Hallo,
ich habe jetzt meinen Rechner aufgerüstet. Jetzt mit HDMI Ausgang. Der funktioniert allerdings nur unter WindowsXP. Ich habe schon mehrere Threads zum Thema, aber kein Ergebnis.
flammenflitzer olaf # uname -r
flammenflitzer olaf # lspci | grep Audio
Code:
00:0f.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1)
flammenflitzer olaf # cat /proc/asound/cards
Code:
0 [SAA7134 ]: SAA7134 - SAA7134
saa7134[0] at 0xefdff000 irq 16
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xefff0000 irq 20
2 [NVidia_1 ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xedffc000 irq 16
Grafikkarte
Code:
nVidia GeForce GTX560 Ti
flammenflitzer olaf # aplay -l
Code:
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 1: NVidia [HDA NVidia], Gerät 0: ALC888 Analog [ALC888 Analog]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 1: ALC888 Digital [ALC888 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia_1 [HDA NVidia], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia_1 [HDA NVidia], Gerät 7: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia_1 [HDA NVidia], Gerät 8: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: NVidia_1 [HDA NVidia], Gerät 9: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
flammenflitzer linux # cat /usr/src/linux/.config | grep SND | grep -v \#
Code:
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_PCI=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=
flammenflitzer olaf # lsmod | grep snd
Code:
snd_seq_dummy 1566 0
snd_seq_oss 24382 0
snd_seq_midi_event 5756 1 snd_seq_oss
snd_seq 44361 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5453 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 31178 0
snd_mixer_oss 12805 1 snd_pcm_oss
snd_hda_codec_hdmi 21098 4
snd_hda_codec_realtek 300931 1
snd_hda_intel 21962 4
snd_hda_codec 73076 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5638 1 snd_hda_codec
snd_pcm 65136 6 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,saa7134_alsa,snd_hda_codec
snd_timer 18677 2 snd_seq,snd_pcm
snd_page_alloc 7002 2 snd_hda_intel,snd_pcm
Nachladen der anderen Module bringt nichts
Code:
flammenflitzer olaf # modprobe snd-hda-codec-realtek
flammenflitzer olaf # lsmod | grep snd-hda-codec-realtek
flammenflitzer olaf # modprobe snd-hda-codec-analog
flammenflitzer olaf # modprobe snd-hda-codec-idt
flammenflitzer olaf # modprobe snd-hda-codec-via
flammenflitzer olaf # modprobe snd-hda-codec-hdmi
flammenflitzer olaf # modprobe snd-hda-codec-cirrus
flammenflitzer olaf # modprobe snd-hda-codec-conexant
flammenflitzer olaf # modprobe snd-hda-codec-ca0110
flammenflitzer olaf # modprobe snd-hda-codec-cmedia
flammenflitzer olaf # modprobe snd-hda-codec-si3054
flammenflitzer linux # lsmod | grep snd
Code:
snd_hda_codec_si3054 3432 0
snd_hda_codec_cmedia 8228 0
snd_hda_codec_ca0110 5481 0
snd_hda_codec_conexant 45002 0
snd_hda_codec_cirrus 10205 0
snd_hda_codec_via 53574 0
snd_hda_codec_idt 54732 0
snd_hda_codec_analog 80473 0
snd_seq_dummy 1566 0
snd_seq_oss 24382 0
snd_seq_midi_event 5756 1 snd_seq_oss
snd_seq 44361 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5453 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 31178 0
snd_mixer_oss 12805 1 snd_pcm_oss
snd_hda_codec_hdmi 21098 4
snd_hda_codec_realtek 300931 1
snd_hda_intel 21962 4
snd_hda_codec 73076 11 snd_hda_codec_si3054,snd_hda_codec_cmedia,snd_hda_codec_ca0110,snd_hda_codec_conexant,
snd_hda_codec_cirrus,snd_hda_codec_via,snd_hda_codec_idt,snd_hda_codec_analog,snd_hda_codec_hdmi,snd_hda_codec_realtek,
snd_hda_intel
snd_hwdep 5638 1 snd_hda_codec
snd_pcm 65136 7 snd_hda_codec_si3054,snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,saa7134_alsa,snd_hda_codec
snd_timer 18677 2 snd_seq,snd_pcm
snd_page_alloc 7002 2 snd_hda_intel,snd_pcm
alsa lässt sich nicht konfigurieren
flammenflitzer olaf #alsaconf
Code:
No supported PnP or PCI card found
...
No legacy drivers are avaiable
Code:
flammenflitzer olaf # cat /etc/modprobe.d/alsa.conf
cat: /etc/modprobe.d/alsa.conf: Datei oder Verzeichnis nicht gefunden
In /etc/make.conf ist USE=" ...pulseaudio ..." gesetzt. kde 4.7.3. Weitere Software
Code:
[ebuild R ~] media-sound/pulseaudio-1.1 USE="X alsa asyncns avahi caps dbus equalizer glib ipv6 libsamplerate lirc orc tcpd udev -bluetooth -doc -gnome -jack (-oss) -realtime (-system-wide) -test" 0 kB
[ebuild R ] media-plugins/gst-plugins-pulse-0.10.30 0 kB
[ebuild R ~] media-libs/phonon-4.5.1-r1 USE="gstreamer pulseaudio (-aqua) -debug -vlc -xine" 0 kB
[ebuild R ~] media-libs/phonon-gstreamer-4.5.1 USE="alsa -debug" 0 kB
[ebuild R ~] kde-base/phonon-kde-4.7.3 USE="alsa pulseaudio (-aqua) -debug (-kdeenablefinal) -xine" 0 kB
Wird die Ausgabe von cat /etc/asound.state benötigt?
Ich weiß nicht, ob das eine Rolle spielt? Die Bildschirme sind konfiguriert als separate Monitore. xorg.conf kann ich bei Bedarf posten.
Zitieren
Lesezeichen