Code:
th0: Media Link On 100mbps full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
eth0: no IPv6 routers present
bootsplash: status on console 0 changed to on
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: no IPv6 routers present
usb 3-3: new high speed USB device using ehci_hcd and address 4
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
usb 3-3: reset high speed USB device using ehci_hcd and address 4
usb 3-3: Could not load firmware file zd1211/zd1211b_ub. Error number -2
zd1211rw 3-3:1.0: couldn't load firmware. Error number -2
usb 3-3: reset high speed USB device using ehci_hcd and address 4
zd1211rw: probe of 3-3:1.0 failed with error -2
usbcore: registered new interface driver zd1211rw
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
usb 3-3: USB disconnect, address 4
eth0: no IPv6 routers present
usb 3-3: new high speed USB device using ehci_hcd and address 5
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 5
usb 3-3: Could not load firmware file zd1211/zd1211b_ub. Error number -2
zd1211rw 3-3:1.0: couldn't load firmware. Error number -2
usb 3-3: reset high speed USB device using ehci_hcd and address 5
zd1211rw: probe of 3-3:1.0 failed with error -2
eth0: no IPv6 routers present
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
usb 3-3: USB disconnect, address 5
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
eth0: Media Link On 100mbps full-duplex
usb 3-3: new high speed USB device using ehci_hcd and address 6
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 6
usb 3-3: Could not load firmware file zd1211/zd1211b_ub. Error number -2
zd1211rw 3-3:1.0: couldn't load firmware. Error number -2
usb 3-3: reset high speed USB device using ehci_hcd and address 6
zd1211rw: probe of 3-3:1.0 failed with error -2
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
_____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
ZD1211B - version 2.22.0.0-development
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
usbcore: registered new interface driver zd1211b
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
_____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
zd1211 - version 2.22.0.0-development
usbcore: registered new interface driver zd1211
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
usb 3-3: USB disconnect, address 6
usb 3-3: new high speed USB device using ehci_hcd and address 7
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 7
usb 3-3: Could not load firmware file zd1211/zd1211b_ub. Error number -2
zd1211rw 3-3:1.0: couldn't load firmware. Error number -2
usb 3-3: reset high speed USB device using ehci_hcd and address 7
zd1211rw: probe of 3-3:1.0 failed with error -2
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
eth0: no IPv6 routers present
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
RadioOn
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Set to CCK
Set to OFDM
wlan0: no IPv6 routers present
keybuf data [0]:
Just Update WEP key
eth0: Media Link On 100mbps full-duplex
keybuf data [0]:
Just Update WEP key
eth0: Media Link On 100mbps full-duplex
RadioOn
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Set to CCK
Set to OFDM
eth0: no IPv6 routers present
wlan0: no IPv6 routers present
RadioOn
******We Lose AP for 5 seconds
zd1205_notify_disjoin_event
RadioOn
keybuf data [0]:
Just Update WEP key
eth0: Media Link On 100mbps full-duplex
keybuf data [0]:
Just Update WEP key
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
usb 3-3: USB disconnect, address 7
usb 3-3: new high speed USB device using ehci_hcd and address 8
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 8
usb 3-3: Could not load firmware file zd1211/zd1211b_ub. Error number -2
zd1211rw 3-3:1.0: couldn't load firmware. Error number -2
usb 3-3: reset high speed USB device using ehci_hcd and address 8
zd1211rw: probe of 3-3:1.0 failed with error -2
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
RadioOn
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Set to CCK
Set to OFDM
wlan0: no IPv6 routers present
******We Lose AP for 5 seconds
zd1205_notify_disjoin_event
Wrong @ zd1211_rx_comp_cb, status=-71(3286277).
nonzero read bulk status received: -EPROTO
usb 3-3: USB disconnect, address 8
ehci_hcd 0000:00:08.2: qh cd1bb380 (#82) state 4(has tds)
Error is xxx
zd1211: failed rx_urb
The following is only an harmless informational message.
Unless you get a _continuous_flood_ of these messages it means
everything is working fine. Allocations from irqs cannot be
perfectly reliable and the kernel is designed to handle that.
firefox-bin: page allocation failure. order:1, mode:0x20
[<c0158462>] __alloc_pages+0x2c5/0x2d6
[<c016de36>] cache_alloc_refill+0x2ae/0x4c1
[<c016e0c0>] __kmalloc+0x77/0x8f
[<c026c270>] __alloc_skb+0x4b/0x108
[<c029a35c>] tcp_collapse+0x15a/0x34a
[<c029a536>] tcp_collapse+0x334/0x34a
[<c029a6a6>] tcp_prune_queue+0x15a/0x228
[<c029a927>] tcp_data_queue+0x1b3/0xa76
[<c011e038>] __wake_up+0x32/0x43
[<c026d83d>] __skb_checksum_complete_head+0x18/0x58
[<c029c928>] tcp_rcv_established+0x72a/0x7de
[<c02c0d2c>] unix_stream_recvmsg+0x39f/0x49a
[<c02a1868>] tcp_v4_do_rcv+0x2b/0x32e
[<c02a3bc2>] tcp_v4_rcv+0x84c/0x8aa
[<c028a8f9>] ip_local_deliver_finish+0x0/0x1b3
[<c028b1b4>] ip_local_deliver+0x189/0x231
[<c028a8f9>] ip_local_deliver_finish+0x0/0x1b3
[<c028aff2>] ip_rcv+0x485/0x4be
[<ceed0ebe>] packet_rcv_spkt+0x141/0x154 [af_packet]
[<c027025f>] netif_receive_skb+0x2ef/0x309
[<cf0e1df2>] sis900_interrupt+0x27d/0x60d [sis900]
[<c0271ebd>] process_backlog+0x93/0x109
[<c02720a8>] net_rx_action+0xa7/0x1b3
[<c012930c>] __do_softirq+0x75/0xe1
[<c01293bd>] do_softirq+0x45/0x53
[<c0129621>] irq_exit+0x38/0x6b
[<c0107486>] do_IRQ+0x7e/0x90
[<c0105e73>] common_interrupt+0x23/0x30
=======================
Mem-info:
DMA per-cpu:
CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: Hot: hi: 90, btch: 15 usd: 73 Cold: hi: 30, btch: 7 usd: 25
Active:26553 inactive:17794 dirty:2394 writeback:0 unstable:0
free:832 slab:8227 mapped:6011 pagetables:479 bounce:0
DMA free:876kB min:136kB low:168kB high:204kB active:5616kB inactive:3072kB present:16256kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 206 206
Normal free:2452kB min:1764kB low:2204kB high:2644kB active:100596kB inactive:68104kB present:211268kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 73*4kB 1*8kB 0*16kB 0*32kB 1*64kB 0*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 876kB
Normal: 531*4kB 1*8kB 0*16kB 0*32kB 1*64kB 0*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2452kB
Swap cache: add 500917, delete 483828, find 294083/376481, race 0+1
Free swap = 1918880kB
Total swap = 2104472kB
Free swap: 1918880kB
57328 pages of RAM
0 pages of HIGHMEM
1419 reserved pages
40334 pages shared
17089 pages swap cached
2394 pages dirty
0 pages writeback
6011 pages mapped
8227 pages slab
479 pages pagetables
The following is only an harmless informational message.
Unless you get a _continuous_flood_ of these messages it means
everything is working fine. Allocations from irqs cannot be
perfectly reliable and the kernel is designed to handle that.
firefox-bin: page allocation failure. order:1, mode:0x20
[<c0158462>] __alloc_pages+0x2c5/0x2d6
[<c016de36>] cache_alloc_refill+0x2ae/0x4c1
[<c016e0c0>] __kmalloc+0x77/0x8f
[<c026c270>] __alloc_skb+0x4b/0x108
[<c029a35c>] tcp_collapse+0x15a/0x34a
[<c029a536>] tcp_collapse+0x334/0x34a
[<c029a6a6>] tcp_prune_queue+0x15a/0x228
[<c029a927>] tcp_data_queue+0x1b3/0xa76
[<c011e038>] __wake_up+0x32/0x43
[<c026d83d>] __skb_checksum_complete_head+0x18/0x58
[<c029c928>] tcp_rcv_established+0x72a/0x7de
[<c02c0d2c>] unix_stream_recvmsg+0x39f/0x49a
[<c02a1868>] tcp_v4_do_rcv+0x2b/0x32e
[<c02a3bc2>] tcp_v4_rcv+0x84c/0x8aa
[<c028a8f9>] ip_local_deliver_finish+0x0/0x1b3
[<c028b1b4>] ip_local_deliver+0x189/0x231
[<c028a8f9>] ip_local_deliver_finish+0x0/0x1b3
[<c028aff2>] ip_rcv+0x485/0x4be
[<ceed0ebe>] packet_rcv_spkt+0x141/0x154 [af_packet]
[<c027025f>] netif_receive_skb+0x2ef/0x309
[<cf0e1df2>] sis900_interrupt+0x27d/0x60d [sis900]
[<c0271ebd>] process_backlog+0x93/0x109
[<c02720a8>] net_rx_action+0xa7/0x1b3
[<c012930c>] __do_softirq+0x75/0xe1
[<c01293bd>] do_softirq+0x45/0x53
[<c0129621>] irq_exit+0x38/0x6b
[<c0107486>] do_IRQ+0x7e/0x90
[<c0105e73>] common_interrupt+0x23/0x30
=======================
Mem-info:
DMA per-cpu:
CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: Hot: hi: 90, btch: 15 usd: 79 Cold: hi: 30, btch: 7 usd: 23
Active:26630 inactive:16176 dirty:2404 writeback:0 unstable:0
free:2212 slab:8404 mapped:6016 pagetables:472 bounce:0
DMA free:1024kB min:136kB low:168kB high:204kB active:5616kB inactive:2304kB present:16256kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 206 206
Normal free:7824kB min:1764kB low:2204kB high:2644kB active:100904kB inactive:62400kB present:211268kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 252*4kB 0*8kB 1*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1024kB
Normal: 1876*4kB 0*8kB 0*16kB 0*32kB 1*64kB 0*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 7824kB
Swap cache: add 500982, delete 483828, find 294129/376537, race 0+1
Free swap = 1918880kB
Total swap = 2104472kB
Free swap: 1918880kB
57328 pages of RAM
0 pages of HIGHMEM
1419 reserved pages
38356 pages shared
17154 pages swap cached
2404 pages dirty
0 pages writeback
6016 pages mapped
8404 pages slab
472 pages pagetables
The following is only an harmless informational message.
Unless you get a _continuous_flood_ of these messages it means
everything is working fine. Allocations from irqs cannot be
perfectly reliable and the kernel is designed to handle that.
Xorg: page allocation failure. order:1, mode:0x20
[<c0158462>] __alloc_pages+0x2c5/0x2d6
[<c016de36>] cache_alloc_refill+0x2ae/0x4c1
[<c016e0c0>] __kmalloc+0x77/0x8f
[<c026c270>] __alloc_skb+0x4b/0x108
[<c029a35c>] tcp_collapse+0x15a/0x34a
[<c029a536>] tcp_collapse+0x334/0x34a
[<c029a6a6>] tcp_prune_queue+0x15a/0x228
[<c029adb7>] tcp_data_queue+0x643/0xa76
[<c011fccc>] default_wake_function+0x0/0xc
[<c026d83d>] __skb_checksum_complete_head+0x18/0x58
[<c029c928>] tcp_rcv_established+0x72a/0x7de
[<c011fccc>] default_wake_function+0x0/0xc
[<ceefd48b>] ipt_do_table+0x2bf/0x2e8 [ip_tables]
[<c0288131>] ip_route_input+0x38/0xcae
[<c011fccc>] default_wake_function+0x0/0xc
[<c02a1868>] tcp_v4_do_rcv+0x2b/0x32e
[<c02a3bc2>] tcp_v4_rcv+0x84c/0x8aa
[<c028a8f9>] ip_local_deliver_finish+0x0/0x1b3
[<c028b1b4>] ip_local_deliver+0x189/0x231
[<c028a8f9>] ip_local_deliver_finish+0x0/0x1b3
[<c028aff2>] ip_rcv+0x485/0x4be
[<ceed0ebe>] packet_rcv_spkt+0x141/0x154 [af_packet]
[<c027025f>] netif_receive_skb+0x2ef/0x309
[<cf0e1df2>] sis900_interrupt+0x27d/0x60d [sis900]
[<c0271ebd>] process_backlog+0x93/0x109
[<c02720a8>] net_rx_action+0xa7/0x1b3
[<c012930c>] __do_softirq+0x75/0xe1
[<c01293bd>] do_softirq+0x45/0x53
[<c0129621>] irq_exit+0x38/0x6b
[<c0107486>] do_IRQ+0x7e/0x90
[<c0105e73>] common_interrupt+0x23/0x30
=======================
Mem-info:
DMA per-cpu:
CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: Hot: hi: 90, btch: 15 usd: 57 Cold: hi: 30, btch: 7 usd: 20
Active:28107 inactive:17630 dirty:12388 writeback:2728 unstable:0
free:384 slab:7295 mapped:7209 pagetables:472 bounce:0
DMA free:880kB min:136kB low:168kB high:204kB active:6316kB inactive:3012kB present:16256kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 206 206
Normal free:656kB min:1764kB low:2204kB high:2644kB active:106112kB inactive:67508kB present:211268kB pages_scanned:12131 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 18*4kB 1*8kB 0*16kB 3*32kB 1*64kB 1*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 880kB
Normal: 0*4kB 0*8kB 1*16kB 0*32kB 0*64kB 1*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 656kB
Swap cache: add 504056, delete 486781, find 345621/428776, race 0+1
Free swap = 1920504kB
Total swap = 2104472kB
Free swap: 1920504kB
57328 pages of RAM
0 pages of HIGHMEM
1419 reserved pages
41098 pages shared
17275 pages swap cached
12388 pages dirty
2728 pages writeback
7209 pages mapped
7295 pages slab
472 pages pagetables
usb 3-3: new high speed USB device using ehci_hcd and address 9
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 9
zd1211rw 3-3:1.0: RF UW2453_RF 0x9 is not supported
usb 3-3: reset high speed USB device using ehci_hcd and address 9
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
st: Version 20070203, fixed bufsize 32768, s/g segs 256
pnp: Device 00:08 disabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
pnp: Device 00:08 activated.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
pnp: Device 00:08 disabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
ppa: Version 2.07 (for Linux 2.4.x)
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
usb 3-3: USB disconnect, address 9
usb 3-3: new high speed USB device using ehci_hcd and address 10
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 10
zd1211rw 3-3:1.0: RF UW2453_RF 0x9 is not supported
usb 3-3: reset high speed USB device using ehci_hcd and address 10
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
spurious 8259A interrupt: IRQ7.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
pnp: Device 00:08 activated.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
pnp: Device 00:08 disabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
ppa: Version 2.07 (for Linux 2.4.x)
usb 3-3: USB disconnect, address 10
usb 3-1: new high speed USB device using ehci_hcd and address 11
usb 3-1: new device found, idVendor=0ace, idProduct=1215
usb 3-1: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-1: Product: USB2.0 WLAN
usb 3-1: Manufacturer: ZyDAS
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset high speed USB device using ehci_hcd and address 11
zd1211rw 3-1:1.0: RF UW2453_RF 0x9 is not supported
usb 3-1: reset high speed USB device using ehci_hcd and address 11
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
usb 3-1: USB disconnect, address 11
usb 3-3: new high speed USB device using ehci_hcd and address 12
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 12
zd1211rw 3-3:1.0: RF UW2453_RF 0x9 is not supported
usb 3-3: reset high speed USB device using ehci_hcd and address 12
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
usb 3-3: USB disconnect, address 12
usb 3-1: new high speed USB device using ehci_hcd and address 13
usb 3-1: new device found, idVendor=0ace, idProduct=1215
usb 3-1: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-1: Product: USB2.0 WLAN
usb 3-1: Manufacturer: ZyDAS
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset high speed USB device using ehci_hcd and address 13
zd1211rw 3-1:1.0: RF UW2453_RF 0x9 is not supported
usb 3-1: reset high speed USB device using ehci_hcd and address 13
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
eth0: no IPv6 routers present
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
usb 3-1: USB disconnect, address 13
usb 3-3: new high speed USB device using ehci_hcd and address 14
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 14
zd1211rw 3-3:1.0: RF UW2453_RF 0x9 is not supported
usb 3-3: reset high speed USB device using ehci_hcd and address 14
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
usb 3-3: USB disconnect, address 14
usb 3-1: new high speed USB device using ehci_hcd and address 15
usb 3-1: new device found, idVendor=0ace, idProduct=1215
usb 3-1: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-1: Product: USB2.0 WLAN
usb 3-1: Manufacturer: ZyDAS
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset high speed USB device using ehci_hcd and address 15
zd1211rw 3-1:1.0: RF UW2453_RF 0x9 is not supported
usb 3-1: reset high speed USB device using ehci_hcd and address 15
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
pnp: Device 00:08 activated.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
pnp: Device 00:08 disabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
ppa: Version 2.07 (for Linux 2.4.x)
usb 3-1: USB disconnect, address 15
usb 3-3: new high speed USB device using ehci_hcd and address 16
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 16
zd1211rw 3-3:1.0: RF UW2453_RF 0x9 is not supported
usb 3-3: reset high speed USB device using ehci_hcd and address 16
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
usb 3-3: USB disconnect, address 16
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
pnp: Device 00:08 activated.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
pnp: Device 00:08 disabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
ppa: Version 2.07 (for Linux 2.4.x)
usb 3-3: new high speed USB device using ehci_hcd and address 17
usb 3-3: new device found, idVendor=0ace, idProduct=1215
usb 3-3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 3-3: Product: USB2.0 WLAN
usb 3-3: Manufacturer: ZyDAS
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: reset high speed USB device using ehci_hcd and address 17
zd1211rw 3-3:1.0: RF UW2453_RF 0x9 is not supported
usb 3-3: reset high speed USB device using ehci_hcd and address 17
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
UW2453 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
eth1 renamed to wlan0
udev: renamed network interface eth1 to wlan0
Lesezeichen