Anzeige:
Seite 1 von 3 123 LetzteLetzte
Ergebnis 1 bis 15 von 31

Thema: Hilfe! KDE 3.3 startet nach update nicht mehr!

  1. #1
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34

    Hilfe! KDE 3.3 startet nach update nicht mehr!

    Ich habe mir vorhin das UT2004Demo gezogen und weil die "Leistung" desaströs war (so ungefähr 1fps), wollte ich neue nvidia Treiber runterladen. Das habe ich dann via Yast (Suse 9.1) getan. Ich habe mir da alle "installierten und installierbaren" Patches angesehen und die nvidia Treiber ausgewählt. Ich vergaß, dass auch die Kontrollkästchen von vielen anderen patches aktiviert waren, so dass im Endeffekt alles Mögliche heruntergeladen wurde. Ich habe den Computer einfach mal machen lassen. Am Ende bekam ich die Nachricht, ich solle vor dem nächsten booten /sbin/lilo ausführen. Das geht allerdings nicht, da /etc/lilo.conf nicht existiert.
    Wie auch immer, seitdem wird der Bildschirm schwarz kurz bevor KDE gestartet wird. In runlevel 3 kann ich starten, allerdings weiß ich nicht, was ich da tun muss damit es wieder läuft.

    Bitte helft mir, will mein schönes KDE wiederhaben!!!

    Vielen Dank schonmal
    Metty

    PS: Ich weiß net obs wichtig ist, aber: Ich wollte nach dem update auch neue nforce Treiber installieren (hab also ein nforce board), lud die Datei von nvidia.com runter, führte sie mit sh aus und nach einiger Zeit brach der ab, weil er den kernel Quellcode nicht finden konnte oder etwas Ähnliches.

  2. #2
    Tux Jünger Avatar von kamikasi
    Registriert seit
    Feb 2005
    Beiträge
    12
    Kann es sein, dass du statt Lilo Grub nutzt? Ist bei Suse eigentlich voreingestellt...
    Dann kann er die lilo.conf natürlich nicht finden.

    Wenn du in runlevel 3 mal startx eingibst und Fehler auftauchen poste die doch bitte mal hier.
    Karsten

    In a free world there is no need for Windows and Gates...

  3. #3
    Registrierter Benutzer
    Registriert seit
    May 2004
    Beiträge
    1.567

    Arrow

    Na ja du wirst Grub benutzen, das ist jetzt Standard bei SuSE und wenn du die GESAMTE Meldung vom YaST gelesen hättest wäre dir auch nicht entgangen, daß da steht "Falls sie den LiLo Bootmanager verwenden müssen Sie ... *usw.* "

  4. #4
    not yet perfect in Linux Avatar von Dirk.M
    Registriert seit
    Sep 2001
    Ort
    Kitzingen
    Beiträge
    418
    Hallo Metty,
    mir ist es mal so gegangen, als ich ein Onlineupdate mit Yast (YOU) durchgeführt und auch nicht so richtig geschaut habe, das KDE-Teile auf 3.2 "geupdatet" wurden und KDE nicht mehr wollte.
    Gehe nach init 3 und update KDE wieder auf 3.3

    Gruß Dirk
    Support: Wie kann ich Ihnen helfen? User: Ich arbeite mit Windows.
    Support: Ja? User: Ich habe ein Problem.
    Support: Das sagten sie bereits!

  5. #5
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34
    Zitat Zitat von f_m
    Na ja du wirst Grub benutzen, das ist jetzt Standard bei SuSE und wenn du die GESAMTE Meldung vom YaST gelesen hättest wäre dir auch nicht entgangen, daß da steht "Falls sie den LiLo Bootmanager verwenden müssen Sie ... *usw.* "
    Ich HABE die gesamte Meldung gelesen. Nur wusste ich selbst nicht so genau, welcher Bootmanager eingestellt ist, ich dachte halt, es wäre lilo. Aber es ist wohl doch grub.
    Übrigens: startx hatte ich schon ausprobiert, da kommt dann wieder der schwarze Bildschirm. startkde gibt jede Menge Fehlermeldungen. Kann mir jemand bitte den Unterschied erklären? Zu den Befehlen gibts keine man Einträge.
    Ich werde mal Dirks Idee folgen, das klingt sehr einleuchtend, ich hatte auch erst vor kurzem auf KDE 3.3 geupdated. Muss nur noch rausfinden, wie man das aus der bash heraus macht *ähem*
    <System: Athlon XP2.6+, GeForce FX 5700, SuSE 10>

  6. #6
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34
    Hatte vorhin schon viel im Web gesucht, aber ich werde immer noch nicht so recht schlau. Soll ich APT benutzen, um KDE upzudaten oder wie am Besten????
    <System: Athlon XP2.6+, GeForce FX 5700, SuSE 10>

  7. #7
    Registrierter Benutzer
    Registriert seit
    May 2004
    Beiträge
    1.567

    Question

    wir brauchen mal Infos:

    1) welche Graphikkarte hast du?
    3) was steht in der /var/log/Xorg.0.log? (bitte vollständig hier posten)
    4) finden sich direkt nach Auftreten des Probs Fehlermeldungen in /var/log/messages?

  8. #8
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34
    Zitat Zitat von f_m
    wir brauchen mal Infos:

    1) welche Graphikkarte hast du?
    3) was steht in der /var/log/Xorg.0.log? (bitte vollständig hier posten)
    4) finden sich direkt nach Auftreten des Probs Fehlermeldungen in /var/log/messages?
    1) GeForce FX 5700
    War 2) wichtig? Den hast du nämlich vergessen
    3) ööööh, wirklich wörtlich "Xorg"? Bei mir gibts nur XFree86
    4) Ich poste die letzten Einträge hier (/var/log/messages):

    Code:
    Feb 23 19:19:46 linux syslogd 1.4.1: restart.
    Feb 23 19:19:47 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 23 19:19:49 linux sshd[5115]: Server listening on :: port 22.
    Feb 23 19:19:50 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
    Feb 23 19:19:50 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/common to avoid this warning.
    Feb 23 19:19:50 linux [powersaved][5447]: WARNING in Function ACPI_Interface; line 26: could not set battery alarm, you may need to force polling mode.
    Feb 23 19:19:50 linux [powersaved][5447]: resmgr: server response code 200
    Feb 23 19:19:50 linux [powersave_proxy][5450]: WARNING: hdparm returned error 5
    Feb 23 19:19:50 linux [powersave_proxy][5450]: WARNING: hdparm returned error 5
    Feb 23 19:19:51 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Feb 23 19:19:51 linux kernel: Inspecting /boot/System.map-2.6.5-7.145-default
    Feb 23 19:19:52 linux kernel: Loaded 24305 symbols from /boot/System.map-2.6.5-7.145-default.
    Feb 23 19:19:52 linux kernel: Symbols match kernel version 2.6.5.
    Feb 23 19:19:52 linux kernel: No module symbols loaded - kernel modules not enabled. 
    Feb 23 19:19:52 linux kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
    Feb 23 19:19:52 linux kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
    Feb 23 19:19:52 linux kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
    Feb 23 19:19:52 linux kernel: eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
    Feb 23 19:19:52 linux kernel: usbcore: registered new driver usbfs
    Feb 23 19:19:52 linux kernel: usbcore: registered new driver hub
    Feb 23 19:19:52 linux kernel: SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ff65:9ac9 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=0 
    Feb 23 19:19:52 linux kernel: NET: Registered protocol family 17
    Feb 23 19:19:52 linux kernel: SFW2-IN-ILL-TARGET IN=eth0 OUT= MAC=00:0e:a6:65:9a:c9:00:50:18:14:56:d4:08:00 SRC=217.237.151.225 DST=192.168.123.178 LEN=151 TOS=0x00 PREC=0x00 TTL=56 ID=28309 PROTO=UDP SPT=53 DPT=1024 LEN=131 
    Feb 23 19:19:52 linux kernel: SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ff65:9ac9 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 
    Feb 23 19:19:52 linux kernel: SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:020e:a6ff:fe65:9ac9 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 
    Feb 23 19:19:52 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Feb 23 19:19:52 linux kernel: agpgart: Detected NVIDIA nForce2 chipset
    Feb 23 19:19:52 linux kernel: agpgart: Maximum main memory to use for agp memory: 439M
    Feb 23 19:19:52 linux kernel: agpgart: AGP aperture is 128M @ 0xd0000000
    Feb 23 19:19:52 linux kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
    Feb 23 19:19:52 linux kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
    Feb 23 19:19:52 linux kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
    Feb 23 19:19:52 linux kernel: ehci_hcd 0000:00:02.2: irq 11, pci mem e2d4f000
    Feb 23 19:19:52 linux kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    Feb 23 19:19:52 linux kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
    Feb 23 19:19:52 linux kernel: ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
    Feb 23 19:19:52 linux kernel: usb usb1: Product: EHCI Host Controller
    Feb 23 19:19:52 linux kernel: usb usb1: Manufacturer: Linux 2.6.5-7.145-default ehci_hcd
    Feb 23 19:19:52 linux kernel: usb usb1: SerialNumber: 0000:00:02.2
    Feb 23 19:19:52 linux kernel: hub 1-0:1.0: USB hub found
    Feb 23 19:19:52 linux kernel: hub 1-0:1.0: 6 ports detected
    Feb 23 19:19:52 linux kernel: SFW2-IN-ILL-TARGET IN=eth0 OUT= MAC=00:0e:a6:65:9a:c9:00:50:18:14:56:d4:08:00 SRC=217.237.150.225 DST=192.168.123.178 LEN=151 TOS=0x00 PREC=0x00 TTL=56 ID=63694 PROTO=UDP SPT=53 DPT=1025 LEN=131 
    Feb 23 19:19:52 linux kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    Feb 23 19:19:52 linux kernel: ohci_hcd: block sizes: ed 64 td 64
    Feb 23 19:19:52 linux kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    Feb 23 19:19:52 linux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
    Feb 23 19:19:52 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
    Feb 23 19:19:52 linux kernel: ohci_hcd 0000:00:02.0: irq 11, pci mem e2d51000
    Feb 23 19:19:52 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Feb 23 19:19:52 linux kernel: usb usb2: Product: OHCI Host Controller
