urmell
11.11.03, 16:43
Hallo Community!
Ich habe heute mittels poptop einen VPN Server auf meinem Linux Rechner eingerichtet. Man kann auch ohne weiteres von außen(aus dem Internet) auf diesen connecten. Die Clients bekommen dann ihre Ip zugewiesen, koennen sich aber nicht untereinander anpingen. Der VPN-Server selbst hingegen(192.168.2.19) kann von jedem Client per Ping erreicht werden.
Die Frage ist also warum sich die Clients nicht untereinander anpingen koennen.
Ich benutze SuSE 8.1 ausserdem ist die yast Firewall deaktiviert, so kann diese also als Ursache ausgeschlossen werden. Auch auf den Clients laufen keine Firewalls. Wo also liegt das Problem?
Hier noch meine pptpd.conf aus dem /etc Verzeichniss
################################################## ##############################
#
# Sample PoPToP configuration file
#
# for PoPToP version 0.9.12
#
################################################## ##############################
# TAG: speed
#
# Specifies the speed for the PPP daemon to talk at.
#
speed 115200
# TAG: debug
#
# Turns on (more) debugging to syslog
#
#debug
# TAG: localip
# TAG: remoteip
#
# Specifies the local and remote IP address ranges.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245
#localip 10.0.1.1
#remoteip 10.0.1.2-100
max_connections 6
localip 192.168.2.19 "<---- hier bin ich mir nicht sicher...muss dort die ip des servers eingetragen werden, sprich die lokale????"
remoteip 192.168.2.25-30
Vielen Dank schon im Vorraus
urmel
Ich habe heute mittels poptop einen VPN Server auf meinem Linux Rechner eingerichtet. Man kann auch ohne weiteres von außen(aus dem Internet) auf diesen connecten. Die Clients bekommen dann ihre Ip zugewiesen, koennen sich aber nicht untereinander anpingen. Der VPN-Server selbst hingegen(192.168.2.19) kann von jedem Client per Ping erreicht werden.
Die Frage ist also warum sich die Clients nicht untereinander anpingen koennen.
Ich benutze SuSE 8.1 ausserdem ist die yast Firewall deaktiviert, so kann diese also als Ursache ausgeschlossen werden. Auch auf den Clients laufen keine Firewalls. Wo also liegt das Problem?
Hier noch meine pptpd.conf aus dem /etc Verzeichniss
################################################## ##############################
#
# Sample PoPToP configuration file
#
# for PoPToP version 0.9.12
#
################################################## ##############################
# TAG: speed
#
# Specifies the speed for the PPP daemon to talk at.
#
speed 115200
# TAG: debug
#
# Turns on (more) debugging to syslog
#
#debug
# TAG: localip
# TAG: remoteip
#
# Specifies the local and remote IP address ranges.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245
#localip 10.0.1.1
#remoteip 10.0.1.2-100
max_connections 6
localip 192.168.2.19 "<---- hier bin ich mir nicht sicher...muss dort die ip des servers eingetragen werden, sprich die lokale????"
remoteip 192.168.2.25-30
Vielen Dank schon im Vorraus
urmel