Hi,
hier noch ein paar Daten die ich ausgelesen haben:
Code:
root@Microknoppix:/home/knoppix# mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Mon Aug 18 04:45:17 2014
Raid Level : raid1
Array Size : 1000384 (976.94 MiB 1024.39 MB)
Used Dev Size : 1000384 (976.94 MiB 1024.39 MB)
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Thu Mar 8 15:48:03 2018
State : clean, degraded
Active Devices : 1
Working Devices : 2
Failed Devices : 0
Spare Devices : 1
UUID : 7f1d4eff:9835ea4b:d492c206:d761ad9f
Events : 0.1218
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
- 0 0 1 removed
2 8 33 - spare /dev/sdc1
Code:
root@Microknoppix:/home/knoppix# mdadm --assemble --sc
mdadm: No arrays found in config file or automatically
Code:
root@Microknoppix:/home/knoppix# cat /proc/mdstat
Personalities : [raid1]
md22 : active raid1 sdc6[0]
961748840 blocks super 1.2 [2/1] [U_]
md21 : active raid1 sdb6[0]
961748840 blocks super 1.2 [2/1] [U_]
md1 : active raid1 sdc2[3] sdb2[2]
4999156 blocks super 1.2 [2/2] [UU]
md10 : active (auto-read-only) raid1 sdc5[2] sdb5[0]
1000436 blocks super 1.2 [2/2] [UU]
md0 : active raid1 sdc1[2](S) sdb1[0]
1000384 blocks [2/1] [U_]
unused devices: <none>
Code:
root@Microknoppix:/home/knoppix# smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.7.9-64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar 5K750
Device Model: Hitachi HTS547575A9E384
Serial Number: J2140059EE9XDA
LU WWN Device Id: 5 000cca 6dfe23d0e
Firmware Version: JE4OA50B
User Capacity: 750.156.374.016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Mar 8 15:56:50 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 198) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 214 214 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2023
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 074 074 000 Old_age Always - 11795
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1949
160 Unknown_Attribute 0x003b 100 100 001 Pre-fail Always - 0
191 G-Sense_Error_Rate 0x000a 092 092 000 Old_age Always - 2228235
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 59
193 Load_Cycle_Count 0x0012 069 069 000 Old_age Always - 312123
194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 2/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 4
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
root@Microknoppix:/home/knoppix# smartctl -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.7.9-64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
root@Microknoppix:/home/knoppix# smartctl -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.7.9-64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate SV35
Device Model: ST1000VX000-1CU162
Serial Number: S1DD1ACS
LU WWN Device Id: 5 000c50 061ef3fbf
Firmware Version: CV22
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Mar 8 15:57:54 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 80) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10b9) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 197312560
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 77
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 7525817
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 445
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 74
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 493928775795
189 High_Fly_Writes 0x003a 092 092 000 Old_age Always - 8
190 Airflow_Temperature_Cel 0x0022 061 058 045 Old_age Always - 39 (Min/Max 21/39)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 26
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 77
194 Temperature_Celsius 0x0022 039 042 000 Old_age Always - 39 (0 13 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 6236
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
root@Microknoppix:/home/knoppix# smartctl -a /dev/sdd
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.7.9-64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdd: Unknown USB bridge [0x058f:0x6387 (0x100)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
Code:
root@Microknoppix:/home/knoppix# smartctl -a /dev/sde
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.7.9-64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sde failed: No such device or address
Code:
root@Microknoppix:/home/knoppix# mdadm --detail /dev/md10
/dev/md10:
Version : 1.2
Creation Time : Mon Aug 18 04:45:18 2014
Raid Level : raid1
Array Size : 1000436 (976.99 MiB 1024.45 MB)
Used Dev Size : 1000436 (976.99 MiB 1024.45 MB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Thu Mar 1 14:06:20 2018
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : LS-WXL-EM3DD:10
UUID : 361f1244:ebf2238c:c8e1f48e:a51c2c22
Events : 15807
Number Major Minor RaidDevice State
0 8 21 0 active sync /dev/sdb5
2 8 37 1 active sync /dev/sdc5
Code:
root@Microknoppix:/home/knoppix# mdadm --detail /dev/md
mdadm: /dev/md does not appear to be an md device
Code:
root@Microknoppix:/home/knoppix# mdadm --detail /dev/md021
mdadm: cannot open /dev/md021: No such file or directory
Code:
root@Microknoppix:/home/knoppix# mdadm --detail /dev/md22
/dev/md22:
Version : 1.2
Creation Time : Mon Feb 26 20:30:07 2018
Raid Level : raid1
Array Size : 961748840 (917.20 GiB 984.83 GB)
Used Dev Size : 961748840 (917.20 GiB 984.83 GB)
Raid Devices : 2
Total Devices : 1
Persistence : Superblock is persistent
Update Time : Thu Mar 8 15:39:39 2018
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
Name : NAS_LAUFWERK:22
UUID : fadb8bc1:e26a5622:22ee87fa:4a33ff88
Events : 200
Number Major Minor RaidDevice State
0 8 38 0 active sync /dev/sdc6
- 0 0 1 removed
root@Microknoppix:/home/knoppix#
Lesezeichen