Anzeige:
Ergebnis 1 bis 12 von 12

Thema: Probleme mit "Wine, Suse9.3, Ati 9700"

  1. #1
    Registrierter Benutzer Avatar von celine
    Registriert seit
    Sep 2004
    Ort
    Oranienburg
    Beiträge
    11

    Probleme mit "Wine, Suse9.3, Ati 9700"

    ich würde gerne wissen ob es jemand gibt der suse9.3 sowie wine in Verbindung mit einer ati9700pro zum laufen bekommen hat.
    ich benutze die fglrx treiber vom suse ftp diese sind einwandfrei installiert.
    leider stürzt mir beim start von wine immer der rechner ab (blacksreen)
    was kann das sein ?

  2. #2
    Banned Avatar von Catonga
    Registriert seit
    Nov 1999
    Beiträge
    2.389
    Zitat Zitat von celine
    ich würde gerne wissen ob es jemand gibt der suse9.3 sowie wine in Verbindung mit einer ati9700pro zum laufen bekommen hat.
    ich benutze die fglrx treiber vom suse ftp diese sind einwandfrei installiert.
    leider stürzt mir beim start von wine immer der rechner ab (blacksreen)
    was kann das sein ?
    Ein kleiner Tipp:

    Starte Wine mal mit folgendem Befehl:

    wine PROGRAMMNAME.EXE >& log.txt

    Wenn du jetzt rebooten solltest, dann sollte die Fehlerausgabe von Wine in der Datei log.txt stehen. PROGRAMMNAME.EXE solltest du natürlich durch deine EXE Datei von dem Programm das du starten willst ersetzen.

    Die log.exe Datei kannst du dann hier posten.


    Ansonsten sind noch folgende Log Dateien interessant:

    /var/log/Xorg.0.log bzw. Xorg.1.log (da ja der Rechner neu gebootet wurde)
    /var/log/messages
    /var/log/syslog
    /var/log/debug

    Die solltest du dir auch mal anschauen ob da etwas brauchbares drinsteht.
    Bei der Grafik könnte vor allem Xorg.* interessant sein.

  3. #3
    Registrierter Benutzer Avatar von celine
    Registriert seit
    Sep 2004
    Ort
    Oranienburg
    Beiträge
    11
    hier meine log.txt

    err:module:import_dll Library MFC42.DLL (which is needed by L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE") not found
    err:module:LdrInitializeThunk Main exe initialization for L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE" failed, status c0000135

    meine /var/log/messages macht mich leider auch nicht schlauer

  4. #4
    Linuxzocker Avatar von Fatty
    Registriert seit
    Apr 2001
    Ort
    /dev/bier
    Beiträge
    2.501
    Hast du auch mal versucht den X-Server mit CTRL+ALT+BACKSPACE neuzustarten oder auf eine Konsole zu wechseln? Wenn der Bildschirm schwarz bleibt heißt das noch lange nicht, dass der Rechner abgestürzt ist!

    Wenn dich die Ausgabe von /var/log/messages nicht schlauer macht könntest du die Ausgabe trotzdem mal hier posten, damit wir uns unser eigenes Urteil darüber bilden können.

    Hast du auch mal versucht ein anderes Programm zu starten? Vielleicht ist ja genau DAS EINE gar nicht lauffähig.

    BTW: Welche Wine-Version verwendest du überhaupt? Hast du die selber kompiliert oder ein Paket installiert?
    Peer-to-Peer-Telefonie mit Java gibt's nicht? Doch: Javafon!

  5. #5
    Registrierter Benutzer Avatar von celine
    Registriert seit
    Sep 2004
    Ort
    Oranienburg
    Beiträge
    11
    Zitat Zitat von Fatty
    Hast du auch mal versucht den X-Server mit CTRL+ALT+BACKSPACE neuzustarten oder auf eine Konsole zu wechseln? Wenn der Bildschirm schwarz bleibt heißt das noch lange nicht, dass der Rechner abgestürzt ist!
    ja habe ich aber ohne erfolg....

