shb
16.11.03, 17:01
hi an alle
ich hoffe das ich hier im richtigen forum bin.
ich versuche ein dvd iso mit cdrecord-prodvd zu brennen.
ich hab das iso mit dd erstellt.
da ich mir nicht ganz sicher bin ob es ein + oder - brenner ist habe ich es mit beiden rohlingen versucht
als erstes habe ich aber den key über export gesetzt.
export 8DR_SECURITY=8:dvd,clone:sparc-sun-solaris2,i386-pc-solaris2,i586-pc-linux,powerpc-apple,hppa,powerpc-ibm-aix,i386-unknown-freebsd,i386-unknown-openbsd,i386-unknown-netbsd,powerpc-apple-netbsd,i386-pc-bsdi,mips-sgi-irix,i386-pc-sco:1.11::1076000000:::private/research/educational_non-commercial_use:5x4BaC25uw54A5H5NwqWG0E1R.AmjtDvYtS 4vx9qQmv2YBXFsEUQX8dvYvX
oder lieg hier schon der fehler?
und dann kommt ohne zu brennen dieser fehler bei +R rohlingen
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu -v dev=0,0,0 sp eed=1 route/route.iso Cdrecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Sch illing
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commerci al_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 2938 MB
Total size: 3374 MB (334:16.98) = 1504274 sectors
Lout start: 3374 MB (334:18/74) = 1504274 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1346485
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: WARNING: Data may not fit on current disk.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Most recorders cannot write C D's >= 90 minutes.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Use -ignsize option to allow >= 90 minutes.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Use -overburn option to write more than the official disk capacity.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Most CD-writers do overburnin g only on SAO or RAW mode.
und bei - R rohlingen diesen Fehler
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu -v dev=0,0,0 speed=1 route/route.iso
Cdrecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
FIFO size : 4194304 = 4096 KB
Track 01: data 2938 MB
Total size: 2938 MB = 1504272 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 794224
Starting to write CD/DVD at speed 2 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Input/output error. reserve_rzone: scsi sendcmd: no error
CDB: 53 00 00 00 00 00 16 F4 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 100s
Writing time: 0.035s
Average write speed 999.0x.
Fixating...
Fixating time: 0.000s
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: fifo had 64 puts and 0 gets.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: fifo was 0 times empty and 0 times full, min fill was 100%.
so und ich kann nicht den fehler finden ich glaub ich bin zu doof
ich hoffe mir kann hier jemand weiter helfen! :)
Danke im Voraus
cu Stefan
ich hoffe das ich hier im richtigen forum bin.
ich versuche ein dvd iso mit cdrecord-prodvd zu brennen.
ich hab das iso mit dd erstellt.
da ich mir nicht ganz sicher bin ob es ein + oder - brenner ist habe ich es mit beiden rohlingen versucht
als erstes habe ich aber den key über export gesetzt.
export 8DR_SECURITY=8:dvd,clone:sparc-sun-solaris2,i386-pc-solaris2,i586-pc-linux,powerpc-apple,hppa,powerpc-ibm-aix,i386-unknown-freebsd,i386-unknown-openbsd,i386-unknown-netbsd,powerpc-apple-netbsd,i386-pc-bsdi,mips-sgi-irix,i386-pc-sco:1.11::1076000000:::private/research/educational_non-commercial_use:5x4BaC25uw54A5H5NwqWG0E1R.AmjtDvYtS 4vx9qQmv2YBXFsEUQX8dvYvX
oder lieg hier schon der fehler?
und dann kommt ohne zu brennen dieser fehler bei +R rohlingen
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu -v dev=0,0,0 sp eed=1 route/route.iso Cdrecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Sch illing
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commerci al_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 2938 MB
Total size: 3374 MB (334:16.98) = 1504274 sectors
Lout start: 3374 MB (334:18/74) = 1504274 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1346485
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: WARNING: Data may not fit on current disk.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Most recorders cannot write C D's >= 90 minutes.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Use -ignsize option to allow >= 90 minutes.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Use -overburn option to write more than the official disk capacity.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Notice: Most CD-writers do overburnin g only on SAO or RAW mode.
und bei - R rohlingen diesen Fehler
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu -v dev=0,0,0 speed=1 route/route.iso
Cdrecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
FIFO size : 4194304 = 4096 KB
Track 01: data 2938 MB
Total size: 2938 MB = 1504272 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 794224
Starting to write CD/DVD at speed 2 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: Input/output error. reserve_rzone: scsi sendcmd: no error
CDB: 53 00 00 00 00 00 16 F4 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 100s
Writing time: 0.035s
Average write speed 999.0x.
Fixating...
Fixating time: 0.000s
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: fifo had 64 puts and 0 gets.
./cdrecord-prodvd-2.0.1-i586-pc-linux-gnu: fifo was 0 times empty and 0 times full, min fill was 100%.
so und ich kann nicht den fehler finden ich glaub ich bin zu doof
ich hoffe mir kann hier jemand weiter helfen! :)
Danke im Voraus
cu Stefan