Drucker (Epson Stylus CX3650) druckt NUR in YAST

[dsiggi]

HI,
ich habe mir vor kurzem SuSE 10.0 installiert. Davor hatte ich SuSE 9.2 und mein Drucker funktioniert einwandfrei.
Ich habe die Drucker- und Scannertreiber von Epkowa installiert und in Yast eingestellt.
Der Testdruck unter Yast funktioniert auch einwandfrei. Aber wenn ich mit einem Programm drucken möchte, wird die Datei zwar an die Warteschlange gesendet, aber mit 0 Seiten, d.h. der Drucker druckt nichts.
In einem anderem Beitrag habe ich gelesen, das in der date /etc/hosts folgendes stehen muss:

127.0.0.1      localhost

Dies ist bei mir der Fall.
Was könnte noch das Problem sein?

dsiggi

[DERRICHTER]

Hast Du den Druck mal als root versucht? Eventuell ist es nur eine Frage der Rechte!

[pferdefreund]

Schau dir mal die Ausgaben in /var/log/cups an, so du cups vewendest,
eventuell steht da was zu deinem Problem,
ansonsten mal in der Konsole ein lpr irgendeintext.txt - eventuell sieht man
da ja auch ne Fehlermeldung

[dsiggi]

HI,
übe den Befehl "lp(r) ka.txt" kann ich sowohl als User als auch als Root drucken.

dsiggi

[pferdefreund]

Dann ist cups ja schon mal funktionstüchtig - dann liegts eventuell an den
Druckereinstellungen deiner anderen Programme
Eventuell beim Druckbefehl -oraw anfügen - Hab in Opera z. b nicht den
vorgeschlagenen printer eingestellt - sondern Reiter Druckprogramm aktiviert.
Hier ist /usr/bin/lpr eingetragen und als Option -oraw - und es funktioniert damit.
Ähnlich mußte ich on Open-Office vorgehen.

[dsiggi]

Hi,
hab deinen Vorschlag befolgt, und nun funktionierts. Kommisch das es nicht mehr über CUPS geht.

dsiggi

[dsiggi]

Hi,
mein Drucker geht schon wieder nicht. Er funktioier nur unter YaST. Auch lp oder lpr funktionieren nicht mehr. Ich habe keine Einstellungen verändert. Hier mal die error.log von CUPS:

I [18/Nov/2006:10:58:23 +0100] Listening to 0:631
I [18/Nov/2006:10:58:23 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [18/Nov/2006:10:58:23 +0100] Configured for up to 100 clients.
I [18/Nov/2006:10:58:23 +0100] Allowing up to 100 client connections per host.
I [18/Nov/2006:10:58:23 +0100] Full reload is required.
I [18/Nov/2006:10:58:25 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3765 PPDs...
I [18/Nov/2006:10:58:26 +0100] LoadPPDs: No new or changed PPDs...
I [18/Nov/2006:10:58:26 +0100] Full reload complete.
I [18/Nov/2006:13:31:47 +0100] Adding start banner page "none" to job 18.
I [18/Nov/2006:13:31:47 +0100] Adding end banner page "none" to job 18.
I [18/Nov/2006:13:31:47 +0100] Job 18 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:31:47 +0100] Started filter /usr/lib/cups/filter/pstops (PID 9400) for job 18.
I [18/Nov/2006:13:31:47 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 9401) for job 18.
I [18/Nov/2006:13:31:47 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 9402) for job 18.
I [18/Nov/2006:13:31:47 +0100] Started backend /usr/lib/cups/backend/usb (PID 9403) for job 18.
E [18/Nov/2006:13:31:47 +0100] PID 9402 stopped with status 0!
I [18/Nov/2006:13:31:47 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:33:14 +0100] Adding start banner page "none" to job 19.
I [18/Nov/2006:13:33:14 +0100] Adding end banner page "none" to job 19.
I [18/Nov/2006:13:33:14 +0100] Job 19 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:33:14 +0100] Started filter /usr/lib/cups/filter/pstops (PID 9456) for job 19.
I [18/Nov/2006:13:33:14 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 9457) for job 19.
I [18/Nov/2006:13:33:14 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 9458) for job 19.
I [18/Nov/2006:13:33:14 +0100] Started backend /usr/lib/cups/backend/usb (PID 9459) for job 19.
E [18/Nov/2006:13:33:14 +0100] PID 9458 stopped with status 0!
I [18/Nov/2006:13:33:14 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:33:32 +0100] Adding start banner page "none" to job 20.
I [18/Nov/2006:13:33:32 +0100] Adding end banner page "none" to job 20.
I [18/Nov/2006:13:33:32 +0100] Job 20 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:33:32 +0100] Started filter /usr/lib/cups/filter/pstops (PID 9476) for job 20.
I [18/Nov/2006:13:33:32 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 9477) for job 20.
I [18/Nov/2006:13:33:32 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 9478) for job 20.
I [18/Nov/2006:13:33:32 +0100] Started backend /usr/lib/cups/backend/usb (PID 9479) for job 20.
E [18/Nov/2006:13:33:32 +0100] PID 9478 stopped with status 0!
I [18/Nov/2006:13:33:32 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:34:19 +0100] Adding start banner page "none" to job 21.
I [18/Nov/2006:13:34:19 +0100] Adding end banner page "none" to job 21.
I [18/Nov/2006:13:34:19 +0100] Job 21 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:34:19 +0100] Started filter /usr/lib/cups/filter/pstops (PID 9553) for job 21.
I [18/Nov/2006:13:34:19 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 9554) for job 21.
I [18/Nov/2006:13:34:19 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 9555) for job 21.
I [18/Nov/2006:13:34:19 +0100] Started backend /usr/lib/cups/backend/usb (PID 9556) for job 21.
E [18/Nov/2006:13:34:19 +0100] PID 9555 stopped with status 0!
I [18/Nov/2006:13:34:19 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:35:35 +0100] Adding start banner page "none" to job 22.
I [18/Nov/2006:13:35:35 +0100] Adding end banner page "none" to job 22.
I [18/Nov/2006:13:35:35 +0100] Job 22 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:35:35 +0100] Started filter /usr/lib/cups/filter/pstops (PID 9712) for job 22.
I [18/Nov/2006:13:35:35 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 9713) for job 22.
I [18/Nov/2006:13:35:35 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 9714) for job 22.
I [18/Nov/2006:13:35:35 +0100] Started backend /usr/lib/cups/backend/usb (PID 9715) for job 22.
E [18/Nov/2006:13:35:35 +0100] PID 9714 stopped with status 0!
I [18/Nov/2006:13:35:35 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:35:55 +0100] Adding start banner page "none" to job 23.
I [18/Nov/2006:13:35:55 +0100] Adding end banner page "none" to job 23.
I [18/Nov/2006:13:35:55 +0100] Job 23 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:35:55 +0100] Started filter /usr/lib/cups/filter/pstops (PID 9737) for job 23.
I [18/Nov/2006:13:35:55 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 9738) for job 23.
I [18/Nov/2006:13:35:55 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 9739) for job 23.
I [18/Nov/2006:13:35:55 +0100] Started backend /usr/lib/cups/backend/usb (PID 9740) for job 23.
E [18/Nov/2006:13:35:55 +0100] PID 9739 stopped with status 0!
I [18/Nov/2006:13:35:55 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:37:57 +0100] Setting epson device-uri to "epson:/dev/lp0" (was "file:/dev/null".)
I [18/Nov/2006:13:37:57 +0100] Saving printers.conf...
I [18/Nov/2006:13:37:57 +0100] New printer 'epson' added by 'root'.
I [18/Nov/2006:13:37:57 +0100] Saving printers.conf...
I [18/Nov/2006:13:37:57 +0100] Printer 'epson' modified by 'root'.
I [18/Nov/2006:13:37:57 +0100] Saving printers.conf...
I [18/Nov/2006:13:37:57 +0100] Printer 'epson' now accepting jobs ('root').
I [18/Nov/2006:13:37:57 +0100] Saving printers.conf...
I [18/Nov/2006:13:37:57 +0100] Printer 'epson' started by 'root'.
I [18/Nov/2006:13:38:05 +0100] Adding start banner page "none" to job 24.
I [18/Nov/2006:13:38:05 +0100] Adding end banner page "none" to job 24.
I [18/Nov/2006:13:38:05 +0100] Job 24 queued on 'epson' by 'siggi'.
I [18/Nov/2006:13:38:05 +0100] Started filter /usr/lib/cups/filter/pstops (PID 9792) for job 24.
I [18/Nov/2006:13:38:05 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 9793) for job 24.
I [18/Nov/2006:13:38:05 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 9794) for job 24.
I [18/Nov/2006:13:38:05 +0100] Started backend /usr/lib/cups/backend/epson (PID 9795) for job 24.
E [18/Nov/2006:13:38:05 +0100] PID 9794 stopped with status 0!
I [18/Nov/2006:13:38:05 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:38:46 +0100] Scheduler shutting down normally.
I [18/Nov/2006:13:38:46 +0100] Listening to 0:631
I [18/Nov/2006:13:38:46 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [18/Nov/2006:13:38:46 +0100] Configured for up to 100 clients.
I [18/Nov/2006:13:38:46 +0100] Allowing up to 100 client connections per host.
I [18/Nov/2006:13:38:46 +0100] Full reload is required.
I [18/Nov/2006:13:38:47 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3765 PPDs...
I [18/Nov/2006:13:38:47 +0100] LoadPPDs: No new or changed PPDs...
I [18/Nov/2006:13:38:47 +0100] Full reload complete.
I [18/Nov/2006:13:38:48 +0100] Printer 'styluscx3600' deleted by 'root'.
I [18/Nov/2006:13:38:48 +0100] Saving printers.conf...
I [18/Nov/2006:13:38:48 +0100] Printer 'epson' deleted by 'root'.
I [18/Nov/2006:13:38:48 +0100] Saving printers.conf...
E [18/Nov/2006:13:38:48 +0100] set_default: resource name '/printers/' no good!
I [18/Nov/2006:13:38:48 +0100] Scheduler shutting down normally.
I [18/Nov/2006:13:38:48 +0100] Listening to 0:631
I [18/Nov/2006:13:38:48 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [18/Nov/2006:13:38:48 +0100] Configured for up to 100 clients.
I [18/Nov/2006:13:38:48 +0100] Allowing up to 100 client connections per host.
I [18/Nov/2006:13:38:48 +0100] Full reload is required.
I [18/Nov/2006:13:38:49 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3765 PPDs...
I [18/Nov/2006:13:38:49 +0100] LoadPPDs: No new or changed PPDs...
I [18/Nov/2006:13:38:49 +0100] Full reload complete.
I [18/Nov/2006:13:39:22 +0100] Scheduler shutting down normally.
I [18/Nov/2006:13:39:22 +0100] Listening to 0:631
I [18/Nov/2006:13:39:22 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [18/Nov/2006:13:39:22 +0100] Configured for up to 100 clients.
I [18/Nov/2006:13:39:22 +0100] Allowing up to 100 client connections per host.
I [18/Nov/2006:13:39:22 +0100] Full reload is required.
I [18/Nov/2006:13:39:22 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3765 PPDs...
I [18/Nov/2006:13:39:22 +0100] LoadPPDs: No new or changed PPDs...
I [18/Nov/2006:13:39:22 +0100] Full reload complete.
I [18/Nov/2006:13:39:24 +0100] Setting styluscx3600 device-uri to "usb://EPSON/Stylus%20CX3600" (was "file:/dev/null".)
I [18/Nov/2006:13:39:24 +0100] Setting styluscx3600 printer-is-accepting-jobs to 1 (was 0.)
I [18/Nov/2006:13:39:24 +0100] Setting styluscx3600 printer-state to 3 (was 5.)
I [18/Nov/2006:13:39:24 +0100] Saving printers.conf...
I [18/Nov/2006:13:39:24 +0100] New printer 'styluscx3600' added by 'root'.
I [18/Nov/2006:13:39:24 +0100] Saving printers.conf...
I [18/Nov/2006:13:39:24 +0100] Saving classes.conf...
I [18/Nov/2006:13:39:24 +0100] Default destination set to 'styluscx3600' by 'root'.
I [18/Nov/2006:13:39:24 +0100] Scheduler shutting down normally.
I [18/Nov/2006:13:39:24 +0100] Listening to 0:631
I [18/Nov/2006:13:39:24 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [18/Nov/2006:13:39:24 +0100] Configured for up to 100 clients.
I [18/Nov/2006:13:39:24 +0100] Allowing up to 100 client connections per host.
I [18/Nov/2006:13:39:24 +0100] Full reload is required.
I [18/Nov/2006:13:39:25 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3765 PPDs...
I [18/Nov/2006:13:39:25 +0100] LoadPPDs: No new or changed PPDs...
I [18/Nov/2006:13:39:25 +0100] Full reload complete.
I [18/Nov/2006:13:39:35 +0100] Adding start banner page "none" to job 1.
I [18/Nov/2006:13:39:35 +0100] Adding end banner page "none" to job 1.
I [18/Nov/2006:13:39:35 +0100] Job 1 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:39:35 +0100] Started filter /usr/lib/cups/filter/pstops (PID 10724) for job 1.
I [18/Nov/2006:13:39:35 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 10725) for job 1.
I [18/Nov/2006:13:39:35 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 10726) for job 1.
I [18/Nov/2006:13:39:35 +0100] Started backend /usr/lib/cups/backend/usb (PID 10727) for job 1.
E [18/Nov/2006:13:39:35 +0100] PID 10726 stopped with status 0!
I [18/Nov/2006:13:39:35 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:39:51 +0100] Adding start banner page "none" to job 2.
I [18/Nov/2006:13:39:51 +0100] Adding end banner page "none" to job 2.
I [18/Nov/2006:13:39:51 +0100] Job 2 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:39:51 +0100] Started filter /usr/lib/cups/filter/imagetoraster (PID 10746) for job 2.
I [18/Nov/2006:13:39:51 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 10747) for job 2.
I [18/Nov/2006:13:39:51 +0100] Started backend /usr/lib/cups/backend/usb (PID 10748) for job 2.
E [18/Nov/2006:13:39:51 +0100] PID 10747 stopped with status 0!
I [18/Nov/2006:13:39:51 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
E [18/Nov/2006:13:39:51 +0100] [Job 2] Unable to write raster data to driver!
E [18/Nov/2006:13:39:51 +0100] PID 10746 stopped with status 1!
I [18/Nov/2006:13:39:51 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:41:13 +0100] Adding start banner page "none" to job 3.
I [18/Nov/2006:13:41:13 +0100] Adding end banner page "none" to job 3.
I [18/Nov/2006:13:41:13 +0100] Job 3 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:41:13 +0100] Started filter /usr/lib/cups/filter/imagetoraster (PID 10906) for job 3.
I [18/Nov/2006:13:41:13 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 10907) for job 3.
I [18/Nov/2006:13:41:13 +0100] Started backend /usr/lib/cups/backend/usb (PID 10908) for job 3.
E [18/Nov/2006:13:41:13 +0100] PID 10907 stopped with status 0!
I [18/Nov/2006:13:41:13 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
E [18/Nov/2006:13:41:13 +0100] [Job 3] Unable to write raster data to driver!
E [18/Nov/2006:13:41:13 +0100] PID 10906 stopped with status 1!
I [18/Nov/2006:13:41:13 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:41:57 +0100] Adding start banner page "none" to job 4.
I [18/Nov/2006:13:41:57 +0100] Adding end banner page "none" to job 4.
I [18/Nov/2006:13:41:57 +0100] Job 4 queued on 'styluscx3600' by 'root'.
I [18/Nov/2006:13:41:57 +0100] Started filter /usr/lib/cups/filter/pstops (PID 10962) for job 4.
I [18/Nov/2006:13:41:57 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 10963) for job 4.
I [18/Nov/2006:13:41:57 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 10964) for job 4.
I [18/Nov/2006:13:41:57 +0100] Started backend /usr/lib/cups/backend/usb (PID 10965) for job 4.
E [18/Nov/2006:13:41:57 +0100] PID 10964 stopped with status 0!
I [18/Nov/2006:13:41:57 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:42:44 +0100] Scheduler shutting down normally.
I [18/Nov/2006:13:42:44 +0100] Listening to 0:631
I [18/Nov/2006:13:42:44 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [18/Nov/2006:13:42:44 +0100] Configured for up to 100 clients.
I [18/Nov/2006:13:42:44 +0100] Allowing up to 100 client connections per host.
I [18/Nov/2006:13:42:44 +0100] Full reload is required.
I [18/Nov/2006:13:42:44 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3765 PPDs...
I [18/Nov/2006:13:42:44 +0100] LoadPPDs: No new or changed PPDs...
I [18/Nov/2006:13:42:44 +0100] Full reload complete.
I [18/Nov/2006:13:42:45 +0100] Setting y2test device-uri to "usb://EPSON/Stylus%20CX3600" (was "file:/dev/null".)
I [18/Nov/2006:13:42:45 +0100] Setting y2test printer-is-accepting-jobs to 1 (was 0.)
I [18/Nov/2006:13:42:45 +0100] Setting y2test printer-state to 3 (was 5.)
I [18/Nov/2006:13:42:45 +0100] Saving printers.conf...
I [18/Nov/2006:13:42:45 +0100] New printer 'y2test' added by 'root'.
I [18/Nov/2006:13:42:45 +0100] Adding start banner page "none" to job 5.
I [18/Nov/2006:13:42:45 +0100] Adding end banner page "none" to job 5.
I [18/Nov/2006:13:42:45 +0100] Job 5 queued on 'y2test' by 'root'.
I [18/Nov/2006:13:42:45 +0100] Started filter /usr/lib/cups/filter/texttops (PID 11272) for job 5.
I [18/Nov/2006:13:42:45 +0100] Started filter /usr/lib/cups/filter/pstops (PID 11273) for job 5.
I [18/Nov/2006:13:42:45 +0100] Started filter /usr/lib/cups/filter/pstoraster (PID 11274) for job 5.
I [18/Nov/2006:13:42:45 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 11275) for job 5.
I [18/Nov/2006:13:42:45 +0100] Started backend /usr/lib/cups/backend/usb (PID 11276) for job 5.
I [18/Nov/2006:13:45:32 +0100] Adding start banner page "none" to job 6.
I [18/Nov/2006:13:45:32 +0100] Adding end banner page "none" to job 6.
I [18/Nov/2006:13:45:32 +0100] Job 6 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:45:32 +0100] Started filter /usr/lib/cups/filter/imagetoraster (PID 11416) for job 6.
I [18/Nov/2006:13:45:32 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 11417) for job 6.
I [18/Nov/2006:13:45:32 +0100] Started backend /usr/lib/cups/backend/usb (PID 11418) for job 6.
E [18/Nov/2006:13:45:32 +0100] PID 11417 stopped with status 0!
I [18/Nov/2006:13:45:32 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
E [18/Nov/2006:13:45:32 +0100] PID 11416 stopped with status 1!
I [18/Nov/2006:13:45:32 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
E [18/Nov/2006:13:45:32 +0100] [Job 6] Unable to write raster data to driver!
I [18/Nov/2006:13:45:40 +0100] Adding start banner page "none" to job 7.
I [18/Nov/2006:13:45:40 +0100] Adding end banner page "none" to job 7.
I [18/Nov/2006:13:45:40 +0100] Job 7 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:45:40 +0100] Started filter /usr/lib/cups/filter/imagetoraster (PID 11425) for job 7.
I [18/Nov/2006:13:45:40 +0100] Started filter /usr/lib/cups/filter/rastertopips (PID 11426) for job 7.
I [18/Nov/2006:13:45:40 +0100] Started backend /usr/lib/cups/backend/usb (PID 11427) for job 7.
E [18/Nov/2006:13:45:40 +0100] PID 11426 stopped with status 0!
I [18/Nov/2006:13:45:40 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
E [18/Nov/2006:13:45:40 +0100] [Job 7] Unable to write raster data to driver!
E [18/Nov/2006:13:45:40 +0100] PID 11425 stopped with status 1!
I [18/Nov/2006:13:45:40 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [18/Nov/2006:13:46:15 +0100] Adding start banner page "none" to job 8.
I [18/Nov/2006:13:46:15 +0100] Adding end banner page "none" to job 8.
I [18/Nov/2006:13:46:15 +0100] Job 8 queued on 'styluscx3600' by 'siggi'.
I [18/Nov/2006:13:46:15 +0100] Started backend /usr/lib/cups/backend/usb (PID 11442) for job 8.

Ich habe schon verscuht den Drucker neu zu installieren, LPR zu benutzen, aber nichts funktioniert. Ih hoffe ihr könnt mir helfen.

dsiggi

[dsiggi]

Kann mir den keiner helfen?

dsiggi

[dsiggi]

Kann mir den keiner helfen? Ich brauch den Drucker dringend wieder.