SuSE 8.1: dvd rippen ?

[jonasge]

Hallo,
habe mir gerade SuSE 8.1 gekauft.

Ich habe so das gefühl,dass bei SuSE gar nicht die tools dabei sind, um dvd zu rippen ...


Stimmt das?



Muss ich also wie unter debian win32 codec +mplayer+transcode+perl::dvdrip manuell installieren??

Gruss
Jonas

[hunter]

In der Regel ist da nichts in dieser Richtung dabei. Und wenn dann veraltet. Machs also am besten nach:

meiner Anleitung: http://www.linuxforen.de/forums/show...threadid=54882

oder der von Midget: http://www.linuxforen.de/forums/show...threadid=23293

[jonasge]

OKi doki !!

Danke für den schnelle Antwort.

Aber SuSE 8.1 ist echt klasse, repekt an SuSE, das sie sowas gutes gemacht haben... (Yast2)
Erkennt echt alles... :-)


Gruss
Jonas

[SorcFun]

Nur ist das Problem (und das schon seit 8.0) das alle immer noch für 7.x programmiert oder erstellt wird. Siehe RPM-Dateien! Jetzt könnte man sagen: Kompeliere doch selber. Aber so weit sind halt manche Leute nicht oder habe keine Lust sich um jeden Sch... zu kümmern wenn es auch anders geht. Die von Webmin.com packen das doch auch. Und Linux sollte doch Anwenderfreundlicher werden. Wenn man schon z.B. 80€ für Suse 8.1 bezahlt. Wäre es so geblieben wie vor ca. 6 Jahren hätte ich mich nicht daran gewagt. Nur wird man immer öfter daran gehindert weil wieder ein Packet fehlt um die Software zu installieren.
Ich hoffe das es mehr Leute gibt die sich bemühen auch etwas für andere zu tun.

THX
Thorsten

[Celindir]

Zum Glück gibts Leute, die sich die Mühe machen.

Unter http://packman.links2linux.de/

finden sich viele Pakete für die aktuelle SuSE. Auch viel aus dem BEreich Multimedia (Xine Transcode, dvd::rip etc.)

[hunter]

Man sollte diese Programme nicht als Pakete installieren. Das macht keinen Sinn !!!

Dabei geht nachweislich Geschwindigkeit verloren. In Sachen DVD kann das ein Unterschied von Stunden sein die ein System mit Paketen und eins mit selbst compilierten Programmen und Libs braucht.

[jonasge]

hallo,

versuche gerade transcode zu installieren (SuSE 8.1)

Bei transcode 0.6.1 kommt dies:
make[3]: Wechsel in das Verzeichnis »/tmp/transcode-0.6.1/ffmpeg«
make[3]: Für das Target »all-am« gibt es nichts zu tun.
make[3]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.1/ffmpeg«
Making all in libavcodec
make[3]: Wechsel in das Verzeichnis »/tmp/transcode-0.6.1/ffmpeg/libavcodec«
make[3]: *** Keine Regel vorhanden, um das Target »fdct_mmx_c.c«,
benötigt von »fdct_mmx_c.o«, zu erstellen. Schluss.
make[3]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.1/ffmpeg/libavcodec«
make[2]: *** [all-recursive] Fehler 1
make[2]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.1/ffmpeg«
make[1]: *** [all-recursive] Fehler 1
make[1]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.1«
make: *** [all] Fehler 2
hggh@home:/tmp/transcode-0.6.1>


