Hello,
habe mir grade einen wlan-Stick gekauft und der will nicht erkannt werden.
Hier mal ein Link zur Produktseite vom USB-Stick.
Jetzt glaube ich dass zu wenig Saft auf meinen USB-Ports ist,
weil der Stick sollte eigentlich leuchtfuchteln aber das tut er nicht.
Wie findet man raus ob usb3.0 aktiv ist ?
Code:
$ lsusb
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 1532:0007 Razer USA, Ltd DeathAdder Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 2357:0101
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 046d:c24d Logitech, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Ist Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub mein USB3.0 ?
Ich glaube der Stick hängt an Bus 003 Device 005: ID 2357:0101.
Angeschlossen ist er an einem USB3.0-Kabel und das Kabel hängt wiederum an einen der zwei blauen USB-Ports von Motherboard.
Unter Windoof funzt es so.
Hier noch etwas genauere Info zum Stick...
Code:
$ lsusb -v
...
Bus 003 Device 006: ID 2357:0101
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2357
idProduct 0x0101
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
....
USB2.0 und 1.0 funktioniert tadellos!
Unter Linux habe ich keine Treiber installiert, weil es ja ein AC Chip ist und der sollte so funktionieren.
Code:
# lspci | grep -i usb
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
02:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
udev und udev-finish läuft als Domäne.
In der Log-Datei steht folgendes ...
Code:
# cat /var/log/kernel.log | grep -i usb
...
Dec 2 17:00:52 antec kernel: [ 2.206489] usbcore: registered new interface driver usbfs
Dec 2 17:00:52 antec kernel: [ 2.206506] usbcore: registered new interface driver hub
Dec 2 17:00:52 antec kernel: [ 2.207172] usbcore: registered new device driver usb
Dec 2 17:00:52 antec kernel: [ 2.207837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 2 17:00:52 antec kernel: [ 2.208312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 2 17:00:52 antec kernel: [ 2.208468] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
Dec 2 17:00:52 antec kernel: [ 2.220457] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
...
Dec 2 17:00:52 antec kernel: [ 2.488187] hub 9-0:1.0: USB hub found
Dec 2 17:00:52 antec kernel: [ 2.791527] usb 1-5: new high-speed USB device number 3 using ehci-pci
Dec 2 17:00:52 antec kernel: [ 2.924196] usb 1-5: New USB device found, idVendor=2357, idProduct=0101
Dec 2 17:00:52 antec kernel: [ 2.924199] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 2 17:00:52 antec kernel: [ 2.924200] usb 1-5: Product: 802.11n NIC
Dec 2 17:00:52 antec kernel: [ 2.924202] usb 1-5: Manufacturer: Realtek
Dec 2 17:00:52 antec kernel: [ 2.924203] usb 1-5: SerialNumber: 123456
...
Ffolgendes System nutze ich ...
Code:
$ lsb_release -ds
Debian GNU/Linux 8.6 (jessie)
Fehlen noch irgend welche Infos ?
Wo ist mein USB3.0 ?
HALP \o/
Lesezeichen