Anzeige:
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 15 von 29

Thema: Welches Programm zieht Leistung?

  1. #1
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Beiträge
    28

    Question Welches Programm zieht Leistung?

    Hallo

    ein Programm? zieht irgendwie Leistung!

    Der Lüfter läuft ständig auf voller Leistung und das System ist sehr langsam. Ich habe nur Firefox geöffnet.

    Hat da jemand eine Idee woran es liegen kann?

    Ich habe openSuse Leap 42.2 und einen AMD A4 Chip.

    Schönen Sonntag Gruß Frank

  2. #2
    Mod. FAQ/Howto/Emulation
    Registriert seit
    Sep 2000
    Beiträge
    17.044
    AMD A4 ist doch Billigst-Hardware ohne Leistung.

    Erzähl mal was: Desktop (KDE, Gnome), Hauptspeichergröße, Grafikkarte?

    Lief das Gerät jemals in der gleichen Konfiguration vernünftig?

  3. #3
    kleine schwester von root Avatar von corresponder
    Registriert seit
    May 2002
    Ort
    192.67.198.56
    Beiträge
    3.797
    "top" in einer konsole zeigt dir, was leistung zieht
    "dmesg" zeigt kernelmeldungen

    gruss

    c.
    _______________________________________

    www.audio4linux.de - musik machen mit offenen quellen!

  4. #4
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Beiträge
    28
    Hier sagt mir als Laie aber nix :-(
    top - 18:01:05 up 10 min, 1 user, load average: 1,85, 2,22, 1,42
    Tasks: 183 total, 2 running, 181 sleeping, 0 stopped, 0 zombie
    %Cpu(s): 58,1 us, 3,7 sy, 0,0 ni, 38,2 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st
    KiB Mem: 5569076 total, 2415540 used, 3153536 free, 2104 buffers
    KiB Swap: 2103292 total, 0 used, 2103292 free. 1137032 cached Mem

    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    1771 hetzer 20 0 3910872 359092 95184 S 99,67 6,448 7:56.89 plasmashell
    1833 hetzer 20 0 1847120 680568 126736 S 11,96 12,22 5:09.50 firefox
    2191 hetzer 20 0 841724 89820 71108 S 4,319 1,613 0:04.53 konsole
    1104 root 20 0 325464 75424 54088 S 3,322 1,354 0:23.55 X
    1765 hetzer 20 0 3301716 108644 69736 S 2,658 1,951 0:15.74 kwin_x11
    7 root 20 0 0 0 0 D 0,332 0,000 0:01.78 rcu_sched
    95 root 20 0 0 0 0 S 0,332 0,000 0:00.38 kworker/0:2
    790 root 20 0 0 0 0 R 0,332 0,000 0:00.18 xfsaild/sda3
    1 root 20 0 119588 5728 3932 S 0,000 0,103 0:03.69 systemd
    2 root 20 0 0 0 0 S 0,000 0,000 0:00.00 kthreadd
    3 root 20 0 0 0 0 S 0,000 0,000 0:00.25 ksoftirqd/0
    5 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 kworker/0:0H
    6 root 20 0 0 0 0 S 0,000 0,000 0:00.50 kworker/u8:0
    8 root 20 0 0 0 0 S 0,000 0,000 0:00.00 rcu_bh
    9 root rt 0 0 0 0 S 0,000 0,000 0:00.00 migration/0
    10 root rt 0 0 0 0 S 0,000 0,000 0:00.00 watchdog/0
    11 root rt 0 0 0 0 S 0,000 0,000 0:00.00 watchdog/1
    12 root rt 0 0 0 0 S 0,000 0,000 0:00.00 migration/1
    13 root 20 0 0 0 0 S 0,000 0,000 0:00.22 ksoftirqd/1
    14 root 20 0 0 0 0 S 0,000 0,000 0:00.21 kworker/1:0
    15 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 kworker/1:0H
    17 root 20 0 0 0 0 S 0,000 0,000 0:00.00 kdevtmpfs
    18 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 netns
    19 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 perf
    20 root 20 0 0 0 0 S 0,000 0,000 0:00.00 khungtaskd
    21 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 writeback
    22 root 20 0 0 0 0 S 0,000 0,000 0:00.00 kcompactd0
    23 root 25 5 0 0 0 S 0,000 0,000 0:00.00 ksmd
    24 root 20 0 0 0 0 S 0,000 0,000 0:00.74 kworker/1:1
    25 root 39 19 0 0 0 S 0,000 0,000 0:00.01 khugepaged
    26 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 crypto
    27 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 kintegrityd
    28 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 bioset
    29 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 kblockd
    30 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 devfreq_wq
    32 root 20 0 0 0 0 S 0,000 0,000 0:00.00 kswapd0
    33 root 0 -20 0 0 0 S 0,000 0,000 0:00.00 vmstat
    34 root 20 0 0 0 0 S 0,000 0,000 0:00.00 fsnotify_mark