    hier ein teil meiner messages



    Jun 5 19:20:49 linux gconfd (mathias-7146): Beende
    Jun 5 19:20:49 linux init: Switching to runlevel: 6
    Jun 5 19:20:56 linux kernel: bootsplash: status on console 0 changed to on
    Jun 5 19:20:56 linux kernel: bootsplash: status on console 0 changed to on
    Jun 5 19:20:56 linux kernel: bootsplash: status on console 0 changed to on
    Jun 5 19:20:58 linux sshd[6666]: Received signal 15; terminating.
    Jun 5 19:20:58 linux smpppd[6641]: terminating on signal 15
    Jun 5 19:20:58 linux kernel: Kernel logging (proc) stopped.
    Jun 5 19:20:58 linux kernel: Kernel log daemon terminating.
    Jun 5 19:20:59 linux syslog-ng[3761]: syslog-ng version 1.6.5 going down
    Jun 5 19:22:04 linux syslog-ng[2750]: syslog-ng version 1.6.5 starting
    Jun 5 19:22:04 linux /etc/hotplug.d/pci/50-pci.hotplug[2835]: /sbin/hwup: line 77: ICH: command not found
    Jun 5 19:22:08 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Jun 5 19:22:08 linux syslog-ng[2750]: Changing permissions on special file /dev/xconsole
    Jun 5 19:22:08 linux syslog-ng[2750]: Changing permissions on special file /dev/tty10
    Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 12
    Jun 5 19:22:08 linux kernel: PCI: setting IRQ 12 as level-triggered
    Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 12 (level, low) -> IRQ 12
    Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
    Jun 5 19:22:08 linux kernel: intel8x0_measure_ac97_clock: measured 59751 usecs
    Jun 5 19:22:08 linux kernel: intel8x0: clocking to 48000
    Jun 5 19:22:08 linux kernel: Capability LSM initialized
    Jun 5 19:22:08 linux kernel: ieee1394: Initialized config rom entry `ip1394'
    Jun 5 19:22:08 linux kernel: ieee1394: raw1394: /dev/raw1394 device initialized
    Jun 5 19:22:08 linux kernel: parport: PnPBIOS parport detected.
    Jun 5 19:22:08 linux kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    Jun 5 19:22:08 linux kernel: lp0: using parport0 (interrupt-driven).
    Jun 5 19:22:08 linux kernel: video1394: Installed video1394 module
    Jun 5 19:22:08 linux kernel: bootsplash: status on console 0 changed to on
    Jun 5 19:22:08 linux kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
    Jun 5 19:22:08 linux kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
    Jun 5 19:22:08 linux kernel: usbcore: registered new driver usbfs
    Jun 5 19:22:08 linux kernel: usbcore: registered new driver hub
    Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
    Jun 5 19:22:08 linux kernel: PCI: setting IRQ 5 as level-triggered
    Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 5 (level, low) -> IRQ 5
    Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
    Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
    Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: irq 5, pci mem 0xe6000000
    Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    Jun 5 19:22:08 linux kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
    Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: park 0
    Jun 5 19:22:08 linux kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    Jun 5 19:22:08 linux kernel: hub 1-0:1.0: USB hub found
    Jun 5 19:22:08 linux kernel: hub 1-0:1.0: 6 ports detected
    Jun 5 19:22:08 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Jun 5 19:22:08 linux kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 10
    Jun 5 19:22:08 linux kernel: PCI: setting IRQ 10 as level-triggered
    Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
    Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: irq 10, pci mem 0xe6004000
    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2


    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: irq 10, pci mem 0xe6004000
    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Jun 5 19:22:08 linux kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31.
    Jun 5 19:22:08 linux kernel: hub 2-0:1.0: USB hub found
    Jun 5 19:22:08 linux kernel: hub 2-0:1.0: 3 ports detected
    Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
    Jun 5 19:22:08 linux kernel: PCI: setting IRQ 11 as level-triggered
    Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11
    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
    Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.1: irq 11, pci mem 0xe6005000
    Jun 5 19:22:08 linux kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    Jun 5 19:22:08 linux kernel: hub 1-0:1.0: over-current change on port 1
    Jun 5 19:22:08 linux kernel: hub 3-0:1.0: USB hub found
    Jun 5 19:22:08 linux kernel: hub 3-0:1.0: 3 ports detected
    Jun 5 19:22:08 linux kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
    Jun 5 19:22:08 linux kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
    Jun 5 19:22:08 linux kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
    Jun 5 19:22:08 linux kernel: eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0
    Jun 5 19:22:08 linux kernel: agpgart: Detected NVIDIA nForce2 chipset
    Jun 5 19:22:08 linux kernel: agpgart: Maximum main memory to use for agp memory: 690M
    Jun 5 19:22:08 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
    Jun 5 19:22:08 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    Jun 5 19:22:08 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
    Jun 5 19:22:10 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
    Jun 5 19:22:12 linux mDNSResponder: Unable to parse DNS server list. Unicast DNS-SD unavailable
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4637]: new block device /block/ram1
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4649]: new block device /block/ram0
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4682]: new block device /block/ram9
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4698]: new block device /block/ram10
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4742]: new block device /block/ram5
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4724]: new block device /block/ram12
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4714]: new block device /block/ram11
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4800]: new block device /block/ram7
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4679]: new block device /block/ram4
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4732]: new block device /block/ram13
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4836]: new block device /block/loop2
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4852]: new block device /block/loop3
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4661]: new block device /block/ram2
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4899]: new block device /block/ram14
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4924]: new block device /block/ram8
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4940]: new block device /block/ram15
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4956]: new block device /block/loop0
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4970]: new block device /block/ram6
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4970]: message send failed: Resource temporarily unavailable
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4984]: new block device /block/loop7
    Jun 5 19:22:12 linux /etc/hotplug.d/block/50-hwscan.hotplug[4984]: message send failed: Resource temporarily unavailable
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4671]: new block device /block/ram3
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4888]: new block device /block/loop6
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4888]: message send failed: Resource temporarily unavailable
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4879]: new block device /block/loop5
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4879]: message send failed: Resource temporarily unavailable
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: new block device /block/loop4
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: message send failed: Resource temporarily unavaila


    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: new block device /block/loop4
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[4868]: message send failed: Resource temporarily unavailable
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[5079]: new block device /block/loop1
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[5079]: message send failed: Resource temporarily unavailable
    Jun 5 19:22:13 linux /etc/hotplug.d/block/50-hwscan.hotplug[5267]: new block device /block/fd0
    Jun 5 19:22:13 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
    Jun 5 19:22:14 linux /etc/hotplug.d/block/50-hwscan.hotplug[5602]: new block device /block/hdc
    Jun 5 19:22:15 linux /etc/hotplug.d/block/50-hwscan.hotplug[5642]: new block device /block/hdd
    Jun 5 19:22:15 linux /etc/hotplug.d/block/50-hwscan.hotplug[5639]: new block device /block/hda
    Jun 5 19:22:16 linux kernel: cdrom: open failed.
    Jun 5 19:22:16 linux kernel: cdrom: open failed.
    Jun 5 19:22:16 linux kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
    Jun 5 19:22:16 linux kernel: hub 1-0:1.0: over-current change on port 2
    Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[5962]: new block device /block/hda/hda4
    Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[5975]: new block device /block/hda/hda5
    Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[5988]: new block device /block/hda/hda6
    Jun 5 19:22:18 linux kernel: SCSI subsystem initialized
    Jun 5 19:22:18 linux kernel: st: Version 20041025, fixed bufsize 32768, s/g segs 256
    Jun 5 19:22:18 linux /etc/hotplug.d/block/50-hwscan.hotplug[6087]: new block device /block/hda/hda3
    Jun 5 19:22:19 linux /etc/hotplug.d/block/50-hwscan.hotplug[6116]: new block device /block/hda/hda2
    Jun 5 19:22:19 linux /etc/hotplug.d/block/50-hwscan.hotplug[6103]: new block device /block/hda/hda1
    Jun 5 19:22:20 linux kernel: NET: Registered protocol family 10
    Jun 5 19:22:20 linux kernel: Disabled Privacy Extensions on device c033d600(lo)
    Jun 5 19:22:20 linux kernel: IPv6 over IPv4 tunneling driver
    Jun 5 19:22:20 linux kernel: Disabled Privacy Extensions on device ee8c3800(sit0)
    Jun 5 19:22:20 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
    Jun 5 19:22:21 linux hp: unable to open /var/run/hpiod.port: No such file or directory
    Jun 5 19:22:23 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
    Jun 5 19:22:23 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
    Jun 5 19:22:23 linux /usr/sbin/cron[6419]: (CRON) STARTUP (V5.0)
    Jun 5 19:22:24 linux kernel: Non-volatile memory driver v1.2
    Jun 5 19:22:24 linux kernel: end_request: I/O error, dev fd0, sector 0
    Jun 5 19:22:24 linux kernel: end_request: I/O error, dev fd0, sector 0
    Jun 5 19:22:25 linux kernel: fglrx: no version for "struct_module" found: kernel tainted.
    Jun 5 19:22:25 linux kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    Jun 5 19:22:25 linux kernel: [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
    Jun 5 19:22:25 linux kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
    Jun 5 19:22:25 linux kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 10 (level, low) -> IRQ 10
    Jun 5 19:22:25 linux kernel: [fglrx] module loaded - fglrx 8.12.10 [Apr 4 2005] on minor 0
    Jun 5 19:22:25 linux kernel: mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
    Jun 5 19:22:25 linux kernel: [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
    Jun 5 19:22:25 linux kernel: [fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
    Jun 5 19:22:25 linux kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    Jun 5 19:22:25 linux kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
    Jun 5 19:22:25 linux kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
    Jun 5 19:22:25 linux kernel: [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
    Jun 5 19:22:25 linux kernel: [fglrx] free AGP = 54800384
    Jun 5 19:22:25 linux kernel: [fglrx] max AGP = 54800384
    Jun 5 19:22:25 linux kernel: [fglrx] free LFB = 116387840
    Jun 5 19:22:25 linux kernel: [fglrx] max LFB = 116387840
    Jun 5 19:22:25 linux kernel: [fglrx] free Inv = 0
    Jun 5 19:22:25 linux kernel: [fglrx] max Inv = 0
    Jun 5 19:22:25 linux kernel: [fglrx] total Inv = 0
    Jun 5 19:22:25 linux kernel: [fglrx] total TIM = 0




    Jun 5 19:22:25 linux kernel: [fglrx] total Inv = 0
    Jun 5 19:22:25 linux kernel: [fglrx] total TIM = 0
    Jun 5 19:22:25 linux kernel: [fglrx] total FB = 0
    Jun 5 19:22:25 linux kernel: [fglrx] total AGP = 16384
    Jun 5 19:22:25 linux ifup: No configuration found for sit0
    Jun 5 19:22:26 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
    Jun 5 19:22:26 linux kernel: bootsplash: status on console 0 changed to on
    Jun 5 19:22:27 linux smpppd[6583]: smpppd version 1.58 started
    Jun 5 19:22:27 linux sshd[6652]: Server listening on :: port 22.
    Jun 5 19:22:27 linux kernel: ACPI: Power Button (FF) [PWRF]
    Jun 5 19:22:27 linux kernel: ACPI: Fan [FAN] (on)
    Jun 5 19:22:28 linux kernel: ACPI: Thermal Zone [THRM] (46 C)
    Jun 5 19:22:28 linux kdm: :0[6302]: pam_unix2: session started for user mathias, service xdm-np
    Jun 5 19:22:28 linux kernel: powernow-k8: Processor cpuid 6a0 not supported
    Jun 5 19:22:28 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
    Jun 5 19:22:28 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
    Jun 5 19:22:28 linux kernel: bootsplash: status on console 0 changed to on
    Jun 5 19:22:29 linux kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
    Jun 5 19:22:29 linux kernel: hub 1-0:1.0: over-current change on port 3
    Jun 5 19:22:29 linux kernel: hub 1-0:1.0: over-current change on port 4
    Jun 5 19:22:30 linux kernel: eth0: no IPv6 routers present
    Jun 5 19:22:32 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    Jun 5 19:22:35 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    Jun 5 19:22:38 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    Jun 5 19:22:41 linux kernel: hub 1-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    Jun 5 19:22:41 linux kernel: hub 1-0:1.0: over-current change on port 5
    Jun 5 19:22:44 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
    Jun 5 19:22:47 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
    Jun 5 19:22:49 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
    Jun 5 19:22:52 linux kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
    Jun 5 19:22:52 linux kernel: hub 1-0:1.0: over-current change on port 6
    Jun 5 19:22:55 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
    Jun 5 19:22:58 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
    Jun 5 19:23:01 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
    Jun 5 19:23:04 linux kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
    Jun 5 19:23:04 linux kernel: usbcore: registered new driver usbserial_generic
    Jun 5 19:23:04 linux kernel: ohci_hcd 0000:00:02.1: wakeup
    Jun 5 19:23:04 linux kernel: usbcore: registered new driver usbserial
    Jun 5 19:23:04 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    Jun 5 19:23:04 linux kernel: usb 3-1: new low speed USB device using ohci_hcd and address 2
    Jun 5 19:23:07 linux kernel: usbcore: registered new driver hiddev
    Jun 5 19:23:07 linux kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1
    Jun 5 19:23:07 linux kernel: usbcore: registered new driver usbhid
    Jun 5 19:23:07 linux kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
    Jun 5 19:23:14 linux kernel: subfs 0.9
    Jun 5 19:23:14 linux hal-subfs-mount[7099]: registered at resmgrd and called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec /dev/fd0 "/media/floppy"
    Jun 5 19:23:14 linux kernel: end_request: I/O error, dev fd0, sector 0
    Jun 5 19:23:24 linux gconfd (mathias-7137): (Version 2.10.0) wird gestartet, Prozesskennung 7137, Benutzer »mathias«
    Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readwrite:/home/mathias/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst



    Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readwrite:/home/mathias/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
    Jun 5 19:23:24 linux gconfd (mathias-7137): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Jun 5 19:23:59 linux pppd[7148]: Plugin rp-pppoe.so loaded.
    Jun 5 19:23:59 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
    Jun 5 19:23:59 linux kernel: PPP generic driver version 2.4.2
    Jun 5 19:23:59 linux pppd[7148]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3
    Jun 5 19:23:59 linux pppd[7148]: Plugin passwordfd.so loaded.
    Jun 5 19:23:59 linux kernel: NET: Registered protocol family 17
    Jun 5 19:23:59 linux pppd[7148]: pppd 2.4.3 started by root, uid 0
    Jun 5 19:24:00 linux pppd[7148]: PPP session is 31540
    Jun 5 19:24:00 linux kernel: NET: Registered protocol family 24
    Jun 5 19:24:00 linux pppd[7148]: Renamed interface ppp0 to dsl0
    Jun 5 19:24:00 linux pppd[7148]: Using interface dsl0
    Jun 5 19:24:00 linux pppd[7148]: Connect: dsl0 <--> eth0
    Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MTU to 1500
    Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MRU to 1500
    Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MTU to 1500
    Jun 5 19:24:00 linux pppd[7148]: Couldn't increase MRU to 1500
    Jun 5 19:24:01 linux pppd[7148]: PAP authentication succeeded
    Jun 5 19:24:01 linux pppd[7148]: peer from calling number 00:09:B6:8F:0B:1B authorized
    Jun 5 19:24:01 linux pppd[7148]: local IP address 213.54.207.42
    Jun 5 19:24:01 linux pppd[7148]: remote IP address 62.26.136.17
    Jun 5 19:24:01 linux pppd[7148]: primary DNS address 195.247.247.195
    Jun 5 19:24:01 linux pppd[7148]: secondary DNS address 62.27.27.62
    Jun 5 19:24:02 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
    Jun 5 19:24:02 linux ip-up: /sbin/modify_resolvconf: line 245: /etc/init.d/lwresd: No such file or directory
    Jun 5 19:24:02 linux ip-up:
    Jun 5 19:24:02 linux pppd[7148]: Script /etc/ppp/ip-up finished (pid 7178), status = 0x0
    Jun 5 19:24:07 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
    Jun 5 19:24:15 linux hal.hotplug[7240]: timout(10000 ms) waiting for /class/net/ppp0
    Jun 5 19:30:04 linux su: (to root) mathias on /dev/pts/1
    Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
    Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
    Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
    Jun 5 19:33:46 linux submountd: mount failure, No such device or address
    Jun 5 19:33:46 linux kernel: end_request: I/O error, dev fd0, sector 0
    Jun 5 19:33:46 linux kernel: subfs: unsuccessful attempt to mount media (256)
    Jun 5 19:42:39 linux su: (to root) mathias on /dev/pts/2

    [/SIZE]

  6. #6
    Banned Avatar von Catonga
    Registriert seit
    Nov 1999
    Beiträge
    2.389
    Zitat Zitat von celine
    hier meine log.txt

    err:module:import_dll Library MFC42.DLL (which is needed by L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE") not found
    err:module:LdrInitializeThunk Main exe initialization for L"Z:\\windows\\E\\Programme\\Brennen-Kopieren-Image\\ClonyXXL.EXE" failed, status c0000135

    meine /var/log/messages macht mich leider auch nicht schlauer

    Du benötigst die MFC42.DLL Datei der Microsoft Foundation Classes.
    Installier die am besten in dein drive_c/windows/system/ Verzeichnis und versuche danach
    das Programm noch einmal zu starten.
    Eventuell benötigst du auch einen Registry Eintrag in der ~/.wine/system.reg Datei für diese DLL, genaugenommen ab etwa diesem Abschnitt:
    [Software\\Microsoft\\Windows\\CurrentVersion\\Shar edDLLs]


    Im schlechtesten Fall kommt jetzt eine ganz andere Fehlermeldung, die könntest du dann ebenfalls posten.

  7. #7
    Benutzter Registrierer Avatar von tschloss
    Registriert seit
    Jun 2004
    Ort
    Mannheim
    Beiträge
    3.066
    Ich habe mir den neusten Treiber von ATI runtergeladen. Seither geht´s. (Ich hab ne 9800SE/256)

  8. #8
    Registrierter Benutzer Avatar von celine
    Registriert seit
    Sep 2004
    Ort
    Oranienburg
    Beiträge
    11
    Zitat Zitat von tschloss
    Ich habe mir den neusten Treiber von ATI runtergeladen. Seither geht´s. (Ich hab ne 9800SE/256)
    mit wine oder nur mit linux games?

    nachdem ich die dll ins system kopiert habe ist wie erwartet eine neuer fehler aufgetreten.
    hier meine log.txt:

    fixme:richedit:RichEditANSIWndProc WM_SETFONT: stub
    Geändert von celine (05.06.05 um 23:47 Uhr)

  9. #9
    Benutzter Registrierer Avatar von tschloss
    Registriert seit
    Jun 2004
    Ort
    Mannheim
    Beiträge
    3.066
    Zitat Zitat von celine
    mit wine oder nur mit linux games?

    nachdem ich die dll ins system kopiert habe ist wie erwartet eine neuer fehler aufgetreten.
    hier meine log.txt:

    fixme:richedit:RichEditANSIWndProc WM_SETFONT: stub
    Wine verwende ich nicht.

  10. #10
    Registrierter Benutzer Avatar von celine
    Registriert seit
    Sep 2004
    Ort
    Oranienburg
    Beiträge
    11
    Zitat Zitat von tschloss
    Wine verwende ich nicht.

    nur darum geht es meine thema heist "Probleme mit "Wine, Suse9.3, ATI9700"

    so funktioniert meine grafi auch!

  11. #11
    Linuxzocker Avatar von Fatty
    Registriert seit
    Apr 2001
    Ort
    /dev/bier
    Beiträge
    2.501
    Vielleicht solltest du mal Wine updaten und wie oben schon erwähnt die MFC42.dll nachinstallieren.

    Ohne mehr Infos können wir dir leider auch nicht weiterhelfen!
    Peer-to-Peer-Telefonie mit Java gibt's nicht? Doch: Javafon!

  12. #12
    Registrierter Benutzer
    Registriert seit
    Mar 2004
    Beiträge
    41
    Also ich habe das gleiche Problem. Eine Lösung habe ich auch nicht, aber mit folgendem "Trick" kann ich leben:

    Wenn der Bildschirm nach dem Start von WINE schwarz wird, schalte ich mit <Strg>+<Alt>+<F10> auf eine andere Konsole und dann mit <Strg>+<Alt>+<F7> wieder zurück auf KDE. nach einer Gedenksekunde kommt dann das Bild wieder mit der aufgerufenenen Windows Software.

    Vielleicht hilft's!

Ähnliche Themen

  1. Antworten: 17
    Letzter Beitrag: 23.04.05, 10:21
  2. FC2 + Xinerama + ATI 9600 + nVidia MX4000 PCI
    Von DieTa im Forum X-Konfiguration
    Antworten: 7
    Letzter Beitrag: 27.06.04, 22:53
  3. gentoo cd leider nur mit nvdia treibern?
    Von linuxhanz im Forum Spielen Allgemein
    Antworten: 1
    Letzter Beitrag: 13.02.03, 19:17
  4. ATi und Linux
    Von FraggyTheUndead im Forum Spielen Allgemein
    Antworten: 43
    Letzter Beitrag: 13.06.02, 23:51
  5. Unreal Tournament unter Linux!
    Von would im Forum Spielen Allgemein
    Antworten: 22
    Letzter Beitrag: 15.05.01, 18:38

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •