Hallo zusammen und frohes neues Jahr !
Auf der /dev/sda ist mein opensuse 10.3 installiert und hier ist auch mein Grub drauf. Auf den beiden anderen Platten ist JEWEILS eine bootfähiges Windows drauf. Grub soll Windows von der sdc also hd2 starten.
Kann es sein, daß der Grub auf einer Windowspartition sein muss und nicht auf der Linuxpartition ?
Muss ich Grub dann auf eine Windows Partition installieren? Wenn ja , wie geht das genau ?
Der Befehl fdiks -l liefert folgendes:
Code:
Platte /dev/sda: 60.0 GByte, 60040544256 Byte
255 heads, 63 sectors/track, 7299 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x9a0f7366
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 1 199 1598436 82 Linux Swap / Solaris
/dev/sda2 * 200 2810 20972857+ 83 Linux
/dev/sda3 2811 7299 36057892+ 83 Linux
Platte /dev/sdb: 203.9 GByte, 203928109056 Byte
255 heads, 63 sectors/track, 24792 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x48e9a63e
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 * 1 24792 199141708+ 7 HPFS/NTFS
Platte /dev/sdc: 250.0 GByte, 250059350016 Byte
255 heads, 63 sectors/track, 30401 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6e0c03ef
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdc1 2 30401 244188000 5 Erweiterte
/dev/sdc2 * 7182 20300 105378367+ 7 HPFS/NTFS
/dev/sdc5 2 7181 57673318+ 7 HPFS/NTFS
/dev/sdc6 20301 30401 81136220 7 HPFS/NTFS]
Der Befehl cat /etc/fstab:
Code:
/dev/disk/by-id/scsi-SATA_MAXTOR_4K060H3_373120024062-part2 / ext3 acl,user_xattr 1 1
/dev/disk/by-id/scsi-SATA_MAXTOR_4K060H3_373120024062-part3 /home ext3 acl,user_xattr 1 2
/dev/disk/by-id/scsi-SATA_Maxtor_6V200E0_V402M2LG-part1 /windows/C ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_MAXTOR_4K060H3_373120024062-part1 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
in der grub.menu.list steht:
Code:
# Modified by YaST2. Last modification on Di Jan 1 14:45:09 CET 2008
default 0
timeout 8
gfxmenu (hd0,1)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.13-0.3
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.13-0.3-default root=/dev/disk/by-id/scsi-SATA_MAXTOR_4K060H3_373120024062-part2 vga=0x31a resume=/dev/sda1 splash=silent showopts
initrd /boot/initrd-2.6.22.13-0.3-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.13-0.3
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.13-0.3-default root=/dev/disk/by-id/scsi-SATA_MAXTOR_4K060H3_373120024062-part2 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.13-0.3-default
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: Linux other 1###
title Linux other 1
rootnoverify (hd0,1)
chainloader (hd2,0)+1
###Don't change this comment - YaST2 identifier: Original name: Linux other 2###
title Linux other 2
rootnoverify (hd0,1)
chainloader (hd2,1)+1
###Don't change this comment - YaST2 identifier: Original name: Linux other 3###
title Linux other 3
rootnoverify (hd0,1)
chainloader (hd2,4)+1
###Don't change this comment - YaST2 identifier: Original name: Linux other 4###
title Linux other 4
rootnoverify (hd0,1)
chainloader (hd2,5)+1
in der device.map
Code:
(hd0) /dev/sda
(hd1) /dev/sdb
(hd2) /dev/sdc
Lesezeichen