMCIA/CardBus support
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
CONFIG_I82092=y
CONFIG_I82365=y
# PCI Hotplug Support
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
# ACPI Support
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_TOSHIBA=y
# Plug and Play configuration
CONFIG_PNP=y
CONFIG_ISAPNP=y
# Block devices
CONFIG_BLK_DEV_FD=y
# Networking options
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# ATA/IDE/MFM/RLL support
CONFIG_IDE=y
# IDE, ATA and ATAPI Block devices
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
# SCSI support
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# SCSI low-level drivers
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# Network device support
CONFIG_NETDEVICES=y
# ARCnet devices
CONFIG_DUMMY=m
# Ethernet (10 or 100Mbit)
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_EEPRO100=y
# PCMCIA network device support
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_XIRC2PS=y
# Character devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# Mice
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# Ftape, the floppy tape device driver
CONFIG_DRM=y
CONFIG_DRM_NEW=y
# File systems
CONFIG_AUTOFS4_FS=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_EXT2_FS=y
# Network File Systems
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
# Partition Types
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
# Native Language Support
CONFIG_NLS_DEFAULT="iso8859-1"
# Console drivers
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# Frame-buffer support
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_VESA=y
CONFIG_FB_VGA16=y
CONFIG_VIDEO_SELECT=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_VGA_PLANES=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# Sound
CONFIG_SOUND=y
CONFIG_SOUND_ES1371=y
CONFIG_SOUND_MAESTRO=y
# USB support
CONFIG_USB=y
CONFIG_USB_UHCI_ALT=y
Ich habe mir schon RedHat gesaugt, damit ich n Standard kernel benutzen kann, aber eigentlich würde ich gerne Gentoo benutzen und dort brauche ich n eigenen kernel (was erzähle ich, das wisst Ihr ja).
Wäre super wenn Euch dazu was einfällt.
Es tritt immer der folgende Fehler auf, wenn ich den Kernel mit grub boote:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCi: No IRQ known for Interrupt pin A of device 00:13.0. Please try using pci=biosirq
PCi: No IRQ known for Interrupt pin A of device 00:13.1. Please try using pci=biosirq
Intel PCIC probe: not found.
Den Vorschlag in der Fehlermeldung habe ich ausprobiert, sowohl in der grub.conf, als auch im Kernel in dem ich pci auf [BIOS] gesetzt habe. Leider brachte das keinen Erfolg.
Nach einigen Forschungen habe ich herausgefunden, was in meinem Notebook steckt:
Model: Satellite 2060
HDD_Int: Toshiba
Sound: ESS ES 1978
VGA: S3 ViRGE/MX
CPU: AMD K6-2 366
RAM: SDRAM 66
Modem: Lucent DSP1646(Mars2)
USB: NEC OHCI
CD_Int: Toshiba
PCMCIA: Toshiba ToPIC97 (Intel 82365 comp)
APM: V1.2
Mouse: PS2
ACPI: V1.0
Chipset: Toshiba
FloppyDisk_Int: intern
Also habe ich nachgeguckt, ob ich denn auch den Intel 82365 angeschmissen hab, leider war der auch schon drin.
Vielleicht hilft ja meine Kernel config weiter:
CONFIG_X86=y
CONFIG_UID16=y
# Code maturity level options
CONFIG_EXPERIMENTAL=y
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
# Processor type and features
CONFIG_MK6=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_HAS_TSC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_MCE=y
CONFIG_TOSHIBA=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y
# General setup
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
CONFIG_PCI_BIOS=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
# PCMCIA/CardBus support
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
CONFIG_I82092=y
CONFIG_I82365=y
# PCI Hotplug Support
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
# ACPI Support
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_TOSHIBA=y
# Plug and Play configuration
CONFIG_PNP=y
CONFIG_ISAPNP=y
# Block devices
CONFIG_BLK_DEV_FD=y
# Networking options
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# ATA/IDE/MFM/RLL support
CONFIG_IDE=y
# IDE, ATA and ATAPI Block devices
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
# SCSI support
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# SCSI low-level drivers
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# Network device support
CONFIG_NETDEVICES=y
# ARCnet devices
CONFIG_DUMMY=m
# Ethernet (10 or 100Mbit)
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_EEPRO100=y
# PCMCIA network device support
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_XIRC2PS=y
# Character devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# Mice
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# Ftape, the floppy tape device driver
CONFIG_DRM=y
CONFIG_DRM_NEW=y
# File systems
CONFIG_AUTOFS4_FS=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_EXT2_FS=y
# Network File Systems
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
# Partition Types
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
# Native Language Support
CONFIG_NLS_DEFAULT="iso8859-1"
# Console drivers
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# Frame-buffer support
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_VESA=y
CONFIG_FB_VGA16=y
CONFIG_VIDEO_SELECT=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_VGA_PLANES=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# Sound
CONFIG_SOUND=y
CONFIG_SOUND_ES1371=y
CONFIG_SOUND_MAESTRO=y
# USB support
CONFIG_USB=y
CONFIG_USB_UHCI_ALT=y
Ich habe mir schon RedHat gesaugt, damit ich n Standard kernel benutzen kann, aber eigentlich würde ich gerne Gentoo benutzen und dort brauche ich n eigenen kernel (was erzähle ich, das wisst Ihr ja).
Wäre super wenn Euch dazu was einfällt.