    Feb 23 19:19:52 linux kernel: usb usb2: Manufacturer: Linux 2.6.5-7.145-default ohci_hcd
    Feb 23 19:19:52 linux kernel: usb usb2: SerialNumber: 0000:00:02.0
    Feb 23 19:19:52 linux kernel: hub 2-0:1.0: USB hub found
    Feb 23 19:19:52 linux kernel: hub 2-0:1.0: 3 ports detected
    Feb 23 19:19:52 linux kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
    Feb 23 19:19:52 linux kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
    Feb 23 19:19:52 linux kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
    Feb 23 19:19:52 linux kernel: ohci_hcd 0000:00:02.1: irq 5, pci mem e2d86000
    Feb 23 19:19:52 linux kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    Feb 23 19:19:52 linux kernel: usb usb3: Product: OHCI Host Controller
    Feb 23 19:19:52 linux kernel: usb usb3: Manufacturer: Linux 2.6.5-7.145-default ohci_hcd
    Feb 23 19:19:52 linux kernel: usb usb3: SerialNumber: 0000:00:02.1
    Feb 23 19:19:52 linux kernel: hub 3-0:1.0: USB hub found
    Feb 23 19:19:52 linux kernel: hub 3-0:1.0: 3 ports detected
    Feb 23 19:19:52 linux kernel: gameport: pci0000:01:07.1 speed 864 kHz
    Feb 23 19:19:52 linux kernel: SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:020e:a6ff:fe65:9ac9 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 
    Feb 23 19:19:52 linux kernel: usb 3-2: new low speed USB device using address 2
    Feb 23 19:19:52 linux kernel: usb 3-2: Product: Combo Mouse
    Feb 23 19:19:52 linux kernel: usb 3-2: Manufacturer: Combo Mouse
    Feb 23 19:19:52 linux kernel: SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:020e:a6ff:fe65:9ac9 DST=ff02:0000:0000:0000:0000:0001:ff65:9ac9 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=0 
    Feb 23 19:19:52 linux kernel: ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
    Feb 23 19:19:52 linux kernel: ACPI: Power Button (FF) [PWRF]
    Feb 23 19:19:52 linux kernel: ACPI: Processor [CPU0] (supports C1)
    Feb 23 19:19:52 linux kernel: powernow-k8: Processor cpuid 6a0 not supported
    Feb 23 19:19:52 linux kernel: powernow: PowerNOW! Technology present. Can scale: nothing.
    Feb 23 19:19:52 linux kernel: SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:020e:a6ff:fe65:9ac9 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 
    Feb 23 19:19:52 linux kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    Feb 23 19:19:52 linux kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
    Feb 23 19:19:52 linux kernel: ide: failed opcode was: 0xef
    Feb 23 19:19:52 linux kernel: hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    Feb 23 19:19:52 linux kernel: hdb: drive_cmd: error=0x04 { DriveStatusError }
    Feb 23 19:19:52 linux kernel: ide: failed opcode was: 0xef
    Feb 23 19:19:52 linux kernel: hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
    Feb 23 19:19:52 linux kernel: hdb: task_no_data_intr: error=0x04 { DriveStatusError }
    Feb 23 19:19:52 linux kernel: ide: failed opcode was: 0xef
    Feb 23 19:19:52 linux kernel: eth0: no IPv6 routers present
    Feb 23 19:19:52 linux kernel: usbcore: registered new driver hiddev
    Feb 23 19:19:52 linux kernel: input: USB HID v1.10 Mouse [Combo Mouse Combo Mouse] on usb-0000:00:02.1-2
    Feb 23 19:19:52 linux kernel: usbcore: registered new driver hid
    Feb 23 19:19:52 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Feb 23 19:19:53 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 23 19:19:54 linux kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
    Feb 23 19:19:54 linux kernel: parport0: irq 7 detected
    Feb 23 19:19:54 linux kernel: lp0: using parport0 (polling).
    Feb 23 19:19:54 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
    Feb 23 19:19:54 linux kernel: usbcore: registered new driver usbserial
    Feb 23 19:19:54 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    Feb 23 19:19:55 linux /usr/sbin/cron[6480]: (CRON) STARTUP (fork ok) 
    Feb 23 19:19:55 linux kernel: Non-volatile memory driver v1.2
    Feb 23 19:19:55 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 23 19:19:55 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 23 19:19:55 linux kernel: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
    Feb 23 19:19:55 linux kernel: Uniform CD-ROM driver Revision: 3.20
    Feb 23 19:19:56 linux /etc/hotplug/block.agent[6520]: grep: /sys/class/scsi_host/ide1/proc_name: No such file or directory
    Feb 23 19:19:56 linux /etc/hotplug/block.agent[6520]: grep: /sys/class/scsi_host/ide1/proc_name: No such file or directory
    Feb 23 19:19:56 linux kernel: SCSI subsystem initialized
    Feb 23 19:19:56 linux kernel: st: Version 20040318, fixed bufsize 32768, s/g segs 256
    Feb 23 19:19:56 linux /etc/hotplug/block.agent[6520]: new block device /block/hdc
    Feb 23 19:19:56 linux kernel: BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
    Feb 23 19:19:57 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Geändert von Mettyman (23.02.05 um 20:11 Uhr)
    <System: Athlon XP2.6+, GeForce FX 5700, SuSE 10>

  9. #9
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34
    Hier noch der nvidia-installer log, falls es von Interesse sein sollte, sieht meiner Meinung nach aber gut aus:

    Code:
    nvidia-installer log file '/var/log/nvidia-installer.log'
    creation time: Wed Feb 23 00:10:32 2005
    
    option status:
      license pre-accepted    : true
      update                  : false
      force update            : false
      expert                  : false
      uninstall               : false
      driver info             : false
      no precompiled interface: false
      no ncurses color        : false
      query latest driver ver : false
      OpenGL header files     : false
      no questions            : true
      silent                  : true
      XFree86 install prefix  : /usr/X11R6
      OpenGL install prefix   : /usr
      Installer install prefix: /usr
      kernel source path      : (not specified)
      kernel install path     : (not specified)
      proc mount point        : /proc
      ui                      : none
      tmpdir                  : /tmp
      ftp site                : ftp://download.nvidia.com
    
    Using built-in stream user interface
    -> License accepted by command line option.
    -> A precompiled kernel interface for kernel '2.6.5-7.111.5-default' has been
       found here:
       /lib/modules/precompiled/2.6.5-7.111.5-default/nvidia/gfx//nv-linux.o-1.0-53
       36.pre.
       executing: 'cd ./usr/src/nv; /usr/bin/ld -d -r -o nvidia.ko precompiled-nv-l
       inux.o nv-kernel.o'...
    -> Kernel module linked successfully.
    -> Installing both new and classic TLS OpenGL libraries (but only new XFree86
       TLS libraries.
    -> Installing 'NVIDIA Accelerated Graphics Driver for Linux-x86' (1.0-5336):
       executing: './usr/src/nv/makedevices.sh'...
       executing: '/sbin/ldconfig'...
       executing: '/sbin/depmod -aq'...
    -> done.
    -> Driver file installation is complete.
    -> Running post-install sanity check:
    -> done.
    -> Sanity check passed.
    -> Shared memory test passed.
    -> Installation of the NVIDIA Accelerated Graphics Driver for Linux-x86
       (version: 1.0-5336) is now complete.  On SuSE Linux/United Linux please use
       SaX2 now to enable the NVIDIA driver.
    Geändert von Mettyman (23.02.05 um 20:10 Uhr)
    <System: Athlon XP2.6+, GeForce FX 5700, SuSE 10>

  10. #10
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34

    Nforce Installer

    Zuletzt der nvidia-nforce installer log, sieht weniger positiv aus. Die nforce Treiber wollte ich übrigens nach dem YOU installieren, er brach aber (offensichtlich) ab...

    Code:
    nforce-installer log file '/var/log/nvidia-nforce-installer.log'
    creation time: Wed Feb 23 00:16:12 2005
    
    option status:
      license pre-accepted      : false
      expert                    : false
      uninstall                 : false
      driver info               : false
      no precompiled interface  : false
      no ncurses color          : false
      no questions              : false
      silent                    : false
      Installer install prefix  : /usr
      kernel source path        : (not specified)
      net kernel install path   : (not specified)
      audio kernel install path : (not specified)
      proc mount point          : /proc
      ui                        : (not specified)
      tmpdir                    : /tmp
    
    Using: nvidia-installer ncurses user interface
    -> Found package NVIDIA audio driver for Linux-x86
    -> Found package NVIDIA network driver for Linux-x86
    -> Please select packages for installation:
       Selections:
       NVIDIA audio driver for Linux-x86 (1.0-1)
       NVIDIA network driver for Linux-x86 (1.0-10)
    -> Starting install of NVIDIA audio driver for Linux-x86
    -> Checking for loaded module nvsound
    -> Checking for loaded module nvaudio
    -> License accepted.
    -> Skipping check for conflicting rpms.
    -> /proc/version is Linux version 2.6.5-7.111.5-default (geeko@buildhost) (gcc
       version 3.3.3 (SuSE Linux)) #1 Wed Nov 17 11:08:17 UTC 2004
    -> No precompiled kernel interface was found to match your kernel; this means
       that the installer will need to compile a new kernel interface.
    ERROR: Unable to find the kernel source tree for the currently running kernel. 
           Please make sure you have installed the kernel source files for your
           kernel; on Red Hat Linux systems, for example, be sure you have the
           'kernel-source' rpm installed.  If you know the correct kernel source
           files are installed, you may specify the kernel source path with the
           '--kernel-source-path' commandline option.
    ERROR: Installation of the audio driver has failed.  Please see the file
           '/var/log/nvidia-nforce-installer.log' for details.  You may find
           suggestions on  fixing installation problems in the README available on
           the Linux driver download page at www.nvidia.com.
    -> Starting install of NVIDIA network driver for Linux-x86
    -> Checking for loaded module nvnet
    -> Checking for loaded module forcedeth
    -> Trying to remove loaded module forcedeth
    -> License not accepted, aborting installation of network driver.
    Geändert von Mettyman (23.02.05 um 20:10 Uhr)
    <System: Athlon XP2.6+, GeForce FX 5700, SuSE 10>

  11. #11
    Registrierter Benutzer
    Registriert seit
    Sep 2002
    Beiträge
    351
    Moin,
    kannst du mal deine XFree86config hier posten?
    Hast du auch den nvidia graka Treiber installiert? Wenn ja hast du auch den richtigen Treiber auch in die Xfree86.config eingetragen?
    Imho wurde der nvidia Treiber(für die Graka), bei dir richtig installiert. Du solltest ihn mit modprobe nvidia laden, und dann auch den richtigen Treiber, wie oben schon geschrieben in deine XFree86config eitragen.

    Mfg,
    ncoder.

    PS: Wegen nvidia Treiber installation kannst du auch die Sufu hier im Forum benutzen, das Thema wurde schon 100x besprochen.
    Lenovo Thinkpad T500 - Hybrid Grafik Intel 4500 MHD, ATI 3650 - CPU P8600 Centrino 2@2.4 Ghz - WSXGA+ Display@1680x1050
    http://www.duckhome.de
    http://www.nachdenkseiten.de

  12. #12
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34
    Hier die Datei. Also installiert habe ich die Treiber, habe aber nix von Hand eingetragen.

    Code:
    # /.../
    # SaX generated XFree86 config file
    # Created on: 2004-12-01T17:58:47+0100.
    #
    # Version: 4.8
    # Contact: Marcus Schaefer <sax@suse.de>, 2002
    #
    # Automatically generated by [ISaX] (4.8)
    # PLEASE DO NOT EDIT THIS FILE!
    #
    
    Section "Files"
      FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/local"
      FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
      FontPath     "/usr/X11R6/lib/X11/fonts/URW"
      FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
      FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
      FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
      FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
      FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
      FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
      FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/CID"
      FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
      FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
      FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
      FontPath     "/opt/kde3/share/fonts"
      InputDevices "/dev/ttyS0"
      InputDevices "/dev/ttyS1"
      InputDevices "/dev/ttyS2"
      InputDevices "/dev/ttyS3"
      InputDevices "/dev/ttyS4"
      InputDevices "/dev/ttyS5"
      InputDevices "/dev/ttyS6"
      InputDevices "/dev/ttyS7"
      InputDevices "/dev/ttyS8"
      InputDevices "/dev/psaux"
      InputDevices "/dev/logibm"
      InputDevices "/dev/sunmouse"
      InputDevices "/dev/atibm"
      InputDevices "/dev/amigamouse"
      InputDevices "/dev/atarimouse"
      InputDevices "/dev/inportbm"
      InputDevices "/dev/gpmdata"
      InputDevices "/dev/mouse"
      InputDevices "/dev/usbmouse"
      InputDevices "/dev/adbmouse"
      InputDevices "/dev/input/mice"
      InputDevices "/dev/input/event0"
      InputDevices "/dev/pointer0"
      InputDevices "/dev/pointer1"
      InputDevices "/dev/pointer2"
      InputDevices "/dev/pointer3"
    EndSection
    
    Section "ServerFlags"
      Option       "AllowMouseOpenFail"
    EndSection
    
    Section "Module"
      Load         "glx"
      Load         "dbe"
      Load         "extmod"
      Load         "freetype"
      Load         "v4l"
      Load         "type1"
      Load         "speedo"
    EndSection
    
    Section "InputDevice"
      Driver       "Keyboard"
      Identifier   "Keyboard[0]"
      Option       "Protocol" "Standard"
      Option       "XkbLayout" "de"
      Option       "XkbModel" "pc105"
      Option       "XkbRules" "xfree86"
      Option       "XkbVariant" "nodeadkeys"
    EndSection
    
    
    Section "InputDevice"
      Driver       "mouse"
      Identifier   "Mouse[1]"
      Option       "ButtonNumber" "2"
      Option       "Buttons" "5"
      Option       "Device" "/dev/mouse"
      Option       "Name" "Autodetection"
      Option       "Protocol" "ExplorerPS/2"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    
    Section "Monitor"
      Option       "CalcAlgorithm" "CheckDesktopGeometry"
      DisplaySize  320 240
      HorizSync    28-72
      Identifier   "Monitor[0]"
      ModelName    "77E"
      VendorName   "ACER"
      VertRefresh  50-120
      UseModes     "Modes[0]"
    EndSection
    
    
    Section "Modes"
      Identifier   "Modes[0]"
      Modeline 	"1280x1024" 121.35 1280 1368 1504 1728 1024 1025 1028 1064
      Modeline 	"640x480" 23.06 640 656 720 800 480 481 484 497
      Modeline 	"640x480" 27.74 640 664 728 816 480 481 484 500
      Modeline 	"640x480" 32.64 640 672 736 832 480 481 484 503
      Modeline 	"640x480" 36.97 640 672 736 832 480 481 484 505
      Modeline 	"640x480" 42.22 640 680 744 848 480 481 484 508
      Modeline 	"640x480" 46.80 640 680 744 848 480 481 484 511
      Modeline 	"640x480" 51.43 640 680 744 848 480 481 484 514
    EndSection
    
    
    Section "Screen"
      DefaultDepth 16
      SubSection "Display"
        Depth      15
        Modes      "1280x1024" 
      EndSubSection
      SubSection "Display"
        Depth      16
        Modes      "1280x1024" 
      EndSubSection
      SubSection "Display"
        Depth      24
        Modes      "1280x1024" 
      EndSubSection
      SubSection "Display"
        Depth      32
        Modes      "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      8
        Modes      "1280x1024" 
      EndSubSection
      Device       "Device[0]"
      Identifier   "Screen[0]"
      Monitor      "Monitor[0]"
    EndSection
    
    
    Section "Device"
      BoardName    "0x0342"
      BusID        "2:0:0"
      Driver       "nvidia"
      Identifier   "Device[0]"
      Screen       0
      VendorName   "NVidia"
    EndSection
    
    
    Section "ServerLayout"
      Identifier   "Layout[all]"
      InputDevice  "Keyboard[0]" "CoreKeyboard"
      InputDevice  "Mouse[1]" "CorePointer"
      Option       "Clone" "off"
      Option       "Xinerama" "off"
      Screen       "Screen[0]"
    EndSection
    
    Section "DRI"
        Group      "video"
        Mode       0660
    EndSection
    Geändert von Mettyman (23.02.05 um 20:05 Uhr)
    <System: Athlon XP2.6+, GeForce FX 5700, SuSE 10>

  13. #13
    Registrierter Benutzer
    Registriert seit
    May 2004
    Beiträge
    1.567

    Arrow

    Zitat Zitat von Mettyman
    1) GeForce FX 5700
    War 2) wichtig? Den hast du nämlich vergessen
    3) ööööh, wirklich wörtlich "Xorg"? Bei mir gibts nur XFree86
    2) wäre die Frage nach der Treiberversion gewesen ...
    3) ja poste die /var/log/XFree86.0.log

    aber bitte in Code-Tags einfügen
    so: (code) Text (/code) ...mit eckigen Klammern!

  14. #14
    Registrierter Benutzer Avatar von Mettyman
    Registriert seit
    Feb 2005
    Beiträge
    34
    XFree86.0.log, sorry das mit den Tags hatte ich vergessen ...

    EDIT: So, sieht doch jetzt viel ordentlicher aus hier

    Code:
    This is a pre-release version of XFree86, and is not supported in any
    way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
    to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
    please check the latest version in the XFree86 CVS repository
    (http://www.XFree86.Org/cvs).
    
    XFree86 Version 4.3.99.902 (4.4.0 RC 2)
    Release Date: 18 December 2003
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: SuSE Linux [ELF] SuSE
    Current Operating System: Linux linux 2.6.5-7.145-default #1 Thu Jan 27 09:19:29 UTC 2005 i686
    Build Date: 23 August 2004
    Changelog Date: 29 February 2004
    	Before reporting problems, check http://www.XFree86.Org/
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Wed Feb 23 00:22:52 2005
    (==) Using config file: "/etc/X11/XF86Config"
    (==) ServerLayout "Layout[all]"
    (**) |-->Screen "Screen[0]" (0)
    (**) |   |-->Monitor "Monitor[0]"
    (**) |   |-->Device "Device[0]"
    (**) |-->Input Device "Keyboard[0]"
    (**) Option "Protocol" "Standard"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "pc105"
    (**) XKB: model: "pc105"
    (**) Option "XkbLayout" "de"
    (**) XKB: layout: "de"
    (**) Option "XkbVariant" "nodeadkeys"
    (**) XKB: variant: "nodeadkeys"
    (==) Keyboard: CustomKeycode disabled
    (**) |-->Input Device "Mouse[1]"
    (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/75dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/100dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/Type1" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/japanese" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/kwintv" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/misc" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/75dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/100dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/misc/sgi" does not exist.
    	Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist.
    	Entry deleted from font path.
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni:unscaled,/usr/X11R6/lib/X11/fonts/CID,/opt/kde3/share/fonts"
    (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (**) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/mouse,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0,/dev/pointer0,/dev/pointer1,/dev/pointer2,/dev/pointer3"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (**) Option "AllowMouseOpenFail"
    (**) Option "Xinerama" "off"
    (WW) Open APM failed (/dev/apm_bios) (No such device)
    (II) Module ABI versions:
    	XFree86 ANSI C Emulation: 0.2
    	XFree86 Video Driver: 0.7
    	XFree86 XInput driver : 0.4
    	XFree86 Server Extension : 0.2
    	XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    	compiled for 4.3.99.902, module version = 1.0.0
    	Module class: XFree86 Font Renderer
    	ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    	compiled for 4.3.99.902, module version = 1.0.0
    	ABI class: XFree86 Video Driver, version 0.7
    (++) using VT number 7
    
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x80020044, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
    (II) PCI: 00:00:1: chip 10de,01ea card 1043,80ac rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
    (II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
    (II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
    (II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
    (II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
    (II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
    (II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
    (II) PCI: 01:07:0: chip 1102,0002 card 1102,8027 rev 06 class 04,01,00 hdr 80
    (II) PCI: 01:07:1: chip 1102,7002 card 1102,0020 rev 06 class 09,80,00 hdr 80
    (II) PCI: 02:00:0: chip 10de,0342 card 0000,0000 rev a1 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
    (II) Bus 1 I/O range:
    	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 2 non-prefetchable memory range:
    	[0] -1	0	0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
    (II) Bus 2 prefetchable memory range:
    	[0] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
    (--) PCI:*(2:0:0) nVidia Corporation GeForce FX 5700 rev 161, Mem @ 0xe0000000/24, 0xd8000000/27
    (II) Addressable bus resource ranges are
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
    (II) Active PCI resource ranges:
    	[0] -1	0	0xe2001000 - 0xe2001fff (0x1000) MX[B]
    	[1] -1	0	0xe2000000 - 0xe20000ff (0x100) MX[B]
    	[2] -1	0	0xe2004000 - 0xe2004fff (0x1000) MX[B]
    	[3] -1	0	0xe2003000 - 0xe2003fff (0x1000) MX[B]
    	[4] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
    	[5] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[6] -1	0	0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    	[7] -1	0	0x0000d400 - 0x0000d407 (0x8) IX[B]
    	[8] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[9] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
    	[10] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
    	[11] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
    	[0] -1	0	0xe2001000 - 0xe2001fff (0x1000) MX[B]
    	[1] -1	0	0xe2000000 - 0xe20000ff (0x100) MX[B]
    	[2] -1	0	0xe2004000 - 0xe2004fff (0x1000) MX[B]
    	[3] -1	0	0xe2003000 - 0xe2003fff (0x1000) MX[B]
    	[4] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
    	[5] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[6] -1	0	0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    	[7] -1	0	0x0000d400 - 0x0000d407 (0x8) IX[B]
    	[8] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[9] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
    	[10] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
    	[11] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xe2001000 - 0xe2001fff (0x1000) MX[B]
    	[6] -1	0	0xe2000000 - 0xe20000ff (0x100) MX[B]
    	[7] -1	0	0xe2004000 - 0xe2004fff (0x1000) MX[B]
    	[8] -1	0	0xe2003000 - 0xe2003fff (0x1000) MX[B]
    	[9] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
    	[10] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[11] -1	0	0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
    	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[14] -1	0	0x0000d400 - 0x0000d407 (0x8) IX[B]
    	[15] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[16] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
    	[17] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
    	[18] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    	compiled for 4.0.2, module version = 1.0.5336
    	Module class: XFree86 Server Extension
    	ABI class: XFree86 Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    	compiled for 4.3.99.902, module version = 1.0.0
    	Module class: XFree86 Server Extension
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    	compiled for 4.3.99.902, module version = 1.0.0
    	Module class: XFree86 Server Extension
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
    	compiled for 4.3.99.902, module version = 2.1.0
    	Module class: XFree86 Font Renderer
    	ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "v4l"
    (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
    (II) Module v4l: vendor="The XFree86 Project"
    	compiled for 4.3.99.902, module version = 0.0.1
    	ABI class: XFree86 Video Driver, version 0.7
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    	compiled for 4.3.99.902, module version = 1.0.2
    	Module class: XFree86 Font Renderer
    	ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "speedo"
    (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
    (II) Module speedo: vendor="The XFree86 Project"
    	compiled for 4.3.99.902, module version = 1.0.1
    	Module class: XFree86 Font Renderer
    	ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Speedo
    (II) LoadModule: "nvidia"
    (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
    Geändert von Mettyman (23.02.05 um 20:13 Uhr)
    <System: Athlon XP2.6+, GeForce FX 5700, SuSE 10>

  15. #15
    Registrierter Benutzer
    Registriert seit
    Sep 2002
    Beiträge
    351
    Also deine XFree86config schaut gut aus. Was sagt ein "lsmod"(als root). Ist das modul nvidia geladen? Hast du in deinem home Verzeichnis eine .xinitrc? Wenn nein dann erstelle mal eine und schreib folgendes rein: exec fvwm2
    Anschliessend speichern und dann ein startx. Bringt das was?

    ncoder.
    Lenovo Thinkpad T500 - Hybrid Grafik Intel 4500 MHD, ATI 3650 - CPU P8600 Centrino 2@2.4 Ghz - WSXGA+ Display@1680x1050
    http://www.duckhome.de
    http://www.nachdenkseiten.de

Ähnliche Themen

  1. Antworten: 7
    Letzter Beitrag: 20.03.10, 12:57
  2. Antworten: 3
    Letzter Beitrag: 28.01.05, 01:57
  3. Zu bloed zum KDE Update. Hilfe bitte!
    Von Alarith im Forum Windowmanager
    Antworten: 1
    Letzter Beitrag: 16.01.04, 19:48
  4. mein vorerst letzte aber schon so langes Problem, mein KDE *argh*
    Von gismoscherer im Forum Linux Allgemein
    Antworten: 3
    Letzter Beitrag: 07.03.03, 09:04
  5. KDE 2.0 auf KDE 2.2.2 bei SUSE 7.0 updaten
    Von 2001 im Forum Windowmanager
    Antworten: 0
    Letzter Beitrag: 10.05.02, 09:48

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •