Archiv verlassen und diese Seite im Standarddesign anzeigen : Proxy und Firebird
Hallo leute....
ich hab zwei Fragen:
1. Ist es möglich, Firebird klarzumachen, das 2 benutzer auf dem system sind?
Habe in Home 2 benutzerverzeichnisse und habe im moment firebird in Jedes verzeichnis entpackt, um verschiedene Lesezeichen zu nutzen. Geht das auch mit einer Installation?
2. Weche werte muss ich in den Proxy-Einstellungen anngeben, damit er mich über firebird mit dem I-Net verbindet?
habe versucht : 192.168.0.1:3128 --keine verbindung
127.0.0.1:3128 --keine Verbindung
oder ist Squid.conf falsch konfiguriert
(unter Proxy in YAST2 habe ich http://192.168.0.1:3128/ und ftp://192.168.0.1:3128/;
und Mailabruf über KMail funzt... also muss das ja richtig sein.)
Nur dem Browser kann ich s nicht begreiflich machen
Danke Schmale
zu 1)
Kopiere den Firebird Ordner nach /opt/MozillaFirebird-xxx (als root kopieren!) und erstelle die entsprechende Rechte (z.B. chmod o=rx *). Firebird in den entsprechenden Home Dirs automatisch die Konfigurationsdaten.
zu 2)
Da kann ich dir leider nicht helfen. Poste doch mal mehr Infos.
Ich bekomme beim Starten auch immer warnungen...
vor der Firewall-Konfiguration mit yast2 kamen keine warnungen:
Hier ein auszug au der start-log:
<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S08resmgr start
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=23 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=42 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>'/etc/init.d/rc5.d/S08resmgr start' exits with status 0
<notice>/etc/init.d/rc5.d/S09SuSEfirewall2_setup start
Starting Firewall Initialization (phase 2 of 3) Warning: detected activated squid, enabling FW_SERVICE_SQUID!
You still have to allow tcp port 3128 on internal, dmz and/or external.
Warning: FW_SERVICE_SQUID defined, but no Squid server found running!
done
<notice>'/etc/init.d/rc5.d/S09SuSEfirewall2_setup start' exits with status 0
Starting RPC portmap daemon<notice>/etc/init.d/rc5.d/S09portmap start
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=42 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S09splash_early start
<notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S13alsasound start
Starting sound driver: via686
done
Restoring the previous sound setting
done
<notice>'/etc/init.d/rc5.d/S13alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S13fbset start
<notice>'/etc/init.d/rc5.d/S13fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S13rpmconfigcheck start
<notice>'/etc/init.d/rc5.d/S13rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc5.d/S13sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=42 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S13sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S14SuSEfirewall2_final start
Starting Firewall Initialization (phase 3 of 3) Warning: detected activated squid, enabling FW_SERVICE_SQUID!
You still have to allow tcp port 3128 on internal, dmz and/or external.
Warning: FW_SERVICE_SQUID defined, but no Squid server found running!
done
<notice>'/etc/init.d/rc5.d/S14SuSEfirewall2_final start' exits with status 0
<notice>/etc/init.d/rc5.d/S14cups start
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=42 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>'/etc/init.d/rc5.d/S14cups start' exits with status 0
<notice>/etc/init.d/rc5.d/S14kbd start
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
Ich verstehe das nicht... ich weiss auch nicht, was ich falschgemacht habe
Need Hlp plz
Thx Schmale
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.