  5. #5
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Beiträge
    28
    Die Kernel Meldung ist zu lang
    Hier nur ein Teil
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 4.4.36-8-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP Fri Dec 9 16:18:38 UTC 2016 (3ec5648)
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.36-8-default root=UUID=f560e1cf-4df2-4aba-a5d9-3f5ca09e70f3 resume=/dev/sda1 splash=silent quiet showopts
    [ 0.000000] tseg: 00bff00000
    [ 0.000000] x86/fpu: Legacy x87 FPU detected.
    [ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf485fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf486000-0x00000000bf88efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf88f000-0x00000000bfb3efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bfb3f000-0x00000000bfbbefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfebefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bfebf000-0x00000000bfef5fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bfef6000-0x00000000bfefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000dfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: TOSHI\xffffffc7A SATLLLITE L75/Torpedo, BIOS 1.50 11/23/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:

  6. #6
    Newbie and practicing Avatar von Newbie314
    Registriert seit
    Mar 2007
    Beiträge
    7.569
    Hi 18301,

    bitte spezifiziere genauer was du gelöscht haben willst. Beitrag Nr. 6 ?

    Bei dmesg kürzt
    Code:
     dmesg | tail
    die Ausgabe. Derartige Ausgaben bitte immer in Code Tags, das macht sie leichter zu lesen. Wenn ich mich recht erinnere müsste mit "code" auch die Ausgabe von "top" lesbar werden, im Augenblick ist die Zuordnung der Ausgaben zu der Titelzeile nicht erkennbar da ungeordnet.
    Bei Konsolenausgaben / Fehlermeldungen bitte immer Code Tags verwenden: [code] -Text- [/code]
    "Überzeugungen sind gefährlichere Feinde der Wahrheit als Lügen" (H. Lesch)

  7. #7
    kleine schwester von root Avatar von corresponder
    Registriert seit
    May 2002
    Ort
    192.67.198.56
    Beiträge
    3.797
    1771 hetzer 20 0 3910872 359092 95184 S 99,67 6,448 7:56.89 plasmashell

    nimmt last, eventuell keinen guten grafikkartentreiber installiert?

    gruss

    c.
    _______________________________________

    www.audio4linux.de - musik machen mit offenen quellen!

  8. #8
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Beiträge
    28
    Ja bitte Beitrag 6 löschen.

    Code:
    ]hetzer@linux-fmf2:~> "dmesg"
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 4.4.36-8-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP Fri Dec 9 16:18:38 UTC 2016 (3ec5648)
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.36-8-default root=UUID=f560e1cf-4df2-4aba-a5d9-3f5ca09e70f3 resume=/dev/sda1 splash=silent quiet showopts
    [    0.000000] tseg: 00bff00000
    [    0.000000] x86/fpu: Legacy x87 FPU detected.
    [    0.000000] x86/fpu: Using 'lazy' FPU context switches.
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf485fff] usable
    [    0.000000] BIOS-e820: [mem 0x00000000bf486000-0x00000000bf88efff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x00000000bf88f000-0x00000000bfb3efff] usable
    [    0.000000] BIOS-e820: [mem 0x00000000bfb3f000-0x00000000bfbbefff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfebefff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x00000000bfebf000-0x00000000bfef5fff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x00000000bfef6000-0x00000000bfefffff] usable
    [    0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000dfffffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] SMBIOS 2.7 present.
    [    0.000000] DMI: TOSHI\xffffffc7A SATLLLITE L75/Torpedo, BIOS 1.50 11/23/2011
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-FFFFF write-through
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0000000000 mask FF80000000 write-back
    [    0.000000]   1 base 0080000000 mask FFC0000000 write-back                                                                                                                                   
    [    0.000000]   2 base 00BFEBE000 mask FFFFFFF000 uncachable                                                                                                                                   
    [    0.000000]   3 base 00FFE00000 mask FFFFE00000 write-protect                                                                                                                                
    [    0.000000]   4 disabled                                                                                                                                                                     
    [    0.000000]   5 disabled                                                                                                                                                                     
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] TOM2: 000000019f000000 aka 6640M
    [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
    [    0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] BRK [0x023df000, 0x023dffff] PGTABLE
    [    0.000000] BRK [0x023e0000, 0x023e0fff] PGTABLE
    [    0.000000] BRK [0x023e1000, 0x023e1fff] PGTABLE
    [    0.000000] BRK [0x023e2000, 0x023e2fff] PGTABLE
    [    0.000000] BRK [0x023e3000, 0x023e3fff] PGTABLE
    [    0.000000] BRK [0x023e4000, 0x023e4fff] PGTABLE
    [    0.000000] RAMDISK: [mem 0x369ca000-0x374dcfff]
    [    0.000000] ACPI: Early table checksum verification disabled
    [    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSQCI)
    [    0.000000] ACPI: XSDT 0x00000000BFEF5120 00007C (v01 TOSQCI TOSQCI00 00000001      01000013)
    [    0.000000] ACPI: FACP 0x00000000BFEF4000 0000F4 (v04 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: DSDT 0x00000000BFEDF000 010FC5 (v01 TOSQCI TOSQCI00 F0000000 ACPI 00040000)
    [    0.000000] ACPI: FACS 0x00000000BFC97000 000040
    [    0.000000] ACPI: FACS 0x00000000BFC97000 000040
    [    0.000000] ACPI: HPET 0x00000000BFEF3000 000038 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: APIC 0x00000000BFEF2000 000084 (v02 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: MCFG 0x00000000BFEF1000 00003C (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: ASF! 0x00000000BFEF0000 0000A5 (v32 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: BOOT 0x00000000BFEDE000 000028 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: SLIC 0x00000000BFEDD000 000176 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: WDRT 0x00000000BFEDC000 000047 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: MSDM 0x00000000BFEDB000 000055 (v03 TOSQCI TOSQCI00 00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x00000000BFEDA000 000726 (v01 AMD    POWERNOW 00000001 AMD  00000001)
    [    0.000000] ACPI: SSDT 0x00000000BFED8000 00193D (v02 AMD    ALIB     00000001 MSFT 04000000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
    [    0.000000] NODE_DATA(0) allocated [mem 0x19efd2000-0x19effcfff]
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
    [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
    [    0.000000]   Normal   [mem 0x0000000100000000-0x000000019effffff]
    [    0.000000]   Device   empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
    [    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf485fff]
    [    0.000000]   node   0: [mem 0x00000000bf88f000-0x00000000bfb3efff]
    [    0.000000]   node   0: [mem 0x00000000bfef6000-0x00000000bfefffff]
    [    0.000000]   node   0: [mem 0x0000000100000000-0x000000019effffff]
    [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000019effffff]
    [    0.000000] On node 0 totalpages: 1435358
    [    0.000000]   DMA zone: 64 pages used for memmap
    [    0.000000]   DMA zone: 21 pages reserved
    [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 12189 pages used for memmap
    [    0.000000]   DMA32 zone: 780096 pages, LIFO batch:31
    [    0.000000]   Normal zone: 10176 pages used for memmap
    [    0.000000]   Normal zone: 651264 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x408
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xbf486000-0xbf88efff]
    [    0.000000] PM: Registered nosave memory: [mem 0xbfb3f000-0xbfbbefff]
    [    0.000000] PM: Registered nosave memory: [mem 0xbfbbf000-0xbfebefff]
    [    0.000000] PM: Registered nosave memory: [mem 0xbfebf000-0xbfef5fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    [    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
    [    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88019ec00000 s94296 r8192 d32680 u524288
    [    0.000000] pcpu-alloc: s94296 r8192 d32680 u524288 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 
    [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1412908
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.36-8-default root=UUID=f560e1cf-4df2-4aba-a5d9-3f5ca09e70f3 resume=/dev/sda1 splash=silent quiet showopts
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Memory: 5136164K/5741432K available (6205K kernel code, 1379K rwdata, 4964K rodata, 2052K init, 2544K bss, 188924K reserved, 0K cma-reserved)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Build-time adjustment of leaf fanout to 64.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
    [    0.000000] NR_IRQS:524544 nr_irqs:456 16
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
    [    0.000000] hpet clockevent registered
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 1896.644 MHz processor
    [    0.000047] Calibrating delay loop (skipped), value calculated using timer frequency.. 3793.28 BogoMIPS (lpj=7586576)
    [    0.000051] pid_max: default: 32768 minimum: 301
    [    0.000059] ACPI: Core revision 20150930
    [    0.024012] ACPI: 3 ACPI AML tables successfully acquired and loaded
    [    0.024059] Security Framework initialized
    [    0.024069] AppArmor: AppArmor initialized
    [    0.024858] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.027504] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.028684] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.028699] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.029094] Initializing cgroup subsys io
    [    0.029100] Initializing cgroup subsys memory
    [    0.029113] Initializing cgroup subsys devices
    [    0.029117] Initializing cgroup subsys freezer
    [    0.029122] Initializing cgroup subsys net_cls
    [    0.029126] Initializing cgroup subsys perf_event
    [    0.029130] Initializing cgroup subsys net_prio
    [    0.029135] Initializing cgroup subsys hugetlb
    [    0.029138] Initializing cgroup subsys pids
    [    0.029166] CPU: Physical Processor ID: 0
    [    0.029167] CPU: Processor Core ID: 0
    [    0.029170] mce: CPU supports 6 MCE banks
    [    0.029180] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    [    0.029182] Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
    [    0.029729] Freeing SMP alternatives memory: 24K (ffffffff8215b000 - ffffffff82161000)
    [    0.039983] ftrace: allocating 25361 entries in 100 pages
    [    0.054634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.200659] smpboot: CPU0: AMD A4-3305M APU with Radeon(tm) HD Graphics (family: 0x12, model: 0x1, stepping: 0x0)
    [    0.200695] Performance Events: AMD PMU driver.
    [    0.200700] ... version:                0
    [    0.200702] ... bit width:              48
    [    0.200703] ... generic registers:      4
    [    0.200704] ... value mask:             0000ffffffffffff
    [    0.200706] ... max period:             00007fffffffffff
    [    0.200707] ... fixed-purpose events:   0
    [    0.200708] ... event mask:             000000000000000f
    [    0.201346] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.201487] x86: Booting SMP configuration:
    [    0.201490] .... node  #0, CPUs:  smpboot:    smpboot:  #1
    [    0.203627] x86: Booted up 1 node, 2 CPUs
    [    0.203630] smpboot: Total of 2 processors activated (7586.57 BogoMIPS)
    [    0.207919] node 0 initialised, 104086 pages in 4ms
    [    0.208568] devtmpfs: initialized
    [    0.215032] evm: security.selinux
    [    0.215034] evm: security.ima
    [    0.215035] evm: security.capability
    [    0.215231] PM: Registering ACPI NVS region [mem 0xbf486000-0xbf88efff] (4231168 bytes)
    [    0.215393] PM: Registering ACPI NVS region [mem 0xbfbbf000-0xbfebefff] (3145728 bytes)
    [    0.215630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
    [    0.215824] pinctrl core: initialized pinctrl subsystem
    [    0.215879] RTC time: 16:50:35, date: 01/15/17
    [    0.216072] NET: Registered protocol family 16
    [    0.224847] cpuidle: using governor ladder
    [    0.256848] cpuidle: using governor menu
    [    0.257022] Simple Boot Flag at 0x44 set to 0x1
    [    0.257079] ACPI: bus type PCI registered
    [    0.257082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    0.257233] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [    0.257237] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [    0.257245] PCI: Using configuration type 1 for base access
    [    0.257572] mtrr: your CPUs had inconsistent variable MTRR settings
    [    0.257573] mtrr: probably your BIOS does not setup all CPUs.
    [    0.257574] mtrr: corrected configuration.
    [    0.277966] ACPI: Added _OSI(Module Device)
    [    0.277971] ACPI: Added _OSI(Processor Device)
    [    0.277973] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.277975] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.312868] ACPI Error: [\_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
    [    0.312902] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC0.EC0._REG] (Node ffff88017fcbb360), AE_NOT_FOUND (20150930/psparse-542)
    [    0.314042] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.321788] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    0.322457] ACPI : EC: EC started
    [    0.352865] ACPI Error: [\_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
    [    0.352901] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC0.EC0._REG] (Node ffff88017fcbb360), AE_NOT_FOUND (20150930/psparse-542)
    [    0.352917] ACPI: Interpreter enabled
    [    0.352955] ACPI: (supports S0 S3 S4 S5)
    [    0.352957] ACPI: Using IOAPIC for interrupt routing
    [    0.353231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.363873] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.363883] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [    0.363890] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [    0.363907] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [    0.364032] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cefff])
    [    0.364442] PCI host bridge to bus 0000:00
    [    0.364445] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
    [    0.364447] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
    [    0.364449] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [    0.364451] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
    [    0.364453] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
    [    0.364455] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
    [    0.364457] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
    [    0.364459] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
    [    0.364461] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
    [    0.364462] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
    [    0.364464] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
    [    0.364466] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
    [    0.364468] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
    [    0.364470] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
    [    0.364472] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
    [    0.364474] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xffffffff window]
    [    0.364476] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.364485] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
    [    0.364620] pci 0000:00:01.0: [1002:9649] type 00 class 0x030000
    [    0.364639] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
    [    0.364658] pci 0000:00:01.0: reg 0x14: [io  0x3000-0x30ff]
    [    0.364665] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
    [    0.364703] pci 0000:00:01.0: supports D1 D2
    [    0.364811] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
    [    0.364828] pci 0000:00:01.1: reg 0x10: [mem 0xf0244000-0xf0247fff]
    [    0.364875] pci 0000:00:01.1: supports D1 D2
    [    0.364985] pci 0000:00:04.0: [1022:1709] type 01 class 0x060400
    [    0.365046] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [    0.365142] pci 0000:00:04.0: System wakeup disabled by ACPI
    [    0.365201] pci 0000:00:05.0: [1022:170a] type 01 class 0x060400
    [    0.365262] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [    0.365355] pci 0000:00:05.0: System wakeup disabled by ACPI
    [    0.365431] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [    0.365460] pci 0000:00:11.0: reg 0x10: [io  0x3118-0x311f]
    [    0.365470] pci 0000:00:11.0: reg 0x14: [io  0x3124-0x3127]
    [    0.365481] pci 0000:00:11.0: reg 0x18: [io  0x3110-0x3117]
    [    0.365491] pci 0000:00:11.0: reg 0x1c: [io  0x3120-0x3123]
    [    0.365501] pci 0000:00:11.0: reg 0x20: [io  0x3100-0x310f]
    [    0.365512] pci 0000:00:11.0: reg 0x24: [mem 0xf024f000-0xf024f7ff]
    [    0.365648] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [    0.365665] pci 0000:00:12.0: reg 0x10: [mem 0xf024e000-0xf024efff]
    [    0.365857] pci 0000:00:12.0: System wakeup disabled by ACPI
    [    0.365908] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [    0.366164] pci 0000:00:12.2: reg 0x10: [mem 0xf024d000-0xf024d0ff]
    [    0.367389] pci 0000:00:12.2: supports D1 D2
    [    0.367391] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    0.367508] pci 0000:00:12.2: System wakeup disabled by ACPI
    [    0.367563] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [    0.367581] pci 0000:00:13.0: reg 0x10: [mem 0xf024c000-0xf024cfff]
    [    0.367711] pci 0000:00:13.0: System wakeup disabled by ACPI
    [    0.367768] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [    0.367991] pci 0000:00:13.2: reg 0x10: [mem 0xf024b000-0xf024b0ff]
    [    0.369213] pci 0000:00:13.2: supports D1 D2
    [    0.369215] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    0.369287] pci 0000:00:13.2: System wakeup disabled by ACPI
    [    0.369339] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [    0.369527] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [    0.369559] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
    [    0.369630] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [    0.369720] pci 0000:00:14.2: System wakeup disabled by ACPI
    [    0.369777] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [    0.369975] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [    0.370081] pci 0000:00:14.4: System wakeup disabled by ACPI
    [    0.370127] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
    [    0.370144] pci 0000:00:14.5: reg 0x10: [mem 0xf024a000-0xf024afff]
    [    0.370272] pci 0000:00:14.5: System wakeup disabled by ACPI
    [    0.370320] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
    [    0.370337] pci 0000:00:16.0: reg 0x10: [mem 0xf0249000-0xf0249fff]
    [    0.370469] pci 0000:00:16.0: System wakeup disabled by ACPI
    [    0.370532] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
    [    0.370754] pci 0000:00:16.2: reg 0x10: [mem 0xf0248000-0xf02480ff]
    [    0.371967] pci 0000:00:16.2: supports D1 D2
    [    0.371969] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [    0.372041] pci 0000:00:16.2: System wakeup disabled by ACPI
    [    0.372092] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    [    0.372220] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    [    0.372367] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    [    0.372514] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    [    0.372674] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    [    0.372796] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    [    0.372913] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    [    0.373030] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    [    0.373245] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
    [    0.373286] pci 0000:01:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
    [    0.373298] pci 0000:01:00.0: reg 0x18: [io  0x2000-0x207f]
    [    0.373385] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.380855] pci 0000:00:04.0: PCI bridge to [bus 01]
    [    0.380875] pci 0000:00:04.0:   bridge window [io  0x2000-0x2fff]
    [    0.380885] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
    [    0.381022] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
    [    0.381061] pci 0000:02:00.0: reg 0x10: [mem 0xf0000000-0xf000ffff 64bit]
    [    0.381162] pci 0000:02:00.0: supports D1
    [    0.381164] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
    [    0.388852] pci 0000:00:05.0: PCI bridge to [bus 02]
    [    0.388876] pci 0000:00:05.0:   bridge window [mem 0xf0000000-0xf00fffff]
    [    0.389017] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
    [    0.389027] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
    [    0.389029] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
    [    0.389032] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
    [    0.389034] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
    [    0.389035] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
    [    0.389037] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
    [    0.389039] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
    [    0.389041] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
    [    0.389043] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
    [    0.389045] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
    [    0.389046] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
    [    0.389048] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
    [    0.389051] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
    [    0.389052] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
    [    0.389054] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
    [    0.389056] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xffffffff window] (subtractive decode)
    [    0.390121] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.390224] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.390330] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.390434] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.390521] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.390589] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.390658] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.390726] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.391075] ACPI: Enabled 5 GPEs in block 00 to 1F
    [    0.391155] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [    0.391431] vgaarb: setting as boot device: PCI:0000:00:01.0
    [    0.391441] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.391449] vgaarb: loaded
    [    0.391451] vgaarb: bridge control possible 0000:00:01.0
    [    0.391622] PCI: Using ACPI for IRQ routing
    [    0.393887] PCI: pci_cache_line_size set to 64 bytes
    [    0.393960] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [    0.393963] e820: reserve RAM buffer [mem 0xbf486000-0xbfffffff]
    [    0.393964] e820: reserve RAM buffer [mem 0xbfb3f000-0xbfffffff]
    [    0.393966] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
    [    0.393967] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
    [    0.394109] NetLabel: Initializing
    [    0.394110] NetLabel:  domain hash size = 128
    [    0.394111] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.394124] NetLabel:  unlabeled traffic allowed by default
    [    0.394173] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.394177] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [    0.396194] amd_nb: Cannot enumerate AMD northbridges
    [    0.396261] clocksource: Switched to clocksource hpet
    [    0.404340] AppArmor: AppArmor Filesystem Enabled
    [    0.404438] pnp: PnP ACPI init
    [    0.404658] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.404661] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.404664] system 00:00: [mem 0xff800000-0xff80001f] has been reserved
    [    0.404669] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.404897] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.404940] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.404994] pnp 00:03: Plug and Play ACPI device, IDs TOS0200 SYN1000 SYN0002 PNP0f13 (active)
    [    0.405071] system 00:04: [io  0x0400-0x04cf] could not be reserved
    [    0.405074] system 00:04: [io  0x04d0-0x04d1] has been reserved
    [    0.405076] system 00:04: [io  0x04d6] has been reserved
    [    0.405079] system 00:04: [io  0x0550] has been reserved
    [    0.405082] system 00:04: [io  0x0680-0x06ff] has been reserved
    [    0.405084] system 00:04: [io  0x077a] has been reserved
    [    0.405088] system 00:04: [io  0x0c00-0x0c01] has been reserved
    [    0.405090] system 00:04: [io  0x0c14] has been reserved
    [    0.405093] system 00:04: [io  0x0c50-0x0c52] has been reserved
    [    0.405095] system 00:04: [io  0x0c6c] has been reserved
    [    0.405098] system 00:04: [io  0x0c6f] has been reserved
    [    0.405101] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
    [    0.405103] system 00:04: [io  0x0840-0x0847] has been reserved
    [    0.405107] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.405229] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.405233] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
    [    0.405236] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.405851] pnp: PnP ACPI: found 6 devices
    [    0.414505] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
    [    0.414551] pci 0000:00:04.0: PCI bridge to [bus 01]
    [    0.414556] pci 0000:00:04.0:   bridge window [io  0x2000-0x2fff]
    [    0.414562] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
    [    0.414569] pci 0000:00:05.0: PCI bridge to [bus 02]
    [    0.414574] pci 0000:00:05.0:   bridge window [mem 0xf0000000-0xf00fffff]
    [    0.414582] pci 0000:00:14.4: PCI bridge to [bus 03]
    [    0.414599] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
    [    0.414601] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
    [    0.414604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [    0.414606] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
    [    0.414609] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
    [    0.414611] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
    [    0.414613] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
    [    0.414615] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
    [    0.414618] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
    [    0.414620] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
    [    0.414622] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
    [    0.414624] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
    [    0.414627] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
    [    0.414629] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
    [    0.414631] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
    [    0.414633] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff window]
    [    0.414636] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
    [    0.414638] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
    [    0.414641] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf00fffff]
    [    0.414643] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
    [    0.414646] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
    [    0.414648] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
    [    0.414650] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff window]
    [    0.414653] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff window]
    [    0.414655] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff window]
    [    0.414657] pci_bus 0000:03: resource 10 [mem 0x000d0000-0x000d3fff window]
    [    0.414659] pci_bus 0000:03: resource 11 [mem 0x000d4000-0x000d7fff window]
    [    0.414662] pci_bus 0000:03: resource 12 [mem 0x000d8000-0x000dbfff window]
    [    0.414664] pci_bus 0000:03: resource 13 [mem 0x000dc000-0x000dffff window]
    [    0.414666] pci_bus 0000:03: resource 14 [mem 0x000e0000-0x000e3fff window]
    [    0.414668] pci_bus 0000:03: resource 15 [mem 0x000e4000-0x000e7fff window]
    [    0.414671] pci_bus 0000:03: resource 16 [mem 0x000e8000-0x000ebfff window]
    [    0.414673] pci_bus 0000:03: resource 17 [mem 0x000ec000-0x000effff window]
    [    0.414675] pci_bus 0000:03: resource 18 [mem 0xe0000000-0xf7ffffff window]
    [    0.414677] pci_bus 0000:03: resource 19 [mem 0xfc000000-0xffffffff window]
    [    0.414774] NET: Registered protocol family 2
    [    0.415012] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.415224] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.415600] TCP: Hash tables configured (established 65536 bind 65536)
    [    0.415661] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.415728] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.415925] NET: Registered protocol family 1
    [    0.415947] pci 0000:00:01.0: Video device with shadowed ROM
    [    1.268637] pci 0000:01:00.0: [Firmware Bug]: VPD access disabled
    [    1.268648] PCI: CLS 64 bytes, default 64
    [    1.268721] Unpacking initramfs...
    [    2.734363] Freeing initrd memory: 11340K (ffff8800369ca000 - ffff8800374dd000)
    [    2.734412] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    2.734415] software IO TLB [mem 0xbb486000-0xbf486000] (64MB) mapped at [ffff8800bb486000-ffff8800bf485fff]
    [    2.734490] LVT offset 0 assigned for vector 0x400
    [    2.734512] perf: AMD IBS detected (0x000000ff)
    [    2.734576] Scanning for low memory corruption every 60 seconds
    [    2.734829] kgr: successfully initialized
    [    2.735099] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [    2.735167] audit: initializing netlink subsys (disabled)
    [    2.735191] audit: type=2000 audit(1484499036.620:1): initialized
    [    2.735837] HugeTLB registered 1 GB page size, pre-allocated 0 pages
    [    2.735845] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    2.735904] zbud: loaded
    [    2.736173] VFS: Disk quotas dquot_6.6.0
    [    2.736196] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    2.736300] Key type big_key registered
    [    2.737289] Key type asymmetric registered
    [    2.737297] Asymmetric key parser 'x509' registered
    [    2.737360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    2.737448] io scheduler noop registered
    [    2.737451] io scheduler deadline registered
    [    2.737458] io scheduler cfq registered (default)
    [    2.737462] start plist test
    [    2.740701] end plist test
    [    2.741126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    2.741133] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    2.741157] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [    2.741159] vesafb: scrolling: redraw
    [    2.741161] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [    2.741177] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
    [    2.747985] Console: switching to colour frame buffer device 128x48
    [    2.754463] fb0: VESA VGA frame buffer device
    [    2.754527] GHES: HEST is not enabled!
    [    2.754735] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
    [    2.757764] Non-volatile memory driver v1.3
    [    2.757825] Linux agpgart interface v0.103
    [    2.758197] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    [    2.766616] i8042: Detected active multiplexing controller, rev 1.1
    [    2.771359] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.771367] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    2.771404] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    2.771433] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    2.771462] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    2.771808] mousedev: PS/2 mouse device common for all mice
    [    2.772079] rtc_cmos 00:01: RTC can wake from S4
    [    2.772295] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [    2.772327] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
    [    2.772346] ledtrig-cpu: registered to indicate activity on CPUs
    [    2.772369] hidraw: raw HID events driver (C) Jiri Kosina
    [    2.772546] NET: Registered protocol family 10
    [    2.772992] microcode: CPU0: patch_level=0x03000027
    [    2.773003] microcode: CPU1: patch_level=0x03000027
    [    2.773053] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [    2.773288] registered taskstats version 1
    [    2.773333] zswap: loaded using pool lzo/zbud
    [    2.773350] page_owner is disabled
    [    2.778320] Key type encrypted registered
    [    2.778333] AppArmor: AppArmor sha1 policy hashing enabled
    [    2.778339] ima: No TPM chip found, activating TPM-bypass!
    [    2.778367] evm: HMAC attrs: 0x1
    [    2.778764]   Magic number: 1:580:843
    [    2.778869] rtc_cmos 00:01: setting system clock to 2017-01-15 16:50:37 UTC (1484499037)
    [    2.778994] PM: Checking hibernation image partition /dev/sda1
    [    2.799667] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    3.679215] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
    [    3.732278] tsc: Refined TSC clocksource calibration: 1896.551 MHz
    [    3.732291] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36ace39d3cd, max_idle_ns: 881590589869 ns
    [    3.767549] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
    [    3.823804] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
    [    3.829932] PM: Hibernation image not present or could not be loaded.
    [    3.831684] Freeing unused kernel memory: 2052K (ffffffff81f5a000 - ffffffff8215b000)
    [    3.831693] Write protecting the kernel read-only data: 14336k
    [    3.832574] Freeing unused kernel memory: 1972K (ffff880001613000 - ffff880001800000)
    [    3.835887] Freeing unused kernel memory: 1180K (ffff880001cd9000 - ffff880001e00000)
    [    3.840586] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
    [    3.840862] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
    [    3.840889] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
    [    3.842001] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [    3.842241] systemd[1]: Detected architecture x86-64.
    [    3.842246] systemd[1]: Running in initial RAM disk.
    [    3.842278] systemd[1]: Set hostname to <linux-fmf2>.
    [    3.900516] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
    [    3.900546] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
    Geändert von 18301 (15.01.17 um 18:29 Uhr)

  9. #9
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Beiträge
    28
    Jetzt muss ich mal dumm fragen: Wie kann man den Treiber installieren???

  10. #10
    Organisiertes Chaos
    Registriert seit
    Jul 2011
    Ort
    OWL
    Beiträge
    338
    Zitat Zitat von 18301 Beitrag anzeigen
    Jetzt muss ich mal dumm fragen: Wie kann man den Treiber installieren???
    Der wurde wahrscheinlich schon bei der Installation von openSUSE mitinstalliert, da im Kernel enthalten und (mittlerweile) ohne bessere Alternativen. Bei der Ausgabe von
    Code:
    /sbin/lspci -nnk | grep -iA3 vga
    sollte „radeon“ zum Vorschein kommen, es sei denn du nutzt was anderes als den AMD A4 für die Grafikausgabe.

  11. #11
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Beiträge
    28
    Hallo

    erst vielen dank für die ganze Hilfe!
    Code:
    00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex [1022:1705]
            Subsystem: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex [1022:1705]
    00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Sumo [Radeon HD 6480G] [1002:9649]
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: radeon
            Kernel modules: radeon
    00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] [1002:1714]
            Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] [1002:1714]
            Kernel driver in use: snd_hda_intel
            Kernel modules: snd_hda_intel
    00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port [1022:1709]
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port [1022:170a]
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7801]
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ahci
            Kernel modules: ahci
    00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ohci-pci
            Kernel modules: ohci_pci
    00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ehci-pci
            Kernel modules: ehci_pci
    00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ohci-pci
            Kernel modules: ohci_pci
    00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ehci-pci
            Kernel modules: ehci_pci
    00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:780b] (rev 13)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel modules: i2c_piix4
    00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 01)                                                                                      
            Subsystem: Toshiba America Info Systems Device [1179:fc50]                                                                                                                              
            Kernel driver in use: snd_hda_intel                                                                                                                                                     
            Kernel modules: snd_hda_intel                                                                                                                                                           
    00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:780e] (rev 11)                                                                                               
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
    00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge [1022:780f] (rev 40)
    00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7809] (rev 11)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ohci-pci
            Kernel modules: ohci_pci
    00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ohci-pci
            Kernel modules: ohci_pci
    00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: ehci-pci
            Kernel modules: ehci_pci
    00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
    00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701]
    00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702]
    00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703]
            Kernel driver in use: k10temp
            Kernel modules: k10temp
    00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704]
    00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718]
    00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716]
    00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719]
    01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
            Subsystem: Toshiba America Info Systems Device [1179:fc50]
            Kernel driver in use: atl1c
            Kernel modules: atl1c
    02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
            Subsystem: Lite-On Communications Inc Device [11ad:6613]
            Kernel driver in use: ath9k
            Kernel modules: ath9k

  12. #12
    kleine schwester von root Avatar von corresponder
    Registriert seit
    May 2002
    Ort
    192.67.198.56
    Beiträge
    3.797
    spuckt "glxinfo"
    was auf der konsole aus?

    gruss

    c.
    _______________________________________

    www.audio4linux.de - musik machen mit offenen quellen!

  13. #13
    Mod. FAQ/Howto/Emulation
    Registriert seit
    Sep 2000
    Beiträge
    17.044
    Nochmal zur Frage oben: Anscheinend hat das Gerät (oder soll ich eher Gurke sagen?) KDE. Wieviel RAM hat das Gerät denn? Ist das so ein Lowcost Netbook?

  14. #14
    kleine schwester von root Avatar von corresponder
    Registriert seit
    May 2002
    Ort
    192.67.198.56
    Beiträge
    3.797
    <quote>KiB Mem: 5569076 total, 2415540 used, 3153536 free, 2104 buffers</quote>

    gruss

    c.
    _______________________________________

    www.audio4linux.de - musik machen mit offenen quellen!

  15. #15
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Beiträge
    28
    Hallo

    es ist Toshiba Laptop. Satellite L750D.
    Bei glxinfo kommt nix.
    Ich denke es hat 4 GB Ram

Ähnliche Themen

  1. XVideo zieht viel CPU-Leistung (30% auf Sempron 3100+)
    Von shbgr im Forum System installieren und konfigurieren
    Antworten: 0
    Letzter Beitrag: 21.06.06, 23:58
  2. amarok zieht viel zuviel cpu-leistung
    Von therealmisterx im Forum Musik
    Antworten: 4
    Letzter Beitrag: 27.11.05, 12:33
  3. Welcher Dienst/welches Prog zieht wieviel RAM?
    Von HyperSurf im Forum System installieren und konfigurieren
    Antworten: 14
    Letzter Beitrag: 02.12.04, 22:39
  4. Antworten: 6
    Letzter Beitrag: 13.04.04, 15:57
  5. Welches Backup-Programm nutzt Ihr (welches ist das "beste") ??
    Von Basti_litho im Forum System installieren und konfigurieren
    Antworten: 5
    Letzter Beitrag: 24.04.02, 08:47

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •