Anzeige:
Ergebnis 1 bis 15 von 15

Thema: DVB-S mit kaffeine ruckelt

Baum-Darstellung

Vorheriger Beitrag Vorheriger Beitrag   Nächster Beitrag Nächster Beitrag
  1. #1
    Registrierter Benutzer Avatar von michel_vaclav
    Registriert seit
    Jan 2003
    Ort
    daheim
    Beiträge
    1.055

    DVB-S mit kaffeine ruckelt

    Hallo,

    nachdem mein alter Rechner den Geist aufgegeben hat, habe ich mir einen neuen geleistet und meine alte Skystar2-DVB-S-Karte wieder eingebaut. Hat auch bei den ersten beiden Installationen problemlos funktioniert. Allerdings bei der dritten Installation leider nicht mehr.

    Fehlerbild: Auf manchen Sendern (nicht alle!) stottert der Ton gleich von Beginn an, nach einigen Sekunden bilden sich Klötzchen, bis das Bild zeitweise komplett einfriert.

    Woran kann das liegen?

    Details:
    • openSUSE 10.2 64bit
    • kaffeine 0.8.6 von Packman
    • w32-codecs von Packman
    • libxine von Packman
    • libxine-dvb von Packman

    Was ich sonst noch probiert habe:
    • mit xine-ui und dem direkten Abspielen klappt es
    • mit mplayer klappt es
    • DVDs gehen ohne Probleme mit kaffeine
    • Karte auf anderen Steckplatz gesteckt
    • edit1: Sowohl kaffeine alsauch die w32-codecs aus den Quellen kompiliert


    Was könnte ich noch probieren?

    dmesg:
    Code:
    Linux version 2.6.22.18-0.2-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008-06-09 13:53:20 +0200
    Command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJDWQ346740-part6 vga=0x31a resume=/dev/sda5 splash=silent
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
     BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
     BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
     BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
    end_pfn_map = 1048576
    DMI 2.4 present.
    ACPI: RSDP 000FBCD0, 0014 (r0 ACPIAM)
    ACPI: RSDT 7FF80000, 003C (r1 A_M_I_ OEMRSDT  12000724 MSFT       97)
    ACPI: FACP 7FF80200, 0084 (r2 A_M_I_ OEMFACP  12000724 MSFT       97)
    ACPI: DSDT 7FF805C0, 90A1 (r1  A0751 A0751067       67 INTL 20060113)
    ACPI: FACS 7FF8E000, 0040
    ACPI: APIC 7FF80390, 006C (r1 A_M_I_ OEMAPIC  12000724 MSFT       97)
    ACPI: MCFG 7FF80400, 003C (r1 A_M_I_ OEMMCFG  12000724 MSFT       97)
    ACPI: OEMB 7FF8E040, 0081 (r1 A_M_I_ AMI_OEM  12000724 MSFT       97)
    ACPI: HPET 7FF89670, 0038 (r1 A_M_I_ OEMHPET  12000724 MSFT       97)
    ACPI: OSFR 7FF896B0, 00B0 (r1 A_M_I_ OEMOSFR  12000724 MSFT       97)
    No NUMA configuration found
    Faking a node at 0000000000000000-000000007ff80000
    Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
    Bootmem setup node 0 0000000000000000-000000007ff80000
    Zone PFN ranges:
      DMA             0 ->     4096
      DMA32        4096 ->  1048576
      Normal    1048576 ->  1048576
    early_node_map[2] active PFN ranges
        0:        0 ->      159
        0:      256 ->   524160
    On node 0 totalpages: 524063
      DMA zone: 56 pages used for memmap
      DMA zone: 1271 pages reserved
      DMA zone: 2672 pages, LIFO batch:0
      DMA32 zone: 7110 pages used for memmap
      DMA32 zone: 512954 pages, LIFO batch:31
      Normal zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Processor #2
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Processor #3
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0xffffffff base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
    swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
    SMP: Allowing 4 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 50296 bytes of per cpu data
    Built 1 zonelists.  Total pages: 515626
    Kernel command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJDWQ346740-part6 vga=0x31a resume=/dev/sda5 splash=silent
    bootsplash: silent mode.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    time.c: Detected 2400.084 MHz processor.
    Console: colour dummy device 80x25
    Checking aperture...
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2059460k/2096640k available (2054k kernel code, 36792k reserved, 1017k data, 316k init)
    Calibrating delay using timer specific routine.. 4803.42 BogoMIPS (lpj=9606843)
    Security Framework v1.0.0 initialized
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 0/0 -> Node 0
    using mwait in idle threads.
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    SMP alternatives: switching to UP code
    Unpacking initramfs... done
    Freeing initrd memory: 2705k freed
    ACPI: Core revision 20070126
    Parsing all Control Methods:
    Table [DSDT](id 0001) - 993 Objects with 75 Devices 278 Methods 35 Regions
     tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
    evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
    Using local APIC timer interrupts.
    result 16667236
    Detected 16.667 MHz APIC timer.
    SMP alternatives: switching to SMP code
    Booting processor 1/4 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4800.22 BogoMIPS (lpj=9600448)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 1/1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    SMP alternatives: switching to SMP code
    Booting processor 2/4 APIC 0x2
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 4800.24 BogoMIPS (lpj=9600491)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 2/2 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 2
    CPU2: Thermal monitoring enabled (TM2)
    Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
    checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    SMP alternatives: switching to SMP code
    Booting processor 3/4 APIC 0x3
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 4800.24 BogoMIPS (lpj=9600483)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 3/3 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 3
    CPU3: Thermal monitoring enabled (TM2)
    Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
    checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    Brought up 4 CPUs
    migration_cost=14,4017
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1
    evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
    evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 2 Runtime GPEs in this block
    ACPI: EC: Look up EC in DSDT
    Completing Region/Field/Buffer/Package initialization:......................................................................................................................................................................................................................
    Initialized 29/35 Regions 44/44 Fields 48/48 Buffers 93/95 Packages (1002 nodes)
    Initializing Device/Processor/Thermal objects by executing _INI methods:.
    Executed 1 _INI methods requiring 1 _STA executions (examined 81 objects)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    PCI-GART: No AMD northbridge found.
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    hpet0: 4 64-bit timers, 14318180 Hz
    ACPI: RTC can wake from S4
    pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
    pnp: 00:06: ioport range 0x290-0x297 has been reserved
    pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
    pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
    pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
    pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
    pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
    pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
    pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
    pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
    pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved
    pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
    pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
    PCI: Bridge: 0000:00:01.0
      IO window: c000-cfff
      MEM window: fa000000-fe8fffff
      PREFETCH window: d0000000-dfffffff
    PCI: Bridge: 0000:00:1c.0
      IO window: disabled.
      MEM window: disabled.
      PREFETCH window: f8f00000-f8ffffff
    PCI: Bridge: 0000:00:1c.4
      IO window: d000-dfff
      MEM window: fea00000-feafffff
      PREFETCH window: 88000000-880fffff
    PCI: Bridge: 0000:00:1c.5
      IO window: disabled.
      MEM window: fe900000-fe9fffff
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
      IO window: e000-efff
      MEM window: feb00000-febfffff
      PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    Time: tsc clocksource has been installed.
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    audit: initializing netlink socket (disabled)
    audit(1213900565.288:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.5:pcie00]
    Allocate Port Service[0000:00:1c.5:pcie02]
    vesafb: framebuffer at 0xfb000000, mapped to 0xffffc20000b00000, using 10240k, total 14336k
    vesafb: mode is 1280x1024x16, linelength=2560, pages=1
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...
    bootsplash: silentjpeg size 98233 bytes
    bootsplash: ...found (1280x1024, 35219 bytes, v3).
    Console: switching to colour frame buffer device 156x60
    fb0: VESA VGA frame buffer device
    Real Time Clock Driver v1.12ac
    hpet_resources: 0xfed00000 is busy
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.102 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 controller doesn't have AUX irq; using default 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input0
    input: PC Speaker as /class/input/input1
    NET: Registered protocol family 1
    Freeing unused kernel memory: 316k freed
    ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  B1, should be B0 [20070126]
    ACPI: SSDT 7FF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
    Parsing all Control Methods:
    Table [SSDT](id 00A9) - 9 Objects with 0 Devices 3 Methods 0 Regions
    ACPI: SSDT 7FF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
    Parsing all Control Methods:
    Table [SSDT](id 00AC) - 7 Objects with 0 Devices 4 Methods 0 Regions
    ACPI: SSDT 7FF8E400, 0143 (r1    AMI   CPU3PM        1 INTL 20060113)
    Parsing all Control Methods:
    Table [SSDT](id 00AF) - 7 Objects with 0 Devices 4 Methods 0 Regions
    ACPI: SSDT 7FF8E550, 0143 (r1    AMI   CPU4PM        1 INTL 20060113)
    Parsing all Control Methods:
    Table [SSDT](id 00B2) - 7 Objects with 0 Devices 4 Methods 0 Regions
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:03:00.0: version 3.0
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    scsi0 : ahci
    scsi1 : ahci
    ata1: SATA max UDMA/133 cmd 0xffffc20000ac4100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
    ata2: SATA max UDMA/133 cmd 0xffffc20000ac4180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    ata_piix 0000:00:1f.2: version 2.11
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0x000000000001a000 ctl 0x0000000000019c02 bmdma 0x0000000000019480 irq 22
    ata4: SATA max UDMA/133 cmd 0x0000000000019880 ctl 0x0000000000019802 bmdma 0x0000000000019488 irq 22
    ata3.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
    ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/133
    ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
    ata4.00: configured for UDMA/100
    ata4: EH pending after completion, repeating EH (cnt=4)
    scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD502IJ  1AA0 PQ: 0 ANSI: 5
    scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS10  EL00 PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    scsi4 : ata_piix
    scsi5 : ata_piix
    ata5: SATA max UDMA/133 cmd 0x000000000001b000 ctl 0x000000000001ac02 bmdma 0x000000000001a480 irq 22
    ata6: SATA max UDMA/133 cmd 0x000000000001a880 ctl 0x000000000001a802 bmdma 0x000000000001a488 irq 22
    PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
    ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.1 to 64
    scsi6 : pata_jmicron
    scsi7 : pata_jmicron
    ata7: PATA max UDMA/100 cmd 0x000000000001dc00 ctl 0x000000000001d882 bmdma 0x000000000001d400 irq 17
    ata8: PATA max UDMA/100 cmd 0x000000000001d800 ctl 0x000000000001d482 bmdma 0x000000000001d408 irq 17
    ata7.00: HPA unlocked: 66055248 -> 488397168, native 488397168
    ata7.00: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100
    ata7.00: 488397168 sectors, multi 0: LBA48
    ata7.00: configured for UDMA/100
    scsi 6:0:0:0: Direct-Access     ATA      SAMSUNG SP2514N  VF10 PQ: 0 ANSI: 5
    DC390: clustering now enabled by default. If you get problems load
            with "disable_clustering=1" and report to maintainers
    BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda: sda1 sda2 < sda5 sda6<6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
     sda7 >
    usb usb1: new device found, idVendor=0000, idProduct=0000
    sd 2:0:0:0: [sda] Attached SCSI disk
    sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sdb:
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    sd 6:0:0:0: [sdb] Attached SCSI disk
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.22.18-0.2-default uhci_hcd
    usb usb1: SerialNumber: 0000:00:1a.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.22.18-0.2-default uhci_hcd
    usb usb2: SerialNumber: 0000:00:1a.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.2 to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.22.18-0.2-default uhci_hcd
    usb usb3: SerialNumber: 0000:00:1a.2
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    usb 1-2: new low speed USB device using uhci_hcd and address 2
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
    usb usb4: new device found, idVendor=0000, idProduct=0000
    usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.22.18-0.2-default uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.0
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 1-2: new device found, idVendor=046d, idProduct=c045
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB-PS/2 Optical Mouse
    usb 1-2: Manufacturer: Logitech
    usb 1-2: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
    usb usb5: new device found, idVendor=0000, idProduct=0000
    usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.22.18-0.2-default uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.1
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    usb 3-2: new full speed USB device using uhci_hcd and address 2
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
    usb usb6: new device found, idVendor=0000, idProduct=0000
    usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb6: Product: UHCI Host Controller
    usb usb6: Manufacturer: Linux 2.6.22.18-0.2-default uhci_hcd
    usb usb6: SerialNumber: 0000:00:1d.2
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
    usb 3-2: new device found, idVendor=046d, idProduct=0928
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb7: new device found, idVendor=0000, idProduct=0000
    usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb7: Product: EHCI Host Controller
    usb usb7: Manufacturer: Linux 2.6.22.18-0.2-default ehci_hcd
    usb usb7: SerialNumber: 0000:00:1a.7
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 6 ports detected
    usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 3-2: Product: Camera
    usb 3-2: configuration #1 chosen from 1 choice
    usb 3-2: can't set config #1, error -71
    usb 1-2: USB disconnect, address 2
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb8: new device found, idVendor=0000, idProduct=0000
    usb usb8: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb8: Product: EHCI Host Controller
    usb usb8: Manufacturer: Linux 2.6.22.18-0.2-default ehci_hcd
    usb usb8: SerialNumber: 0000:00:1d.7
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 6 ports detected
    usb 3-2: USB disconnect, address 2
    usbcore: registered new interface driver hiddev
    usb 3-2: new full speed USB device using uhci_hcd and address 3
    usb 3-2: new device found, idVendor=046d, idProduct=0928
    usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 3-2: Product: Camera
    usb 3-2: Manufacturer:
    usb 3-2: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Attempting manual resume
    usb 1-2: new low speed USB device using uhci_hcd and address 3
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 1-2: new device found, idVendor=046d, idProduct=c045
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB-PS/2 Optical Mouse
    usb 1-2: Manufacturer: Logitech
    usb 1-2: configuration #1 chosen from 1 choice
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2
    sd 2:0:0:0: Attached scsi generic sg0 type 0
    scsi 3:0:0:0: Attached scsi generic sg1 type 5
    sd 6:0:0:0: Attached scsi generic sg2 type 0
    Linux video capture interface: v2.00
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc_cmos: probe of 00:03 failed with error -16
    /usr/src/packages/BUILD/spca5xx-20060501/obj/default/drivers/usb/spca5xx.c: USB SPCA5XX camera found.Logitech QuickCam Express II(SPCA561A)
    /usr/src/packages/BUILD/spca5xx-20060501/obj/default/drivers/usb/spca5xx.c: [spca5xx_probe:5479] Camera type S561
    /usr/src/packages/BUILD/spca5xx-20060501/obj/default/drivers/usb/spca5xx.c: [spca5xx_getcapability:1764] maxw 352 maxh 288 minw 160 minh 120
    usbcore: registered new interface driver spca5xx
    /usr/src/packages/BUILD/spca5xx-20060501/obj/default/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input4
    ACPI: Power Button (CM) [PWRB]
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    atl1 0000:02:00.0: version 2.0.7
    flexcop-pci: will use the HW PID filter.
    flexcop-pci: card revision 1
    ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
    DVB: registering new adapter (FlexCop Digital TV device).
    b2c2-flexcop: MAC address = 00:d0:d7:01:5f:58
    b2c2-flexcop: found the stv0299 at i2c address: 0x68
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopII' complete
    ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 16 (level, low) -> IRQ 16
    nvidia: module license 'NVIDIA' taints kernel.
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[febef800-febeffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
    ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.05  Mon May 19 00:03:22 PDT 2008
    usbcore: registered new interface driver gspca
    /usr/src/packages/BUILD/gspcav1-20070110/obj/default/gspca_core.c: gspca driver 01.00.12 registered
    Adding 10487196k swap on /dev/sda5.  Priority:-1 extents:1 across:10487196k
    device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c000112cba6]
    loop: module loaded
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sda7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    AppArmor: AppArmor initialized
    audit(1213900577.792:2):  type=1505 info="AppArmor initialized" pid=2275
    coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
    coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
    coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong!
    coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong!
    atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
    ip_tables: (C) 2000-2006 Netfilter Core Team
    audit(1213893397.256:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
    audit(1213893397.312:4): audit_pid=3717 old=0 by auid=4294967295
    Danke für jeden Hinweis

    michel_vaclav
    Geändert von michel_vaclav (19.06.08 um 20:44 Uhr) Grund: Tippfehler beseitigt

Ähnliche Themen

  1. DVB und Kaffeine
    Von MoDuL im Forum Fernsehen
    Antworten: 12
    Letzter Beitrag: 16.03.07, 22:14
  2. DVB-T und Videolan
    Von clumsy im Forum Fernsehen
    Antworten: 5
    Letzter Beitrag: 31.05.06, 18:40
  3. Antworten: 2
    Letzter Beitrag: 24.11.05, 11:43
  4. xine stürzt nach videostart mit SIGSEGV ab
    Von -=eagle=- im Forum Anwendungen Allgemein, Software
    Antworten: 2
    Letzter Beitrag: 07.06.05, 19:41
  5. Mandrake 10.0 und Kaffeine ?
    Von tost im Forum Musik
    Antworten: 6
    Letzter Beitrag: 23.08.04, 13:06

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •