Anzeige:
Ergebnis 1 bis 3 von 3

Thema: Usb-Geraete Konflikt (Tastatur / externe HDD)

  1. #1
    Registrierter Benutzer
    Registriert seit
    Feb 2007
    Beiträge
    5

    Usb-Geraete Konflikt (Tastatur / externe HDD)

    Guten Morgen,

    ich habe ein Problem mit meiner externen Festplatte. Sobald ich diese am Rechner anschliesse kann!! es sein, das die Tastatur oder Maus (oder beides) ausfaellt. Dabei handelt es sich um Usb-Geraete. Das seltsame ist dass der Fehler nicht reproduzierbar ist, d.h. manchmal faellt Tastatur/Maus aus, manchmal aber auch nicht (beim Anstecken der HDD). Ausserdem kann es auch spaeter passieren, also nicht direkt nach dem Anstecken sondern irgendwann im laufenden Betrieb.

    Benutze openSUSE 10.2.

    Vllt. ist ja noch die Ausgabe von dmesg hilfreich (gekuerzt):

    Code:
    Linux version 2.6.18.8-0.1-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Fri Mar 2 13:51:59 UTC 2007
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
     BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
     BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
     BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
     BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    ...
    ...
    USB module v0.3.35 initialized, probing for devices...
    sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 3
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 4
    usb 1-1: device not accepting address 4, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 5
    usb 1-1: device not accepting address 5, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 6
    usb 1-2: new device found, idVendor=047b, idProduct=0002
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB Keyboard and Mouse
    usb 1-2: Manufacturer: SILITEK
    usb 1-2: configuration #1 chosen from 1 choice
    usbcore: registered new driver acx_usb
    ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
    ohci_hcd 0000:00:03.1: OHCI Host Controller
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.1: irq 185, io mem 0xcfffe000
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb2: SerialNumber: 0000:00:03.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
    ehci_hcd 0000:00:03.2: EHCI Host Controller
    ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
    PCI: cache line size of 64 is not supported by device 0000:00:03.2
    ehci_hcd 0000:00:03.2: irq 193, io mem 0xcffff000
    ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: EHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.18.8-0.1-default ehci_hcd
    usb usb3: SerialNumber: 0000:00:03.2
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xdc00, speed 1217kHz
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 201
    0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
    0000:00:04.0: Using transceiver found at address 1 as default
    eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 201, 00:0b:6a:24:6f:59.
    ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 209
    usb 1-2: USB disconnect, address 6
    Linux agpgart interface v0.101 (c) Dave Jones
    nvidia: module license 'NVIDIA' taints kernel.
    usbcore: registered new driver hiddev
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
    NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9631  Thu Nov  9 17:38:10 PST 2006
    usb 1-1: new full speed USB device using ohci_hcd and address 7
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 8
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 9
    usb 1-1: device not accepting address 9, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 10
    usb 1-1: device not accepting address 10, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 11
    usb 1-2: new device found, idVendor=047b, idProduct=0002
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB Keyboard and Mouse
    usb 1-2: Manufacturer: SILITEK
    usb 1-2: configuration #1 chosen from 1 choice
    ohci_hcd 0000:00:03.1: wakeup
    input: SILITEK USB Keyboard and Mouse as /class/input/input1
    input: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    input: SILITEK USB Keyboard and Mouse as /class/input/input2
    input: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    usb 2-2: new low speed USB device using ohci_hcd and address 2
    Adding 1558264k swap on /dev/hda5.  Priority:-1 extents:1 across:1558264k
    usb 2-2: new device found, idVendor=046d, idProduct=c03d
    usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: USB-PS/2 Optical Mouse
    usb 2-2: Manufacturer: Logitech
    usb 2-2: configuration #1 chosen from 1 choice
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2
    ndiswrapper version 1.25 loaded (preempt=no,smp=yes)
    ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
    PCI: Enabling device 0000:00:0a.0 (0100 -> 0102)
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
    ndiswrapper: using IRQ 177
    wlan0: vendor: 'TNET1130'
    wlan0: ethernet device 00:13:46:b0:a6:3f using NDIS driver gplus, 104C:9066.5.conf
    wlan0: encryption modes supported: WEP; TKIP with WPA
    usbcore: registered new driver ndiswrapper
    wlan0 renamed to wlanxx0
    ndiswrapper: changing interface name from 'wlan0' to 'wlanxx0'
    wlanxx0 renamed to wlan1
    ndiswrapper: changing interface name from 'wlanxx0' to 'wlan1'
    device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    loop: loaded (max 8 devices)
    NTFS driver 2.1.27 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on hda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    AppArmor: AppArmor initialized
    audit(1176914506.029:2): AppArmor initialized
    
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    powernow-k8: Processor cpuid 6a0 not supported
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    audit(1176907321.865:3): audit_pid=3428 old=0 by auid=4294967295
    eth0: Media Link On 100mbps full-duplex 
    i2c_adapter i2c-1: SMBus Quick command not supported, can't probe for chips
    i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
    i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
    eth0: no IPv6 routers present
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISO 9660 Extensions: RRIP_1991A
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    NFSD: starting 90-second grace period
    SCSI subsystem initialized
    st: Version 20050830, fixed bufsize 32768, s/g segs 256
    ndiswrapper: device wlan1 removed
    ACPI: PCI interrupt for device 0000:00:0a.0 disabled
    usbcore: deregistering driver ndiswrapper
    ohci_hcd 0000:00:03.1: remove, state 1
    usb usb2: USB disconnect, address 1
    usb 2-2: USB disconnect, address 2
    ohci_hcd 0000:00:03.1: USB bus 2 deregistered
    ACPI: PCI interrupt for device 0000:00:03.1 disabled
    ohci_hcd 0000:00:03.0: remove, state 1
    usb usb1: USB disconnect, address 1
    usb 1-2: USB disconnect, address 11
    ohci_hcd 0000:00:03.0: USB bus 1 deregistered
    ACPI: PCI interrupt for device 0000:00:03.0 disabled
    Freezing cpus ...
    Stopping tasks: ====================================================================================|
    Shrinking memory...  -\|/-\|/-done (78968 pages freed)
    pnp: Device 00:0a disabled.
    pnp: Device 00:09 disabled.
    pnp: Device 00:07 disabled.
    NVRM: RmPowerManagement: 3
    ACPI: PCI interrupt for device 0000:00:0c.0 disabled
    ACPI: PCI interrupt for device 0000:00:03.2 disabled
    ....
    swsusp: Need to copy 99731 pages
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    swsusp: Restoring Highmem
    PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 2800007, writing 82800000)
    PM: Writing back config space on device 0000:00:03.1 at offset 1 (was 2800007, writing 2800000)
    ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
    PM: Writing back config space on device 0000:00:03.2 at offset 3 (was 2008, writing 2000)
    usb usb3: root hub lost power or was reset
    PCI: cache line size of 64 is not supported by device 0000:00:03.2
    ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2100107, writing 2100100)
    PM: Writing back config space on device 0000:00:0c.0 at offset 1 (was 2900105, writing 2900100)
    PCI: Enabling device 0000:00:0c.0 (0100 -> 0101)
    ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 209
    NVRM: RmPowerManagement: 4
    pnp: Device 00:07 activated.
    pnp: Device 00:09 activated.
    pnp: Device 00:0a activated.
    Restarting tasks... done
    Thawing cpus ...
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169
    ohci_hcd 0000:00:03.0: OHCI Host Controller
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:03.0: irq 169, io mem 0xcfffd000
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: OHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb1: SerialNumber: 0000:00:03.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
    ohci_hcd 0000:00:03.1: OHCI Host Controller
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.1: irq 185, io mem 0xcfffe000
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb2: SerialNumber: 0000:00:03.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    usb 1-1: new full speed USB device using ohci_hcd and address 2
    usb 1-1: device descriptor read/64, error -110
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 00000004 03008000 
    ndiswrapper version 1.25 loaded (preempt=no,smp=yes)
    ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
    PCI: Enabling device 0000:00:0a.0 (0100 -> 0102)
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
    usb 1-1: device descriptor read/64, error -110
    ndiswrapper: using IRQ 177
    usb 1-1: new full speed USB device using ohci_hcd and address 3
    eth0: Media Link On 100mbps full-duplex 
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: device descriptor read/64, error -110
    wlan0: vendor: 'TNET1130'
    wlan0: ethernet device 00:13:46:b0:a6:3f using NDIS driver gplus, 104C:9066.5.conf
    wlan0: encryption modes supported: WEP; TKIP with WPA
    wlan0 renamed to wlan1
    ndiswrapper: changing interface name from 'wlan0' to 'wlan1'
    usb 1-1: new full speed USB device using ohci_hcd and address 4
    usb 1-1: device not accepting address 4, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 5
    usb 1-1: device not accepting address 5, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 6
    usb 1-2: new device found, idVendor=047b, idProduct=0002
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB Keyboard and Mouse
    usb 1-2: Manufacturer: SILITEK
    usb 1-2: configuration #1 chosen from 1 choice
    input: SILITEK USB Keyboard and Mouse as /class/input/input4
    input: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    input: SILITEK USB Keyboard and Mouse as /class/input/input5
    input: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    usb 2-2: new low speed USB device using ohci_hcd and address 2
    usb 2-2: new device found, idVendor=046d, idProduct=c03d
    usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: USB-PS/2 Optical Mouse
    usb 2-2: Manufacturer: Logitech
    usb 2-2: configuration #1 chosen from 1 choice
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2
    usbcore: registered new driver ndiswrapper
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ndiswrapper: device wlan1 removed
    ACPI: PCI interrupt for device 0000:00:0a.0 disabled
    usbcore: deregistering driver ndiswrapper
    ohci_hcd 0000:00:03.1: remove, state 1
    usb usb2: USB disconnect, address 1
    usb 2-2: USB disconnect, address 2
    ohci_hcd 0000:00:03.1: USB bus 2 deregistered
    ACPI: PCI interrupt for device 0000:00:03.1 disabled
    ohci_hcd 0000:00:03.0: remove, state 1
    usb usb1: USB disconnect, address 1
    usb 1-2: USB disconnect, address 6
    ohci_hcd 0000:00:03.0: USB bus 1 deregistered
    ACPI: PCI interrupt for device 0000:00:03.0 disabled
    Freezing cpus ...
    Stopping tasks: ===================================================================================|
    Shrinking memory...  -\|done (22795 pages freed)
    pnp: Device 00:0a disabled.
    pnp: Device 00:09 disabled.
    pnp: Device 00:07 disabled.
    NVRM: RmPowerManagement: 3
    ACPI: PCI interrupt for device 0000:00:0c.0 disabled
    ACPI: PCI interrupt for device 0000:00:03.2 disabled
    ....
    swsusp: Need to copy 89932 pages
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    swsusp: Restoring Highmem
    PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 2800007, writing 2800000)
    PM: Writing back config space on device 0000:00:03.1 at offset 1 (was 2800007, writing 2800000)
    ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
    PM: Writing back config space on device 0000:00:03.2 at offset 3 (was 2008, writing 2000)
    usb usb3: root hub lost power or was reset
    PCI: cache line size of 64 is not supported by device 0000:00:03.2
    ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2100107, writing 2100100)
    PM: Writing back config space on device 0000:00:0c.0 at offset 1 (was 2900105, writing 2900100)
    PCI: Enabling device 0000:00:0c.0 (0100 -> 0101)
    ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 209
    NVRM: RmPowerManagement: 4
    pnp: Device 00:07 activated.
    pnp: Device 00:09 activated.
    pnp: Device 00:0a activated.
    Restarting tasks... done
    Thawing cpus ...
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169
    ohci_hcd 0000:00:03.0: OHCI Host Controller
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:03.0: irq 169, io mem 0xcfffd000
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: OHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb1: SerialNumber: 0000:00:03.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
    ohci_hcd 0000:00:03.1: OHCI Host Controller
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.1: irq 185, io mem 0xcfffe000
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb2: SerialNumber: 0000:00:03.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    usb 1-1: new full speed USB device using ohci_hcd and address 2
    usb 1-1: device descriptor read/64, error -110
    ndiswrapper version 1.25 loaded (preempt=no,smp=yes)
    ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
    PCI: Enabling device 0000:00:0a.0 (0100 -> 0102)
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 00000004 03008000 
    usb 1-1: device descriptor read/64, error -110
    ndiswrapper: using IRQ 177
    usb 1-1: new full speed USB device using ohci_hcd and address 3
    usb 1-1: device descriptor read/64, error -110
    eth0: Media Link On 100mbps full-duplex 
    wlan0: vendor: 'TNET1130'
    wlan0: ethernet device 00:13:46:b0:a6:3f using NDIS driver gplus, 104C:9066.5.conf
    wlan0: encryption modes supported: WEP; TKIP with WPA
    usb 1-1: device descriptor read/64, error -110
    wlan0 renamed to wlan1
    ndiswrapper: changing interface name from 'wlan0' to 'wlan1'
    usb 1-1: new full speed USB device using ohci_hcd and address 4
    usb 1-1: device not accepting address 4, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 5
    usb 1-1: device not accepting address 5, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 6
    usb 1-2: new device found, idVendor=047b, idProduct=0002
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB Keyboard and Mouse
    usb 1-2: Manufacturer: SILITEK
    usb 1-2: configuration #1 chosen from 1 choice
    input: SILITEK USB Keyboard and Mouse as /class/input/input7
    input: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    input: SILITEK USB Keyboard and Mouse as /class/input/input8
    input: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    usb 2-2: new low speed USB device using ohci_hcd and address 2
    usb 2-2: new device found, idVendor=046d, idProduct=c03d
    usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: USB-PS/2 Optical Mouse
    usb 2-2: Manufacturer: Logitech
    usb 2-2: configuration #1 chosen from 1 choice
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input9
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2
    usbcore: registered new driver ndiswrapper
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ndiswrapper: device wlan1 removed
    ACPI: PCI interrupt for device 0000:00:0a.0 disabled
    usbcore: deregistering driver ndiswrapper
    ohci_hcd 0000:00:03.1: remove, state 1
    usb usb2: USB disconnect, address 1
    usb 2-2: USB disconnect, address 2
    ohci_hcd 0000:00:03.1: USB bus 2 deregistered
    ACPI: PCI interrupt for device 0000:00:03.1 disabled
    ohci_hcd 0000:00:03.0: remove, state 1
    usb usb1: USB disconnect, address 1
    usb 1-2: USB disconnect, address 6
    ohci_hcd 0000:00:03.0: USB bus 1 deregistered
    ACPI: PCI interrupt for device 0000:00:03.0 disabled
    Freezing cpus ...
    Stopping tasks: ====================================================================================|
    Shrinking memory...  -\|/-\done (35272 pages freed)
    pnp: Device 00:0a disabled.
    pnp: Device 00:09 disabled.
    pnp: Device 00:07 disabled.
    NVRM: RmPowerManagement: 3
    ACPI: PCI interrupt for device 0000:00:0c.0 disabled
    ACPI: PCI interrupt for device 0000:00:03.2 disabled
    ....
    swsusp: Need to copy 90146 pages
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    swsusp: Restoring Highmem
    PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 2800007, writing 2800000)
    PM: Writing back config space on device 0000:00:03.1 at offset 1 (was 2800007, writing 2800000)
    ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
    PM: Writing back config space on device 0000:00:03.2 at offset 3 (was 2008, writing 2000)
    usb usb3: root hub lost power or was reset
    PCI: cache line size of 64 is not supported by device 0000:00:03.2
    ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2100107, writing 2100100)
    PM: Writing back config space on device 0000:00:0c.0 at offset 1 (was 2900105, writing 2900100)
    PCI: Enabling device 0000:00:0c.0 (0100 -> 0101)
    ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 209
    NVRM: RmPowerManagement: 4
    pnp: Device 00:07 activated.
    pnp: Device 00:09 activated.
    pnp: Device 00:0a activated.
    Restarting tasks... done
    Thawing cpus ...
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169
    ohci_hcd 0000:00:03.0: OHCI Host Controller
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:03.0: irq 169, io mem 0xcfffd000
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: OHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb1: SerialNumber: 0000:00:03.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
    ohci_hcd 0000:00:03.1: OHCI Host Controller
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.1: irq 185, io mem 0xcfffe000
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb2: SerialNumber: 0000:00:03.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    usb 1-1: new full speed USB device using ohci_hcd and address 2
    usb 1-1: device descriptor read/64, error -110
    ndiswrapper version 1.25 loaded (preempt=no,smp=yes)
    ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
    PCI: Enabling device 0000:00:0a.0 (0100 -> 0102)
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 00000004 03008000 
    ndiswrapper: using IRQ 177
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 3
    usb 1-1: device descriptor read/64, error -110
    wlan0: vendor: 'TNET1130'
    wlan0: ethernet device 00:13:46:b0:a6:3f using NDIS driver gplus, 104C:9066.5.conf
    wlan0: encryption modes supported: WEP; TKIP with WPA
    eth0: Media Link On 100mbps full-duplex 
    usb 1-1: device descriptor read/64, error -110
    wlan0 renamed to wlan1
    ndiswrapper: changing interface name from 'wlan0' to 'wlan1'
    usb 1-1: new full speed USB device using ohci_hcd and address 4
    usb 1-1: device not accepting address 4, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 5
    usb 1-1: device not accepting address 5, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 6
    usb 1-2: new device found, idVendor=047b, idProduct=0002
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB Keyboard and Mouse
    usb 1-2: Manufacturer: SILITEK
    usb 1-2: configuration #1 chosen from 1 choice
    input: SILITEK USB Keyboard and Mouse as /class/input/input10
    input: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    input: SILITEK USB Keyboard and Mouse as /class/input/input11
    input: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    usb 2-2: new low speed USB device using ohci_hcd and address 2
    usb 2-2: new device found, idVendor=046d, idProduct=c03d
    usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: USB-PS/2 Optical Mouse
    usb 2-2: Manufacturer: Logitech
    usb 2-2: configuration #1 chosen from 1 choice
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input12
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2
    usbcore: registered new driver ndiswrapper
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ndiswrapper: device wlan1 removed
    ACPI: PCI interrupt for device 0000:00:0a.0 disabled
    usbcore: deregistering driver ndiswrapper
    ohci_hcd 0000:00:03.1: remove, state 1
    usb usb2: USB disconnect, address 1
    usb 2-2: USB disconnect, address 2
    ohci_hcd 0000:00:03.1: USB bus 2 deregistered
    ACPI: PCI interrupt for device 0000:00:03.1 disabled
    ohci_hcd 0000:00:03.0: remove, state 1
    usb usb1: USB disconnect, address 1
    usb 1-2: USB disconnect, address 6
    ohci_hcd 0000:00:03.0: USB bus 1 deregistered
    ACPI: PCI interrupt for device 0000:00:03.0 disabled
    Freezing cpus ...
    Stopping tasks: =====================================================================================|
    Shrinking memory...  -\done (17496 pages freed)
    pnp: Device 00:0a disabled.
    pnp: Device 00:09 disabled.
    pnp: Device 00:07 disabled.
    NVRM: RmPowerManagement: 3
    ACPI: PCI interrupt for device 0000:00:0c.0 disabled
    ACPI: PCI interrupt for device 0000:00:03.2 disabled
    ....
    swsusp: Need to copy 81345 pages
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    swsusp: Restoring Highmem
    PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 2800007, writing 2800000)
    PM: Writing back config space on device 0000:00:03.1 at offset 1 (was 2800007, writing 2800000)
    ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
    PM: Writing back config space on device 0000:00:03.2 at offset 3 (was 2008, writing 2000)
    usb usb3: root hub lost power or was reset
    PCI: cache line size of 64 is not supported by device 0000:00:03.2
    ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2100107, writing 2100100)
    PM: Writing back config space on device 0000:00:0c.0 at offset 1 (was 2900105, writing 2900100)
    PCI: Enabling device 0000:00:0c.0 (0100 -> 0101)
    ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 209
    NVRM: RmPowerManagement: 4
    pnp: Device 00:07 activated.
    pnp: Device 00:09 activated.
    pnp: Device 00:0a activated.
    Restarting tasks... done
    Thawing cpus ...
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169
    ohci_hcd 0000:00:03.0: OHCI Host Controller
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:03.0: irq 169, io mem 0xcfffd000
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: OHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb1: SerialNumber: 0000:00:03.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
    ohci_hcd 0000:00:03.1: OHCI Host Controller
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.1: irq 185, io mem 0xcfffe000
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
    usb usb2: SerialNumber: 0000:00:03.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    usb 1-1: new full speed USB device using ohci_hcd and address 2
    usb 1-1: device descriptor read/64, error -110
    ndiswrapper version 1.25 loaded (preempt=no,smp=yes)
    ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
    PCI: Enabling device 0000:00:0a.0 (0100 -> 0102)
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
    usb 1-1: device descriptor read/64, error -110
    ndiswrapper: using IRQ 177
    usb 1-1: new full speed USB device using ohci_hcd and address 3
    usb 1-1: device descriptor read/64, error -110
    wlan0: vendor: 'TNET1130'
    wlan0: ethernet device 00:13:46:b0:a6:3f using NDIS driver gplus, 104C:9066.5.conf
    wlan0: encryption modes supported: WEP; TKIP with WPA
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout, status 00000004 03008000 
    wlan0 renamed to wlan1
    ndiswrapper: changing interface name from 'wlan0' to 'wlan1'
    usb 1-1: device descriptor read/64, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 4
    usb 1-1: device not accepting address 4, error -110
    usb 1-1: new full speed USB device using ohci_hcd and address 5
    eth0: Media Link On 100mbps full-duplex 
    usb 1-1: device not accepting address 5, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 6
    usb 1-2: new device found, idVendor=047b, idProduct=0002
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB Keyboard and Mouse
    usb 1-2: Manufacturer: SILITEK
    usb 1-2: configuration #1 chosen from 1 choice
    input: SILITEK USB Keyboard and Mouse as /class/input/input13
    input: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    input: SILITEK USB Keyboard and Mouse as /class/input/input14
    input: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    usb 2-2: new low speed USB device using ohci_hcd and address 2
    usb 2-2: new device found, idVendor=046d, idProduct=c03d
    usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: USB-PS/2 Optical Mouse
    usb 2-2: Manufacturer: Logitech
    usb 2-2: configuration #1 chosen from 1 choice
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input15
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2
    usbcore: registered new driver ndiswrapper
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    lirc_dev: IR Remote Control driver registered, at major 61 
    lirc_serial: auto-detected active low receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    usb 3-2: new high speed USB device using ehci_hcd and address 17
    usb 3-2: new device found, idVendor=04b4, idProduct=6830
    usb 3-2: new device strings: Mfr=0, Product=57, SerialNumber=44
    usb 3-2: Product: Cypress AT2LP
    usb 3-2: SerialNumber: DEF10D18A658
    usb 3-2: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 17
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    usb 1-2: reset low speed USB device using ohci_hcd and address 6
    usb 1-2: device descriptor read/all, error -110
      Vendor: SAMSUNG   Model: SP2514N           Rev: 0000
      Type:   Direct-Access                      ANSI SCSI revision: 00
    SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
    sda: Write Protect is off
    sda: Mode Sense: 27 00 00 00
    sda: assuming drive cache: write through
    SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
    sda: Write Protect is off
    sda: Mode Sense: 27 00 00 00
    sda: assuming drive cache: write through
     sda: sda1 sda2
    sd 0:0:0:0: Attached scsi disk sda
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    usb-storage: device scan complete
    usb 1-2: reset low speed USB device using ohci_hcd and address 6
    usb 1-2: reset low speed USB device using ohci_hcd and address 6
    usb 1-2: device firmware changed
    usb 1-2: USB disconnect, address 6
    usb 1-2: new low speed USB device using ohci_hcd and address 7
    usb 1-2: unable to read config index 0 descriptor/all
    usb 1-2: can't read configurations, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 8
    usb 1-2: device descriptor read/all, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 9
    usb 1-2: unable to read config index 0 descriptor/all
    usb 1-2: can't read configurations, error -84
    usb 1-2: new low speed USB device using ohci_hcd and address 10
    usb 1-2: device descriptor read/all, error -84
    usb 1-2: new low speed USB device using ohci_hcd and address 11
    usb 1-2: device descriptor read/all, error -110
    usb 1-2: new low speed USB device using ohci_hcd and address 12
    usb 1-2: new low speed USB device using ohci_hcd and address 13
    usb 1-2: new device found, idVendor=047b, idProduct=0002
    usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2: Product: USB Keyboard and Mouse
    usb 1-2: Manufacturer: SILITEK
    usb 1-2: configuration #1 chosen from 1 choice
    input: SILITEK USB Keyboard and Mouse as /class/input/input16
    input: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    input: SILITEK USB Keyboard and Mouse as /class/input/input17
    input: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:03.0-2
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 1-2: reset low speed USB device using ohci_hcd and address 13
    usb 1-2: reset low speed USB device using ohci_hcd and address 13
    usb 3-2: USB disconnect, address 17

  2. #2
    Registrierter Benutzer Avatar von jeppo
    Registriert seit
    Dec 2001
    Ort
    Neuss
    Beiträge
    888
    hatte mal ähnliches problem mein netzteil war zu schwach nach austausch lief alles wunderbar

    oder alternativ nen hub mit eigener stromversorgung benutzen

  3. #3
    Registrierter Benutzer
    Registriert seit
    Feb 2007
    Beiträge
    5
    das kann eg nicht sein, habe erst ein neues Netzteil eingebaut! (sicher ausreichend)

    und am usb-anschluss haengen nur die maus und tastatur! die hdd hat ein eigenes netzteil!

    Glaube kaum dass es daran liegt

Ähnliche Themen

  1. eeprom-Problem(?) mit Pinnacle USB Hybrid Pro DVB-T
    Von yucosuma im Forum Fernsehen
    Antworten: 2
    Letzter Beitrag: 16.04.07, 22:22
  2. USB-Festplatten beim booten erkennen / mounten
    Von Stradti im Forum System installieren und konfigurieren
    Antworten: 8
    Letzter Beitrag: 06.10.06, 20:01
  3. Probleme mit Totem
    Von moul im Forum Fernsehen
    Antworten: 11
    Letzter Beitrag: 02.07.06, 23:34
  4. USB Kartenleser/Hub: usb-storage Devicescan Problem
    Von Skipper im Forum stationäre Hardware
    Antworten: 1
    Letzter Beitrag: 22.05.05, 14:53
  5. Der (nicht willige) USB-Hub
    Von netswipe im Forum stationäre Hardware
    Antworten: 2
    Letzter Beitrag: 06.04.05, 11:20

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •