Anzeige:
Ergebnis 1 bis 4 von 4

Thema: kde4 und Compiz laufen nicht openSUSE 11.1

  1. #1
    Registrierter Benutzer
    Registriert seit
    Oct 2004
    Beiträge
    320

    kde4 und Compiz laufen nicht openSUSE 11.1

    Hallo Linuxgemeinde

    das ist ein Duplikat des Threads
    http://www.linuxforen.de/forums/showthread.php?t=262087
    gehört glaub ich inhaltlich besser unter Windowmanager:

    habe folgendes komisches Problem nach Installation des nvidia-Treibers auf meinem System:
    openSUSE 11.1 x86_64 Nvidia GeForce 9600 GT Kernelmodul 3.0.0 NVIDIA 180.51
    Kernel 2.6.27.23-0.1-trace
    SessionType Standard KDE 3.5.10 "release 21.11".

    Ich habe die Installation als One-click-Installation von hier http://opensuse-community.org/nvidia.ymp durchgeführt, nachdem die Installation über das YAST-Repo nicht funktioniert hatte (schwarzer Bildschirm, Sax-Fehler). Das klappte dann, allerdings fiel auf, dass die menu.lst offensichtlich verändert wurde. Man musste grub jetzt mit dem o.g. offensichtlich neu gebauten Kernel mit dem Suffix "trace" starten, default funktioniert nicht mehr.
    Damit laufen die 3D-Effekte, googleearth, 3D-Spiele usw. scheinen einwandfrei, die Eingabe glxinfo | grep rendering gibt "yes" aus.

    Nun gibt es aber zwei Probleme, die - wie ich vermute - miteinander zusammenhängen:

    1. KDM bietet bei Session Type keine Auswahl von kde4 oder gnome mehr an (obwohl beide installiert sind). Da ich früher oder später auf kde4 umsteigen möchte, wäre ich froh, wenn mir jemeand einen Hinweis geben könnte, wie ich das wieder "aktivieren" kann. Bei der Betriebssysteminstallation hatte ich kde3.5 als Standard ausgewählt; wie aber kann ich jetzt wechseln, wenn ich will (Anwahl Standard und kde3 fährt immer kde3 hoch).
    Bei den Displaymanger-Einstellungen in der syconfig fiel mir auf, das die Section DISPLAYMANAGER_XSERVER="Xorg", wie ich das von anderen Rechnern kenne, offensichtlich fehlt: /etc/sysconfig/displaymanager liefert:
    Code:
    ## Path:	Desktop/Display manager
    ## Description:	settings to generate a proper displaymanager config
    
    ## Type:	string(kdm,kdm3,kdm4,xdm,gdm,wdm,console)
    ## Default:	""
    #
    # Here you can set the default Display manager (kdm/xdm/gdm/wdm/console).
    # all changes in this file require a restart of the displaymanager
    #
    DISPLAYMANAGER="kdm4"
    
    ## Type:	yesno
    ## Default:	no
    #
    # Allow remote access (XDMCP) to your display manager (xdm/kdm/gdm). Please note
    # that a modified kdm or xdm configuration, e.g. by KDE control center
    # will not be changed. For gdm, values will be updated after change.
    # XDMCP service should run only on trusted networks and you have to disable
    # firewall for interfaces, where you want to provide this service.
    #
    DISPLAYMANAGER_REMOTE_ACCESS="no"
    
    ## Type:	yesno
    ## Default:	no
    #
    # Allow remote access of the user root to your display manager. Note
    # that root can never login if DISPLAYMANAGER_SHUTDOWN is "auto" and
    # System/Security/Permissions/PERMISSION_SECURITY is "paranoid"
    #
    DISPLAYMANAGER_ROOT_LOGIN_REMOTE="no"
    
    ## Type:	yesno
    ## Default:	yes
    #
    # Let the displaymanager start a local Xserver.
    # Set to "no" for remote-access only.
    # Set to "no" on architectures without any Xserver (e.g. s390/s390x).
    #
    DISPLAYMANAGER_STARTS_XSERVER="yes"
    
    ## Type:        yesno
    ## Default:     no
    #
    # TCP port 6000 of Xserver. When set to "no" (default) Xserver is
    # started with "-nolisten tcp". Only set this to "yes" if you really
    # need to. Remote X service should run only on trusted networks and
    # you have to disable firewall for interfaces, where you want to
    # provide this service. Use ssh X11 port forwarding whenever possible.
    #
    DISPLAYMANAGER_XSERVER_TCP_PORT_6000_OPEN="no"
    
    ## Type:    string
    ## Default:
    #
    # Define the user whom should get logged in without request. If string
    # is empty, display standard login dialog.
    #
    DISPLAYMANAGER_AUTOLOGIN=""
    
    ## Type:        yesno
    ## Default:     no
    #
    # Allow all users to login without password, but ask for the user, if
    # DISPLAYMANAGER_AUTOLOGIN is empty.
    #
    DISPLAYMANAGER_PASSWORD_LESS_LOGIN="no"
    
    ## Type:        yesno
    ## Default:     no
    #
    # Display a combobox for Active Directory domains.
    #
    DISPLAYMANAGER_AD_INTEGRATION="no"
    
    ## Type:    list(root,all,none,auto)
    ## Default: auto
    #
    # Determine who will be able to shutdown or reboot the system in kdm
    # and gdm. Valid values are: "root" (only root can shutdown), "all"
    # (everybody can shutdown), "none" (nobody can shutdown from
    # displaymanager), "auto" (follow
    # System/Security/Permissions/PERMISSION_SECURITY to decide: "easy
    # local" is equal to "all", everything else is equal to "root"). Note
    # that remote user can never shutdown in GDM.
    #
    DISPLAYMANAGER_SHUTDOWN="auto"
    
    ## Type:        string
    ## Default:     ""
    #
    # Mode to configure on output devices by default
    # (RANDR 1.2 compatible drivers only).
    #
    # If set to "auto", DISPLAYMANAGER_RANDR_MODE_auto is used on laptops, and
    # the empty string on workstations.
    #
    # The output is not explicitly enabled (read: disabled) if set to an empty
    # string.
    # If the variable contains a fully configured modeline (see default of
    # DISPLAYMANAGER_RANDR_MODE_auto), the mode is defined and set.
    # If the variable contains a mode name only, the mode has to be defined
    # already.
    #
    # If a monitor is attached during Xstartup, or when invoking "xrandr --auto"
    # during runtime, the output is correctly configured and a mode is
    # automatically selected if none has been used so far.
    #
    # Variables are checked according to their extension for
    #    VGA DVI_I DVI_D DVI_A Composite S_Video Component LFP Proprietary
    #
    DISPLAYMANAGER_RANDR_MODE_VGA=""
    #DISPLAYMANAGER_RANDR_MODE_DVI_I=""
    #DISPLAYMANAGER_RANDR_MODE_DVI_D=""
    #DISPLAYMANAGER_RANDR_MODE_DVI_A=""
    #DISPLAYMANAGER_RANDR_MODE_Compsite=""
    #DISPLAYMANAGER_RANDR_MODE_S_Video=""
    #DISPLAYMANAGER_RANDR_MODE_Component=""
    #DISPLAYMANAGER_RANDR_MODE_LFP=""
    #DISPLAYMANAGER_RANDR_MODE_Proprietary=""
    
    ## Type:        string
    ## Default:     "1024x768_60 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync"
    #
    # Mode to use for laptops for DISPLAYMANAGER_RANDR_MODE_* on laptops only,
    # when the according variable is set to "auto".
    # (RANDR 1.2 compatible drivers only).
    #
    DISPLAYMANAGER_RANDR_MODE_auto="1024x768_60 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync"
    ## Path:	Desktop/Display manager
    ## Description: settings to generate a proper displaymanager config
    ## Config:      kdm3
    ## Type:    string
    ## Default: 
    #
    # space separated list of users for which icons should be shown in KDM
    # if empty, then take system defaults
    #
    KDM_USERS=""
    
    ## Type:    string
    ## Default: 
    #
    # Special greeting words in kdm
    #
    KDM_GREETSTRING=""
    
    ## Type:        string
    ## Default:     SUSE
    #
    # Define the theme to be used by kdm. If empty, the traditional login
    # window is used (which lacks some features)
    # 
    DISPLAYMANAGER_KDM_THEME="SUSE"
    2. Compiz lässt sich durch nichts in der Welt zum Laufen bringen. Ich habe schon einige How-Tos in Linuxforen durchgearbeitet, leider ohne Erfolg:
    http://www.linux-club.de/viewtopic.p...01820&p=621736
    http://www.linux-club.de/viewtopic.php?f=24&t=93724
    http://www.linux-club.de/viewtopic.php?f=24&t=103003
    http://de.opensuse.org/Propriet%C3%A..._mit_nvidia.29

    Ein Aufruf von Compiz auf der Kommandozeile bringt
    Code:
    ppp8:~> compiz
    compiz (core) - Error: Screen 0 on display ":0.0" already has a compositing manager; try using the --replace option to replace the current compositing manager.
    compiz (core) - Fatal: No manageable screens found on display
    Wenn ich das empfohlene replace mache, gibt es zwar keinen Fehler, aber es passiert genauso nichts. Hier meine Xorg
    Code:
    # /.../
    # SaX generated X11 config file
    # Created on: 2009-06-14T13:36:39+0200.
    #
    # Version: 8.1
    # Contact: Marcus Schaefer <sax@suse.de>, 2005
    # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
    #
    # Automatically generated by [ISaX] (8.1)
    # PLEASE DO NOT EDIT THIS FILE!
    #
    
    Section "Files"
      FontPath     "/usr/share/fonts/misc:unscaled"
      FontPath     "/usr/share/fonts/local"
      FontPath     "/usr/share/fonts/75dpi:unscaled"
      FontPath     "/usr/share/fonts/100dpi:unscaled"
      FontPath     "/usr/share/fonts/Type1"
      FontPath     "/usr/share/fonts/URW"
      FontPath     "/usr/share/fonts/Speedo"
      FontPath     "/usr/share/fonts/PEX"
      FontPath     "/usr/share/fonts/cyrillic"
      FontPath     "/usr/share/fonts/latin2/misc:unscaled"
      FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/Type1"
      FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
      FontPath     "/usr/share/fonts/baekmuk:unscaled"
      FontPath     "/usr/share/fonts/japanese:unscaled"
      FontPath     "/usr/share/fonts/kwintv"
      FontPath     "/usr/share/fonts/truetype"
      FontPath     "/usr/share/fonts/uni:unscaled"
      FontPath     "/usr/share/fonts/CID"
      FontPath     "/usr/share/fonts/ucs/misc:unscaled"
      FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
      FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/misc:unscaled"
      FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/Type1"
      FontPath     "/usr/share/fonts/misc/sgi:unscaled"
      FontPath     "/usr/share/fonts/xtest"
      FontPath     "/opt/kde3/share/fonts"
      InputDevices "/dev/gpmdata"
      InputDevices "/dev/input/mice"
    EndSection
    
    Section "ServerFlags"
      Option       "AllowMouseOpenFail" "on"
      Option       "ZapWarning" "on"
    EndSection
    
    Section "Module"
      Load         "glx"
      Load         "dbe"
      Load         "extmod"
      Load         "dri"
      Load         "freetype"
    EndSection
    
    Section "InputDevice"
      Driver       "kbd"
      Identifier   "Keyboard[0]"
      Option       "Protocol" "Standard"
      Option       "XkbLayout" "de"
      Option       "XkbModel" "microsoftpro"
      Option       "XkbRules" "xfree86"
      Option       "XkbVariant" "nodeadkeys"
    EndSection
    
    
    Section "InputDevice"
      Driver       "mouse"
      Identifier   "Mouse[1]"
      Option       "Buttons" "5"
      Option       "Device" "/dev/input/mice"
      Option       "Name" "Elan Microelectronics PS/2+USB Mouse"
      Option       "Protocol" "explorerps/2"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    
    Section "Monitor"
      Option       "CalcAlgorithm" "XServerPool"
      DisplaySize  305 230
      HorizSync    31-48
      Identifier   "Monitor[0]"
      ModelName    "1024X768@60HZ"
      Option       "DPMS"
      Option       "PreferredMode" "1280x1024"
      VendorName   "--> VESA"
      VertRefresh  50-60
      UseModes     "Modes[0]"
    EndSection
    
    
    Section "Modes"
      Identifier   "Modes[0]"
    EndSection
    
    
    Section "Screen"
      DefaultDepth 24
      SubSection "Display"
        Depth      15
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      16
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      24
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      8
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      Device       "Device[0]"
      Identifier   "Screen[0]"
      Monitor      "Monitor[0]"
    EndSection
    
    
    Section "Device"
      BoardName    "GeForce 9600 GT"
      Driver       "nvidia"
      Identifier   "Device[0]"
      Screen       0
      VendorName   "NVIDIA"
    EndSection
    
    
    
    Section "ServerLayout"
      Identifier   "Layout[all]"
      InputDevice  "Keyboard[0]" "CoreKeyboard"
      InputDevice  "Mouse[1]" "CorePointer"
      Option       "Clone" "off"
      Option       "Xinerama" "off"
      Screen       "Screen[0]"
    EndSection
    
    
    Section "DRI"
        Group      "video"
        Mode       0660
    EndSection
    
    Section "Extensions"
      Option       "Composite" "on"
    EndSection
    Wenn jemand eine Idee hat, wie das in den Griff zu bekommen ist (compiz starten, kdm mit den Optionen kde4 und gnome einrichten) bitte um Posting! Danke.

  2. #2
    Registrierter Benutzer
    Registriert seit
    Oct 2004
    Beiträge
    320
    Hallo Linuxgemeinde

    eines der Probleme konnte ich lösen, KDE4 wird in kdm jetzt angeboten. Lag daran, dass bei der Erstinstallation kdebase4-session nicht mitinstalliert wurde.

    Bleibt die Frage, warum compiz nicht will. Vielleicht noch jemand ne Idee??

  3. #3
    Registrierter Benutzer
    Registriert seit
    Oct 2006
    Ort
    Wuppertal
    Beiträge
    259
    Wozu brauchst Du eigentlich Compiz ? Die Bildschirmeffekte bietet KDE4 auch fast alle.
    Hast Du einen sonstigen speziellen Grund ?
    Schon mal die KDE4-3D-Effekte ausgeschaltet bevor Du Compiz probierst?


    Dietger

  4. #4
    Registrierter Benutzer
    Registriert seit
    Oct 2004
    Beiträge
    320
    Hallo

    Compiz weil ich derzeit noch überwiegend kde 3.5 benutze. Werde aber 3D in kde4 mal abschalten und schauen was passiert. Bin grad nicht am Rechner, aber berichte dann nochmals. Danke.

Ähnliche Themen

  1. Terratec Cinergy DVB-T 1400 PCI + opensuse 11.1
    Von carfal im Forum Fernsehen
    Antworten: 1
    Letzter Beitrag: 05.09.09, 17:13
  2. Änderungen im Ext3 Filesystem von openSuse 11.1?
    Von bachgauman im Forum System installieren und konfigurieren
    Antworten: 5
    Letzter Beitrag: 13.04.09, 00:42
  3. KDE Problem
    Von froZen eXe im Forum Anwendungen Allgemein, Software
    Antworten: 45
    Letzter Beitrag: 11.04.09, 12:30
  4. Ralink
    Von brokenspine187 im Forum Router und Netzaufbau
    Antworten: 22
    Letzter Beitrag: 26.03.08, 15:29

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •