Anzeige:
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 15 von 28

Thema: Laptop wird heiss - Powermanagement?

  1. #1
    Linux-Fr34k Avatar von Toxic Wolf
    Registriert seit
    Feb 2007
    Ort
    Braunschweig
    Beiträge
    519

    Laptop wird heiss - Powermanagement?

    Fàilte,

    Ich habe festgestellt das mein Laptop unter Linux auf der rechten Seite sehr heiss wird (auch ist der Akku schnell leer). Da es unter Windows nicht der Fall ist, gehe ich davon aus das es an einer falschen oder fehlenden Konfiguration/Software liegt (evtl. am powermanagement?)

    Die HDD scheint es nicht zu sein, diese befindet sich auf der linken Seite, sofern es nicht Chaotisch verbaut wurde, und die Sachen nicht das sind wonach sie aussehen ;-)

    Nun kenne ich mich in diesem Bereich aber leider nicht aus, und weiss nicht wonach ich jetzt genau suchen soll. "Google.de/linux" spuckt zwar einige Seiten aus, doch finde ich dort nichts was mir jetzt wirklich weiterhilft. Nach den Ergebnissen laesst sich bisher nur vermuten, das es wahrscheinlich am Powermanagement liegt, doch dort verzweifel ist gerade, ich komme hier nicht mehr weiter, ich weiss nicht wonach ich suchen/schauen soll und bin wegen Arbeit und Hitze etwas gestresst.

    Der luefter laeuft trotz sehr hoher Temperatur normal, scheint sich an der Stelle also nicht fuer die Hitze zu "interessieren". Die CPU's habe ich mittels cpufreg auf Max. 800MHz runtergetaktet

    Es wird innerhalb von wenigen Minuten sehr heiss, also nicht erst nach laengerer Betriebszeit, oder bei groesserer Belastung durch Spiele, Videobearbeitungen oder der gleichen. Das einzige das laeuft ist "mrxvt" und "firefox" und mehr nicht. Also eigentlich nichts, was diese Hitze erklaeren koennte.

    $ cpufreq-info
    Code:
    cpufrequtils 004: cpufreq-info (C) Dominik Brodowski 2004-2006
    Report errors and bugs to cpufreq@lists.linux.org.uk, please.
    analyzing CPU 0:
      driver: acpi-cpufreq
      CPUs which need to switch frequency at the same time: 0 1
      hardware limits: 800 MHz - 2.20 GHz
      available frequency steps: 2.20 GHz, 2.20 GHz, 1.60 GHz, 1.20 GHz, 800 MHz
      available cpufreq governors: powersave, ondemand, performance
      current policy: frequency should be within 800 MHz and 1.20 GHz.
                      The governor "powersave" may decide which speed to use
                      within this range.
      current CPU frequency is 800 MHz.
    analyzing CPU 1:
      driver: acpi-cpufreq
      CPUs which need to switch frequency at the same time: 0 1
      hardware limits: 800 MHz - 2.20 GHz
      available frequency steps: 2.20 GHz, 2.20 GHz, 1.60 GHz, 1.20 GHz, 800 MHz
      available cpufreq governors: powersave, ondemand, performance
      current policy: frequency should be within 800 MHz and 1.20 GHz.
                      The governor "powersave" may decide which speed to use
                      within this range.
      current CPU frequency is 800 MHz.
    Nun weiss ich leider nicht, wo ich noch nach Informationen schauen soll bzw. welche benoetigt werden, tut mir leid. Waere nett wuerdet Ihr mir bescheid geben, was noch an Informationen benoetigt wird. Hier jedenfalls noch mal die Informationen zum Latoptop selber:

    Code:
    Model: ASUS X52SA-AS018C
    CPU: Intel Core 2 Duo 2x 2.2GHz
    RAM: 2GB
    Graka:  ATI Mobility Radeon HD2600
    
    OS: Arch-Linux i686
    WM: fvwm
    Noch mal die Ausgabe von "uname -a"
    Code:
    Linux notebook 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux
    MfG
    Tox!c Wolf

    Das Thema wird auch hier durchgekaut: http://forum.archlinux.de/?page=Post...20;thread=9343
    Geändert von Toxic Wolf (01.08.08 um 10:58 Uhr)
    OS: Arch-Linux WM: FVWM
    CPU: Athlon64 X2 +4800 Ram: 1GB Grafikkarte: MSI 8600GT (256mb) HDD: Seagate 500GB
    Mouse: Logitech MX1000 Keyboard Set: Logitech Cordless Desktop S510 Media Remote

  2. #2
    Registrierter Benutzer
    Registriert seit
    Jan 2008
    Beiträge
    2.551
    was sagt

    Code:
    sensors
    dmesg | grep -i acpi
    ?

    evtl. ist für ersteres ein

    Code:
    sensors-detect
    nötig.

  3. #3
    Linux-Fr34k Avatar von Toxic Wolf
    Registriert seit
    Feb 2007
    Ort
    Braunschweig
    Beiträge
    519
    $ sensors
    Code:
    coretemp-isa-0000
    Adapter: ISA adapter
    Core 0:      +56.0°C  (high = +100.0°C, crit = +100.0°C)
    
    coretemp-isa-0001
    Adapter: ISA adapter
    Core 1:      +57.0°C  (high = +100.0°C, crit = +100.0°C)
    Demnach sieht es wohl nicht soo heiss aus, oder schon zu viel bei einem Lapi?

    $ dmesg | grep -i acpi
    Code:
     BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
     BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
    ACPI: RSDP 000F8200, 0024 (r2 ACPIAM)
    ACPI: XSDT 7FFA0100, 007C (r1 _ASUS_ Notebook  9000707 MSFT       97)
    ACPI: FACP 7FFA0290, 00F4 (r3 A_M_I_ OEMFACP   9000707 MSFT       97)
    ACPI: DSDT 7FFA0680, B4D2 (r1  F3Sa0 F3Sa0204      204 INTL 20051117)
    ACPI: FACS 7FFAE000, 0040
    ACPI: APIC 7FFA0390, 005C (r1 A_M_I_ OEMAPIC   9000707 MSFT       97)
    ACPI: MCFG 7FFA0430, 003C (r1 A_M_I_ OEMMCFG   9000707 MSFT       97)
    ACPI: SLIC 7FFA0470, 0176 (r1 _ASUS_ Notebook  9000707 MSFT       97)
    ACPI: DBGP 7FFA03F0, 0034 (r1 A_M_I_ OEMDBGP   9000707 MSFT       97)
    ACPI: BOOT 7FFA05F0, 0028 (r1 A_M_I_ OEMBOOT   9000707 MSFT       97)
    ACPI: ECDT 7FFA0620, 0054 (r1 A_M_I_ OEMECDT   9000707 MSFT       97)
    ACPI: OEMB 7FFAE040, 0060 (r1 A_M_I_ AMI_OEM   9000707 MSFT       97)
    ACPI: HPET 7FFABB60, 0038 (r1 A_M_I_ OEMHPET   9000707 MSFT       97)
    ACPI: ATKG 7FFAE2A0, 8024 (r1 A_M_I_  OEMATKG  5000702 MSFT       97)
    ACPI: SSDT 7FFB6B80, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    ACPI: Core revision 20070126
    ACPI: Checking initramfs for custom DSDT
    ACPI: bus type pci registered
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: Error attaching device data
    ACPI: Error attaching device data
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in poll mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
    ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] -  F1, should be 59 [20070126]
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    ACPI: RTC can wake from S4
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI interrupt for device 0000:00:1f.1 disabled
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20
    ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
     sda: sda1 sda2 sda3 sda4 <<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    ACPI: SSDT 7FFB63A0, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
    ACPI: SSDT 7FFB66C0, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [P001] (supports 8 throttling states)
    ACPI: SSDT 7FFB62D0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
    ACPI: SSDT 7FFB6630, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [P002] (supports 8 throttling states)
    ACPI: AC Adapter [AC0] (on-line)
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: Lid Switch [LID]
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (44 C)
    ACPI: device:20 is registered as cooling_device2
    ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:09:01.1[B] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI interrupt for device 0000:03:00.0 disabled
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI interrupt for device 0000:03:00.0 disabled
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    OS: Arch-Linux WM: FVWM
    CPU: Athlon64 X2 +4800 Ram: 1GB Grafikkarte: MSI 8600GT (256mb) HDD: Seagate 500GB
    Mouse: Logitech MX1000 Keyboard Set: Logitech Cordless Desktop S510 Media Remote

  4. #4
    Registrierter Benutzer
    Registriert seit
    Jan 2008
    Beiträge
    2.551
    weiss nicht, ob das für arch passt, aber läuft der acpid?:

    Code:
    ps ax | grep acpid
    Was verwendest Du zum Power-Management unter fvwm? Ich erinnere mich an ein Laptop, dem ich mit fvwm als wm unter keinen Umständen den Batterie-Status entlocken konnte. Sicher war das Prob. eher im Kernel, aber - magic - mit gnome klappte alles.
    Geändert von Aqualung (31.07.08 um 10:41 Uhr)

  5. #5
    Linux-Fr34k Avatar von Toxic Wolf
    Registriert seit
    Feb 2007
    Ort
    Braunschweig
    Beiträge
    519
    Nein, laeuft nicht bzw. lief nicht. War nicht installiert. Habe es aber mal eben installiert und lies gerade darueber nach (wegen Configuration etc...)

    $ ps ax | grep acpid
    Code:
       14 ?        S<     0:00 [kacpid]
     4089 ?        Ss     0:00 acpid
     4091 pts/0    D+     0:00 grep acpid
    OS: Arch-Linux WM: FVWM
    CPU: Athlon64 X2 +4800 Ram: 1GB Grafikkarte: MSI 8600GT (256mb) HDD: Seagate 500GB
    Mouse: Logitech MX1000 Keyboard Set: Logitech Cordless Desktop S510 Media Remote

  6. #6
    Registrierter Benutzer
    Registriert seit
    Jan 2008
    Beiträge
    2.551
    Hast Du neu gebootet? Sieht hier (Suse 11) ein bisschen komplexer aus:

    Code:
    ps ax | grep acpid
       12 ?        S<     0:00 [kacpid]
     2010 ?        Ss     0:00 /sbin/acpid
     2228 ?        S      0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
     4673 ?        S      0:00 /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3
     6494 pts/7    S+     0:00 grep acpid

  7. #7
    Linux-Fr34k Avatar von Toxic Wolf
    Registriert seit
    Feb 2007
    Ort
    Braunschweig
    Beiträge
    519
    Nein, hatte ich nicht. Habe ich aber eben gemacht, die Ausgabe ist aber immer noch die selbe.

    Habe noch die Module "ac, fan, button" geladen und dann die jeweiligen Verzeichnise (/proc/acpid/<dir>) angeschaut. Dabei ist mir aufgefallen dass das Verzeichnis "fan" leer ist, im Gegensatz zu den anderen Verzeichnisen.

    Bedeutet dies, dass das Modul "fan" hier nicht funktioniert?

    $ cat /var/log/acpid.log
    Code:
    Jul 31 11:00:55 notebook syslog-ng[3086]: Log statistics; processed='center(queued)=5264', processed='center(received)=2428', processed='destination(acpid)=210', processed='destination(console)=0', processed='destination(debug)=0', processed='destination(mail)=0', processed='destination(user)=52', processed='destination(uucp)=0', processed='destination(messages)=763', processed='destination(ppp)=0', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=2041', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=1', processed='destination(authlog)=177', processed='destination(errors)=87', processed='destination(kernel)=1933', processed='destination(daemon)=0', processed='destination(console_all)=0', processed='source(src)=2428'
    Jul 31 11:02:01 notebook acpid: received event "button/power PWRF 00000080 00000001"
    Jul 31 11:02:01 notebook acpid: notifying client 3254[0:100]
    Jul 31 11:02:01 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000001"
    Jul 31 11:02:01 notebook acpid: action exited with status 0
    Jul 31 11:02:01 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000001"
    Jul 31 11:02:01 notebook acpid: action exited with status 0
    Jul 31 11:02:01 notebook acpid: completed event "button/power PWRF 00000080 00000001"
    Jul 31 11:02:22 notebook acpid: received event "button/power PWRF 00000080 00000002"
    Jul 31 11:02:22 notebook acpid: notifying client 3254[0:100]
    Jul 31 11:02:22 notebook acpid: client has disconnected
    Jul 31 11:02:22 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000002"
    Jul 31 11:02:22 notebook acpid: action exited with status 0
    Jul 31 11:02:22 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000002"
    Jul 31 11:02:22 notebook acpid: action exited with status 0
    Jul 31 11:02:22 notebook acpid: completed event "button/power PWRF 00000080 00000002"
    Jul 31 11:02:25 notebook acpid: received event "button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: completed event "button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: received event "button/power PWRF 00000080 00000004"
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000004"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000004"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: completed event "button/power PWRF 00000080 00000004"
    Jul 31 11:04:24 notebook acpid: starting up
    Jul 31 11:04:24 notebook acpid: 5 rules loaded
    Jul 31 11:05:15 notebook acpid: client connected from 3157[0:100]
    Jul 31 11:05:15 notebook acpid: 1 client rule loaded
    Jul 31 11:09:24 notebook sudo:     wolf : TTY=pts/0 ; PWD=/home/wolf ; USER=root ; COMMAND=/bin/cat /var/log/acpid.log
    Geändert von Toxic Wolf (31.07.08 um 11:11 Uhr)
    OS: Arch-Linux WM: FVWM
    CPU: Athlon64 X2 +4800 Ram: 1GB Grafikkarte: MSI 8600GT (256mb) HDD: Seagate 500GB
    Mouse: Logitech MX1000 Keyboard Set: Logitech Cordless Desktop S510 Media Remote

  8. #8
    Registrierter Benutzer
    Registriert seit
    Jan 2008
    Beiträge
    2.551
    Zitat Zitat von Toxic Wolf Beitrag anzeigen
    Nein, hatte ich nicht. Habe ich aber eben gemacht, die Ausgabe ist aber immer noch die selbe.

    Habe noch die Module "ac, fan, button" geladen und dann die jeweiligen Verzeichnise (/proc/acpid/<dir>) angeschaut. Dabei ist mir aufgefallen dass das Verzeichnis "fan" leer ist, im Gegensatz zu den anderen Verzeichnisen.
    Das sollte vom System geladen werden. Läuft bei Dir überhaupt der hald? Evtl. musst Du noch das Paket "powersave" nachinstallieren.

    Zitat Zitat von Toxic Wolf Beitrag anzeigen
    Bedeutet dies, dass das Modul "fan" hier nicht funktioniert?
    kann man so einfach nicht sagen. Versuche das powermanagement über das /etc/init.d/ bzw. runlevel-Skript anzwerfen.

    Zitat Zitat von Toxic Wolf Beitrag anzeigen
    $ cat /var/log/acpid.log
    Code:
    Jul 31 11:00:55 notebook syslog-ng[3086]: Log statistics; processed='center(queued)=5264', processed='center(received)=2428', processed='destination(acpid)=210', processed='destination(console)=0', processed='destination(debug)=0', processed='destination(mail)=0', processed='destination(user)=52', processed='destination(uucp)=0', processed='destination(messages)=763', processed='destination(ppp)=0', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=2041', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=1', processed='destination(authlog)=177', processed='destination(errors)=87', processed='destination(kernel)=1933', processed='destination(daemon)=0', processed='destination(console_all)=0', processed='source(src)=2428'
    Jul 31 11:02:01 notebook acpid: received event "button/power PWRF 00000080 00000001"
    Jul 31 11:02:01 notebook acpid: notifying client 3254[0:100]
    Jul 31 11:02:01 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000001"
    Jul 31 11:02:01 notebook acpid: action exited with status 0
    Jul 31 11:02:01 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000001"
    Jul 31 11:02:01 notebook acpid: action exited with status 0
    Jul 31 11:02:01 notebook acpid: completed event "button/power PWRF 00000080 00000001"
    Jul 31 11:02:22 notebook acpid: received event "button/power PWRF 00000080 00000002"
    Jul 31 11:02:22 notebook acpid: notifying client 3254[0:100]
    Jul 31 11:02:22 notebook acpid: client has disconnected
    Jul 31 11:02:22 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000002"
    Jul 31 11:02:22 notebook acpid: action exited with status 0
    Jul 31 11:02:22 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000002"
    Jul 31 11:02:22 notebook acpid: action exited with status 0
    Jul 31 11:02:22 notebook acpid: completed event "button/power PWRF 00000080 00000002"
    Jul 31 11:02:25 notebook acpid: received event "button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: completed event "button/power PWRF 00000080 00000003"
    Jul 31 11:02:25 notebook acpid: received event "button/power PWRF 00000080 00000004"
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000004"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: executing action "/etc/acpi/handler.sh button/power PWRF 00000080 00000004"
    Jul 31 11:02:25 notebook acpid: action exited with status 0
    Jul 31 11:02:25 notebook acpid: completed event "button/power PWRF 00000080 00000004"
    Jul 31 11:04:24 notebook acpid: starting up
    Jul 31 11:04:24 notebook acpid: 5 rules loaded
    Jul 31 11:05:15 notebook acpid: client connected from 3157[0:100]
    Jul 31 11:05:15 notebook acpid: 1 client rule loaded
    Jul 31 11:09:24 notebook sudo:     wolf : TTY=pts/0 ; PWD=/home/wolf ; USER=root ; COMMAND=/bin/cat /var/log/acpid.log
    kann ich Dir nichts dazu sagen.

  9. #9
    Linux-Fr34k Avatar von Toxic Wolf
    Registriert seit
    Feb 2007
    Ort
    Braunschweig
    Beiträge
    519
    Zitat Zitat von Aqualung Beitrag anzeigen
    Das sollte vom System geladen werden. Läuft bei Dir überhaupt der hald? Evtl. musst Du noch das Paket "powersave" nachinstallieren.
    Habe mich was die Module betrifft an http://wiki.archlinux.de/?title=ACPI_Module gehalten. Dort schreiben sie, das ich die Module in der rc.conf eintragen soll. Das meinte ich auch mit das ich die Module geladen habe.

    Nein, "hald" laeuft nicht. Werd ich aber mal aendern und auch mal drueber nachlesen (kenne "hal" noch nicht)

    "Powersave" gibt es hier nicht als Paket (also bei "pacman"), aber muesste das nicht eigentlich installiert sein? Ich nutze "cpufreq" mit dem governor "powersave". Oder ist das was anderes?

    kann man so einfach nicht sagen. Versuche das powermanagement über das /etc/init.d/ bzw. runlevel-Skript anzwerfen.
    ACPID wird ueber die "rc.conf" geladen.
    OS: Arch-Linux WM: FVWM
    CPU: Athlon64 X2 +4800 Ram: 1GB Grafikkarte: MSI 8600GT (256mb) HDD: Seagate 500GB
    Mouse: Logitech MX1000 Keyboard Set: Logitech Cordless Desktop S510 Media Remote

  10. #10
    Registrierter Benutzer
    Registriert seit
    Jan 2008
    Beiträge
    2.551
    Zitat Zitat von Toxic Wolf Beitrag anzeigen
    Habe mich was die Module betrifft an http://wiki.archlinux.de/?title=ACPI_Module gehalten. Dort schreiben sie, das ich die Module in der rc.conf eintragen soll. Das meinte ich auch mit das ich die Module geladen habe.

    Nein, "hald" laeuft nicht. Werd ich aber mal aendern und auch mal drueber nachlesen (kenne "hal" noch nicht)

    "Powersave" gibt es hier nicht als Paket (also bei "pacman"), aber muesste das nicht eigentlich installiert sein? Ich nutze "cpufreq" mit dem governor "powersave". Oder ist das was anderes?
    Ja. Das ist die CPU-Policy, die im Kernel definiert ist. Das Paket powersave ist hier ziemlich umfangreich:

    Code:
    rpm -ql powersave
    /etc/acpi
    /etc/acpi/events.ignore
    /etc/acpi/events.ignore/events.ignore
    /etc/dbus-1/system.d/powersave.conf
    /etc/init.d/powersaved
    /etc/powersave
    /usr/bin/powersave
    /usr/lib/powersave
    /usr/lib/powersave/do_screen_saver
    /usr/lib/powersave/do_x_notification
    /usr/lib/powersave/myecho
    /usr/lib/powersave/powersave-notify
    /usr/lib/powersave/rcpowersaved
    /usr/lib/powersave/scripts
    /usr/lib/powersave/scripts/beep_hilo
    /usr/lib/powersave/scripts/beep_lohi
    /usr/lib/powersave/scripts/debug_events
    [...]
    Schon gesehen?
    http://bbs.archlinux.org/viewtopic.php?id=28162

    Edit:
    bei arch scheint es kein modul namens powersave zu geben. Stattdessen Pm-utils und Cpufrequtils, die bei Dir wohl schon installiert sind.
    Obsolete:
    http://wiki.archlinux.org/index.php/Powersaved
    Aktuell:
    http://wiki.archlinux.org/index.php/Pm-utils
    http://wiki.archlinux.org/index.php/Cpufrequtils
    Geändert von Aqualung (31.07.08 um 13:39 Uhr)

  11. #11
    Rain_maker
    Gast

  12. #12
    Linux-Fr34k Avatar von Toxic Wolf
    Registriert seit
    Feb 2007
    Ort
    Braunschweig
    Beiträge
    519
    Zitat Zitat von Rain_maker Beitrag anzeigen
    Noe, das hatte ich noch nicht gesehen
    OS: Arch-Linux WM: FVWM
    CPU: Athlon64 X2 +4800 Ram: 1GB Grafikkarte: MSI 8600GT (256mb) HDD: Seagate 500GB
    Mouse: Logitech MX1000 Keyboard Set: Logitech Cordless Desktop S510 Media Remote

  13. #13
    Rain_maker
    Gast
    Mit knapp 500 Beiträgen sollte man eigentlich die Spielregeln kennen.

    Wenn man schon gleichzeitig mehrere Foren auf das selbe Problem ansetzt, dann sollte man zumindest die jeweiligen Helfer darüber informieren, damit die

    a) wissen, was im jeweils anderen Forum schon probiert wurde

    und

    b) es keine sich überschneidenden Lösungsvorschläge gibt

    Und zum "fair-play" gehörts auch.

  14. #14
    Linux-Fr34k Avatar von Toxic Wolf
    Registriert seit
    Feb 2007
    Ort
    Braunschweig
    Beiträge
    519
    Ach komm, nu mach hier mal keinen Herrmann deswegen und komm wieder runter...

    Ich gebe mein bestes doch bin ich imho sehr gestresst, steh unter Zeitdruck und bin stark genervt. Nebenbei habe ich hier noch eine Temperatur von 28-30°C im Zimmer (trotzt Kuehlung!) ...

    Da kann man schon mal das eine oder andere vergessen... auch hat man unter den Umstaenden auch wenig Nerv noch mal alles doppelt und dreifach zu Posten... (obwohl... bei Dir ist es sicherlich anders, Du bist Perfekt?)

    PS: Ach ja, muss man mit 500 Beitraegen die Reglen wirklich bereits kennen? Ich habe ja meist nur auf Beitraege geantwortet aber selten eigene Themen mit Fragen aufgemacht... also sagen die 500 Beitraege hier nichts

    500 Beitraege davon 14 eigene Themen welche aber nicht alle mit "Problemen" zu tun haben, und einige Fragen wurden nicht beantwortet oder musste/konnte ich selber loesen... also erklaere mir die Spielregen bitte noch einmal. Bei so wenigen Fragen zu Problemen, kenne ich diese noch nicht!
    Geändert von Toxic Wolf (31.07.08 um 20:33 Uhr)
    OS: Arch-Linux WM: FVWM
    CPU: Athlon64 X2 +4800 Ram: 1GB Grafikkarte: MSI 8600GT (256mb) HDD: Seagate 500GB
    Mouse: Logitech MX1000 Keyboard Set: Logitech Cordless Desktop S510 Media Remote

  15. #15
    Rain_maker
    Gast
    Zitat Zitat von Toxic Wolf Beitrag anzeigen
    Ach komm, nu mach hier mal keinen Herrmann deswegen und komm wieder runter...
    Ich war nie "oben".


    Zitat Zitat von Toxic Wolf Beitrag anzeigen
    auch hat man unter den Umstaenden auch wenig Nerv noch mal alles doppelt und dreifach zu Posten...
    Und warum hast Du es dann gemacht?

    Ein Link in jedem Forum auf den/die jeweils anderen Thread(s) reicht doch.

    Spielregeln:

    Wenn mehrfach posten, dann von Beginn an Querverweise setzen, fertig.

Ähnliche Themen

  1. ALDI Notebook MD 42200 - Linuxkompatiblität
    Von stefan-tiger im Forum Mobiles Linux, Notebook, PDA
    Antworten: 121
    Letzter Beitrag: 24.12.07, 06:44
  2. Ralink RT2573 unter Mandriva 2007.0
    Von baba_melone im Forum Mobiles Linux, Notebook, PDA
    Antworten: 16
    Letzter Beitrag: 02.04.07, 13:38
  3. D-Link DU-128TA+ mit mISDN/Capi
    Von KillerGurke im Forum Anbindung an die Aussenwelt
    Antworten: 0
    Letzter Beitrag: 19.11.06, 09:50
  4. Laptop wird zu heiss!
    Von Fallen Souls im Forum Mobiles Linux, Notebook, PDA
    Antworten: 1
    Letzter Beitrag: 01.12.04, 20:24
  5. laptop panasonic cf-41
    Von tonice im Forum stationäre Hardware
    Antworten: 0
    Letzter Beitrag: 26.02.03, 20:04

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •