Hallo,
aus meinem Studentenwohnheim kann ich leider nur Provider mit einer 0800-Nummer anwählen. Bisher habe ich Tiscali benutzt, was auch klappte. Vor zwei Tage hatte ich allerdings ein Faxprogramm installiert und wieder deinstalliert, seitdem läuft die Einwahl nicht mehr.
Ich benutze auf meinem Thinkpad Laptop SuSE 8.0 (WVDial 1.42). Beim Anwählen passiert folgendes:
pppd: CONNECT ECLC
pppd: --> Carrier detected. Waiting for prompt.
pppd: CVX Access Switch.
pppd: Access is restricted to authorized users only.
pppd: login:
pppd: --> Looks like a login prompt.
pppd: --> Sending: dummy
pppd: dummy
pppd: password:
pppd: --> Looks like a password prompt.
pppd: --> Sending: (password)
pppd: Valid commands are:
pppd: shell Start system shell
pppd: telnet Start telnet session with remote host
pppd: quit Hang up and disconnect
pppd: help List valid commands
--- SCHNIPP ---
pppd: --> Don't know what to do! Starting pppd and hoping for the best.
pppd: Serial connection established.
pppd: using channel 4
pppd: Using interface ppp0
pppd: Connect: ppp0 <--> /dev/ttyS0
pppd: sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x988ad41 pcomp accomp]
pppd: rcvd [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x988ad41 pcomp accomp]
pppd: sent [LCP ConfNak id=0x1 magic 0xcc54fe82]
pppd: sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x988ad41 pcomp accomp]
pppd: sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x988ad41 pcomp accomp]
pppd: sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x988ad41 pcomp accomp]
Und immer so weiter. Die Einwahl scheitert. Bei anderen Anbietern kann ich mich problemlos einwählen. Wie schaffe ich es, dass ich bei Tiscali angemeldet werde?
Vielen Dank im Voraus.
Gruß
Julien
P.S.: Kennt jemand einen besseren Provider mit 0800-Nummer?
Lesezeichen