Code:
[ 1.171526] usbcore: registered new interface driver usbfs
[ 1.171536] usbcore: registered new interface driver hub
[ 1.176067] pata_amd 0000:00:06.0: version 0.4.1
[ 1.178342] usbcore: registered new device driver usb
[ 1.178762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.179419] ehci-pci: EHCI PCI platform driver
[ 1.179457] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.181946] scsi0 : pata_amd
[ 1.182066] scsi1 : pata_amd
[ 1.182111] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.182113] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.182265] [drm] Initialized drm 1.1.0 20060810
[ 1.182277] sata_nv 0000:00:08.0: version 3.5
[ 1.182529] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.182968] scsi2 : sata_nv
[ 1.183060] scsi3 : sata_nv
[ 1.183092] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[ 1.183093] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[ 1.183265] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 1.183552] scsi4 : sata_nv
[ 1.183622] scsi5 : sata_nv
[ 1.183655] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[ 1.183656] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[ 1.183747] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 1.183754] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.183762] ehci-pci 0000:00:02.1: debug port 1
[ 1.183793] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 1.183811] ehci-pci 0000:00:02.1: irq 22, io mem 0xf7ffec00
[ 1.184573] wmi: Mapper loaded
[ 1.189203] checking generic (f9000000 280000) vs hw (e0000000 10000000)
[ 1.189207] checking generic (f9000000 280000) vs hw (f8000000 2000000)
[ 1.189208] fb: switching to nouveaufb from VESA VGA
[ 1.189237] Console: switching to colour dummy device 80x25
[ 1.190203] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 1.190813] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x086100a2
[ 1.190817] nouveau [ DEVICE][0000:02:00.0] Chipset: G86 (NV86)
[ 1.190818] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 1.190842] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 1.195050] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.195112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.195114] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.195116] usb usb1: Product: EHCI Host Controller
[ 1.195117] usb usb1: Manufacturer: Linux 3.16.7-7-default ehci_hcd
[ 1.195119] usb usb1: SerialNumber: 0000:00:02.1
[ 1.195244] hub 1-0:1.0: USB hub found
[ 1.195249] hub 1-0:1.0: 10 ports detected
[ 1.235429] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 1.235431] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 1.235532] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 1.235534] nouveau [ VBIOS][0000:02:00.0] version 60.86.26.00.09
[ 1.255542] nouveau 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.255549] nouveau [ PMC][0000:02:00.0] MSI interrupts enabled
[ 1.255576] nouveau [ PFB][0000:02:00.0] RAM type: DDR2
[ 1.255578] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
[ 1.255579] nouveau [ PFB][0000:02:00.0] ZCOMP: 1292 tags
[ 1.256231] nouveau [ VOLT][0000:02:00.0] GPU voltage: 1320000uv
[ 1.256906] ohci-pci: OHCI PCI platform driver
[ 1.257027] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 1.257033] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.257064] ohci-pci 0000:00:02.0: irq 23, io mem 0xf7fff000
[ 1.295886] nouveau [ PTHERM][0000:02:00.0] FAN control: PWM
[ 1.295899] nouveau [ PTHERM][0000:02:00.0] fan management: automatic
[ 1.295926] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
[ 1.295945] nouveau [ CLK][0000:02:00.0] 20: core 459 MHz shader 918 MHz memory 400 MHz
[ 1.295981] nouveau [ CLK][0000:02:00.0] --: core 459 MHz shader 918 MHz memory 399 MHz
[ 1.296158] [TTM] Zone kernel: Available graphics memory: 4095700 kiB
[ 1.296159] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.296160] [TTM] Initializing pool allocator
[ 1.296165] [TTM] Initializing DMA pool allocator
[ 1.296175] nouveau [ DRM] VRAM: 256 MiB
[ 1.296176] nouveau [ DRM] GART: 1048576 MiB
[ 1.296180] nouveau [ DRM] TMDS table version 2.0
[ 1.296181] nouveau [ DRM] DCB version 4.0
[ 1.296183] nouveau [ DRM] DCB outp 00: 02000300 00000028
[ 1.296185] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 1.296186] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 1.296187] nouveau [ DRM] DCB outp 03: 010223f1 00c0c083
[ 1.296189] nouveau [ DRM] DCB conn 00: 1030
[ 1.296191] nouveau [ DRM] DCB conn 01: 0100
[ 1.296192] nouveau [ DRM] DCB conn 02: 0210
[ 1.296193] nouveau [ DRM] DCB conn 03: 0211
[ 1.296194] nouveau [ DRM] DCB conn 04: 0213
[ 1.296195] nouveau [ DRM] DCB conn 05: 0362
[ 1.303140] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 1.303142] nouveau W[ DRM] TV-1 has no encoders, removing
[ 1.303178] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.303179] [drm] Driver supports precise vblank timestamp query.
[ 1.313349] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.313354] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.313355] usb usb2: Product: OHCI PCI host controller
[ 1.313357] usb usb2: Manufacturer: Linux 3.16.7-7-default ohci_hcd
[ 1.313358] usb usb2: SerialNumber: 0000:00:02.0
[ 1.313507] hub 2-0:1.0: USB hub found
[ 1.313515] hub 2-0:1.0: 10 ports detected
[ 1.351570] ata1.00: ATAPI: LITE-ON LTR-52327S, QS04, max UDMA/33
[ 1.351577] ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H50L, 1.00, max UDMA/66
[ 1.351582] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c50000) ACPI=0x701f (60:30:0x15)
[ 1.351585] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc0c50000) ACPI=0x1f01f (60:30:0x15)
[ 1.367503] ata1.00: configured for UDMA/33
[ 1.383636] ata1.01: configured for UDMA/66
[ 1.402545] scsi 0:0:0:0: CD-ROM LITE-ON LTR-52327S QS04 PQ: 0 ANSI: 5
[ 1.420661] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.422067] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H50L 1.00 PQ: 0 ANSI: 5
[ 1.422989] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.423068] ata2: port disabled--ignoring
[ 1.505767] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.507532] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.561357] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 1.633951] nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff88021b491800
[ 1.634088] fbcon: nouveaufb (fb0) is primary device
[ 1.640788] usb 1-1: New USB device found, idVendor=2013, idProduct=0258
[ 1.640789] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.640790] usb 1-1: Product: PCTV 461
[ 1.640791] usb 1-1: Manufacturer: PCTV
[ 1.640792] usb 1-1: SerialNumber: 0011358374
[ 1.655757] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.664339] ata3.00: ATA-8: MAXTOR STM3500320AS, MX1A, max UDMA/133
[ 1.664341] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.680206] ata3.00: configured for UDMA/133
[ 1.680367] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM350032 MX1A PQ: 0 ANSI: 5
[ 1.680586] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.680627] sd 2:0:0:0: [sda] Write Protect is off
[ 1.680629] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.680647] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.680694] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.701086] Console: switching to colour frame buffer device 240x67
[ 1.702781] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 1.702782] nouveau 0000:02:00.0: registered panic notifier
[ 1.707852] [drm] Initialized nouveau 1.1.2 20120801 for 0000:02:00.0 on minor 0
[ 1.751918] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.771917] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 1.772514] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.904448] usb 1-2: New USB device found, idVendor=0c0b, idProduct=b159
[ 1.904453] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.904454] usb 1-2: Product: External HDD
[ 1.904456] usb 1-2: Manufacturer: DMI
[ 1.904457] usb 1-2: SerialNumber: 00efd94f
[ 1.907497] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 1.907591] scsi6 : usb-storage 1-2:1.0
[ 1.907659] usbcore: registered new interface driver usb-storage
[ 1.907903] usbcore: registered new interface driver uas
[ 1.932153] tsc: Refined TSC clocksource calibration: 3214.818 MHz
[ 2.148485] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.156786] ata4.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133
[ 2.156790] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.172829] ata4.00: configured for UDMA/133
[ 2.173036] scsi 3:0:0:0: Direct-Access ATA Hitachi HTS54505 C60F PQ: 0 ANSI: 5
[ 2.173395] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.173501] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.173665] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.173668] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.173700] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.468983] usb 2-3: new full-speed USB device number 2 using ohci-pci
[ 2.495234] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.643466] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
[ 2.644138] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.676587] sr0: scsi3-mmc drive: 46x/52x writer cd/rw xa/form2 cdda tray
[ 2.676593] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.676879] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.680309] usb 2-3: New USB device found, idVendor=05e3, idProduct=0604
[ 2.680314] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.680316] usb 2-3: Product: USB Hub
[ 2.683384] hub 2-3:1.0: USB hub found
[ 2.686310] hub 2-3:1.0: 4 ports detected
[ 2.692380] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.692665] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 2.914460] scsi 6:0:0:0: Direct-Access SAMSUNG HD103SJ PQ: 0 ANSI: 2
[ 2.914856] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.915934] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.918486] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.918492] sd 6:0:0:0: [sdc] Mode Sense: 38 00 00 00
[ 2.921105] sd 6:0:0:0: [sdc] No Caching mode page found
[ 2.921124] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.933753] Switched to clocksource tsc
[ 2.935528] sdc: sdc1
[ 2.950529] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.994778] usb 2-3.1: new low-speed USB device number 3 using ohci-pci
[ 3.009106] random: nonblocking pool is initialized
[ 3.107943] usb 2-3.1: New USB device found, idVendor=1c4f, idProduct=0034
[ 3.107948] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.107950] usb 2-3.1: Product: Usb Mouse
[ 3.107951] usb 2-3.1: Manufacturer: SIGMACHIP
[ 3.119151] usbcore: registered new interface driver usbhid
[ 3.119155] usbhid: USB HID core driver
[ 3.119947] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:1C4F:0034.0001/input/input3
[ 3.120032] hid-generic 0003:1C4F:0034.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:02.0-3.1/input0
[ 3.187067] usb 2-3.2: new full-speed USB device number 4 using ohci-pci
[ 3.311222] usb 2-3.2: New USB device found, idVendor=04f9, idProduct=02c2
[ 3.311227] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.311229] usb 2-3.2: Product: DCP-J4110DW
[ 3.311230] usb 2-3.2: Manufacturer: Brother
[ 3.311232] usb 2-3.2: SerialNumber: BROF4F284178
[ 3.314414] usb-storage 2-3.2:1.2: USB Mass Storage device detected
[ 3.314889] scsi7 : usb-storage 2-3.2:1.2
[ 4.265962] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.265968] PM: Marking nosave pages: [mem 0xd7fb0000-0xffffffff]
[ 4.266322] PM: Marking nosave pages: [mem 0xcc000000-0xcfffffff]
[ 4.266507] PM: Basic memory bitmaps created
[ 4.287841] PM: Basic memory bitmaps freed
[ 4.291362] PM: Starting manual resume from disk
[ 4.291369] PM: Hibernation image partition 8:6 present
[ 4.291370] PM: Looking for hibernation image.
[ 4.292307] PM: Image not found (code -22)
[ 4.292311] PM: Hibernation image not present or could not be loaded.
[ 4.334792] scsi 7:0:0:0: Direct-Access Brother DCP-J4110DW 1.00 PQ: 0 ANSI: 2
[ 4.335014] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 4.415884] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 4.436709] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
[ 7.225525] device-mapper: uevent: version 1.0.3
[ 7.225601] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 9.474710] EXT4-fs (sda12): re-mounted. Opts: acl,user_xattr
[ 9.660251] i2c i2c-3: nForce2 SMBus adapter at 0x600
[ 9.660269] i2c i2c-4: nForce2 SMBus adapter at 0x700
[ 9.778671] MCE: In-kernel MCE decoding enabled.
[ 9.779110] EDAC MC: Ver: 3.0.0
[ 9.780630] AMD64 EDAC driver v3.4.0
[ 9.780664] EDAC amd64: DRAM ECC disabled.
[ 9.780670] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 9.801649] parport_pc 00:01: reported by Plug and Play ACPI
[ 9.801703] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 9.804181] kvm: Nested Virtualization enabled
[ 9.804185] kvm: Nested Paging enabled
[ 9.869307] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 9.869321] snd_hda_intel 0000:00:05.0: Disabling MSI
[ 9.976176] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.005450] Linux video capture interface: v2.00
[ 10.023841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.167098] ppdev: user-space parallel port driver
[ 10.215018] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 10.215276] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 10.337832] usblp 2-3.2:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x02C2
[ 10.337859] usbcore: registered new interface driver usblp
[ 10.476863] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 10.476867] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.476870] sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 10.476871] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.476872] sound hdaudioC0D0: inputs:
[ 10.476874] sound hdaudioC0D0: Rear Mic=0x1a
[ 10.476875] sound hdaudioC0D0: Front Mic=0x1e
[ 10.476877] sound hdaudioC0D0: Line=0x1b
[ 10.476878] sound hdaudioC0D0: CD=0x1f
[ 10.591822] bttv: driver version 0.9.19 loaded
[ 10.591827] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.591862] bttv: Bt8xx card found (0)
[ 10.592089] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 10.592109] bttv: 0: Bt878 (rev 17) at 0000:01:08.0, irq: 18, latency: 32, mmio: 0xdffff000
[ 10.592122] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 10.592123] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected]
[ 10.594667] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 10.625880] tveeprom 5-0050: Hauppauge model 44804, rev D183, serial# 7478518
[ 10.625896] tveeprom 5-0050: tuner model is TCL 2002MB 3 (idx 83, type 37)
[ 10.625898] tveeprom 5-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
[ 10.625899] tveeprom 5-0050: audio processor is None (idx 0)
[ 10.625900] tveeprom 5-0050: has no radio
[ 10.625902] bttv: 0: Hauppauge eeprom indicates model#44804
[ 10.625903] bttv: 0: tuner type=37
[ 10.648131] bttv: 0: audio absent, no audio device found!
[ 10.654416] tuner 5-0061: Tuner -1 found with type(s) Radio TV.
[ 10.656523] tuner-simple 5-0061: creating new instance
[ 10.656527] tuner-simple 5-0061: type set to 37 (LG PAL (newer TAPC series))
[ 10.657853] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[ 10.692804] bttv: PLL set ok
[ 10.693567] bttv: 0: registered device video0
[ 10.693594] bttv: 0: registered device vbi0
[ 10.737967] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr bc:5f:f4:01:da:71
[ 10.737975] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 10.847845] fuse init (API version 7.23)
[ 11.174491] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[ 11.174548] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 11.174596] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 11.773158] em28xx: New device PCTV PCTV 461 @ 480 Mbps (2013:0258, interface 0, class 0)
[ 11.773163] em28xx: DVB interface 0 found: isoc
[ 11.773366] em28xx: chip ID is em28178
[ 12.060070] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k FS
[ 12.144843] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x003c7ba0
[ 12.144848] em28178 #0: EEPROM info:
[ 12.144849] em28178 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 12.153433] em28178 #0: AC97 audio (5 sample rates)
[ 12.153438] em28178 #0: 500mA max power
[ 12.153440] em28178 #0: Table at offset 0x27, strings=0x148c, 0x1874, 0x0a6a
[ 12.153502] em28178 #0: Identified as PCTV DVB-S2 Stick (461e) (card=92)
[ 12.153504] em28178 #0: dvb set to isoc mode.
[ 12.153537] usbcore: registered new interface driver em28xx
[ 12.156557] em28178 #0: Binding DVB extension
[ 12.163519] i2c i2c-7: Added multiplexed i2c bus 8
[ 12.186742] m88ts2022 8-0060: m88ts2022: Montage M88TS2022 successfully identified
[ 12.189491] i2c i2c-7: a8293: Allegro A8293 SEC attached
[ 12.189498] DVB: registering new adapter (em28178 #0)
[ 12.189505] usb 1-1: DVB: registering adapter 0 frontend 0 (Montage M88DS3103)...
[ 12.192070] em28178 #0: DVB extension successfully initialized
[ 12.192075] em28xx: Registered (Em28xx dvb Extension) extension
[ 12.193940] em28178 #0: Registering input extension
[ 12.219462] Registered IR keymap rc-pinnacle-pctv-hd
[ 12.219565] input: em28xx IR (em28178 #0) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/rc/rc0/input8
[ 12.219638] rc0: em28xx IR (em28178 #0) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/rc/rc0
[ 12.220753] em28178 #0: Input extension successfully initalized
[ 12.220757] em28xx: Registered (Em28xx Input Extension) extension
[ 12.454896] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[ 12.454916] REISERFS (device sda7): using ordered data mode
[ 12.454917] reiserfs: using flush barriers
[ 12.455329] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.455974] REISERFS (device sda7): checking transaction log (sda7)
[ 12.676169] floppy0: no floppy controllers found
[ 12.716364] REISERFS (device sda7): replayed 1 transactions in 1 seconds
[ 12.906646] EXT4-fs (sdb11): mounted filesystem with ordered data mode. Opts: (null)
[ 13.072019] REISERFS (device sdb7): found reiserfs format "3.6" with standard journal
[ 13.072035] REISERFS (device sdb7): using ordered data mode
[ 13.072037] reiserfs: using flush barriers
[ 13.082875] REISERFS (device sdb7): journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.083479] REISERFS (device sdb7): checking transaction log (sdb7)
[ 13.137974] REISERFS (device sdb9): found reiserfs format "3.6" with standard journal
[ 13.137996] REISERFS (device sdb9): using ordered data mode
[ 13.137997] reiserfs: using flush barriers
[ 13.146393] REISERFS (device sdb9): journal params: device sdb9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.146998] REISERFS (device sdb9): checking transaction log (sdb9)
[ 13.161634] EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: (null)
[ 13.216506] REISERFS (device sdb8): found reiserfs format "3.6" with standard journal
[ 13.216527] REISERFS (device sdb8): using ordered data mode
[ 13.216528] reiserfs: using flush barriers
[ 13.224381] REISERFS (device sdb8): journal params: device sdb8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.225035] REISERFS (device sdb8): checking transaction log (sdb8)
[ 13.255318] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 13.294456] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 13.317312] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.326626] REISERFS (device sda7): Using r5 hash to sort names
[ 13.396779] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 13.402567] REISERFS (device sdb7): Using r5 hash to sort names
[ 13.447206] REISERFS (device sdb8): Using r5 hash to sort names
[ 13.492059] REISERFS (device sdb9): Using r5 hash to sort names
[ 13.629214] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 13.629231] REISERFS (device sda8): using ordered data mode
[ 13.629232] reiserfs: using flush barriers
[ 13.629600] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.630196] REISERFS (device sda8): checking transaction log (sda8)
[ 13.942053] REISERFS (device sda9): found reiserfs format "3.6" with standard journal
[ 13.942070] REISERFS (device sda9): using ordered data mode
[ 13.942071] reiserfs: using flush barriers
[ 13.942556] REISERFS (device sda9): journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.943151] REISERFS (device sda9): checking transaction log (sda9)
[ 14.026342] REISERFS (device sda8): Using r5 hash to sort names
[ 14.048723] REISERFS (device sda9): Using r5 hash to sort names
[ 14.419281] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[ 15.571079] audit: type=1400 audit(1431926381.069:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=751 comm="apparmor_parser"
[ 15.581901] audit: type=1400 audit(1431926381.081:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=758 comm="apparmor_parser"
[ 15.589487] audit: type=1400 audit(1431926381.089:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=762 comm="apparmor_parser"
[ 15.596991] audit: type=1400 audit(1431926381.097:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=766 comm="apparmor_parser"
[ 15.605458] audit: type=1400 audit(1431926381.105:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=771 comm="apparmor_parser"
[ 15.614355] audit: type=1400 audit(1431926381.113:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=775 comm="apparmor_parser"
[ 15.614361] audit: type=1400 audit(1431926381.113:8): apparmor="STATUS" operation="profile_load" name="DEFAULT_URI" pid=775 comm="apparmor_parser"
[ 15.614364] audit: type=1400 audit(1431926381.113:9): apparmor="STATUS" operation="profile_load" name="HANDLING_UNTRUSTED_INPUT" pid=775 comm="apparmor_parser"
[ 15.614366] audit: type=1400 audit(1431926381.113:10): apparmor="STATUS" operation="profile_load" name="phpsysinfo" pid=775 comm="apparmor_parser"
[ 15.621509] audit: type=1400 audit(1431926381.121:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=779 comm="apparmor_parser"
[ 16.159630] NET: Registered protocol family 17
[ 18.958924] No iBFT detected.
[ 19.193464] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[ 19.193498] forcedeth 0000:00:07.0 eth0: MSI enabled
[ 45.438958] i2c i2c-7: m88ds3103: found a 'Montage M88DS3103' in cold state
[ 45.489655] i2c i2c-7: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw'
[ 45.753900] i2c i2c-7: m88ds3103: found a 'Montage M88DS3103' in warm state
[ 45.753905] i2c i2c-7: m88ds3103: firmware version 3.B
[ 49.469462] Bluetooth: Core ver 2.19
[ 49.469483] NET: Registered protocol family 31
[ 49.469485] Bluetooth: HCI device and connection manager initialized
[ 49.469492] Bluetooth: HCI socket layer initialized
[ 49.469494] Bluetooth: L2CAP socket layer initialized
[ 49.469503] Bluetooth: SCO socket layer initialized
[ 49.473696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 49.473700] Bluetooth: BNEP filters: protocol multicast
[ 49.473708] Bluetooth: BNEP socket layer initialized
LSMOD
Code:
Module Size Used by
bnep 19624 2
bluetooth 479177 5 bnep
6lowpan_iphc 18702 1 bluetooth
rfkill 26772 2 bluetooth
iscsi_ibft 12862 0
iscsi_boot_sysfs 16000 1 iscsi_ibft
af_packet 40034 0
reiserfs 258505 6
rc_pinnacle_pctv_hd 12529 0
em28xx_rc 17641 0
a8293 12855 1
m88ts2022 18258 1
m88ds3103 23845 1
i2c_mux 12896 1 m88ds3103
em28xx_dvb 31985 3
dvb_core 129753 2 em28xx_dvb,m88ds3103
em28xx 84619 2 em28xx_dvb,em28xx_rc
fuse 100461 5
tuner_simple 26464 1
tuner_types 24636 1 tuner_simple
tuner 27358 1
tda7432 13260 0
tvaudio 33537 0
msp3400 40283 0
bttv 151594 0
snd_hda_codec_via 27860 1
snd_hda_codec_generic 77129 1 snd_hda_codec_via
usblp 18756 0
btcx_risc 13640 1 bttv
tveeprom 21216 2 bttv,em28xx
videobuf_dma_sg 19262 1 bttv
serio_raw 13434 0
forcedeth 71521 0
ppdev 17671 0
shpchp 32951 0
rc_core 32765 4 bttv,em28xx_rc,rc_pinnacle_pctv_hd
v4l2_common 15265 6 bttv,tuner,tda7432,em28xx,msp3400,tvaudio
videodev 157329 7 bttv,tuner,tda7432,em28xx,msp3400,tvaudio,v4l2_common
videobuf_core 30119 2 bttv,videobuf_dma_sg
pcspkr 12718 0
snd_hda_intel 34475 3
snd_hda_controller 35103 1 snd_hda_intel
snd_hda_codec 151970 4 snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 116916 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 33609 1 snd_pcm
snd 87947 13 snd_hwdep,snd_timer,snd_hda_codec_via,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
parport_pc 41414 0
kvm_amd 64385 0
k10temp 13144 0
edac_core 66387 0
edac_mce_amd 22578 0
kvm 493230 1 kvm_amd
soundcore 15047 2 snd,snd_hda_codec
i2c_nforce2 13234 0
parport 46395 2 ppdev,parport_pc
processor 40484 0
dm_mod 111114 0
hid_generic 12559 0
usbhid 52574 0
sr_mod 22416 0
cdrom 60734 1 sr_mod
uas 27255 0
usb_storage 62302 2 uas
ohci_pci 13570 0
nouveau 1304774 3
video 24419 1 nouveau
mxm_wmi 13021 1 nouveau
wmi 19193 2 mxm_wmi,nouveau
i2c_algo_bit 13413 2 bttv,nouveau
ata_generic 12923 0
drm_kms_helper 65670 1 nouveau
ttm 93506 1 nouveau
drm 335594 6 ttm,drm_kms_helper,nouveau
ehci_pci 12914 0
ohci_hcd 51577 1 ohci_pci
ehci_hcd 79604 1 ehci_pci
sata_nv 31853 15
pata_amd 18230 0
usbcore 256127 10 uas,usblp,em28xx_dvb,usb_storage,em28xx,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
usb_common 13057 1 usbcore
button 13971 1 nouveau
sg 40630 0
LSUSB
Zitieren
Lesezeichen