Code:
<6>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
<6>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
<6>pnp: 00:01: ioport range 0x860-0x8ff has been reserved
<6>pnp: 00:09: ioport range 0x100-0x1fe has been reserved
<6>pnp: 00:09: ioport range 0x200-0x277 has been reserved
<6>pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
<6>pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
<6>pnp: 00:09: ioport range 0x300-0x377 has been reserved
<6>pnp: 00:09: ioport range 0x380-0x3bb has been reserved
<6>pnp: 00:09: ioport range 0x3c0-0x3e7 has been reserved
<6>pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: d000-dfff
<6> MEM window: dfe00000-dfffffff
<6> PREFETCH window: d0000000-d7ffffff
<6>PCI: Bridge: 0000:00:1c.0
<6> IO window: disabled.
<6> MEM window: dfd00000-dfdfffff
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.1
<6> IO window: disabled.
<6> MEM window: dfc00000-dfcfffff
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: c000-cfff
<6> MEM window: dfa00000-dfbfffff
<6> PREFETCH window: d8000000-dbffffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>Simple Boot Flag at 0x7a set to 0x1
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: disabled - APM is not SMP safe.
<6>audit: initializing netlink socket (disabled)
<5>audit(1184661893.408:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:01.0:pcie00]
<7>Allocate Port Service[0000:00:01.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>Allocate Port Service[0000:00:1c.0:pcie02]
<7>Allocate Port Service[0000:00:1c.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<7>Allocate Port Service[0000:00:1c.1:pcie02]
<7>Allocate Port Service[0000:00:1c.1:pcie03]
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 16384k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=9
<6>vesafb: protected mode interface info at c000:5890
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3).
<4>Console: switching to colour frame buffer device 124x44
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<7>hpet_resources: 0xfed00000 is busy
<6>PNP: No PS/2 controller found. Probing ports directly.
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<4>ACPI wakeup devices:
<4>VBTN PCI0 PCI1 PCI2 PCI3 PCI4 USB0 USB1 USB2 USB3
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>Freeing unused kernel memory: 192k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<6>ICH6: IDE controller at PCI slot 0000:00:1f.1
<6>ICH6: chipset revision 3
<6>ICH6: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
<7>Probing IDE interface ide0...
<4>hda: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive
<4>hdb: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>libata version 1.20 loaded.
<7>ata_piix 0000:00:1f.2: version 1.05
<7>ata_pci_init_one: pci_dev class+intf: 0x1018f
<7>ata_pci_init_one: NO_LEGACY == 0
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>ata1: PATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 193
<6>ata2: PATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 193
<7>ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000
<6>ata1: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48
<7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x00000000
<7>ata1: dev 1 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000
<6>ata1: dev 1 ATA-7, max UDMA/133, 586072368 sectors: LBA48
<7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x00000000
<6>ata1: dev 0 configured for UDMA/133
<6>ata1: dev 1 configured for UDMA/133
<7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x00000000
<6>scsi0 : ata_piix
<3>ata2: disabling port
<6>scsi1 : ata_piix
<5> Vendor: ATA Model: ST3300831AS Rev: 3.06
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
<5>sd 0:0:0:0: Attached scsi disk sda
<5> Vendor: ATA Model: ST3300831AS Rev: 3.01
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: 00 3a 00 00
<5>SCSI device sdb: drive cache: write back
<5>SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: 00 3a 00 00
<5>SCSI device sdb: drive cache: write back
<6> sdb: sdb1 < sdb5 sdb6 sdb7 > sdb2
<5>sd 0:0:1:0: Attached scsi disk sdb
<5>sd 0:0:1:0: Attached scsi generic sg1 type 0
<4>Attempting manual resume
<5>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sda6: checking transaction log (sda6)
<5>ReiserFS: sda6: Using r5 hash to sort names
<6>parport: PnPBIOS parport detected.
<6>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
<6>lp0: using parport0 (interrupt-driven).
<6>hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Model 1007 Rev 00000000 Serial 10071102
<6>b44.c:v1.00 (Apr 7, 2006)
<6>eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:2c:4b:84
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>USB Universal Host Controller Interface driver v2.3
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000ff80
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.16.27-0.9-bigsmp uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>Linux video capture interface: v1.00
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000ff60
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.16.27-0.9-bigsmp uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
<6>i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
<4>ivtv: module not supported by Novell, setting U taint flag.
<6>ivtv: ==================== START INIT IVTV ====================
<6>ivtv: version 0.6.3 (tagged release) loading
<6>ivtv: Linux version: 2.6.16.27-0.9-bigsmp SMP 586 REGPARM gcc-4.1
<6>ivtv: In case of problems please include the debug info between
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000ff40
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.16.27-0.9-bigsmp uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.2
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ivtv: the START INIT IVTV and END INIT IVTV lines, along with
<6>ivtv: any module options, when mailing the ivtv-users mailinglist.
<6>usb 1-1: new low speed USB device using uhci_hcd and address 2
<7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.3: irq 217, io base 0x0000ff20
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.16.27-0.9-bigsmp uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.3
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>Linux agpgart interface v0.101 (c) Dave Jones
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
<6>ehci_hcd 0000:00:1d.7: irq 201, io mem 0xffa80800
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb5: new device found, idVendor=0000, idProduct=0000
<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: EHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.16.27-0.9-bigsmp ehci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.7
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 8 ports detected
<6>ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
<6>hw_random hardware driver 1.0.0 loaded
<6>tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8235082
<6>tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
<6>tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
<6>tveeprom 0-0050: audio processor is MSP4418 (idx 25)
<6>tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
<6>tveeprom 0-0050: has radio, has IR remote
<3>usb 1-1: device not accepting address 2, error -71
<6>tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
<6>tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
<6>saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
<6>usb 5-4: new high speed USB device using ehci_hcd and address 4
<6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
<7>dm-netlink version 0.0.2 loaded
<6>usb 5-4: new device found, idVendor=055d, idProduct=3021
<6>saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
<6>usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 5-4: Product: FMD9410NDL1
<6>usb 5-4: Manufacturer: Samsung
<6>usb 5-4: SerialNumber: 00A11F48C371DE48963B
<6>usb 5-4: configuration #1 chosen from 1 choice
<6>msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
<6>msp3400 0-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect
<6>Initializing USB Mass Storage driver...
<6>usb 1-1: new low speed USB device using uhci_hcd and address 4
<6>usb 1-1: new device found, idVendor=413c, idProduct=2003
<6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-1: Product: Dell USB Keyboard
<6>usb 1-1: Manufacturer: Dell
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>usb 1-2: new low speed USB device using uhci_hcd and address 5
<6>usb 1-2: new device found, idVendor=046d, idProduct=c016
<6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-2: Product: Optical USB Mouse
<6>usb 1-2: Manufacturer: Logitech
<6>usb 1-2: configuration #1 chosen from 1 choice
<6>scsi2 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 4
<7>usb-storage: waiting for device to settle before scanning
<6>usbcore: registered new driver usb-storage
<6>usbcore: registered new driver hiddev
<6>USB Mass Storage support registered.
<6>input: Dell Dell USB Keyboard as /class/input/input1
<6>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1
<6>input: Logitech Optical USB Mouse as /class/input/input2
<6>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>usb 1-1: USB disconnect, address 4
<6>ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
<6>ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
<6>usb 1-1: new low speed USB device using uhci_hcd and address 6
<6>ivtv0: Encoder revision: 0x02050032
<6>ivtv0: Decoder revision: 0x02020023
<6>ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
<6>ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
<6>ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
<6>ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
<6>ivtv0: Create encoder radio stream
<6>usb 1-1: new device found, idVendor=413c, idProduct=2003
<6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-1: Product: Dell USB Keyboard
<6>usb 1-1: Manufacturer: Dell
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>input: Dell Dell USB Keyboard as /class/input/input3
<6>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1
<6>usb 1-1: USB disconnect, address 6
<6>ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
<6>ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
<6>ivtv0: Create decoder VOUT stream
<6>ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
<6>ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
<6>tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
<6>ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
<6>ivtv: ==================== END INIT IVTV ====================
<6>agpgart: Detected an Intel 915G Chipset.
<6>agpgart: AGP aperture is 256M @ 0x0
<6>usb 1-1: new low speed USB device using uhci_hcd and address 7
<6>usb 1-1: new device found, idVendor=413c, idProduct=2003
<6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-1: Product: Dell USB Keyboard
<6>usb 1-1: Manufacturer: Dell
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>input: Dell Dell USB Keyboard as /class/input/input4
<6>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1
<6>usb 1-1: USB disconnect, address 7
<6>usb 1-1: new low speed USB device using uhci_hcd and address 8
<6>usb 1-1: new device found, idVendor=413c, idProduct=2003
<6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-1: Product: Dell USB Keyboard
<6>usb 1-1: Manufacturer: Dell
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>input: Dell Dell USB Keyboard as /class/input/input5
<6>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1
<6>usb 1-1: USB disconnect, address 8
<6>usb 1-1: new low speed USB device using uhci_hcd and address 9
<6>usb 1-1: new device found, idVendor=413c, idProduct=2003
<6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-1: Product: Dell USB Keyboard
<6>usb 1-1: Manufacturer: Dell
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>input: Dell Dell USB Keyboard as /class/input/input6
<6>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1
<5> Vendor: Samsung Model: CF Card CF Rev: 1.6E
<5> Type: Direct-Access ANSI SCSI revision: 00
<5>sd 2:0:0:0: Attached scsi removable disk sdc
<5>sd 2:0:0:0: Attached scsi generic sg2 type 0
<5> Vendor: Samsung Model: MS Card MS Rev: 1.6E
<5> Type: Direct-Access ANSI SCSI revision: 00
<5>sd 2:0:0:1: Attached scsi removable disk sdd
<5>sd 2:0:0:1: Attached scsi generic sg3 type 0
<5> Vendor: Samsung Model: SD Card MMC/SD Rev: 1.6E
<5> Type: Direct-Access ANSI SCSI revision: 00
<5>sd 2:0:0:2: Attached scsi removable disk sde
<5>sd 2:0:0:2: Attached scsi generic sg4 type 0
<5> Vendor: Samsung Model: SM/XD Card SM Rev: 1.6E
<5> Type: Direct-Access ANSI SCSI revision: 00
<5>sd 2:0:0:3: Attached scsi removable disk sdf
<5>sd 2:0:0:3: Attached scsi generic sg5 type 0
<7>usb-storage: device scan complete
<6>loop: loaded (max 8 devices)
<5>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda7: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sda7: checking transaction log (sda7)
<5>ReiserFS: sda7: Using r5 hash to sort names
<5>ReiserFS: sdb7: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sdb7: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: sdb7: journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sdb7: checking transaction log (sdb7)
<5>ReiserFS: sdb7: Using r5 hash to sort names
<5>ReiserFS: sdb6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sdb6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: sdb6: journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sdb6: checking transaction log (sdb6)
<5>ReiserFS: sdb6: Using r5 hash to sort names
<5>ReiserFS: sdb5: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sdb5: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: sdb5: journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sdb5: checking transaction log (sdb5)
<5>ReiserFS: sdb5: Using r5 hash to sort names
<5>ReiserFS: sda9: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda9: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: sda9: checking transaction log (sda9)
<5>ReiserFS: sda9: Using r5 hash to sort names
<6>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
<5>audit(1184662251.474:2): AppArmor (version 2.0-19.43r6320) initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console (deleted)) at Tue Jul 17 08:45:02 2007
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
donedone
Starting udevd udevd-event[1593]: run_program: exec of program '/usr/sbin/alsactl' failed
done
Loading required kernel modules
doneActivating device mapper...
done
Starting MD Raid done
Checking file systems...
fsck 1.38 (30-Jun-2005)
Reiserfs super block in block 16 on 0x807 of format 3.6 with standard journal
Blocks (total/free): 3419824/3113079 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda7' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x817 of format 3.6 with standard journal
Blocks (total/free): 2437840/1993011 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sdb7' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x816 of format 3.6 with standard journal
Blocks (total/free): 12209392/10803804 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sdb6' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x815 of format 3.6 with standard journal
Blocks (total/free): 14651264/7203278 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sdb5' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x809 of format 3.6 with standard journal
Blocks (total/free): 42744928/39144488 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda9' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
/dev/sda3: 160 files, 283950/2016194 clusters
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda7 on /home type reiserfs (rw)
/dev/sdb7 on /opt type reiserfs (rw,acl,user_xattr)
/dev/sdb6 on /usr type reiserfs (rw,acl,user_xattr)
/dev/sda3 on /mnt/local/tausch type vfat (rw,umask=0000,uid=1000,gid=100)
/dev/sdb5 on /mnt/local/data type reiserfs (rw,acl,user_xattr)
/dev/sda9 on /mnt/local/allerlei type reiserfs (rw,acl,user_xattr)
doneRetry device configurationdone
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
Setting up the hardware clockdone
Setting up hostname 'SoltauSuse1'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>killproc: kill(875,29)
Creating /var/log/boot.msg
doneStarting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
Disabling IPv6 forwardingdone
Disabling IPv6 privacydone
done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
Boot logging started on /dev/tty1(/dev/console) at Tue Jul 17 08:45:59 2007
Master Resource Control: previous runlevel: N, switching to runlevel: 5
done<notice>killproc: kill(875,3)
INIT: Entering runlevel: 5
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
TERM=linux/shLoading AppArmor profiles - AppArmor already loaded with profiles. Not loading profiles. warning
done
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting D-BUS daemondone
Starting resource managerdone
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/acpid ]
[acpid]: starting up
[acpid]: 0 rules loaded
acpid: loading ACPI modules ( ac battery button ) done
Starting acpid done
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 acpi=noirq HOME=/ SHLVL=2 SPLASH=yes splash=verbose ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 acpi=noirq HOME=/ SHLVL=2 SPLASH=yes splash=verbose ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting HAL daemondone
<notice>startproc: execve (/usr/sbin/lircd) [ /usr/sbin/lircd -H dev/input -d /dev/input/ir ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/lircd ]
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneStarting lircd .(/dev/input/ir)done
Starting hpiod: [ OK ]
Starting hpssd: [ OK ]
Note: You may have to restart the cupsd.
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Broadcom Corporation BCM4401 100Base-T (rev 01)
eth0 configuration: eth-id-00:12:3f:2c:4b:84
eth0 (DHCP) . . . . . <notice>pidofproc: dhcpcd 3565
<notice>killproc: kill(3144,20)
<notice>killproc: kill(3141,1)
<notice>killproc: kill(3144,18)
<notice>killproc: kill(3144,12)
IP/Netmask: 192.168.2.100 / 255.255.255.0
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting mdnsddone
Starting RPC portmap daemondone
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
Importing Net File System (NFS)mount server reported tcp not available, falling back to udp
mount: RPC: Remote system error - No route to host
mount server reported tcp not available, falling back to udp
mount: RPC: Remote system error - No route to host
done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Checking/updating CPU microcode done
Starting ZENworks Management Daemondone
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/usr/bin:/sbin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg LANG=de_DE.UTF-8 PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting powersaved: done
Starting service kdmdone
Starting INET services. (xinetd)done
Starting atieventsddone
Starting service MySQL done
<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
Try to get initial date and time via NTP from de.pool.ntp.orgdone
Starting network time protocol daemon (NTPD)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/bin/mythbackend) [ /usr/bin/mythbackend --daemon --logfile /var/log/mythtv/mythbackend.log ], [ HOME=/root CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/bin/mythbackend ]
Starting MythTV backenddone
Starting X Font Server<notice>startproc: execve (/usr/X11R6/bin/xfs) [ /usr/X11R6/bin/xfs -nodaemon -user nobody -port 7100 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=noirq LINES=44 SHLVL=2 HOME=/ splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/X11R6/bin/xfs ]
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 5 has been reached
<notice>killproc: kill(2948,3)
Und das Ergebnis von "cat boot.msg | grep usb": im nächsten Posting....
Lesezeichen