Und wenn ich es mit transcode 0.6.2 probiere das:
make[3]: Wechsel in das Verzeichnis »/tmp/transcode-0.6.2/filter/preview«
source='filter_preview.c' object='filter_preview.lo' libtool=yes \
depfile='.deps/filter_preview.Plo' tmpdepfile='.deps/filter_preview.TPlo' \
depmode=gcc3 /bin/sh ../../autotools/depcomp \
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I../.. -I. -I../.. -I. -I./ -
I../../src -I../ -I../../ -I./../../src -I./../.. -I/usr/include -I/usr/local/include
-Wall -I/usr/X11R6/include -I/usr/include/SDL -D_REENTRANT -D_REENTRANT -g -O3 -fom
it-frame-pointer -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o
filter_preview.lo `test -f 'filter_preview.c' || echo './'`filter_preview.c
gcc -DHAVE_CONFIG_H -I../.. -I. -I../.. -I. -I./ -I../../src -I../ -I../../ -I./../../s
rc -I./../.. -I/usr/include -I/usr/local/include -Wall -I/usr/X11R6/include -I/usr/incl
ude/SDL -D_REENTRANT -D_REENTRANT -g -O3 -fomit-frame-pointer -D_LARGEFILE_SOURCE -D_LA
RGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c filter_preview.c -MT filter_preview.lo -MD -
MP -MF .deps/filter_preview.TPlo -fPIC -DPIC -o filter_preview.lo
cc1: warning: changing search order for system directory "/usr/local/include"
cc1: warning: as it has already been specified as a non-system directory
cc1: warning: changing search order for system directory "/usr/include"
cc1: warning: as it has already been specified as a non-system directory
In file included from filter_preview.c:32:
display.h:69: parse error before "gint"
display.h:69: warning: no semicolon at end of struct or union
display.h:70: warning: type defaults to `int' in declaration of `pixels'
display.h:70: warning: data definition has no type or storage class
display.h:71: parse error before "pitches"
display.h:71: warning: type defaults to `int' in declaration of `pitches'
display.h:71: warning: data definition has no type or storage class
display.h:72: parse error before "dontdraw"
display.h:72: warning: type defaults to `int' in declaration of `dontdraw'
display.h:72: warning: data definition has no type or storage class
display.h:76: parse error before "len"
display.h:76: warning: type defaults to `int' in declaration of `len'
display.h:76: warning: data definition has no type or storage class
display.h:77: parse error before "format"
display.h:77: warning: type defaults to `int' in declaration of `format'
display.h:77: warning: data definition has no type or storage class
display.h:86: parse error before "dwidth"
display.h:86: warning: type defaults to `int' in declaration of `dwidth'
display.h:86: warning: type defaults to `int' in declaration of `dheight'
display.h:87: warning: type defaults to `int' in declaration of `swidth'
display.h:87: warning: type defaults to `int' in declaration of `sheight'
display.h:88: warning: type defaults to `int' in declaration of `lwidth'
display.h:88: warning: type defaults to `int' in declaration of `lheight'
display.h:89: warning: type defaults to `int' in declaration of `lxoff'
display.h:89: warning: type defaults to `int' in declaration of `lyoff'
display.h:90: warning: type defaults to `int' in declaration of `flags'
display.h:91: warning: type defaults to `int' in declaration of `pic_format'
display.h:91: warning: data definition has no type or storage class
display.h:112: parse error before "arg_display"
display.h:112: warning: type defaults to `int' in declaration of `arg_display'
display.h:113: warning: type defaults to `int' in declaration of `arg_aspect_val'
display.h:114: warning: type defaults to `int' in declaration of `arg_size_val'
display.h:115: warning: type defaults to `int' in declaration of `arg_xv_port'
display.h:115: warning: data definition has no type or storage class
display.h:116: parse error before '*' token
display.h:116: warning: type defaults to `int' in declaration of `arg_aspect_string'
display.h:116: warning: data definition has no type or storage class
display.h:121: parse error before '}' token
display.h:121: warning: type defaults to `int' in declaration of `dv_display_t'
display.h:121: warning: data definition has no type or storage class
display.h:127: parse error before '*' token
display.h:127: warning: type defaults to `int' in declaration of `dv_display_new'
display.h:127: warning: data definition has no type or storage class
display.h:128: parse error before "dv_display_init"
display.h:128: parse error before '*' token
display.h:132: warning: type defaults to `int' in declaration of `dv_display_init'
display.h:132: warning: data definition has no type or storage class
display.h:134: parse error before '*' token
display.h:135: parse error before '*' token
display.h:136: parse error before '*' token
display.h:137: parse error before '*' token
In file included from filter_preview.c:33:
filter_preview.h:32: parse error before "guint8"
filter_preview.h:32: warning: no semicolon at end of struct or union
filter_preview.h:33: warning: type defaults to `int' in declaration of `dv_mmap_region_
t'
filter_preview.h:33: warning: data definition has no type or storage class
filter_preview.h:37: parse error before "dv_display_t"
filter_preview.h:37: warning: no semicolon at end of struct or union
filter_preview.h:39: parse error before "mmap_region"
filter_preview.h:39: warning: type defaults to `int' in declaration of `mmap_region'
filter_preview.h:39: warning: data definition has no type or storage class
filter_preview.h:42: parse error before "arg_disable_audio"
filter_preview.h:42: warning: type defaults to `int' in declaration of `arg_disable_aud
io'
filter_preview.h:42: warning: data definition has no type or storage class
filter_preview.h:43: parse error before "arg_disable_video"
filter_preview.h:43: warning: type defaults to `int' in declaration of `arg_disable_vid
eo'
filter_preview.h:43: warning: data definition has no type or storage class
filter_preview.h:44: parse error before "arg_num_frames"
filter_preview.h:44: warning: type defaults to `int' in declaration of `arg_num_frames'
filter_preview.h:44: warning: data definition has no type or storage class
filter_preview.h:45: parse error before "arg_dump_frames"
filter_preview.h:45: warning: type defaults to `int' in declaration of `arg_dump_frames
'
filter_preview.h:45: warning: data definition has no type or storage class
filter_preview.h:46: warning: type defaults to `int' in declaration of `dv_player_t'
filter_preview.h:46: warning: data definition has no type or storage class
filter_preview.c:58: parse error before '*' token
filter_preview.c:58: warning: type defaults to `int' in declaration of `dv_player'
filter_preview.c:58: warning: data definition has no type or storage class
filter_preview.c:60: parse error before '*' token
filter_preview.c:61: warning: return type defaults to `int'
filter_preview.c: In function `dv_player_new':
filter_preview.c:62: `result' undeclared (first use in this function)
filter_preview.c:62: (Each undeclared identifier is reported only once
filter_preview.c:62: for each function it appears in.)
filter_preview.c: In function `tc_filter':
filter_preview.c:133: request for member `display' in something not a structure or unio
n
filter_preview.c:136: request for member `display' in something not a structure or unio
n
filter_preview.c:137: request for member `display' in something not a structure or unio
n
filter_preview.c:138: request for member `display' in something not a structure or unio n
filter_preview.c:150: request for member `display' in something not a structure or unio n
filter_preview.c:159: request for member `display' in something not a structure or unio n
filter_preview.c:168: request for member `display' in something not a structure or unio n
filter_preview.c:194: request for member `display' in something not a structure or unio n
filter_preview.c:221: request for member `display' in something not a structure or unio n
filter_preview.c:221: request for member `display' in something not a structure or unio n
filter_preview.c:224: request for member `display' in something not a structure or unio n
make[3]: *** [filter_preview.lo] Fehler 1
make[3]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.2/filter/preview«
make[2]: *** [all-recursive] Fehler 1
make[2]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.2/filter«
make[1]: *** [all-recursive] Fehler 1
make[1]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.2«
make: *** [all] Fehler 2
hggh@home:/tmp/transcode-0.6.2>


Und wenn ich transcode-0.6.3.20021128 probiere kommt das:
source='filter_preview.c' object='filter_preview.lo' libtool=yes \
depfile='.deps/filter_preview.Plo' tmpdepfile='.deps/filter_preview.TPlo' \
depmode=gcc3 /bin/sh ../../autotools/depcomp \
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I../.. -I. -I../.. -I. -I./ -I../../src -I../ -I../../ -I./../../src -I./../.. -I/usr/include -I/usr/local/include -Wall -I/usr/X11R6/include -I/usr/include/SDL -D_REENTRANT -D_REENTRANT -g -O3 -fomit-frame-pointer -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o filter_preview.lo `test -f 'filter_preview.c' || echo './'`filter_preview.c
gcc -DHAVE_CONFIG_H -I../.. -I. -I../.. -I. -I./ -I../../src -I../ -I../../ -I./../../src -I./../.. -I/usr/include -I/usr/local/include -Wall -I/usr/X11R6/include -I/usr/include/SDL -D_REENTRANT -D_REENTRANT -g -O3 -fomit-frame-pointer -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c filter_preview.c -MT filter_preview.lo -MD -MP -MF .deps/filter_preview.TPlo -fPIC -DPIC -o filter_preview.lo
cc1: warning: changing search order for system directory "/usr/local/include"
cc1: warning: as it has already been specified as a non-system directory
cc1: warning: changing search order for system directory "/usr/include"
cc1: warning: as it has already been specified as a non-system directory
In file included from filter_preview.c:32:
display.h:69: parse error before "gint"
display.h:69: warning: no semicolon at end of struct or union
display.h:70: warning: type defaults to `int' in declaration of `pixels'
display.h:70: warning: data definition has no type or storage class
display.h:71: parse error before "pitches"
display.h:71: warning: type defaults to `int' in declaration of `pitches'
display.h:71: warning: data definition has no type or storage class
display.h:72: parse error before "dontdraw"
display.h:72: warning: type defaults to `int' in declaration of `dontdraw'
display.h:72: warning: data definition has no type or storage class
display.h:76: parse error before "len"
display.h:76: warning: type defaults to `int' in declaration of `len'
display.h:76: warning: data definition has no type or storage class
display.h:77: parse error before "format"
display.h:77: warning: type defaults to `int' in declaration of `format'
display.h:77: warning: data definition has no type or storage class
display.h:86: parse error before "dwidth"
display.h:86: warning: type defaults to `int' in declaration of `dwidth'
display.h:86: warning: type defaults to `int' in declaration of `dheight'
display.h:87: warning: type defaults to `int' in declaration of `swidth'
display.h:87: warning: type defaults to `int' in declaration of `sheight'
display.h:88: warning: type defaults to `int' in declaration of `lwidth'
display.h:88: warning: type defaults to `int' in declaration of `lheight'
display.h:89: warning: type defaults to `int' in declaration of `lxoff'
display.h:89: warning: type defaults to `int' in declaration of `lyoff'
display.h:90: warning: type defaults to `int' in declaration of `flags'
display.h:91: warning: type defaults to `int' in declaration of `pic_format'
display.h:91: warning: data definition has no type or storage class
display.h:112: parse error before "arg_display"
display.h:112: warning: type defaults to `int' in declaration of `arg_display'
display.h:113: warning: type defaults to `int' in declaration of `arg_aspect_val'
display.h:114: warning: type defaults to `int' in declaration of `arg_size_val'
display.h:115: warning: type defaults to `int' in declaration of `arg_xv_port'
display.h:115: warning: data definition has no type or storage class
display.h:116: parse error before '*' token
display.h:116: warning: type defaults to `int' in declaration of `arg_aspect_string'
display.h:116: warning: data definition has no type or storage class
display.h:121: parse error before '}' token
display.h:121: warning: type defaults to `int' in declaration of `dv_display_t'
display.h:121: warning: data definition has no type or storage class
display.h:127: parse error before '*' token
display.h:127: warning: type defaults to `int' in declaration of `dv_display_new'
display.h:127: warning: data definition has no type or storage class
display.h:128: parse error before "dv_display_init"
display.h:128: parse error before '*' token
display.h:132: warning: type defaults to `int' in declaration of `dv_display_init'
display.h:132: warning: data definition has no type or storage class
display.h:134: parse error before '*' token
display.h:135: parse error before '*' token
display.h:136: parse error before '*' token
display.h:137: parse error before '*' token
In file included from filter_preview.c:33:
filter_preview.h:32: parse error before "guint8"
filter_preview.h:32: warning: no semicolon at end of struct or union
filter_preview.h:33: warning: type defaults to `int' in declaration of `dv_mmap_region_t'
filter_preview.h:33: warning: data definition has no type or storage class
filter_preview.h:37: parse error before "dv_display_t"
filter_preview.h:37: warning: no semicolon at end of struct or union
filter_preview.h:39: parse error before "mmap_region"
filter_preview.h:39: warning: type defaults to `int' in declaration of `mmap_region'
filter_preview.h:39: warning: data definition has no type or storage class
filter_preview.h:42: parse error before "arg_disable_audio"
filter_preview.h:42: warning: type defaults to `int' in declaration of `arg_disable_audio'
filter_preview.h:42: warning: data definition has no type or storage class
filter_preview.h:43: parse error before "arg_disable_video"
filter_preview.h:43: warning: type defaults to `int' in declaration of `arg_disable_video'
filter_preview.h:43: warning: data definition has no type or storage class
filter_preview.h:44: parse error before "arg_num_frames"
filter_preview.h:44: warning: type defaults to `int' in declaration of `arg_num_frames'
filter_preview.h:44: warning: data definition has no type or storage class
filter_preview.h:45: parse error before "arg_dump_frames"
filter_preview.h:45: warning: type defaults to `int' in declaration of `arg_dump_frames'
filter_preview.h:45: warning: data definition has no type or storage class
filter_preview.h:46: warning: type defaults to `int' in declaration of `dv_player_t'
filter_preview.h:46: warning: data definition has no type or storage class
filter_preview.c:58: parse error before '*' token
filter_preview.c:58: warning: type defaults to `int' in declaration of `dv_player'
filter_preview.c:58: warning: data definition has no type or storage class
filter_preview.c:60: parse error before '*' token
filter_preview.c:61: warning: return type defaults to `int'
filter_preview.c: In function `dv_player_new':
filter_preview.c:62: `result' undeclared (first use in this function)
filter_preview.c:62: (Each undeclared identifier is reported only once
filter_preview.c:62: for each function it appears in.)
filter_preview.c: In function `tc_filter':
filter_preview.c:133: request for member `display' in something not a structure or union
filter_preview.c:136: request for member `display' in something not a structure or union
filter_preview.c:137: request for member `display' in something not a structure or union
filter_preview.c:138: request for member `display' in something not a structure or union
filter_preview.c:150: request for member `display' in something not a structure or union
filter_preview.c:159: request for member `display' in something not a structure or union
filter_preview.c:168: request for member `display' in something not a structure or union
filter_preview.c:194: request for member `display' in something not a structure or union
filter_preview.c:221: request for member `display' in something not a structure or union
filter_preview.c:221: request for member `display' in something not a structure or union
filter_preview.c:224: request for member `display' in something not a structure or union
.deps/filter_preview.TPlo: Permission denied
make[3]: *** [filter_preview.lo] Fehler 1
make[3]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.3.20021128/filter/preview«
make[2]: *** [all-recursive] Fehler 1
make[2]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.3.20021128/filter«
make[1]: *** [all-recursive] Fehler 1
make[1]: Verlassen des Verzeichnisses »/tmp/transcode-0.6.3.20021128«
make: *** [all] Fehler 2
hggh@home:/tmp/transcode-0.6.3.20021128>


Was mache ich falsch ??

Alle drei Version lassen sich nicht uebersetzten, mplayer und das andere zeugs macht keine Probs..
Wenn das nicht geht kann ich ja immer noch mplayer+kmencoder benützen...



Gruss
Jonas

[udo1]

hi
wo hast du denn transcode 0.6.3 gefunden ?
hast du da mal einen link für mich?

danke

udo

[jonasge]

hi,
das ist eine pre-Version.
http://www.Theorie.Physik.UNI-Goetti...0021128.tar.gz


Gruss
JOnas

[udo1]

hi ionasge

du hast post

ich habs gerade mal mit suse 8.0 versucht geht ohne probleme

mfg

udo

[jonasge]

HI!

du hast post

Hä ??
Versteh ich net. ¿


Gruss
Jonas

[darktemplaaa]

Also Leute!!!!

Ich richte mich mal an denjenigen hier( ich hab seinen namen vergessen), der SuSE8.1 installiert hat. Geh auf die Seite http://packman.link2linux.de und lad dir dort alle nötigen Pakete für dvd::rip runter(lame,transcode,divx,mjpegtools.....usw.). Wichtig ist, dass du lame, dass nur als source rpm zur verfügung steht selbst compilierst und zwar mit dem Befehl und das als root

rpm --rebuild lamexxxxxx.src.rpm

Du findest das erschaffene i386 Paket dann unter /usr/src/packages/RPMS/i386 dieses Paket kannst du dann wie gewöhnlich mit dem Befehl

rpm -ivh lamexxxxx.i386.rpm

installieren.

Wenn du alle benötigten Pakete installiert hast kannst du transcode installieren und dann zum Schluss dvd::rip(Bemerke für dvd::rip brauchst du das Paket perl-lib oder so ähnlich wenn es fehlt wirst du aber bei der Installation drauf hingewiesen)

Eine Anleitung zum installieren und eine Übersicht aller benötigten Pakete findest du unter

http://www.linux-user.de/ausgabe/200...ip/dvdrip.html

Dort ist die Installation per source tarball erklärt. Für Anfänger empfehle ich aber die rpms auf der Seite http://packman.links2linux.de runterzuladen.

Ich habs unter SuSE8.1 seit Monaten am laufen und es ist einfach genial!!!!

Ein kleiner Tipp noch:

Ich brauche zum Erstellen von SVCDs und VCDs logischerweise die mjpegtools aber auch das Paket mjpegtools-devel. Beide Pakete erhält man auf der Seite

http://mjpegtools.sourceforge.net


Also viel Spaß dann

Gruss

darktemplaaa

[Painkiller]

Also die mjpgtools_devel brauchte ich micht für (S)VCD.....


Ich weise aber an dieser Stelle auf Huters beitrag hin, die RPM sind in so einem Falle nicht das non plus ultra

[darktemplaaa]

Ich kann nur eins sagen:


Bei mir läufts perfekt!!!!!!!!!!!

Und ich denke, dass der Macher von www.links2linux.de da eine riesen Sache für uns SuSE Fans gemacht hat!!!!!


Gruss

darktemplaaa