Anzeige:
Ergebnis 1 bis 14 von 14

Thema: suse 11 update probleme

  1. #1
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44

    Unhappy suse 11 update probleme

    Hallo an alle !!
    habe folgendes prob habe einen update von 10.3 auf 11 gemacht, alles hat wunderbar funktioniert nur leider bleibt nach kurzer Zeit die Maus und Tastatur hängen (logitech easy call desktop/mouse usb wireless, unter win xp welches ich jetzt notgedrungen nutzen muss ist es ok ) d.h. kann nichts mehr einstellen. gibt es eine Möglichkeit ohne gui eine system startdatei auszulesen bzw. das system zu rep. oder könnte ggf eine ps2 mouse noch funktionieren ?
    würde mich über jede hilfe freuen !!

    Ja, ich weiß man sollte kein update machen sondern neu installieren.....
    hilft mir jetzt aber nicht da die platte sehr voll ist ....

  2. #2
    Registrierter Benutzer
    Registriert seit
    Dec 2003
    Ort
    Dettenhausen
    Beiträge
    22.054
    Über Strg-Alt-F[123456] solltest Du an eine Textkonsole gelangen...

    Je nach Konfiguration des X-Servers sollte aber auch eine PS2-Maus auf Anhieb funktionieren...
    Ich bin root - ich darf das.

  3. #3
    Registrierter Benutzer
    Registriert seit
    Jan 2008
    Beiträge
    2.551
    Code:
    dmesg | grep -i usb
    sudo tail -5000 /var/log/messages | grep -i usb

  4. #4
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44

    Danke !!!

    Wow das ging schnell danke für die hilfe werde ich gleich mal probieren und mich dann wieder melden

  5. #5
    kleiner Pinguin Avatar von Wene
    Registriert seit
    Jan 2004
    Ort
    Schweiz
    Beiträge
    1.488
    Sollte die Tastatur tatsächlich überhaupt nicht mehr reagieren wird auch ein CTRL+ALT+Fx nicht mehr helfen. In diesem Fall würde ich raten, das System direkt in Runlevel 3 zu starten. Dazu einfach in GRUB eine "3" als Bootparameter eintippen.
    Sudoku? Das ist doch dieses Kreuzworträtsel für Legastheniker oder?

  6. #6
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44
    zur Zeit habe ich eine PS2 tastatur+ Maus sowie die wireless maus u. Tastatur zusammen angeschlossen und das system ist seit 10 min scheinbar stabil mir sagen die reports leider nichts kann jemand mit diesen report etwas anfangen ?
    oder wäre eine Neuinstallation ratsam ?

    linux-mario:~ # dmesg | grep -i usb
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb1: SerialNumber: 0000:00:10.0
    ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
    usb usb2: SerialNumber: 0000:00:10.3
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb3: SerialNumber: 0000:00:10.1
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb4: SerialNumber: 0000:00:10.2
    hub 2-0:1.0: unable to enumerate USB device on port 2
    usb 1-2: new full speed USB device using uhci_hcd and address 2
    usb 1-2: configuration #1 chosen from 1 choice
    hub 1-2:1.0: USB hub found
    usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    usb 1-2: Product: General Purpose USB Hub
    usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    usb 1-2.1: configuration #1 chosen from 1 choice
    usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.1: Product: VoIP USB Dual RF Receiver
    usb 1-2.1: Manufacturer: Logitech
    usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    usb 1-2.2: configuration #1 chosen from 1 choice
    usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.2: Product: EasyCall Speakerphone
    usb 1-2.2: Manufacturer: Logitech
    usbcore: registered new interface driver hiddev
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    usbcore: registered new interface driver snd-usb-audio

    linux-mario:~ # sudo tail -5000 /var/log/messages | grep -i usb
    Aug 7 02:12:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 15:34:18 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
    Aug 7 15:34:18 linux-mario kernel: hub 1-2:1.0: USB hub found
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver hiddev
    Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    Aug 7 15:34:19 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    Aug 7 15:34:19 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver usbhid
    Aug 7 15:34:19 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
    Aug 7 15:35:13 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 22:45:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 23:03:22 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
    Aug 7 23:03:22 linux-mario kernel: hub 1-2:1.0: USB hub found
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver hiddev
    Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    Aug 7 23:03:25 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    Aug 7 23:03:25 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver usbhid
    Aug 7 23:03:25 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio

  7. #7
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44

    @ Wene

    danke für deine Hilfe runlevel 3 hat funktioniert nur leider konnte ich einen teil der reports nicht lesen weil die auflösung des TFTs per default zu groß war.Gab es da nicht auch ein befehl sodas man durch den report blättern kann ?

  8. #8
    Rain_maker
    Gast
    Jo, mehrere, hier bietet sich das an:

    http://bin-bash.de/komfort.php

    "Ausgabeumleitung" (Datei kann dann hier gepostet werden)

    //Edit:

    Zum Ansehen:

    http://bin-bash.de/kommando.php

    "Pager" (less oder more)
    Geändert von Rain_maker (07.08.08 um 23:25 Uhr)

  9. #9
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44
    Danke Rain maker, fällt dir etwas in meinen o.g. reports auf, was auf die Ursache meines probs schliessen lässt ?

  10. #10
    Rain_maker
    Gast
    Poste die vollständigen Ausgaben, dann macht das "sich Ansehen" auch mehr Sinn.

    Was man aber noch machen kann.

    Abstöpseln, wieder anstöpseln und dann nochmal die Befehle aufrufen und die dann neu hinzugekommenen Einträge posten.

  11. #11
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44
    das ist die ganze Ausgabe der Befehle : dmesg | grep -i usb und sudo tail -5000 /var/log/messages | grep -i usb


    linux-mario:~ # dmesg | grep -i usb

    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb1: SerialNumber: 0000:00:10.0
    ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
    usb usb2: SerialNumber: 0000:00:10.3
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb3: SerialNumber: 0000:00:10.1
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb4: SerialNumber: 0000:00:10.2
    hub 2-0:1.0: unable to enumerate USB device on port 2
    usb 1-2: new full speed USB device using uhci_hcd and address 2
    usb 1-2: configuration #1 chosen from 1 choice
    hub 1-2:1.0: USB hub found
    usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    usb 1-2: Product: General Purpose USB Hub
    usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    usb 1-2.1: configuration #1 chosen from 1 choice
    usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.1: Product: VoIP USB Dual RF Receiver
    usb 1-2.1: Manufacturer: Logitech
    usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    usb 1-2.2: configuration #1 chosen from 1 choice
    usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.2: Product: EasyCall Speakerphone
    usb 1-2.2: Manufacturer: Logitech
    usbcore: registered new interface driver hiddev
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/us b1/1-2/1-2.1/1-2.1:1.0/input/input6
    input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on us b-0000:00:10.0-2.1
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/us b1/1-2/1-2.1/1-2.1:1.1/input/input7
    input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    usbcore: registered new interface driver snd-usb-audio
    linux-mario:~ #



    linux-mario:~ # sudo tail -5000 /var/log/messages | grep -i usb

    Aug 7 02:12:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 15:34:18 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
    Aug 7 15:34:18 linux-mario kernel: hub 1-2:1.0: USB hub found
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver hiddev
    Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    Aug 7 15:34:19 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    Aug 7 15:34:19 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver usbhid
    Aug 7 15:34:19 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
    Aug 7 15:35:13 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 22:45:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 23:03:22 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
    Aug 7 23:03:22 linux-mario kernel: hub 1-2:1.0: USB hub found
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver hiddev
    Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    Aug 7 23:03:25 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    Aug 7 23:03:25 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver usbhid
    Aug 7 23:03:25 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
    linux-mario:~ #

  12. #12
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44
    jetzt die Ausgabe nach dem Ab- u. Anstöpseln:

    linux-mario:~ # dmesg | grep -i usb

    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb1: SerialNumber: 0000:00:10.0
    ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
    usb usb2: SerialNumber: 0000:00:10.3
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb3: SerialNumber: 0000:00:10.1
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
    usb usb4: SerialNumber: 0000:00:10.2
    hub 2-0:1.0: unable to enumerate USB device on port 2
    usb 1-2: new full speed USB device using uhci_hcd and address 2
    usb 1-2: configuration #1 chosen from 1 choice
    hub 1-2:1.0: USB hub found
    usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    usb 1-2: Product: General Purpose USB Hub
    usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    usb 1-2.1: configuration #1 chosen from 1 choice
    usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.1: Product: VoIP USB Dual RF Receiver
    usb 1-2.1: Manufacturer: Logitech
    usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    usb 1-2.2: configuration #1 chosen from 1 choice
    usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.2: Product: EasyCall Speakerphone
    usb 1-2.2: Manufacturer: Logitech
    usbcore: registered new interface driver hiddev
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    usbcore: registered new interface driver snd-usb-audio
    usb 1-2: USB disconnect, address 2
    usb 1-2.1: USB disconnect, address 3
    usb 1-2.2: USB disconnect, address 4
    usb 1-2: new full speed USB device using uhci_hcd and address 5
    usb 1-2: configuration #1 chosen from 1 choice
    hub 1-2:1.0: USB hub found
    usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    usb 1-2: Product: General Purpose USB Hub
    usb 1-2.1: new full speed USB device using uhci_hcd and address 6
    usb 1-2.1: configuration #1 chosen from 1 choice
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input8
    input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input9
    input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.1: Product: VoIP USB Dual RF Receiver
    usb 1-2.1: Manufacturer: Logitech
    usb 1-2.2: new full speed USB device using uhci_hcd and address 7
    usb 1-2.2: configuration #1 chosen from 1 choice
    usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.2: Product: EasyCall Speakerphone
    usb 1-2.2: Manufacturer: Logitech
    linux-mario:~ #



    linux-mario:~ # sudo tail -5000 /var/log/messages | grep -i usb

    Aug 7 02:12:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 15:34:18 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
    Aug 7 15:34:18 linux-mario kernel: hub 1-2:1.0: USB hub found
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    Aug 7 15:34:18 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
    Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
    Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver hiddev
    Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    Aug 7 15:34:19 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    Aug 7 15:34:19 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver usbhid
    Aug 7 15:34:19 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
    Aug 7 15:35:13 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 22:45:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
    Aug 7 23:03:22 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
    Aug 7 23:03:22 linux-mario kernel: hub 1-2:1.0: USB hub found
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    Aug 7 23:03:22 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
    Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver hiddev
    Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
    Aug 7 23:03:25 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
    Aug 7 23:03:25 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver usbhid
    Aug 7 23:03:25 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
    Aug 7 23:54:31 linux-mario kernel: usb 1-2: USB disconnect, address 2
    Aug 7 23:54:31 linux-mario kernel: usb 1-2.1: USB disconnect, address 3
    Aug 7 23:54:31 linux-mario kernel: usb 1-2.2: USB disconnect, address 4
    Aug 7 23:54:52 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 5
    Aug 7 23:54:52 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
    Aug 7 23:54:52 linux-mario kernel: hub 1-2:1.0: USB hub found
    Aug 7 23:54:52 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
    Aug 7 23:54:52 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    Aug 7 23:54:52 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
    Aug 7 23:54:52 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 6
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
    Aug 7 23:54:53 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input8
    Aug 7 23:54:53 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:54:53 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input9
    Aug 7 23:54:53 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 7
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
    Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
    linux-mario:~ #

  13. #13
    Registrierter Benutzer
    Registriert seit
    Dec 2001
    Ort
    Buchholz/Nordheide
    Beiträge
    44
    Merkwürdig ist auch das das System jetzt seit einer Std. ohne Probleme läuft, scheinbar weil ich die usb Maus zwar angeschlossen habe aber nicht benutze.

  14. #14
    Klugsch***er Avatar von Krischi
    Registriert seit
    Feb 2004
    Ort
    Wo's blitzt und kracht
    Beiträge
    2.021
    Das ganze in Code-Tags ([ Code]...[/ Code]) zu packen macht den Thread wesentlich übersichtlicher. Nicht nur aber auch gerade bei solch langen Ausgaben.
    Es wäre schön, wenn Du das noch nachholen könntest.

Ähnliche Themen

  1. sane:scanner probleme nach update auf suse 10.0
    Von tomcom im Forum stationäre Hardware
    Antworten: 1
    Letzter Beitrag: 30.12.05, 20:28
  2. Wer Linux sagt, muss auch SuSE sagen
    Von Freekazonid im Forum Meldungen und Mitglieder
    Antworten: 282
    Letzter Beitrag: 03.09.04, 23:12
  3. Suse 8.2 update probleme
    Von ghettopuzzi im Forum System installieren und konfigurieren
    Antworten: 1
    Letzter Beitrag: 19.08.03, 00:09
  4. Hat Suse Probleme bei der Anpassung der Kde 3.1 Pakete?
    Von pitfl im Forum Meldungen und Mitglieder
    Antworten: 7
    Letzter Beitrag: 14.02.03, 09:31
  5. frage zu SuSE 8.0 (Update des Systems)
    Von rk78 im Forum Anwendungen Allgemein, Software
    Antworten: 5
    Letzter Beitrag: 13.01.03, 21:06

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •